plat/fvp/fvp_def.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __FVP_DEF_H__
 #define __FVP_DEF_H__

 /* Firmware Image Package */
 #define FIP_IMAGE_NAME			"fip.bin"
 #define FVP_PRIMARY_CPU			0x0

 /* Memory location options for TSP */
 #define FVP_TRUSTED_SRAM_ID		0
 #define FVP_TRUSTED_DRAM_ID		1
 #define FVP_DRAM_ID			2

 /*
  * Some of the definitions in this file use the 'ull' suffix in order to avoid
  * subtle integer overflow errors due to implicit integer type promotion when
  * working with 32-bit values.
  *
  * The TSP linker script includes some of these definitions to define the BL3-2
  * memory map, but the GNU LD does not support the 'ull' suffix, causing the
  * build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
  * will add the 'ull' suffix only when the macro __LINKER__  is not defined
  * (__LINKER__ is defined in the command line to preprocess the linker script).
  * Constants in the linker script will not have the 'ull' suffix, but this is
  * not a problem since the linker evaluates all constant expressions to 64 bit
  * (assuming the target architecture is 64 bit).
  */
 #ifndef __LINKER__
   #define MAKE_ULL(x)			x##ull
 #else
   #define MAKE_ULL(x)			x
 #endif

 /*******************************************************************************
  * FVP memory map related constants
  ******************************************************************************/

 #define FVP_TRUSTED_ROM_BASE	0x00000000
 #define FVP_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */

 /* The first 4KB of Trusted SRAM are used as shared memory */
 #define FVP_SHARED_MEM_BASE	0x04000000
 #define FVP_SHARED_MEM_SIZE	0x00001000	/* 4 KB */

 /* The remaining Trusted SRAM is used to load the BL images */
 #define FVP_TRUSTED_SRAM_BASE	0x04001000
 #define FVP_TRUSTED_SRAM_SIZE	0x0003F000	/* 252 KB */

 #define FVP_TRUSTED_DRAM_BASE	0x06000000
 #define FVP_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */

 #define FLASH0_BASE		0x08000000
 #define FLASH0_SIZE		0x04000000

 #define FLASH1_BASE		0x0c000000
 #define FLASH1_SIZE		0x04000000

 #define PSRAM_BASE		0x14000000
 #define PSRAM_SIZE		0x04000000

 #define VRAM_BASE		0x18000000
 #define VRAM_SIZE		0x02000000

 /* Aggregate of all devices in the first GB */
 #define DEVICE0_BASE		0x1a000000
 #define DEVICE0_SIZE		0x12200000

 #define DEVICE1_BASE		0x2f000000
 #define DEVICE1_SIZE		0x200000

 #define NSRAM_BASE		0x2e000000
 #define NSRAM_SIZE		0x10000

 #define DRAM1_BASE		MAKE_ULL(0x80000000)
 #define DRAM1_SIZE		MAKE_ULL(0x80000000)
 #define DRAM1_END		(DRAM1_BASE + DRAM1_SIZE - 1)

 /* Define the top 16 MB of DRAM1 as secure */
 #define DRAM1_SEC_SIZE		MAKE_ULL(0x01000000)
 #define DRAM1_SEC_BASE		(DRAM1_BASE + DRAM1_SIZE - DRAM1_SEC_SIZE)
 #define DRAM1_SEC_END		(DRAM1_SEC_BASE + DRAM1_SEC_SIZE - 1)

 #define DRAM1_NS_BASE		DRAM1_BASE
 #define DRAM1_NS_SIZE		(DRAM1_SIZE - DRAM1_SEC_SIZE)
 #define DRAM1_NS_END		(DRAM1_NS_BASE + DRAM1_NS_SIZE - 1)

 #define DRAM_BASE		DRAM1_BASE
 #define DRAM_SIZE		DRAM1_SIZE

 #define DRAM2_BASE		MAKE_ULL(0x880000000)
 #define DRAM2_SIZE		MAKE_ULL(0x780000000)
 #define DRAM2_END		(DRAM2_BASE + DRAM2_SIZE - 1)

