include/bl31/context.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */

 #ifndef __CONTEXT_H__
 #define __CONTEXT_H__

 /*******************************************************************************
  * Constants that allow assembler code to access members of and the 'gp_regs'
  * structure at their correct offsets.
  ******************************************************************************/
 #define CTX_GPREGS_OFFSET	0x0
 #define CTX_GPREG_X0		0x0
 #define CTX_GPREG_X1		0x8
 #define CTX_GPREG_X2		0x10
 #define CTX_GPREG_X3		0x18
 #define CTX_GPREG_X4		0x20
 #define CTX_GPREG_X5		0x28
 #define CTX_GPREG_X6		0x30
 #define CTX_GPREG_X7		0x38
 #define CTX_GPREG_X8		0x40
 #define CTX_GPREG_X9		0x48
 #define CTX_GPREG_X10		0x50
 #define CTX_GPREG_X11		0x58
 #define CTX_GPREG_X12		0x60
 #define CTX_GPREG_X13		0x68
 #define CTX_GPREG_X14		0x70
 #define CTX_GPREG_X15		0x78
 #define CTX_GPREG_X16		0x80
 #define CTX_GPREG_X17		0x88
 #define CTX_GPREG_X18		0x90
 #define CTX_GPREG_X19		0x98
 #define CTX_GPREG_X20		0xa0
 #define CTX_GPREG_X21		0xa8
 #define CTX_GPREG_X22		0xb0
 #define CTX_GPREG_X23		0xb8
 #define CTX_GPREG_X24		0xc0
 #define CTX_GPREG_X25		0xc8
 #define CTX_GPREG_X26		0xd0
 #define CTX_GPREG_X27		0xd8
 #define CTX_GPREG_X28		0xe0
 #define CTX_GPREG_X29		0xe8
 #define CTX_GPREG_LR		0xf0
 #define CTX_GPREG_SP_EL0	0xf8
 #define CTX_GPREGS_END		0x100

 /*******************************************************************************
  * Constants that allow assembler code to access members of and the 'el3_state'
  * structure at their correct offsets. Note that some of the registers are only
  * 32-bits wide but are stored as 64-bit values for convenience
  ******************************************************************************/
 #define CTX_EL3STATE_OFFSET	(CTX_GPREGS_OFFSET + CTX_GPREGS_END)
 #define CTX_SCR_EL3		0x0
 #define CTX_RUNTIME_SP		0x8
 #define CTX_SPSR_EL3		0x10
 #define CTX_ELR_EL3		0x18
 #define CTX_CPTR_EL3		0x20
 #define CTX_CNTFRQ_EL0		0x28
 #define CTX_EL3STATE_END	0x30

 /*******************************************************************************
  * Constants that allow assembler code to access members of and the
  * 'el1_sys_regs' structure at their correct offsets. Note that some of the
  * registers are only 32-bits wide but are stored as 64-bit values for
  * convenience
  ******************************************************************************/
 #define CTX_SYSREGS_OFFSET	(CTX_EL3STATE_OFFSET + CTX_EL3STATE_END)
 #define CTX_SPSR_EL1		0x0
 #define CTX_ELR_EL1		0x8
 #define CTX_SPSR_ABT		0x10
 #define CTX_SPSR_UND		0x18
 #define CTX_SPSR_IRQ		0x20
 #define CTX_SPSR_FIQ		0x28
 #define CTX_SCTLR_EL1		0x30
 #define CTX_ACTLR_EL1		0x38
 #define CTX_CPACR_EL1		0x40
 #define CTX_CSSELR_EL1		0x48
 #define CTX_SP_EL1		0x50
 #define CTX_ESR_EL1		0x58
 #define CTX_TTBR0_EL1		0x60
 #define CTX_TTBR1_EL1		0x68
 #define CTX_MAIR_EL1		0x70
 #define CTX_AMAIR_EL1		0x78
 #define CTX_TCR_EL1		0x80
 #define CTX_TPIDR_EL1		0x88
 #define CTX_TPIDR_EL0		0x90
 #define CTX_TPIDRRO_EL0		0x98
 #define CTX_DACR32_EL2		0xa0
 #define CTX_IFSR32_EL2		0xa8
 #define CTX_PAR_EL1		0xb0
 #define CTX_FAR_EL1		0xb8
 #define CTX_AFSR0_EL1		0xc0
 #define CTX_AFSR1_EL1		0xc8
 #define CTX_CONTEXTIDR_EL1	0xd0
 #define CTX_VBAR_EL1		0xd8
 /*
  * If the timer registers aren't saved and restored, we don't have to reserve
  * space for them in the context
  */
 #if NS_TIMER_SWITCH
 #define CTX_CNTP_CTL_EL0	0xe0
 #define CTX_CNTP_CVAL_EL0	0xe8
 #define CTX_CNTV_CTL_EL0	0xf0
 #define CTX_CNTV_CVAL_EL0	0xf8
 #define CTX_CNTKCTL_EL1		0x100
 #define CTX_FP_FPEXC32_EL2	0x108
 #define CTX_SYSREGS_END		0x110
 #else
 #define CTX_FP_FPEXC32_EL2	0xe0
 #define CTX_SYSREGS_END		0xf0
 #endif

