blob: 989b2e6a4451599e6c8eef3bfea95d37f82694d4 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __CONTEXT_H__
#define __CONTEXT_H__
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'gp_regs'
* structure at their correct offsets.
******************************************************************************/
#define CTX_GPREGS_OFFSET 0x0
#define CTX_GPREG_X0 0x0
#define CTX_GPREG_X1 0x8
#define CTX_GPREG_X2 0x10
#define CTX_GPREG_X3 0x18
#define CTX_GPREG_X4 0x20
#define CTX_GPREG_X5 0x28
#define CTX_GPREG_X6 0x30
#define CTX_GPREG_X7 0x38
#define CTX_GPREG_X8 0x40
#define CTX_GPREG_X9 0x48
#define CTX_GPREG_X10 0x50
#define CTX_GPREG_X11 0x58
#define CTX_GPREG_X12 0x60
#define CTX_GPREG_X13 0x68
#define CTX_GPREG_X14 0x70
#define CTX_GPREG_X15 0x78
#define CTX_GPREG_X16 0x80
#define CTX_GPREG_X17 0x88
#define CTX_GPREG_X18 0x90
#define CTX_GPREG_SP_EL0 0x98
#define CTX_GPREG_LR 0xa0
/* Unused space to allow registers to be stored as pairs */
#define CTX_GPREGS_END 0xb0
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'el3_state'
* structure at their correct offsets. Note that some of the registers are only
* 32-bits wide but are stored as 64-bit values for convenience
******************************************************************************/
#define CTX_EL3STATE_OFFSET (CTX_GPREGS_OFFSET + CTX_GPREGS_END)
#define CTX_EXCEPTION_SP 0x0
#define CTX_RUNTIME_SP 0x8
#define CTX_SPSR_EL3 0x10
#define CTX_ELR_EL3 0x18
#define CTX_SCR_EL3 0x20
#define CTX_SCTLR_EL3 0x28
#define CTX_CPTR_EL3 0x30
/* Unused space to allow registers to be stored as pairs */
#define CTX_CNTFRQ_EL0 0x40
#define CTX_MAIR_EL3 0x48
#define CTX_TCR_EL3 0x50
#define CTX_TTBR0_EL3 0x58
#define CTX_DAIF_EL3 0x60
#define CTX_VBAR_EL3 0x68 /* Currently unused */
#define CTX_EL3STATE_END 0x70
/*******************************************************************************
* Constants that allow assembler code to access members of and the
* 'el1_sys_regs' structure at their correct offsets. Note that some of the
* registers are only 32-bits wide but are stored as 64-bit values for
* convenience
******************************************************************************/
#define CTX_SYSREGS_OFFSET (CTX_EL3STATE_OFFSET + CTX_EL3STATE_END)
#define CTX_SPSR_EL1 0x0
#define CTX_ELR_EL1 0x8
#define CTX_SPSR_ABT 0x10
#define CTX_SPSR_UND 0x18
#define CTX_SPSR_IRQ 0x20
#define CTX_SPSR_FIQ 0x28
#define CTX_SCTLR_EL1 0x30
#define CTX_ACTLR_EL1 0x38
#define CTX_CPACR_EL1 0x40
#define CTX_CSSELR_EL1 0x48
#define CTX_SP_EL1 0x50
#define CTX_ESR_EL1 0x58
#define CTX_TTBR0_EL1 0x60
#define CTX_TTBR1_EL1 0x68
#define CTX_MAIR_EL1 0x70
#define CTX_AMAIR_EL1 0x78
#define CTX_TCR_EL1 0x80
#define CTX_TPIDR_EL1 0x88
#define CTX_TPIDR_EL0 0x90
#define CTX_TPIDRRO_EL0 0x98
#define CTX_DACR32_EL2 0xa0
#define CTX_IFSR32_EL2 0xa8
#define CTX_PAR_EL1 0xb0
#define CTX_FAR_EL1 0xb8
#define CTX_AFSR0_EL1 0xc0
#define CTX_AFSR1_EL1 0xc8
#define CTX_CONTEXTIDR_EL1 0xd0
#define CTX_VBAR_EL1 0xd8
#define CTX_CNTP_CTL_EL0 0xe0
#define CTX_CNTP_CVAL_EL0 0xe8
#define CTX_CNTV_CTL_EL0 0xf0
#define CTX_CNTV_CVAL_EL0 0xf8
#define CTX_CNTKCTL_EL1 0x100
#define CTX_FP_FPEXC32_EL2 0x108
#define CTX_SYSREGS_END 0x110
/*******************************************************************************
* Constants that allow assembler code to access members of and the 'fp_regs'
* structure at their correct offsets.