 #define PCIE_EXP_BASE		0x40000000
 #define TZRNG_BASE		0x7fe60000
 #define TZNVCTR_BASE		0x7fe70000
 #define TZROOTKEY_BASE		0x7fe80000

 /* Memory mapped Generic timer interfaces  */
 #define SYS_CNTCTL_BASE		0x2a430000
 #define SYS_CNTREAD_BASE	0x2a800000
 #define SYS_TIMCTL_BASE		0x2a810000

 /* V2M motherboard system registers & offsets */
 #define VE_SYSREGS_BASE		0x1c010000
 #define V2M_SYS_ID		0x0
 #define V2M_SYS_SWITCH		0x4
 #define V2M_SYS_LED		0x8
 #define V2M_SYS_CFGDATA		0xa0
 #define V2M_SYS_CFGCTRL		0xa4
 #define V2M_SYS_CFGSTATUS	0xa8

 #define CFGCTRL_START		(1 << 31)
 #define CFGCTRL_RW		(1 << 30)
 #define CFGCTRL_FUNC_SHIFT	20
 #define CFGCTRL_FUNC(fn)	(fn << CFGCTRL_FUNC_SHIFT)
 #define FUNC_CLK_GEN		0x01
 #define FUNC_TEMP		0x04
 #define FUNC_DB_RESET		0x05
 #define FUNC_SCC_CFG		0x06
 #define FUNC_SHUTDOWN		0x08
 #define FUNC_REBOOT		0x09

 /*
  * The number of regions like RO(code), coherent and data required by
  * different BL stages which need to be mapped in the MMU.
  */
 #if USE_COHERENT_MEM
 #define FVP_BL_REGIONS		3
 #else
 #define FVP_BL_REGIONS		2
 #endif

 /*
  * The FVP_MAX_MMAP_REGIONS depend on the number of entries in fvp_mmap[]
  * defined for each BL stage in fvp_common.c.
  */
 #if IMAGE_BL1
 #define FVP_MMAP_ENTRIES		5
 #endif
 #if IMAGE_BL2
 #define FVP_MMAP_ENTRIES		7
 #endif
 #if IMAGE_BL31
 #define FVP_MMAP_ENTRIES		4
 #endif
 #if IMAGE_BL32
 #define FVP_MMAP_ENTRIES		3
 #endif

 /* Load address of BL33 in the FVP port */
 #define NS_IMAGE_OFFSET		(DRAM1_BASE + 0x8000000) /* DRAM + 128MB */

 /* Special value used to verify platform parameters from BL2 to BL3-1 */
 #define FVP_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL

 /*
  * V2M sysled bit definitions. The values written to this
  * register are defined in arch.h & runtime_svc.h. Only
  * used by the primary cpu to diagnose any cold boot issues.
  *
  * SYS_LED[0]   - Security state (S=0/NS=1)
  * SYS_LED[2:1] - Exception Level (EL3-EL0)
  * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
  *
  */
 #define SYS_LED_SS_SHIFT		0x0
 #define SYS_LED_EL_SHIFT		0x1
 #define SYS_LED_EC_SHIFT		0x3

 #define SYS_LED_SS_MASK		0x1
 #define SYS_LED_EL_MASK		0x3
 #define SYS_LED_EC_MASK		0x1f

 /* V2M sysid register bits */
 #define SYS_ID_REV_SHIFT	28
 #define SYS_ID_HBI_SHIFT	16
 #define SYS_ID_BLD_SHIFT	12
 #define SYS_ID_ARCH_SHIFT	8
 #define SYS_ID_FPGA_SHIFT	0

 #define SYS_ID_REV_MASK	0xf
 #define SYS_ID_HBI_MASK	0xfff
 #define SYS_ID_BLD_MASK	0xf
 #define SYS_ID_ARCH_MASK	0xf
 #define SYS_ID_FPGA_MASK	0xff

