plat/nvidia/tegra/common/tegra_bl31_setup.c - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
  * Copyright (c) 2020-2023, NVIDIA Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #include <assert.h>
 #include <errno.h>
 #include <inttypes.h>
 #include <stddef.h>
 #include <string.h>

 #include <platform_def.h>

 #include <arch.h>
 #include <arch_helpers.h>
 #include <bl31/bl31.h>
 #include <common/bl_common.h>
 #include <common/debug.h>
 #include <cortex_a57.h>
 #include <denver.h>
 #include <drivers/console.h>
 #include <lib/mmio.h>
 #include <lib/utils.h>
 #include <lib/utils_def.h>
 #include <plat/common/platform.h>

 #include <memctrl.h>
 #include <profiler.h>
 #include <smmu.h>
 #include <tegra_def.h>
 #include <tegra_platform.h>
 #include <tegra_private.h>

 /* length of Trusty's input parameters (in bytes) */
 #define TRUSTY_PARAMS_LEN_BYTES	(4096*2)

 /*******************************************************************************
  * Declarations of linker defined symbols which will help us find the layout
  * of trusted SRAM
  ******************************************************************************/
 IMPORT_SYM(uint64_t, __RW_START__,	BL31_RW_START);

 extern uint64_t tegra_bl31_phys_base;

 static entry_point_info_t bl33_image_ep_info, bl32_image_ep_info;
 static plat_params_from_bl2_t plat_bl31_params_from_bl2 = {
 	.tzdram_size = TZDRAM_SIZE
 };
 #ifdef SPD_trusty
 static aapcs64_params_t bl32_args;
 #endif

 /*******************************************************************************
  * This variable holds the non-secure image entry address
  ******************************************************************************/
 extern uint64_t ns_image_entrypoint;

 /*******************************************************************************
  * Return a pointer to the 'entry_point_info' structure of the next image for
  * security state specified. BL33 corresponds to the non-secure image type
  * while BL32 corresponds to the secure image type.
  ******************************************************************************/
 entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
 {
 	entry_point_info_t *ep =  NULL;

 	/* return BL32 entry point info if it is valid */
 	if (type == NON_SECURE) {
 		ep = &bl33_image_ep_info;
 	} else if ((type == SECURE) && (bl32_image_ep_info.pc != 0U)) {
 		ep = &bl32_image_ep_info;
 	}

 	return ep;
 }

 /*******************************************************************************
  * Return a pointer to the 'plat_params_from_bl2_t' structure. The BL2 image
  * passes this platform specific information.
  ******************************************************************************/
 plat_params_from_bl2_t *bl31_get_plat_params(void)
 {
 	return &plat_bl31_params_from_bl2;
 }

 /*******************************************************************************
  * Perform any BL31 specific platform actions. Populate the BL33 and BL32 image
  * info.
  ******************************************************************************/
 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 				u_register_t arg2, u_register_t arg3)
 {
 	struct tegra_bl31_params *arg_from_bl2 = plat_get_bl31_params();
 	plat_params_from_bl2_t *plat_params = plat_get_bl31_plat_params();
 	int32_t ret;

 	/*
 	 * Tegra platforms will receive boot parameters through custom
 	 * mechanisms. So, we ignore the input parameters.
 	 */
 	(void)arg0;
 	(void)arg1;

 	/*
 	 * Copy BL3-3, BL3-2 entry point information.
 	 * They are stored in Secure RAM, in BL2's address space.
 	 */
 	assert(arg_from_bl2 != NULL);
 	assert(arg_from_bl2->bl33_ep_info != NULL);
 	bl33_image_ep_info = *arg_from_bl2->bl33_ep_info;

 	if (arg_from_bl2->bl32_ep_info != NULL) {
 		bl32_image_ep_info = *arg_from_bl2->bl32_ep_info;
 #ifdef SPD_trusty
 		/* save BL32 boot parameters */
 		memcpy(&bl32_args, &arg_from_bl2->bl32_ep_info->args, sizeof(bl32_args));
 #endif
 	}