 /*******************************************************************************
  * Constants that allow assembler code to access members of and the 'fp_regs'
  * structure at their correct offsets.
  ******************************************************************************/
 #if CTX_INCLUDE_FPREGS
 #define CTX_FPREGS_OFFSET	(CTX_SYSREGS_OFFSET + CTX_SYSREGS_END)
 #define CTX_FP_Q0		0x0
 #define CTX_FP_Q1		0x10
 #define CTX_FP_Q2		0x20
 #define CTX_FP_Q3		0x30
 #define CTX_FP_Q4		0x40
 #define CTX_FP_Q5		0x50
 #define CTX_FP_Q6		0x60
 #define CTX_FP_Q7		0x70
 #define CTX_FP_Q8		0x80
 #define CTX_FP_Q9		0x90
 #define CTX_FP_Q10		0xa0
 #define CTX_FP_Q11		0xb0
 #define CTX_FP_Q12		0xc0
 #define CTX_FP_Q13		0xd0
 #define CTX_FP_Q14		0xe0
 #define CTX_FP_Q15		0xf0
 #define CTX_FP_Q16		0x100
 #define CTX_FP_Q17		0x110
 #define CTX_FP_Q18		0x120
 #define CTX_FP_Q19		0x130
 #define CTX_FP_Q20		0x140
 #define CTX_FP_Q21		0x150
 #define CTX_FP_Q22		0x160
 #define CTX_FP_Q23		0x170
 #define CTX_FP_Q24		0x180
 #define CTX_FP_Q25		0x190
 #define CTX_FP_Q26		0x1a0
 #define CTX_FP_Q27		0x1b0
 #define CTX_FP_Q28		0x1c0
 #define CTX_FP_Q29		0x1d0
 #define CTX_FP_Q30		0x1e0
 #define CTX_FP_Q31		0x1f0
 #define CTX_FP_FPSR		0x200
 #define CTX_FP_FPCR		0x208
 #define CTX_FPREGS_END		0x210
 #endif

 #ifndef __ASSEMBLY__

 #include <cassert.h>
 #include <platform_def.h>	/* for CACHE_WRITEBACK_GRANULE */
 #include <stdint.h>

 /*
  * Common constants to help define the 'cpu_context' structure and its
  * members below.
  */
 #define DWORD_SHIFT		3
 #define DEFINE_REG_STRUCT(name, num_regs)	\
 	typedef struct name {			\
 		uint64_t _regs[num_regs];	\
 	}  __aligned(16) name##_t

