| /* |
| * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <plat_macros.S> |
| #include <platform_def.h> |
| |
| #include <arch.h> |
| #include <asm_macros.S> |
| #include <context.h> |
| #include <lib/el3_runtime/cpu_data.h> |
| #include <lib/utils_def.h> |
| |
| .globl report_unhandled_exception |
| .globl report_unhandled_interrupt |
| .globl el3_panic |
| |
| #if CRASH_REPORTING |
| |
| /* ------------------------------------------------------ |
| * The below section deals with dumping the system state |
| * when an unhandled exception is taken in EL3. |
| * The layout and the names of the registers which will |
| * be dumped during a unhandled exception is given below. |
| * ------------------------------------------------------ |
| */ |
| .section .rodata.crash_prints, "aS" |
| print_spacer: |
| .asciz " = 0x" |
| |
| gp_regs: |
| .asciz "x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",\ |
| "x8", "x9", "x10", "x11", "x12", "x13", "x14", "x15",\ |
| "x16", "x17", "x18", "x19", "x20", "x21", "x22",\ |
| "x23", "x24", "x25", "x26", "x27", "x28", "x29", "" |
| el3_sys_regs: |
| .asciz "scr_el3", "sctlr_el3", "cptr_el3", "tcr_el3",\ |
| "daif", "mair_el3", "spsr_el3", "elr_el3", "ttbr0_el3",\ |
| "esr_el3", "far_el3", "" |
| |
| non_el3_sys_regs: |
| .asciz "spsr_el1", "elr_el1", "spsr_abt", "spsr_und",\ |
| "spsr_irq", "spsr_fiq", "sctlr_el1", "actlr_el1", "cpacr_el1",\ |
| "csselr_el1", "sp_el1", "esr_el1", "ttbr0_el1", "ttbr1_el1",\ |
| "mair_el1", "amair_el1", "tcr_el1", "tpidr_el1", "tpidr_el0",\ |
| "tpidrro_el0", "par_el1", "mpidr_el1", "afsr0_el1", "afsr1_el1",\ |
| "contextidr_el1", "vbar_el1", "cntp_ctl_el0", "cntp_cval_el0",\ |
| "cntv_ctl_el0", "cntv_cval_el0", "cntkctl_el1", "sp_el0", "isr_el1", "" |
| |
| #if CTX_INCLUDE_AARCH32_REGS |
| aarch32_regs: |
| .asciz "dacr32_el2", "ifsr32_el2", "" |
| #endif /* CTX_INCLUDE_AARCH32_REGS */ |
| |
| panic_msg: |
| .asciz "PANIC in EL3.\nx30" |
| excpt_msg: |
| .asciz "Unhandled Exception in EL3.\nx30" |
| intr_excpt_msg: |
| .asciz "Unhandled Interrupt Exception in EL3.\nx30" |
| |
| /* |
| * Helper function to print from crash buf. |
| * The print loop is controlled by the buf size and |
| * ascii reg name list which is passed in x6. The |
| * function returns the crash buf address in x0. |
| * Clobbers : x0 - x7, sp |
| */ |
| func size_controlled_print |
| /* Save the lr */ |
| mov sp, x30 |
| /* load the crash buf address */ |
| mrs x7, tpidr_el3 |
| test_size_list: |
| /* Calculate x5 always as it will be clobbered by asm_print_hex */ |
| mrs x5, tpidr_el3 |
| add x5, x5, #CPU_DATA_CRASH_BUF_SIZE |
| /* Test whether we have reached end of crash buf */ |
| cmp x7, x5 |
| b.eq exit_size_print |
| ldrb w4, [x6] |
| /* Test whether we are at end of list */ |
| cbz w4, exit_size_print |
| mov x4, x6 |
| /* asm_print_str updates x4 to point to next entry in list */ |
| bl asm_print_str |
| /* x0 = number of symbols printed + 1 */ |
| sub x0, x4, x6 |
| /* update x6 with the updated list pointer */ |
| mov x6, x4 |
| bl print_alignment |
| ldr x4, [x7], #REGSZ |
| bl asm_print_hex |
| bl asm_print_newline |
| b test_size_list |
| exit_size_print: |
| mov x30, sp |
| ret |
| endfunc size_controlled_print |
| |
| /* ----------------------------------------------------- |
| * This function calculates and prints required number |
| * of space characters followed by "= 0x", based on the |
| * length of ascii register name. |
| * x0: length of ascii register name + 1 |
| * ------------------------------------------------------ |
| */ |
| func print_alignment |
| /* The minimum ascii length is 3, e.g. for "x0" */ |
| adr x4, print_spacer - 3 |
| add x4, x4, x0 |
| b asm_print_str |
| endfunc print_alignment |
| |
| /* |
| * Helper function to store x8 - x15 registers to |
| * the crash buf. The system registers values are |
| * copied to x8 to x15 by the caller which are then |