******************************************************************************/
#define CTX_FPREGS_OFFSET (CTX_SYSREGS_OFFSET + CTX_SYSREGS_END)
#define CTX_FP_Q0 0x0
#define CTX_FP_Q1 0x10
#define CTX_FP_Q2 0x20
#define CTX_FP_Q3 0x30
#define CTX_FP_Q4 0x40
#define CTX_FP_Q5 0x50
#define CTX_FP_Q6 0x60
#define CTX_FP_Q7 0x70
#define CTX_FP_Q8 0x80
#define CTX_FP_Q9 0x90
#define CTX_FP_Q10 0xa0
#define CTX_FP_Q11 0xb0
#define CTX_FP_Q12 0xc0
#define CTX_FP_Q13 0xd0
#define CTX_FP_Q14 0xe0
#define CTX_FP_Q15 0xf0
#define CTX_FP_Q16 0x100
#define CTX_FP_Q17 0x110
#define CTX_FP_Q18 0x120
#define CTX_FP_Q19 0x130
#define CTX_FP_Q20 0x140
#define CTX_FP_Q21 0x150
#define CTX_FP_Q22 0x160
#define CTX_FP_Q23 0x170
#define CTX_FP_Q24 0x180
#define CTX_FP_Q25 0x190
#define CTX_FP_Q26 0x1a0
#define CTX_FP_Q27 0x1b0
#define CTX_FP_Q28 0x1c0
#define CTX_FP_Q29 0x1d0
#define CTX_FP_Q30 0x1e0
#define CTX_FP_Q31 0x1f0
#define CTX_FP_FPSR 0x200
#define CTX_FP_FPCR 0x208
#define CTX_FPREGS_END 0x210
#ifndef __ASSEMBLY__
#include <cassert.h>
#include <stdint.h>
/*
* Common constants to help define the 'cpu_context' structure and its
* members below.
*/
#define DWORD_SHIFT 3
#define DEFINE_REG_STRUCT(name, num_regs) \
typedef struct name { \
uint64_t _regs[num_regs]; \
} __aligned(16) name##_t
/* Constants to determine the size of individual context structures */
#define CTX_GPREG_ALL (CTX_GPREGS_END >> DWORD_SHIFT)
#define CTX_SYSREG_ALL (CTX_SYSREGS_END >> DWORD_SHIFT)
#define CTX_FPREG_ALL (CTX_FPREGS_END >> DWORD_SHIFT)
#define CTX_EL3STATE_ALL (CTX_EL3STATE_END >> DWORD_SHIFT)
/*
* AArch64 general purpose register context structure. Only x0-x18, lr
* are saved as the compiler is expected to preserve the remaining
* callee saved registers if used by the C runtime and the assembler
* does not touch the remaining.
*/
DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL);
/*
* AArch64 EL1 system register context structure for preserving the
* architectural state during switches from one security state to
* another in EL1.
*/
DEFINE_REG_STRUCT(el1_sys_regs, CTX_SYSREG_ALL);
/*
* AArch64 floating point register context structure for preserving
* the floating point state during switches from one security state to
* another.