 /* Constants to determine the size of individual context structures */
 #define CTX_GPREG_ALL		(CTX_GPREGS_END >> DWORD_SHIFT)
 #define CTX_SYSREG_ALL		(CTX_SYSREGS_END >> DWORD_SHIFT)
 #if CTX_INCLUDE_FPREGS
 #define CTX_FPREG_ALL		(CTX_FPREGS_END >> DWORD_SHIFT)
 #endif
 #define CTX_EL3STATE_ALL	(CTX_EL3STATE_END >> DWORD_SHIFT)

 /*
  * AArch64 general purpose register context structure. Usually x0-x18,
  * lr are saved as the compiler is expected to preserve the remaining
  * callee saved registers if used by the C runtime and the assembler
  * does not touch the remaining. But in case of world switch during
  * exception handling, we need to save the callee registers too.
  */
 DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL);

 /*
  * AArch64 EL1 system register context structure for preserving the
  * architectural state during switches from one security state to
  * another in EL1.
  */
 DEFINE_REG_STRUCT(el1_sys_regs, CTX_SYSREG_ALL);

 /*
  * AArch64 floating point register context structure for preserving
  * the floating point state during switches from one security state to
  * another.
  */
 #if CTX_INCLUDE_FPREGS
 DEFINE_REG_STRUCT(fp_regs, CTX_FPREG_ALL);
 #endif

 /*
  * Miscellaneous registers used by EL3 firmware to maintain its state
  * across exception entries and exits
  */
 DEFINE_REG_STRUCT(el3_state, CTX_EL3STATE_ALL);

 /*
  * Macros to access members of any of the above structures using their
  * offsets
  */
 #define read_ctx_reg(ctx, offset)	((ctx)->_regs[offset >> DWORD_SHIFT])
 #define write_ctx_reg(ctx, offset, val)	(((ctx)->_regs[offset >> DWORD_SHIFT]) \
 					 = val)

 /*
  * Top-level context structure which is used by EL3 firmware to
  * preserve the state of a core at EL1 in one of the two security
  * states and save enough EL3 meta data to be able to return to that
  * EL and security state. The context management library will be used
  * to ensure that SP_EL3 always points to an instance of this
  * structure at exception entry and exit. Each instance will
  * correspond to either the secure or the non-secure state.
  */
 typedef struct cpu_context {
 	gp_regs_t gpregs_ctx;
 	el3_state_t el3state_ctx;
 	el1_sys_regs_t sysregs_ctx;
 #if CTX_INCLUDE_FPREGS
 	fp_regs_t fpregs_ctx;
 #endif
 } cpu_context_t;

 /* Macros to access members of the 'cpu_context_t' structure */
 #define get_el3state_ctx(h)	(&((cpu_context_t *) h)->el3state_ctx)
 #if CTX_INCLUDE_FPREGS
 #define get_fpregs_ctx(h)	(&((cpu_context_t *) h)->fpregs_ctx)
 #endif
 #define get_sysregs_ctx(h)	(&((cpu_context_t *) h)->sysregs_ctx)
 #define get_gpregs_ctx(h)	(&((cpu_context_t *) h)->gpregs_ctx)

 /*
  * Compile time assertions related to the 'cpu_context' structure to
  * ensure that the assembler and the compiler view of the offsets of
  * the structure members is the same.
  */
 CASSERT(CTX_GPREGS_OFFSET == __builtin_offsetof(cpu_context_t, gpregs_ctx), \
 	assert_core_context_gp_offset_mismatch);
 CASSERT(CTX_SYSREGS_OFFSET == __builtin_offsetof(cpu_context_t, sysregs_ctx), \
 	assert_core_context_sys_offset_mismatch);
 #if CTX_INCLUDE_FPREGS
 CASSERT(CTX_FPREGS_OFFSET == __builtin_offsetof(cpu_context_t, fpregs_ctx), \
 	assert_core_context_fp_offset_mismatch);
 #endif
 CASSERT(CTX_EL3STATE_OFFSET == __builtin_offsetof(cpu_context_t, el3state_ctx), \
 	assert_core_context_el3state_offset_mismatch);