| * copied to the crash buf by this function. |
| * x0 points to the crash buf. It then calls |
| * size_controlled_print to print to console. |
| * Clobbers : x0 - x7, sp |
| */ |
| func str_in_crash_buf_print |
| /* restore the crash buf address in x0 */ |
| mrs x0, tpidr_el3 |
| stp x8, x9, [x0] |
| stp x10, x11, [x0, #REGSZ * 2] |
| stp x12, x13, [x0, #REGSZ * 4] |
| stp x14, x15, [x0, #REGSZ * 6] |
| b size_controlled_print |
| endfunc str_in_crash_buf_print |
| |
| /* ------------------------------------------------------ |
| * This macro calculates the offset to crash buf from |
| * cpu_data and stores it in tpidr_el3. It also saves x0 |
| * and x1 in the crash buf by using sp as a temporary |
| * register. |
| * ------------------------------------------------------ |
| */ |
| .macro prepare_crash_buf_save_x0_x1 |
| /* we can corrupt this reg to free up x0 */ |
| mov sp, x0 |
| /* tpidr_el3 contains the address to cpu_data structure */ |
| mrs x0, tpidr_el3 |
| /* Calculate the Crash buffer offset in cpu_data */ |
| add x0, x0, #CPU_DATA_CRASH_BUF_OFFSET |
| /* Store crash buffer address in tpidr_el3 */ |
| msr tpidr_el3, x0 |
| str x1, [x0, #REGSZ] |
| mov x1, sp |
| str x1, [x0] |
| .endm |
| |
| /* ----------------------------------------------------- |
| * This function allows to report a crash (if crash |
| * reporting is enabled) when an unhandled exception |
| * occurs. It prints the CPU state via the crash console |
| * making use of the crash buf. This function will |
| * not return. |
| * ----------------------------------------------------- |
| */ |
| func report_unhandled_exception |
| prepare_crash_buf_save_x0_x1 |
| adr x0, excpt_msg |
| mov sp, x0 |
| /* This call will not return */ |
| b do_crash_reporting |
| endfunc report_unhandled_exception |
| |
| |
| /* ----------------------------------------------------- |
| * This function allows to report a crash (if crash |
| * reporting is enabled) when an unhandled interrupt |
| * occurs. It prints the CPU state via the crash console |
| * making use of the crash buf. This function will |
| * not return. |
| * ----------------------------------------------------- |
| */ |
| func report_unhandled_interrupt |
| prepare_crash_buf_save_x0_x1 |
| adr x0, intr_excpt_msg |
| mov sp, x0 |
| /* This call will not return */ |
| b do_crash_reporting |
| endfunc report_unhandled_interrupt |
| |
| /* ----------------------------------------------------- |
| * This function allows to report a crash (if crash |
| * reporting is enabled) when panic() is invoked from |
| * C Runtime. It prints the CPU state via the crash |
| * console making use of the crash buf. This function |
| * will not return. |
| * ----------------------------------------------------- |
| */ |
| func el3_panic |
| msr spsel, #MODE_SP_ELX |
| prepare_crash_buf_save_x0_x1 |
| adr x0, panic_msg |
| mov sp, x0 |
| /* This call will not return */ |
| b do_crash_reporting |
| endfunc el3_panic |
| |
| /* ------------------------------------------------------------ |
| * The common crash reporting functionality. It requires x0 |
| * and x1 has already been stored in crash buf, sp points to |
| * crash message and tpidr_el3 contains the crash buf address. |
| * The function does the following: |
| * - Retrieve the crash buffer from tpidr_el3 |
| * - Store x2 to x6 in the crash buffer |
| * - Initialise the crash console. |
| * - Print the crash message by using the address in sp. |
| * - Print x30 value to the crash console. |
| * - Print x0 - x7 from the crash buf to the crash console. |
| * - Print x8 - x29 (in groups of 8 registers) using the |
| * crash buf to the crash console. |
| * - Print el3 sys regs (in groups of 8 registers) using the |
| * crash buf to the crash console. |
| * - Print non el3 sys regs (in groups of 8 registers) using |
| * the crash buf to the crash console. |