 	/*
 	 * Parse platform specific parameters
 	 */
 	assert(plat_params != NULL);
 	plat_bl31_params_from_bl2.tzdram_base = plat_params->tzdram_base;
 	plat_bl31_params_from_bl2.tzdram_size = plat_params->tzdram_size;
 	plat_bl31_params_from_bl2.uart_id = plat_params->uart_id;
 	plat_bl31_params_from_bl2.l2_ecc_parity_prot_dis = plat_params->l2_ecc_parity_prot_dis;
 	plat_bl31_params_from_bl2.sc7entry_fw_size = plat_params->sc7entry_fw_size;
 	plat_bl31_params_from_bl2.sc7entry_fw_base = plat_params->sc7entry_fw_base;

 	/*
 	 * It is very important that we run either from TZDRAM or TZSRAM base.
 	 * Add an explicit check here.
 	 */
 	if ((plat_bl31_params_from_bl2.tzdram_base != (uint64_t)BL31_BASE) &&
 	    (TEGRA_TZRAM_BASE != BL31_BASE)) {
 		panic();
 	}

 	/*
 	 * Enable console for the platform
 	 */
 	plat_enable_console(plat_params->uart_id);

 	/*
 	 * The previous bootloader passes the base address of the shared memory
 	 * location to store the boot profiler logs. Sanity check the
 	 * address and initialise the profiler library, if it looks ok.
 	 */
 	ret = bl31_check_ns_address(plat_params->boot_profiler_shmem_base,
 			PROFILER_SIZE_BYTES);
 	if (ret == (int32_t)0) {

 		/* store the membase for the profiler lib */
 		plat_bl31_params_from_bl2.boot_profiler_shmem_base =
 			plat_params->boot_profiler_shmem_base;

 		/* initialise the profiler library */
 		boot_profiler_init(plat_params->boot_profiler_shmem_base,
 				   TEGRA_TMRUS_BASE);
 	}

 	/*
 	 * Add timestamp for platform early setup entry.
 	 */
 	boot_profiler_add_record("[TF] early setup entry");

 	/*
 	 * Initialize delay timer
 	 */
 	tegra_delay_timer_init();

 	/* Early platform setup for Tegra SoCs */
 	plat_early_platform_setup();

 	/*
 	 * Add timestamp for platform early setup exit.
 	 */
 	boot_profiler_add_record("[TF] early setup exit");

 	INFO("BL3-1: Boot CPU: %s Processor [%lx]\n",
 	     (((read_midr() >> MIDR_IMPL_SHIFT) & MIDR_IMPL_MASK)
 	      == DENVER_IMPL) ? "Denver" : "ARM", read_mpidr());
 }

 #ifdef SPD_trusty
 void plat_trusty_set_boot_args(aapcs64_params_t *args)
 {
 	/*
 	* arg0 = TZDRAM aperture available for BL32
 	* arg1 = BL32 boot params
 	* arg2 = EKS Blob Length
 	* arg3 = Boot Profiler Carveout Base
 	*/
 	args->arg0 = bl32_args.arg0;
 	args->arg1 = bl32_args.arg2;

 	/* update EKS size */
 	args->arg2 = bl32_args.arg4;

 	/* Profiler Carveout Base */
 	args->arg3 = bl32_args.arg5;
 }
 #endif

 /*******************************************************************************
  * Initialize the gic, configure the SCR.
  ******************************************************************************/
 void bl31_platform_setup(void)
 {
 	/*
 	 * Add timestamp for platform setup entry.
 	 */
 	boot_profiler_add_record("[TF] plat setup entry");

 	/* Initialize the gic cpu and distributor interfaces */
 	plat_gic_setup();

 	/*
 	 * Setup secondary CPU POR infrastructure.
 	 */
 	plat_secondary_setup();

 	/*
 	 * Initial Memory Controller configuration.
 	 */
 	tegra_memctrl_setup();

 	/*
 	 * Late setup handler to allow platforms to performs additional
 	 * functionality.
 	 * This handler gets called with MMU enabled.
 	 */
 	plat_late_platform_setup();