 /*
  * Helper macro to set the general purpose registers that correspond to
  * parameters in an aapcs_64 call i.e. x0-x7
  */
 #define set_aapcs_args0(ctx, x0)				do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, x0);	\
 	} while (0);
 #define set_aapcs_args1(ctx, x0, x1)				do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, x1);	\
 		set_aapcs_args0(ctx, x0);				\
 	} while (0);
 #define set_aapcs_args2(ctx, x0, x1, x2)			do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, x2);	\
 		set_aapcs_args1(ctx, x0, x1);				\
 	} while (0);
 #define set_aapcs_args3(ctx, x0, x1, x2, x3)			do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, x3);	\
 		set_aapcs_args2(ctx, x0, x1, x2);			\
 	} while (0);
 #define set_aapcs_args4(ctx, x0, x1, x2, x3, x4)		do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X4, x4);	\
 		set_aapcs_args3(ctx, x0, x1, x2, x3);			\
 	} while (0);
 #define set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5)		do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X5, x5);	\
 		set_aapcs_args4(ctx, x0, x1, x2, x3, x4);		\
 	} while (0);
 #define set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6)	do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X6, x6);	\
 		set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5);		\
 	} while (0);
 #define set_aapcs_args7(ctx, x0, x1, x2, x3, x4, x5, x6, x7)	do {	\
 		write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X7, x7);	\
 		set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6);	\
 	} while (0);

 /*******************************************************************************
  * Function prototypes
  ******************************************************************************/
 void el3_sysregs_context_save(el3_state_t *regs);
 void el3_sysregs_context_restore(el3_state_t *regs);
 void el1_sysregs_context_save(el1_sys_regs_t *regs);
 void el1_sysregs_context_restore(el1_sys_regs_t *regs);
 #if CTX_INCLUDE_FPREGS
 void fpregs_context_save(fp_regs_t *regs);
 void fpregs_context_restore(fp_regs_t *regs);
 #endif


 #undef CTX_SYSREG_ALL
 #if CTX_INCLUDE_FPREGS
 #undef CTX_FPREG_ALL
 #endif
 #undef CTX_GPREG_ALL
 #undef CTX_EL3STATE_ALL

 #endif /* __ASSEMBLY__ */

 #endif /* __CONTEXT_H__ */
	/*
	* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	#ifndef __CONTEXT_H__
	#define __CONTEXT_H__

	/*******************************************************************************
	* Constants that allow assembler code to access members of and the 'gp_regs'
	* structure at their correct offsets.
	******************************************************************************/
	#define CTX_GPREGS_OFFSET 0x0
	#define CTX_GPREG_X0 0x0
	#define CTX_GPREG_X1 0x8
	#define CTX_GPREG_X2 0x10
	#define CTX_GPREG_X3 0x18
	#define CTX_GPREG_X4 0x20
	#define CTX_GPREG_X5 0x28
	#define CTX_GPREG_X6 0x30
	#define CTX_GPREG_X7 0x38
	#define CTX_GPREG_X8 0x40
	#define CTX_GPREG_X9 0x48
	#define CTX_GPREG_X10 0x50
	#define CTX_GPREG_X11 0x58
	#define CTX_GPREG_X12 0x60
	#define CTX_GPREG_X13 0x68
	#define CTX_GPREG_X14 0x70
	#define CTX_GPREG_X15 0x78
	#define CTX_GPREG_X16 0x80
	#define CTX_GPREG_X17 0x88
	#define CTX_GPREG_X18 0x90
	#define CTX_GPREG_X19 0x98
	#define CTX_GPREG_X20 0xa0
	#define CTX_GPREG_X21 0xa8
	#define CTX_GPREG_X22 0xb0
	#define CTX_GPREG_X23 0xb8
	#define CTX_GPREG_X24 0xc0
	#define CTX_GPREG_X25 0xc8
	#define CTX_GPREG_X26 0xd0
	#define CTX_GPREG_X27 0xd8
	#define CTX_GPREG_X28 0xe0
	#define CTX_GPREG_X29 0xe8
	#define CTX_GPREG_LR 0xf0
	#define CTX_GPREG_SP_EL0 0xf8
	#define CTX_GPREGS_END 0x100