 #define SYS_ID_BLD_LENGTH	4

 #define HBI_FVP_BASE		0x020
 #define REV_FVP_BASE_V0		0x0

 #define HBI_FOUNDATION		0x010
 #define REV_FOUNDATION_V2_0	0x0
 #define REV_FOUNDATION_V2_1	0x1

 #define BLD_GIC_VE_MMAP	0x0
 #define BLD_GIC_A53A57_MMAP	0x1

 #define ARCH_MODEL		0x1

 /* FVP Power controller base address*/
 #define PWRC_BASE		0x1c100000


 /*******************************************************************************
  * CCI-400 related constants
  ******************************************************************************/
 #define CCI400_BASE			0x2c090000
 #define CCI400_CLUSTER0_SL_IFACE_IX	3
 #define CCI400_CLUSTER1_SL_IFACE_IX	4

 /*******************************************************************************
  * GIC-400 & interrupt handling related constants
  ******************************************************************************/
 /* VE compatible GIC memory map */
 #define VE_GICD_BASE			0x2c001000
 #define VE_GICC_BASE			0x2c002000
 #define VE_GICH_BASE			0x2c004000
 #define VE_GICV_BASE			0x2c006000

 /* Base FVP compatible GIC memory map */
 #define BASE_GICD_BASE			0x2f000000
 #define BASE_GICR_BASE			0x2f100000
 #define BASE_GICC_BASE			0x2c000000
 #define BASE_GICH_BASE			0x2c010000
 #define BASE_GICV_BASE			0x2c02f000

 #define IRQ_TZ_WDOG			56
 #define IRQ_SEC_PHY_TIMER		29
 #define IRQ_SEC_SGI_0			8
 #define IRQ_SEC_SGI_1			9
 #define IRQ_SEC_SGI_2			10
 #define IRQ_SEC_SGI_3			11
 #define IRQ_SEC_SGI_4			12
 #define IRQ_SEC_SGI_5			13
 #define IRQ_SEC_SGI_6			14
 #define IRQ_SEC_SGI_7			15

 /*******************************************************************************
  * PL011 related constants
  ******************************************************************************/
 #define PL011_UART0_BASE		0x1c090000
 #define PL011_UART1_BASE		0x1c0a0000
 #define PL011_UART2_BASE		0x1c0b0000
 #define PL011_UART3_BASE		0x1c0c0000

 #define PL011_BAUDRATE  115200

 #define PL011_UART0_CLK_IN_HZ 24000000
 #define PL011_UART1_CLK_IN_HZ 24000000
 #define PL011_UART2_CLK_IN_HZ 24000000
 #define PL011_UART3_CLK_IN_HZ 24000000

 /*******************************************************************************
  * TrustZone address space controller related constants
  ******************************************************************************/
 #define TZC400_BASE			0x2a4a0000

 /*
  * The NSAIDs for this platform as used to program the TZC400.
  */

 /* NSAIDs used by devices in TZC filter 0 on FVP */
 #define FVP_NSAID_DEFAULT		0
 #define FVP_NSAID_PCI			1
 #define FVP_NSAID_VIRTIO		8  /* from FVP v5.6 onwards */
 #define FVP_NSAID_AP			9  /* Application Processors */
 #define FVP_NSAID_VIRTIO_OLD		15 /* until FVP v5.5 */

 /* NSAIDs used by devices in TZC filter 2 on FVP */
 #define FVP_NSAID_HDLCD0		2
 #define FVP_NSAID_CLCD			7

 /*******************************************************************************
  *  Shared Data
  ******************************************************************************/

 /* Entrypoint mailboxes */
 #define MBOX_BASE		FVP_SHARED_MEM_BASE
 #define MBOX_SIZE		0x200

 /* Base address where parameters to BL31 are stored */
 #define PARAMS_BASE		(MBOX_BASE + MBOX_SIZE)

 #endif /* __FVP_DEF_H__ */
	/*
	* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __FVP_DEF_H__
	#define __FVP_DEF_H__

