| /* |
| * Copyright 2020-2022 NXP |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <stdbool.h> |
| |
| #include <arch_helpers.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <context.h> |
| #include <drivers/arm/tzc380.h> |
| #include <drivers/console.h> |
| #include <drivers/generic_delay_timer.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/mmio.h> |
| #include <lib/xlat_tables/xlat_tables_v2.h> |
| #include <plat/common/platform.h> |
| |
| #include <gpc.h> |
| #include <imx_aipstz.h> |
| #include <imx_uart.h> |
| #include <imx_rdc.h> |
| #include <imx8m_caam.h> |
| #include <platform_def.h> |
| #include <plat_imx8.h> |
| |
| static const mmap_region_t imx_mmap[] = { |
| GIC_MAP, AIPS_MAP, OCRAM_S_MAP, DDRC_MAP, |
| NOC_MAP, {0}, |
| }; |
| |
| static const struct aipstz_cfg aipstz[] = { |
| {IMX_AIPSTZ1, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, }, |
| {IMX_AIPSTZ2, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, }, |
| {IMX_AIPSTZ3, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, }, |
| {IMX_AIPSTZ4, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, }, |
| {0}, |
| }; |
| |
| static const struct imx_rdc_cfg rdc[] = { |
| /* Master domain assignment */ |
| RDC_MDAn(RDC_MDA_M7, DID1), |
| |
| /* peripherals domain permission */ |
| RDC_PDAPn(RDC_PDAP_UART2, D0R | D0W), |
| |
| /* memory region */ |
| |
| /* Sentinel */ |
| {0}, |
| }; |
| |
| static entry_point_info_t bl32_image_ep_info; |
| static entry_point_info_t bl33_image_ep_info; |
| |
| /* get SPSR for BL33 entry */ |
| static uint32_t get_spsr_for_bl33_entry(void) |
| { |
| unsigned long el_status; |
| unsigned long mode; |
| uint32_t spsr; |
| |
| /* figure out what mode we enter the non-secure world */ |
| el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; |
| el_status &= ID_AA64PFR0_ELX_MASK; |
| |
| mode = (el_status) ? MODE_EL2 : MODE_EL1; |
| |
| spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); |
| return spsr; |
| } |
| |
| static void bl31_tzc380_setup(void) |
| { |
| unsigned int val; |
| |
| val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28); |
| if ((val & GPR_TZASC_EN) != GPR_TZASC_EN) |
| return; |
| |
| tzc380_init(IMX_TZASC_BASE); |
| |
| /* |
| * Need to substact offset 0x40000000 from CPU address when |
| * programming tzasc region for i.mx8mp. |
| */ |
| |
| /* Enable 1G-5G S/NS RW */ |
| tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) | |
| TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL); |
| } |
| |
| void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1, |
| u_register_t arg2, u_register_t arg3) |
| { |
| static console_t console; |
| unsigned int i; |
| |
| /* Enable CSU NS access permission */ |
| for (i = 0; i < 64; i++) { |
| mmio_write_32(IMX_CSU_BASE + i * 4, 0x00ff00ff); |
| } |
| |
| imx_aipstz_init(aipstz); |
| |
| imx_rdc_init(rdc); |
| |
| imx8m_caam_init(); |
| |
| console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ, |
| IMX_CONSOLE_BAUDRATE, &console); |
| /* This console is only used for boot stage */ |
| console_set_scope(&console, CONSOLE_FLAG_BOOT); |
| |
| /* |
| * tell BL3-1 where the non-secure software image is located |
| * and the entry state information. |
| */ |
| bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET; |
| bl33_image_ep_info.spsr = get_spsr_for_bl33_entry(); |
| SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); |
| |
| #ifdef SPD_opteed |
| /* Populate entry point information for BL32 */ |
| SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0); |
| SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE); |
| bl32_image_ep_info.pc = BL32_BASE; |
| bl32_image_ep_info.spsr = 0; |
| |
| /* Pass TEE base and size to bl33 */ |
| bl33_image_ep_info.args.arg1 = BL32_BASE; |
| bl33_image_ep_info.args.arg2 = BL32_SIZE; |
| #endif |
| |
| bl31_tzc380_setup(); |
| } |
| |
| void bl31_plat_arch_setup(void) |
| { |
| mmap_add_region(BL31_BASE, BL31_BASE, (BL31_LIMIT - BL31_BASE), |
| MT_MEMORY | MT_RW | MT_SECURE); |
| mmap_add_region(BL_CODE_BASE, BL_CODE_BASE, (BL_CODE_END - BL_CODE_BASE), |
| MT_MEMORY | MT_RO | MT_SECURE); |
| #if USE_COHERENT_MEM |
| mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE, |
| (BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE), |
| MT_DEVICE | MT_RW | MT_SECURE); |
| #endif |
| mmap_add(imx_mmap); |
| |
| init_xlat_tables(); |
| |
| enable_mmu_el3(0); |
| } |
| |
| void bl31_platform_setup(void) |
| { |
| generic_delay_timer_init(); |
| |
| /* select the CKIL source to 32K OSC */ |
| mmio_write_32(IMX_ANAMIX_BASE + ANAMIX_MISC_CTL, 0x1); |
| |
| plat_gic_driver_init(); |
| plat_gic_init(); |
| |
| imx_gpc_init(); |
| } |
| |
| entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type) |
| { |
| if (type == NON_SECURE) { |
| return &bl33_image_ep_info; |
| } |
| |
| if (type == SECURE) { |
| return &bl32_image_ep_info; |
| } |
| |
| return NULL; |
| } |
| |
| unsigned int plat_get_syscnt_freq2(void) |
| { |
| return COUNTER_FREQUENCY; |
| } |