 	/*
 	 * Add timestamp for platform setup exit.
 	 */
 	boot_profiler_add_record("[TF] plat setup exit");

 	INFO("BL3-1: Tegra platform setup complete\n");
 }

 /*******************************************************************************
  * Perform any BL3-1 platform runtime setup prior to BL3-1 cold boot exit
  ******************************************************************************/
 void bl31_plat_runtime_setup(void)
 {
 	/*
 	 * Platform specific runtime setup
 	 */
 	plat_runtime_setup();

 	/*
 	 * Add final timestamp before exiting BL31.
 	 */
 	boot_profiler_add_record("[TF] bl31 exit");
 	boot_profiler_deinit();
 }

 /*******************************************************************************
  * Perform the very early platform specific architectural setup here. At the
  * moment this only initializes the mmu in a quick and dirty way.
  ******************************************************************************/
 void bl31_plat_arch_setup(void)
 {
 	uint64_t rw_start = BL31_RW_START;
 	uint64_t rw_size = BL_END - BL31_RW_START;
 	uint64_t rodata_start = BL_RO_DATA_BASE;
 	uint64_t rodata_size = BL_RO_DATA_END - BL_RO_DATA_BASE;
 	uint64_t code_base = BL_CODE_BASE;
 	uint64_t code_size = BL_CODE_END - BL_CODE_BASE;
 	const mmap_region_t *plat_mmio_map = NULL;
 	const plat_params_from_bl2_t *params_from_bl2 = bl31_get_plat_params();

 	/*
 	 * Add timestamp for arch setup entry.
 	 */
 	boot_profiler_add_record("[TF] arch setup entry");

 	/* add MMIO space */
 	plat_mmio_map = plat_get_mmio_map();
 	if (plat_mmio_map != NULL) {
 		mmap_add(plat_mmio_map);
 	} else {
 		WARN("MMIO map not available\n");
 	}

 	/* add memory regions */
 	mmap_add_region(rw_start, rw_start,
 			rw_size,
 			MT_MEMORY | MT_RW | MT_SECURE);
 	mmap_add_region(rodata_start, rodata_start,
 			rodata_size,
 			MT_RO_DATA | MT_SECURE);
 	mmap_add_region(code_base, code_base,
 			code_size,
 			MT_CODE | MT_SECURE);

 	/* map TZDRAM used by BL31 as coherent memory */
 	if (TEGRA_TZRAM_BASE == tegra_bl31_phys_base) {
 		mmap_add_region(params_from_bl2->tzdram_base,
 				params_from_bl2->tzdram_base,
 				BL31_SIZE,
 				MT_DEVICE | MT_RW | MT_SECURE);
 	}

 	/* set up translation tables */
 	init_xlat_tables();

 	/* enable the MMU */
 	enable_mmu_el3(0);

 	/*
 	 * Add timestamp for arch setup exit.
 	 */
 	boot_profiler_add_record("[TF] arch setup exit");

 	INFO("BL3-1: Tegra: MMU enabled\n");
 }

 /*******************************************************************************
  * Check if the given NS DRAM range is valid
  ******************************************************************************/
 int32_t bl31_check_ns_address(uint64_t base, uint64_t size_in_bytes)
 {
 	uint64_t end = base + size_in_bytes - U(1);

 	/*
 	 * Sanity check the input values
 	 */
 	if ((base == 0U) || (size_in_bytes == 0U)) {
 		ERROR("NS address 0x%" PRIx64 " (%" PRId64 " bytes) is invalid\n",
 			base, size_in_bytes);
 		return -EINVAL;
 	}

 	/*
 	 * Check if the NS DRAM address is valid
 	 */
 	if ((base < TEGRA_DRAM_BASE) || (base >= TEGRA_DRAM_END) ||
 	    (end > TEGRA_DRAM_END)) {

 		ERROR("NS address 0x%" PRIx64 " is out-of-bounds!\n", base);
 		return -EFAULT;
 	}