	/* Firmware Image Package */
	#define FIP_IMAGE_NAME "fip.bin"
	#define FVP_PRIMARY_CPU 0x0

	/* Memory location options for TSP */
	#define FVP_TRUSTED_SRAM_ID 0
	#define FVP_TRUSTED_DRAM_ID 1
	#define FVP_DRAM_ID 2

	/*
	* Some of the definitions in this file use the 'ull' suffix in order to avoid
	* subtle integer overflow errors due to implicit integer type promotion when
	* working with 32-bit values.
	*
	* The TSP linker script includes some of these definitions to define the BL3-2
	* memory map, but the GNU LD does not support the 'ull' suffix, causing the
	* build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
	* will add the 'ull' suffix only when the macro __LINKER__ is not defined
	* (__LINKER__ is defined in the command line to preprocess the linker script).
	* Constants in the linker script will not have the 'ull' suffix, but this is
	* not a problem since the linker evaluates all constant expressions to 64 bit
	* (assuming the target architecture is 64 bit).
	*/
	#ifndef __LINKER__
	#define MAKE_ULL(x) x##ull
	#else
	#define MAKE_ULL(x) x
	#endif

	/*******************************************************************************
	* FVP memory map related constants
	******************************************************************************/

	#define FVP_TRUSTED_ROM_BASE 0x00000000
	#define FVP_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */

	/* The first 4KB of Trusted SRAM are used as shared memory */
	#define FVP_SHARED_MEM_BASE 0x04000000
	#define FVP_SHARED_MEM_SIZE 0x00001000 /* 4 KB */

	/* The remaining Trusted SRAM is used to load the BL images */
	#define FVP_TRUSTED_SRAM_BASE 0x04001000
	#define FVP_TRUSTED_SRAM_SIZE 0x0003F000 /* 252 KB */

	#define FVP_TRUSTED_DRAM_BASE 0x06000000
	#define FVP_TRUSTED_DRAM_SIZE 0x02000000 /* 32 MB */

	#define FLASH0_BASE 0x08000000
	#define FLASH0_SIZE 0x04000000

	#define FLASH1_BASE 0x0c000000
	#define FLASH1_SIZE 0x04000000

	#define PSRAM_BASE 0x14000000
	#define PSRAM_SIZE 0x04000000

	#define VRAM_BASE 0x18000000
	#define VRAM_SIZE 0x02000000

	/* Aggregate of all devices in the first GB */
	#define DEVICE0_BASE 0x1a000000
	#define DEVICE0_SIZE 0x12200000

	#define DEVICE1_BASE 0x2f000000
	#define DEVICE1_SIZE 0x200000

	#define NSRAM_BASE 0x2e000000
	#define NSRAM_SIZE 0x10000

	#define DRAM1_BASE MAKE_ULL(0x80000000)
	#define DRAM1_SIZE MAKE_ULL(0x80000000)
	#define DRAM1_END (DRAM1_BASE + DRAM1_SIZE - 1)

	/* Define the top 16 MB of DRAM1 as secure */
	#define DRAM1_SEC_SIZE MAKE_ULL(0x01000000)
	#define DRAM1_SEC_BASE (DRAM1_BASE + DRAM1_SIZE - DRAM1_SEC_SIZE)
	#define DRAM1_SEC_END (DRAM1_SEC_BASE + DRAM1_SEC_SIZE - 1)

	#define DRAM1_NS_BASE DRAM1_BASE
	#define DRAM1_NS_SIZE (DRAM1_SIZE - DRAM1_SEC_SIZE)
	#define DRAM1_NS_END (DRAM1_NS_BASE + DRAM1_NS_SIZE - 1)

	#define DRAM_BASE DRAM1_BASE
	#define DRAM_SIZE DRAM1_SIZE

	#define DRAM2_BASE MAKE_ULL(0x880000000)
	#define DRAM2_SIZE MAKE_ULL(0x780000000)
	#define DRAM2_END (DRAM2_BASE + DRAM2_SIZE - 1)