	/*******************************************************************************
	* Constants that allow assembler code to access members of and the 'el3_state'
	* structure at their correct offsets. Note that some of the registers are only
	* 32-bits wide but are stored as 64-bit values for convenience
	******************************************************************************/
	#define CTX_EL3STATE_OFFSET (CTX_GPREGS_OFFSET + CTX_GPREGS_END)
	#define CTX_SCR_EL3 0x0
	#define CTX_RUNTIME_SP 0x8
	#define CTX_SPSR_EL3 0x10
	#define CTX_ELR_EL3 0x18
	#define CTX_CPTR_EL3 0x20
	#define CTX_CNTFRQ_EL0 0x28
	#define CTX_EL3STATE_END 0x30

	/*******************************************************************************
	* Constants that allow assembler code to access members of and the
	* 'el1_sys_regs' structure at their correct offsets. Note that some of the
	* registers are only 32-bits wide but are stored as 64-bit values for
	* convenience
	******************************************************************************/
	#define CTX_SYSREGS_OFFSET (CTX_EL3STATE_OFFSET + CTX_EL3STATE_END)
	#define CTX_SPSR_EL1 0x0
	#define CTX_ELR_EL1 0x8
	#define CTX_SPSR_ABT 0x10
	#define CTX_SPSR_UND 0x18
	#define CTX_SPSR_IRQ 0x20
	#define CTX_SPSR_FIQ 0x28
	#define CTX_SCTLR_EL1 0x30
	#define CTX_ACTLR_EL1 0x38
	#define CTX_CPACR_EL1 0x40
	#define CTX_CSSELR_EL1 0x48
	#define CTX_SP_EL1 0x50
	#define CTX_ESR_EL1 0x58
	#define CTX_TTBR0_EL1 0x60
	#define CTX_TTBR1_EL1 0x68
	#define CTX_MAIR_EL1 0x70
	#define CTX_AMAIR_EL1 0x78
	#define CTX_TCR_EL1 0x80
	#define CTX_TPIDR_EL1 0x88
	#define CTX_TPIDR_EL0 0x90
	#define CTX_TPIDRRO_EL0 0x98
	#define CTX_DACR32_EL2 0xa0
	#define CTX_IFSR32_EL2 0xa8
	#define CTX_PAR_EL1 0xb0
	#define CTX_FAR_EL1 0xb8
	#define CTX_AFSR0_EL1 0xc0
	#define CTX_AFSR1_EL1 0xc8
	#define CTX_CONTEXTIDR_EL1 0xd0
	#define CTX_VBAR_EL1 0xd8
	/*
	* If the timer registers aren't saved and restored, we don't have to reserve
	* space for them in the context
	*/
	#if NS_TIMER_SWITCH
	#define CTX_CNTP_CTL_EL0 0xe0
	#define CTX_CNTP_CVAL_EL0 0xe8
	#define CTX_CNTV_CTL_EL0 0xf0
	#define CTX_CNTV_CVAL_EL0 0xf8
	#define CTX_CNTKCTL_EL1 0x100
	#define CTX_FP_FPEXC32_EL2 0x108
	#define CTX_SYSREGS_END 0x110
	#else
	#define CTX_FP_FPEXC32_EL2 0xe0
	#define CTX_SYSREGS_END 0xf0
	#endif