 	/*
 	 * TZDRAM aperture contains the BL31 and BL32 images, so we need
 	 * to check if the NS DRAM range overlaps the TZDRAM aperture.
 	 */
 	if ((base < (uint64_t)TZDRAM_END) && (end > tegra_bl31_phys_base)) {
 		ERROR("NS address 0x%" PRIx64 " overlaps TZDRAM!\n", base);
 		return -ENOTSUP;
 	}

 	/* valid NS address */
 	return 0;
 }
	/*
	* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
	* Copyright (c) 2020-2023, NVIDIA Corporation. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#include <assert.h>
	#include <errno.h>
	#include <inttypes.h>
	#include <stddef.h>
	#include <string.h>

	#include <platform_def.h>

	#include <arch.h>
	#include <arch_helpers.h>
	#include <bl31/bl31.h>
	#include <common/bl_common.h>
	#include <common/debug.h>
	#include <cortex_a57.h>
	#include <denver.h>
	#include <drivers/console.h>
	#include <lib/mmio.h>
	#include <lib/utils.h>
	#include <lib/utils_def.h>
	#include <plat/common/platform.h>

	#include <memctrl.h>
	#include <profiler.h>
	#include <smmu.h>
	#include <tegra_def.h>
	#include <tegra_platform.h>
	#include <tegra_private.h>

	/* length of Trusty's input parameters (in bytes) */
	#define TRUSTY_PARAMS_LEN_BYTES (4096*2)

	/*******************************************************************************
	* Declarations of linker defined symbols which will help us find the layout
	* of trusted SRAM
	******************************************************************************/
	IMPORT_SYM(uint64_t, __RW_START__, BL31_RW_START);

	extern uint64_t tegra_bl31_phys_base;

	static entry_point_info_t bl33_image_ep_info, bl32_image_ep_info;
	static plat_params_from_bl2_t plat_bl31_params_from_bl2 = {
	.tzdram_size = TZDRAM_SIZE
	};
	#ifdef SPD_trusty
	static aapcs64_params_t bl32_args;
	#endif

	/*******************************************************************************
	* This variable holds the non-secure image entry address
	******************************************************************************/
	extern uint64_t ns_image_entrypoint;

	/*******************************************************************************
	* Return a pointer to the 'entry_point_info' structure of the next image for
	* security state specified. BL33 corresponds to the non-secure image type
	* while BL32 corresponds to the secure image type.
	******************************************************************************/
	entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
	{
	entry_point_info_t *ep = NULL;

	/* return BL32 entry point info if it is valid */
	if (type == NON_SECURE) {
	ep = &bl33_image_ep_info;
	} else if ((type == SECURE) && (bl32_image_ep_info.pc != 0U)) {
	ep = &bl32_image_ep_info;
	}

	return ep;
	}

	/*******************************************************************************
	* Return a pointer to the 'plat_params_from_bl2_t' structure. The BL2 image
	* passes this platform specific information.
	******************************************************************************/
	plat_params_from_bl2_t *bl31_get_plat_params(void)
	{
	return &plat_bl31_params_from_bl2;
	}

	/*******************************************************************************
	* Perform any BL31 specific platform actions. Populate the BL33 and BL32 image
	* info.
	******************************************************************************/
	void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
	u_register_t arg2, u_register_t arg3)
	{
	struct tegra_bl31_params *arg_from_bl2 = plat_get_bl31_params();
	plat_params_from_bl2_t *plat_params = plat_get_bl31_plat_params();
	int32_t ret;

	/*
	* Tegra platforms will receive boot parameters through custom
	* mechanisms. So, we ignore the input parameters.
	*/
	(void)arg0;
	(void)arg1;

	/*
	* Copy BL3-3, BL3-2 entry point information.
	* They are stored in Secure RAM, in BL2's address space.
	*/
	assert(arg_from_bl2 != NULL);
	assert(arg_from_bl2->bl33_ep_info != NULL);
	bl33_image_ep_info = *arg_from_bl2->bl33_ep_info;

	if (arg_from_bl2->bl32_ep_info != NULL) {
	bl32_image_ep_info = *arg_from_bl2->bl32_ep_info;
	#ifdef SPD_trusty
	/* save BL32 boot parameters */
	memcpy(&bl32_args, &arg_from_bl2->bl32_ep_info->args, sizeof(bl32_args));
	#endif
	}