	#define PCIE_EXP_BASE 0x40000000
	#define TZRNG_BASE 0x7fe60000
	#define TZNVCTR_BASE 0x7fe70000
	#define TZROOTKEY_BASE 0x7fe80000

	/* Memory mapped Generic timer interfaces */
	#define SYS_CNTCTL_BASE 0x2a430000
	#define SYS_CNTREAD_BASE 0x2a800000
	#define SYS_TIMCTL_BASE 0x2a810000

	/* V2M motherboard system registers & offsets */
	#define VE_SYSREGS_BASE 0x1c010000
	#define V2M_SYS_ID 0x0
	#define V2M_SYS_SWITCH 0x4
	#define V2M_SYS_LED 0x8
	#define V2M_SYS_CFGDATA 0xa0
	#define V2M_SYS_CFGCTRL 0xa4
	#define V2M_SYS_CFGSTATUS 0xa8

	#define CFGCTRL_START (1 << 31)
	#define CFGCTRL_RW (1 << 30)
	#define CFGCTRL_FUNC_SHIFT 20
	#define CFGCTRL_FUNC(fn) (fn << CFGCTRL_FUNC_SHIFT)
	#define FUNC_CLK_GEN 0x01
	#define FUNC_TEMP 0x04
	#define FUNC_DB_RESET 0x05
	#define FUNC_SCC_CFG 0x06
	#define FUNC_SHUTDOWN 0x08
	#define FUNC_REBOOT 0x09

	/*
	* The number of regions like RO(code), coherent and data required by
	* different BL stages which need to be mapped in the MMU.
	*/
	#if USE_COHERENT_MEM
	#define FVP_BL_REGIONS 3
	#else
	#define FVP_BL_REGIONS 2
	#endif

	/*
	* The FVP_MAX_MMAP_REGIONS depend on the number of entries in fvp_mmap[]
	* defined for each BL stage in fvp_common.c.
	*/
	#if IMAGE_BL1
	#define FVP_MMAP_ENTRIES 5
	#endif
	#if IMAGE_BL2
	#define FVP_MMAP_ENTRIES 7
	#endif
	#if IMAGE_BL31
	#define FVP_MMAP_ENTRIES 4
	#endif
	#if IMAGE_BL32
	#define FVP_MMAP_ENTRIES 3
	#endif

	/* Load address of BL33 in the FVP port */
	#define NS_IMAGE_OFFSET (DRAM1_BASE + 0x8000000) /* DRAM + 128MB */

	/* Special value used to verify platform parameters from BL2 to BL3-1 */
	#define FVP_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL

	/*
	* V2M sysled bit definitions. The values written to this
	* register are defined in arch.h & runtime_svc.h. Only
	* used by the primary cpu to diagnose any cold boot issues.
	*
	* SYS_LED[0] - Security state (S=0/NS=1)
	* SYS_LED[2:1] - Exception Level (EL3-EL0)
	* SYS_LED[7:3] - Exception Class (Sync/Async & origin)
	*
	*/
	#define SYS_LED_SS_SHIFT 0x0
	#define SYS_LED_EL_SHIFT 0x1
	#define SYS_LED_EC_SHIFT 0x3

	#define SYS_LED_SS_MASK 0x1
	#define SYS_LED_EL_MASK 0x3
	#define SYS_LED_EC_MASK 0x1f

	/* V2M sysid register bits */
	#define SYS_ID_REV_SHIFT 28
	#define SYS_ID_HBI_SHIFT 16
	#define SYS_ID_BLD_SHIFT 12
	#define SYS_ID_ARCH_SHIFT 8
	#define SYS_ID_FPGA_SHIFT 0

	#define SYS_ID_REV_MASK 0xf
	#define SYS_ID_HBI_MASK 0xfff
	#define SYS_ID_BLD_MASK 0xf
	#define SYS_ID_ARCH_MASK 0xf
	#define SYS_ID_FPGA_MASK 0xff

