blob: f17911fecfd8298737659693e813de2758fbb2bd [file] [log] [blame]
#
# Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include lib/libfdt/libfdt.mk
include lib/xlat_tables_v2/xlat_tables.mk
include drivers/arm/gic/v2/gicv2.mk
PLAT_INCLUDES := -Iplat/rpi/common/include \
-Iplat/rpi/rpi4/include
PLAT_BL_COMMON_SOURCES := drivers/ti/uart/aarch64/16550_console.S \
drivers/arm/pl011/aarch64/pl011_console.S \
plat/rpi/common/rpi3_common.c \
plat/rpi/common/rpi3_console_dual.c \
${XLAT_TABLES_LIB_SRCS}
BL31_SOURCES += lib/cpus/aarch64/cortex_a72.S \
plat/rpi/common/aarch64/plat_helpers.S \
plat/rpi/common/aarch64/armstub8_header.S \
drivers/delay_timer/delay_timer.c \
drivers/gpio/gpio.c \
drivers/rpi3/gpio/rpi3_gpio.c \
plat/common/plat_gicv2.c \
plat/rpi/common/rpi4_bl31_setup.c \
plat/rpi/rpi4/rpi4_setup.c \
plat/rpi/common/rpi3_pm.c \
plat/common/plat_psci_common.c \
plat/rpi/common/rpi3_topology.c \
common/fdt_fixup.c \
${LIBFDT_SRCS} \
${GICV2_SOURCES}
# For now we only support BL31, using the kernel loaded by the GPU firmware.
RESET_TO_BL31 := 1
# All CPUs enter armstub8.bin.
COLD_BOOT_SINGLE_CPU := 0
# Tune compiler for Cortex-A72
ifeq ($($(ARCH)-cc-id),arm-clang)
TF_CFLAGS_aarch64 += -mcpu=cortex-a72
else ifneq ($(filter %-clang,$($(ARCH)-cc-id)),)
TF_CFLAGS_aarch64 += -mcpu=cortex-a72
else
TF_CFLAGS_aarch64 += -mtune=cortex-a72
endif
# Add support for platform supplied linker script for BL31 build
$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
# Enable all errata workarounds for Cortex-A72
ERRATA_A72_859971 := 1
WORKAROUND_CVE_2017_5715 := 1
# Add new default target when compiling this platform
all: bl31
# Build config flags
# ------------------
# Disable stack protector by default
ENABLE_STACK_PROTECTOR := 0
# Have different sections for code and rodata
SEPARATE_CODE_AND_RODATA := 1
# Use Coherent memory
USE_COHERENT_MEM := 1
# Platform build flags
# --------------------
# There is not much else than a Linux kernel to load at the moment.
RPI3_DIRECT_LINUX_BOOT := 1
# BL33 images are in AArch64 by default
RPI3_BL33_IN_AARCH32 := 0
# UART to use at runtime. -1 means the runtime UART is disabled.
# Any other value means the default UART will be used.
RPI3_RUNTIME_UART := 0
# Use normal memory mapping for ROM, FIP, SRAM and DRAM
RPI3_USE_UEFI_MAP := 0
# SMCCC PCI support (should be enabled for ACPI builds)
SMC_PCI_SUPPORT := 0
# Process platform flags
# ----------------------
$(eval $(call add_define,RPI3_BL33_IN_AARCH32))
$(eval $(call add_define,RPI3_DIRECT_LINUX_BOOT))
ifdef RPI3_PRELOADED_DTB_BASE
$(eval $(call add_define,RPI3_PRELOADED_DTB_BASE))
endif
$(eval $(call add_define,RPI3_RUNTIME_UART))
$(eval $(call add_define,RPI3_USE_UEFI_MAP))
$(eval $(call add_define,SMC_PCI_SUPPORT))
ifeq (${ARCH},aarch32)
$(error Error: AArch32 not supported on rpi4)
endif
ifneq ($(ENABLE_STACK_PROTECTOR), 0)
PLAT_BL_COMMON_SOURCES += drivers/rpi3/rng/rpi3_rng.c \
plat/rpi/common/rpi3_stack_protector.c
endif
ifeq ($(SMC_PCI_SUPPORT), 1)
BL31_SOURCES += plat/rpi/rpi4/rpi4_pci_svc.c
endif