	/*
	* Parse platform specific parameters
	*/
	assert(plat_params != NULL);
	plat_bl31_params_from_bl2.tzdram_base = plat_params->tzdram_base;
	plat_bl31_params_from_bl2.tzdram_size = plat_params->tzdram_size;
	plat_bl31_params_from_bl2.uart_id = plat_params->uart_id;
	plat_bl31_params_from_bl2.l2_ecc_parity_prot_dis = plat_params->l2_ecc_parity_prot_dis;
	plat_bl31_params_from_bl2.sc7entry_fw_size = plat_params->sc7entry_fw_size;
	plat_bl31_params_from_bl2.sc7entry_fw_base = plat_params->sc7entry_fw_base;

	/*
	* It is very important that we run either from TZDRAM or TZSRAM base.
	* Add an explicit check here.
	*/
	if ((plat_bl31_params_from_bl2.tzdram_base != (uint64_t)BL31_BASE) &&
	(TEGRA_TZRAM_BASE != BL31_BASE)) {
	panic();
	}

	/*
	* Enable console for the platform
	*/
	plat_enable_console(plat_params->uart_id);

	/*
	* The previous bootloader passes the base address of the shared memory
	* location to store the boot profiler logs. Sanity check the
	* address and initialise the profiler library, if it looks ok.
	*/
	ret = bl31_check_ns_address(plat_params->boot_profiler_shmem_base,
	PROFILER_SIZE_BYTES);
	if (ret == (int32_t)0) {

	/* store the membase for the profiler lib */
	plat_bl31_params_from_bl2.boot_profiler_shmem_base =
	plat_params->boot_profiler_shmem_base;

	/* initialise the profiler library */
	boot_profiler_init(plat_params->boot_profiler_shmem_base,
	TEGRA_TMRUS_BASE);
	}

	/*
	* Add timestamp for platform early setup entry.
	*/
	boot_profiler_add_record("[TF] early setup entry");

	/*
	* Initialize delay timer
	*/
	tegra_delay_timer_init();

	/* Early platform setup for Tegra SoCs */
	plat_early_platform_setup();

	/*
	* Add timestamp for platform early setup exit.
	*/
	boot_profiler_add_record("[TF] early setup exit");

	INFO("BL3-1: Boot CPU: %s Processor [%lx]\n",
	(((read_midr() >> MIDR_IMPL_SHIFT) & MIDR_IMPL_MASK)
	== DENVER_IMPL) ? "Denver" : "ARM", read_mpidr());
	}

	#ifdef SPD_trusty
	void plat_trusty_set_boot_args(aapcs64_params_t *args)
	{
	/*
	* arg0 = TZDRAM aperture available for BL32
	* arg1 = BL32 boot params
	* arg2 = EKS Blob Length
	* arg3 = Boot Profiler Carveout Base
	*/
	args->arg0 = bl32_args.arg0;
	args->arg1 = bl32_args.arg2;

	/* update EKS size */
	args->arg2 = bl32_args.arg4;

	/* Profiler Carveout Base */
	args->arg3 = bl32_args.arg5;
	}
	#endif

	/*******************************************************************************
	* Initialize the gic, configure the SCR.
	******************************************************************************/
	void bl31_platform_setup(void)
	{
	/*
	* Add timestamp for platform setup entry.
	*/
	boot_profiler_add_record("[TF] plat setup entry");

	/* Initialize the gic cpu and distributor interfaces */
	plat_gic_setup();

	/*
	* Setup secondary CPU POR infrastructure.
	*/
	plat_secondary_setup();

	/*
	* Initial Memory Controller configuration.
	*/
	tegra_memctrl_setup();

	/*
	* Late setup handler to allow platforms to performs additional
	* functionality.
	* This handler gets called with MMU enabled.
	*/
	plat_late_platform_setup();

	/*
	* Add timestamp for platform setup exit.
	*/
	boot_profiler_add_record("[TF] plat setup exit");