	#define SYS_ID_BLD_LENGTH 4

	#define HBI_FVP_BASE 0x020
	#define REV_FVP_BASE_V0 0x0

	#define HBI_FOUNDATION 0x010
	#define REV_FOUNDATION_V2_0 0x0
	#define REV_FOUNDATION_V2_1 0x1

	#define BLD_GIC_VE_MMAP 0x0
	#define BLD_GIC_A53A57_MMAP 0x1

	#define ARCH_MODEL 0x1

	/* FVP Power controller base address*/
	#define PWRC_BASE 0x1c100000


	/*******************************************************************************
	* CCI-400 related constants
	******************************************************************************/
	#define CCI400_BASE 0x2c090000
	#define CCI400_CLUSTER0_SL_IFACE_IX 3
	#define CCI400_CLUSTER1_SL_IFACE_IX 4

	/*******************************************************************************
	* GIC-400 & interrupt handling related constants
	******************************************************************************/
	/* VE compatible GIC memory map */
	#define VE_GICD_BASE 0x2c001000
	#define VE_GICC_BASE 0x2c002000
	#define VE_GICH_BASE 0x2c004000
	#define VE_GICV_BASE 0x2c006000

	/* Base FVP compatible GIC memory map */
	#define BASE_GICD_BASE 0x2f000000
	#define BASE_GICR_BASE 0x2f100000
	#define BASE_GICC_BASE 0x2c000000
	#define BASE_GICH_BASE 0x2c010000
	#define BASE_GICV_BASE 0x2c02f000

	#define IRQ_TZ_WDOG 56
	#define IRQ_SEC_PHY_TIMER 29
	#define IRQ_SEC_SGI_0 8
	#define IRQ_SEC_SGI_1 9
	#define IRQ_SEC_SGI_2 10
	#define IRQ_SEC_SGI_3 11
	#define IRQ_SEC_SGI_4 12
	#define IRQ_SEC_SGI_5 13
	#define IRQ_SEC_SGI_6 14
	#define IRQ_SEC_SGI_7 15

	/*******************************************************************************
	* PL011 related constants
	******************************************************************************/
	#define PL011_UART0_BASE 0x1c090000
	#define PL011_UART1_BASE 0x1c0a0000
	#define PL011_UART2_BASE 0x1c0b0000
	#define PL011_UART3_BASE 0x1c0c0000

	#define PL011_BAUDRATE 115200

	#define PL011_UART0_CLK_IN_HZ 24000000
	#define PL011_UART1_CLK_IN_HZ 24000000
	#define PL011_UART2_CLK_IN_HZ 24000000
	#define PL011_UART3_CLK_IN_HZ 24000000

	/*******************************************************************************
	* TrustZone address space controller related constants
	******************************************************************************/
	#define TZC400_BASE 0x2a4a0000

	/*
	* The NSAIDs for this platform as used to program the TZC400.
	*/

	/* NSAIDs used by devices in TZC filter 0 on FVP */
	#define FVP_NSAID_DEFAULT 0
	#define FVP_NSAID_PCI 1
	#define FVP_NSAID_VIRTIO 8 /* from FVP v5.6 onwards */
	#define FVP_NSAID_AP 9 /* Application Processors */
	#define FVP_NSAID_VIRTIO_OLD 15 /* until FVP v5.5 */

	/* NSAIDs used by devices in TZC filter 2 on FVP */
	#define FVP_NSAID_HDLCD0 2
	#define FVP_NSAID_CLCD 7

	/*******************************************************************************
	* Shared Data
	******************************************************************************/

	/* Entrypoint mailboxes */
	#define MBOX_BASE FVP_SHARED_MEM_BASE
	#define MBOX_SIZE 0x200

	/* Base address where parameters to BL31 are stored */
	#define PARAMS_BASE (MBOX_BASE + MBOX_SIZE)

	#endif /* __FVP_DEF_H__ */