	/*******************************************************************************
	* Constants that allow assembler code to access members of and the 'fp_regs'
	* structure at their correct offsets.
	******************************************************************************/
	#if CTX_INCLUDE_FPREGS
	#define CTX_FPREGS_OFFSET (CTX_SYSREGS_OFFSET + CTX_SYSREGS_END)
	#define CTX_FP_Q0 0x0
	#define CTX_FP_Q1 0x10
	#define CTX_FP_Q2 0x20
	#define CTX_FP_Q3 0x30
	#define CTX_FP_Q4 0x40
	#define CTX_FP_Q5 0x50
	#define CTX_FP_Q6 0x60
	#define CTX_FP_Q7 0x70
	#define CTX_FP_Q8 0x80
	#define CTX_FP_Q9 0x90
	#define CTX_FP_Q10 0xa0
	#define CTX_FP_Q11 0xb0
	#define CTX_FP_Q12 0xc0
	#define CTX_FP_Q13 0xd0
	#define CTX_FP_Q14 0xe0
	#define CTX_FP_Q15 0xf0
	#define CTX_FP_Q16 0x100
	#define CTX_FP_Q17 0x110
	#define CTX_FP_Q18 0x120
	#define CTX_FP_Q19 0x130
	#define CTX_FP_Q20 0x140
	#define CTX_FP_Q21 0x150
	#define CTX_FP_Q22 0x160
	#define CTX_FP_Q23 0x170
	#define CTX_FP_Q24 0x180
	#define CTX_FP_Q25 0x190
	#define CTX_FP_Q26 0x1a0
	#define CTX_FP_Q27 0x1b0
	#define CTX_FP_Q28 0x1c0
	#define CTX_FP_Q29 0x1d0
	#define CTX_FP_Q30 0x1e0
	#define CTX_FP_Q31 0x1f0
	#define CTX_FP_FPSR 0x200
	#define CTX_FP_FPCR 0x208
	#define CTX_FPREGS_END 0x210
	#endif

	#ifndef __ASSEMBLY__

	#include <cassert.h>
	#include <platform_def.h> /* for CACHE_WRITEBACK_GRANULE */
	#include <stdint.h>

	/*
	* Common constants to help define the 'cpu_context' structure and its
	* members below.
	*/
	#define DWORD_SHIFT 3
	#define DEFINE_REG_STRUCT(name, num_regs) \
	typedef struct name { \
	uint64_t _regs[num_regs]; \
	} __aligned(16) name##_t

	/* Constants to determine the size of individual context structures */
	#define CTX_GPREG_ALL (CTX_GPREGS_END >> DWORD_SHIFT)
	#define CTX_SYSREG_ALL (CTX_SYSREGS_END >> DWORD_SHIFT)
	#if CTX_INCLUDE_FPREGS
	#define CTX_FPREG_ALL (CTX_FPREGS_END >> DWORD_SHIFT)
	#endif
	#define CTX_EL3STATE_ALL (CTX_EL3STATE_END >> DWORD_SHIFT)

	/*
	* AArch64 general purpose register context structure. Usually x0-x18,
	* lr are saved as the compiler is expected to preserve the remaining
	* callee saved registers if used by the C runtime and the assembler
	* does not touch the remaining. But in case of world switch during
	* exception handling, we need to save the callee registers too.
	*/
	DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL);

	/*
	* AArch64 EL1 system register context structure for preserving the
	* architectural state during switches from one security state to
	* another in EL1.
	*/
	DEFINE_REG_STRUCT(el1_sys_regs, CTX_SYSREG_ALL);

	/*
	* AArch64 floating point register context structure for preserving
	* the floating point state during switches from one security state to
	* another.
	*/
	#if CTX_INCLUDE_FPREGS
	DEFINE_REG_STRUCT(fp_regs, CTX_FPREG_ALL);
	#endif

	/*
	* Miscellaneous registers used by EL3 firmware to maintain its state
	* across exception entries and exits
	*/
	DEFINE_REG_STRUCT(el3_state, CTX_EL3STATE_ALL);

	/*
	* Macros to access members of any of the above structures using their
	* offsets
	*/
	#define read_ctx_reg(ctx, offset) ((ctx)->_regs[offset >> DWORD_SHIFT])
	#define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[offset >> DWORD_SHIFT]) \
	= val)