| * ------------------------------------------------------------ |
| */ |
| func do_crash_reporting |
| /* Retrieve the crash buf from tpidr_el3 */ |
| mrs x0, tpidr_el3 |
| /* Store x2 - x6, x30 in the crash buffer */ |
| stp x2, x3, [x0, #REGSZ * 2] |
| stp x4, x5, [x0, #REGSZ * 4] |
| stp x6, x30, [x0, #REGSZ * 6] |
| /* Initialize the crash console */ |
| bl plat_crash_console_init |
| /* Verify the console is initialized */ |
| cbz x0, crash_panic |
| /* Print the crash message. sp points to the crash message */ |
| mov x4, sp |
| bl asm_print_str |
| /* Print spaces to align "x30" string */ |
| mov x0, #4 |
| bl print_alignment |
| /* load the crash buf address */ |
| mrs x0, tpidr_el3 |
| /* report x30 first from the crash buf */ |
| ldr x4, [x0, #REGSZ * 7] |
| |
| #if ENABLE_PAUTH |
| /* Demangle address */ |
| xpaci x4 |
| #endif |
| bl asm_print_hex |
| bl asm_print_newline |
| /* Load the crash buf address */ |
| mrs x0, tpidr_el3 |
| /* Now mov x7 into crash buf */ |
| str x7, [x0, #REGSZ * 7] |
| |
| /* Report x0 - x29 values stored in crash buf*/ |
| /* Store the ascii list pointer in x6 */ |
| adr x6, gp_regs |
| /* Print x0 to x7 from the crash buf */ |
| bl size_controlled_print |
| /* Store x8 - x15 in crash buf and print */ |
| bl str_in_crash_buf_print |
| /* Load the crash buf address */ |
| mrs x0, tpidr_el3 |
| /* Store the rest of gp regs and print */ |
| stp x16, x17, [x0] |
| stp x18, x19, [x0, #REGSZ * 2] |
| stp x20, x21, [x0, #REGSZ * 4] |
| stp x22, x23, [x0, #REGSZ * 6] |
| bl size_controlled_print |
| /* Load the crash buf address */ |
| mrs x0, tpidr_el3 |
| stp x24, x25, [x0] |
| stp x26, x27, [x0, #REGSZ * 2] |
| stp x28, x29, [x0, #REGSZ * 4] |
| bl size_controlled_print |
| |
| /* Print the el3 sys registers */ |
| adr x6, el3_sys_regs |
| mrs x8, scr_el3 |
| mrs x9, sctlr_el3 |
| mrs x10, cptr_el3 |
| mrs x11, tcr_el3 |
| mrs x12, daif |
| mrs x13, mair_el3 |
| mrs x14, spsr_el3 |
| mrs x15, elr_el3 |
| bl str_in_crash_buf_print |
| mrs x8, ttbr0_el3 |
| mrs x9, esr_el3 |
| mrs x10, far_el3 |
| bl str_in_crash_buf_print |
| |
| /* Print the non el3 sys registers */ |
| adr x6, non_el3_sys_regs |
| mrs x8, spsr_el1 |
| mrs x9, elr_el1 |
| mrs x10, spsr_abt |
| mrs x11, spsr_und |
| mrs x12, spsr_irq |
| mrs x13, spsr_fiq |
| mrs x14, sctlr_el1 |
| mrs x15, actlr_el1 |
| bl str_in_crash_buf_print |
| mrs x8, cpacr_el1 |
| mrs x9, csselr_el1 |
| mrs x10, sp_el1 |
| mrs x11, esr_el1 |
| mrs x12, ttbr0_el1 |
| mrs x13, ttbr1_el1 |
| mrs x14, mair_el1 |
| mrs x15, amair_el1 |
| bl str_in_crash_buf_print |
| mrs x8, tcr_el1 |
| mrs x9, tpidr_el1 |
| mrs x10, tpidr_el0 |
| mrs x11, tpidrro_el0 |
| mrs x12, par_el1 |
| mrs x13, mpidr_el1 |
| mrs x14, afsr0_el1 |
| mrs x15, afsr1_el1 |
| bl str_in_crash_buf_print |
| mrs x8, contextidr_el1 |
| mrs x9, vbar_el1 |
| mrs x10, cntp_ctl_el0 |
| mrs x11, cntp_cval_el0 |
| mrs x12, cntv_ctl_el0 |
| mrs x13, cntv_cval_el0 |
| mrs x14, cntkctl_el1 |
| mrs x15, sp_el0 |
| bl str_in_crash_buf_print |
| mrs x8, isr_el1 |
| bl str_in_crash_buf_print |
| |
| #if CTX_INCLUDE_AARCH32_REGS |
| /* Print the AArch32 registers */ |
| adr x6, aarch32_regs |
| mrs x8, dacr32_el2 |
| mrs x9, ifsr32_el2 |
| bl str_in_crash_buf_print |
| #endif /* CTX_INCLUDE_AARCH32_REGS */ |
| |
| /* Get the cpu specific registers to report */ |
| bl do_cpu_reg_dump |
| bl str_in_crash_buf_print |
| |
| /* Print some platform registers */ |
| plat_crash_print_regs |
| |
| bl plat_crash_console_flush |
| |
| /* Done reporting */ |
| no_ret plat_panic_handler |
| endfunc do_crash_reporting |
| |
| #else /* CRASH_REPORTING */ |
| func report_unhandled_exception |
| report_unhandled_interrupt: |
| no_ret plat_panic_handler |
| endfunc report_unhandled_exception |
| #endif /* CRASH_REPORTING */ |
| |
| |
| func crash_panic |
| no_ret plat_panic_handler |
| endfunc crash_panic |