*/
DEFINE_REG_STRUCT(fp_regs, CTX_FPREG_ALL);
/*
* Miscellaneous registers used by EL3 firmware to maintain its state
* across exception entries and exits
*/
DEFINE_REG_STRUCT(el3_state, CTX_EL3STATE_ALL);
/*
* Macros to access members of any of the above structures using their
* offsets
*/
#define read_ctx_reg(ctx, offset) ((ctx)->_regs[offset >> DWORD_SHIFT])
#define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[offset >> DWORD_SHIFT]) \
= val)
/*
* Top-level context structure which is used by EL3 firmware to
* preserve the state of a core at EL1 in one of the two security
* states and save enough EL3 meta data to be able to return to that
* EL and security state. The context management library will be used
* to ensure that SP_EL3 always points to an instance of this
* structure at exception entry and exit. Each instance will
* correspond to either the secure or the non-secure state.
*/
typedef struct cpu_context {
gp_regs_t gpregs_ctx;
el3_state_t el3state_ctx;
el1_sys_regs_t sysregs_ctx;
fp_regs_t fpregs_ctx;
} cpu_context_t;
/* Macros to access members of the 'cpu_context_t' structure */
#define get_el3state_ctx(h) (&((cpu_context_t *) h)->el3state_ctx)
#define get_fpregs_ctx(h) (&((cpu_context_t *) h)->fpregs_ctx)
#define get_sysregs_ctx(h) (&((cpu_context_t *) h)->sysregs_ctx)
#define get_gpregs_ctx(h) (&((cpu_context_t *) h)->gpregs_ctx)
/*
* Compile time assertions related to the 'cpu_context' structure to
* ensure that the assembler and the compiler view of the offsets of
* the structure members is the same.
*/
CASSERT(CTX_GPREGS_OFFSET == __builtin_offsetof(cpu_context_t, gpregs_ctx), \
assert_core_context_gp_offset_mismatch);
CASSERT(CTX_SYSREGS_OFFSET == __builtin_offsetof(cpu_context_t, sysregs_ctx), \
assert_core_context_sys_offset_mismatch);
CASSERT(CTX_FPREGS_OFFSET == __builtin_offsetof(cpu_context_t, fpregs_ctx), \
assert_core_context_fp_offset_mismatch);
CASSERT(CTX_EL3STATE_OFFSET == __builtin_offsetof(cpu_context_t, el3state_ctx), \
assert_core_context_el3state_offset_mismatch);
/*
* Helper macro to set the general purpose registers that correspond to
* parameters in an aapcs_64 call i.e. x0-x7
*/
#define set_aapcs_args0(ctx, x0) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, x0); \
} while (0);
#define set_aapcs_args1(ctx, x0, x1) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, x1); \
set_aapcs_args0(ctx, x0); \
} while (0);
#define set_aapcs_args2(ctx, x0, x1, x2) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, x2); \
set_aapcs_args1(ctx, x0, x1); \
} while (0);
#define set_aapcs_args3(ctx, x0, x1, x2, x3) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, x3); \
set_aapcs_args2(ctx, x0, x1, x2); \
} while (0);
#define set_aapcs_args4(ctx, x0, x1, x2, x3, x4) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X4, x4); \
set_aapcs_args3(ctx, x0, x1, x2, x3); \
} while (0);
#define set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X5, x5); \
set_aapcs_args4(ctx, x0, x1, x2, x3, x4); \
} while (0);
#define set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X6, x6); \
set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5); \
} while (0);
#define set_aapcs_args7(ctx, x0, x1, x2, x3, x4, x5, x6, x7) do { \
write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X7, x7); \
set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6); \
} while (0);
/*******************************************************************************
* Function prototypes
******************************************************************************/
void el3_sysregs_context_save(el3_state_t *regs);
void el3_sysregs_context_restore(el3_state_t *regs);
void el1_sysregs_context_save(el1_sys_regs_t *regs);
void el1_sysregs_context_restore(el1_sys_regs_t *regs);
void fpregs_context_save(fp_regs_t *regs);
void fpregs_context_restore(fp_regs_t *regs);
#undef CTX_SYSREG_ALL
#undef CTX_FP_ALL
#undef CTX_GPREG_ALL
#undef CTX_EL3STATE_ALL
#endif /* __ASSEMBLY__ */
#endif /* __CONTEXT_H__ */