	/*
	* Top-level context structure which is used by EL3 firmware to
	* preserve the state of a core at EL1 in one of the two security
	* states and save enough EL3 meta data to be able to return to that
	* EL and security state. The context management library will be used
	* to ensure that SP_EL3 always points to an instance of this
	* structure at exception entry and exit. Each instance will
	* correspond to either the secure or the non-secure state.
	*/
	typedef struct cpu_context {
	gp_regs_t gpregs_ctx;
	el3_state_t el3state_ctx;
	el1_sys_regs_t sysregs_ctx;
	#if CTX_INCLUDE_FPREGS
	fp_regs_t fpregs_ctx;
	#endif
	} cpu_context_t;

	/* Macros to access members of the 'cpu_context_t' structure */
	#define get_el3state_ctx(h) (&((cpu_context_t *) h)->el3state_ctx)
	#if CTX_INCLUDE_FPREGS
	#define get_fpregs_ctx(h) (&((cpu_context_t *) h)->fpregs_ctx)
	#endif
	#define get_sysregs_ctx(h) (&((cpu_context_t *) h)->sysregs_ctx)
	#define get_gpregs_ctx(h) (&((cpu_context_t *) h)->gpregs_ctx)

	/*
	* Compile time assertions related to the 'cpu_context' structure to
	* ensure that the assembler and the compiler view of the offsets of
	* the structure members is the same.
	*/
	CASSERT(CTX_GPREGS_OFFSET == __builtin_offsetof(cpu_context_t, gpregs_ctx), \
	assert_core_context_gp_offset_mismatch);
	CASSERT(CTX_SYSREGS_OFFSET == __builtin_offsetof(cpu_context_t, sysregs_ctx), \
	assert_core_context_sys_offset_mismatch);
	#if CTX_INCLUDE_FPREGS
	CASSERT(CTX_FPREGS_OFFSET == __builtin_offsetof(cpu_context_t, fpregs_ctx), \
	assert_core_context_fp_offset_mismatch);
	#endif
	CASSERT(CTX_EL3STATE_OFFSET == __builtin_offsetof(cpu_context_t, el3state_ctx), \
	assert_core_context_el3state_offset_mismatch);

	/*
	* Helper macro to set the general purpose registers that correspond to
	* parameters in an aapcs_64 call i.e. x0-x7
	*/
	#define set_aapcs_args0(ctx, x0) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, x0); \
	} while (0);
	#define set_aapcs_args1(ctx, x0, x1) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, x1); \
	set_aapcs_args0(ctx, x0); \
	} while (0);
	#define set_aapcs_args2(ctx, x0, x1, x2) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, x2); \
	set_aapcs_args1(ctx, x0, x1); \
	} while (0);
	#define set_aapcs_args3(ctx, x0, x1, x2, x3) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, x3); \
	set_aapcs_args2(ctx, x0, x1, x2); \
	} while (0);
	#define set_aapcs_args4(ctx, x0, x1, x2, x3, x4) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X4, x4); \
	set_aapcs_args3(ctx, x0, x1, x2, x3); \
	} while (0);
	#define set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X5, x5); \
	set_aapcs_args4(ctx, x0, x1, x2, x3, x4); \
	} while (0);
	#define set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X6, x6); \
	set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5); \
	} while (0);
	#define set_aapcs_args7(ctx, x0, x1, x2, x3, x4, x5, x6, x7) do { \
	write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X7, x7); \
	set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6); \
	} while (0);

	/*******************************************************************************
	* Function prototypes
	******************************************************************************/
	void el3_sysregs_context_save(el3_state_t *regs);
	void el3_sysregs_context_restore(el3_state_t *regs);
	void el1_sysregs_context_save(el1_sys_regs_t *regs);
	void el1_sysregs_context_restore(el1_sys_regs_t *regs);
	#if CTX_INCLUDE_FPREGS
	void fpregs_context_save(fp_regs_t *regs);
	void fpregs_context_restore(fp_regs_t *regs);
	#endif


	#undef CTX_SYSREG_ALL
	#if CTX_INCLUDE_FPREGS
	#undef CTX_FPREG_ALL
	#endif
	#undef CTX_GPREG_ALL
	#undef CTX_EL3STATE_ALL

	#endif /* __ASSEMBLY__ */

	#endif /* __CONTEXT_H__ */