	INFO("BL3-1: Tegra platform setup complete\n");
	}

	/*******************************************************************************
	* Perform any BL3-1 platform runtime setup prior to BL3-1 cold boot exit
	******************************************************************************/
	void bl31_plat_runtime_setup(void)
	{
	/*
	* Platform specific runtime setup
	*/
	plat_runtime_setup();

	/*
	* Add final timestamp before exiting BL31.
	*/
	boot_profiler_add_record("[TF] bl31 exit");
	boot_profiler_deinit();
	}

	/*******************************************************************************
	* Perform the very early platform specific architectural setup here. At the
	* moment this only initializes the mmu in a quick and dirty way.
	******************************************************************************/
	void bl31_plat_arch_setup(void)
	{
	uint64_t rw_start = BL31_RW_START;
	uint64_t rw_size = BL_END - BL31_RW_START;
	uint64_t rodata_start = BL_RO_DATA_BASE;
	uint64_t rodata_size = BL_RO_DATA_END - BL_RO_DATA_BASE;
	uint64_t code_base = BL_CODE_BASE;
	uint64_t code_size = BL_CODE_END - BL_CODE_BASE;
	const mmap_region_t *plat_mmio_map = NULL;
	const plat_params_from_bl2_t *params_from_bl2 = bl31_get_plat_params();

	/*
	* Add timestamp for arch setup entry.
	*/
	boot_profiler_add_record("[TF] arch setup entry");

	/* add MMIO space */
	plat_mmio_map = plat_get_mmio_map();
	if (plat_mmio_map != NULL) {
	mmap_add(plat_mmio_map);
	} else {
	WARN("MMIO map not available\n");
	}

	/* add memory regions */
	mmap_add_region(rw_start, rw_start,
	rw_size,
	MT_MEMORY \| MT_RW \| MT_SECURE);
	mmap_add_region(rodata_start, rodata_start,
	rodata_size,
	MT_RO_DATA \| MT_SECURE);
	mmap_add_region(code_base, code_base,
	code_size,
	MT_CODE \| MT_SECURE);

	/* map TZDRAM used by BL31 as coherent memory */
	if (TEGRA_TZRAM_BASE == tegra_bl31_phys_base) {
	mmap_add_region(params_from_bl2->tzdram_base,
	params_from_bl2->tzdram_base,
	BL31_SIZE,
	MT_DEVICE \| MT_RW \| MT_SECURE);
	}

	/* set up translation tables */
	init_xlat_tables();

	/* enable the MMU */
	enable_mmu_el3(0);

	/*
	* Add timestamp for arch setup exit.
	*/
	boot_profiler_add_record("[TF] arch setup exit");

	INFO("BL3-1: Tegra: MMU enabled\n");
	}

	/*******************************************************************************
	* Check if the given NS DRAM range is valid
	******************************************************************************/
	int32_t bl31_check_ns_address(uint64_t base, uint64_t size_in_bytes)
	{
	uint64_t end = base + size_in_bytes - U(1);

	/*
	* Sanity check the input values
	*/
	if ((base == 0U) \|\| (size_in_bytes == 0U)) {
	ERROR("NS address 0x%" PRIx64 " (%" PRId64 " bytes) is invalid\n",
	base, size_in_bytes);
	return -EINVAL;
	}

	/*
	* Check if the NS DRAM address is valid
	*/
	if ((base < TEGRA_DRAM_BASE) \|\| (base >= TEGRA_DRAM_END) \|\|
	(end > TEGRA_DRAM_END)) {

	ERROR("NS address 0x%" PRIx64 " is out-of-bounds!\n", base);
	return -EFAULT;
	}

	/*
	* TZDRAM aperture contains the BL31 and BL32 images, so we need
	* to check if the NS DRAM range overlaps the TZDRAM aperture.
	*/
	if ((base < (uint64_t)TZDRAM_END) && (end > tegra_bl31_phys_base)) {
	ERROR("NS address 0x%" PRIx64 " overlaps TZDRAM!\n", base);
	return -ENOTSUP;
	}

	/* valid NS address */
	return 0;
	}