| Platform Interrupt Controller API documentation |
| =============================================== |
| |
| .. section-numbering:: |
| :suffix: . |
| |
| .. contents:: |
| |
| This document lists the optional platform interrupt controller API that |
| abstracts the runtime configuration and control of interrupt controller from the |
| generic code. The mandatory APIs are described in the `porting guide`__. |
| |
| .. __: porting-guide.rst#interrupt-management-framework-in-bl31 |
| |
| Function: unsigned int plat_ic_get_running_priority(void); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : void |
| Return : unsigned int |
| |
| This API should return the priority of the interrupt the PE is currently |
| servicing. This must be be called only after an interrupt has already been |
| acknowledged via. ``plat_ic_acknowledge_interrupt``. |
| |
| In the case of ARM standard platforms using GIC, the *Running Priority Register* |
| is read to determine the priority of the interrupt. |
| |
| Function: int plat_ic_is_spi(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| The API should return whether the interrupt ID (first parameter) is categorized |
| as a Shared Peripheral Interrupt. Shared Peripheral Interrupts are typically |
| associated to system-wide peripherals, and these interrupts can target any PE in |
| the system. |
| |
| Function: int plat_ic_is_ppi(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| The API should return whether the interrupt ID (first parameter) is categorized |
| as a Private Peripheral Interrupt. Private Peripheral Interrupts are typically |
| associated with peripherals that are private to each PE. Interrupts from private |
| peripherals target to that PE only. |
| |
| Function: int plat_ic_is_sgi(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| The API should return whether the interrupt ID (first parameter) is categorized |
| as a Software Generated Interrupt. Software Generated Interrupts are raised by |
| explicit programming by software, and are typically used in inter-PE |
| communication. Secure SGIs are reserved for use by Secure world software. |
| |
| Function: unsigned int plat_ic_get_interrupt_active(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| This API should return the *active* status of the interrupt ID specified by the |
| first parameter, ``id``. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API reads |
| the GIC *Set Active Register* to read and return the active status of the |
| interrupt. |
| |
| Function: void plat_ic_enable_interrupt(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : void |
| |
| This API should enable the interrupt ID specified by the first parameter, |
| ``id``. PEs in the system are expected to receive only enabled interrupts. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| inserts barrier to make memory updates visible before enabling interrupt, and |
| then writes to GIC *Set Enable Register* to enable the interrupt. |
| |
| Function: void plat_ic_disable_interrupt(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : void |
| |
| This API should disable the interrupt ID specified by the first parameter, |
| ``id``. PEs in the system are not expected to receive disabled interrupts. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| writes to GIC *Clear Enable Register* to disable the interrupt, and inserts |
| barrier to make memory updates visible afterwards. |
| |
| Function: void plat_ic_set_interrupt_priority(unsigned int id, unsigned int priority); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Argument : unsigned int |
| Return : void |
| |
| This API should set the priority of the interrupt specified by first parameter |
| ``id`` to the value set by the second parameter ``priority``. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| writes to GIC *Priority Register* set interrupt priority. |
| |
| Function: int plat_ic_has_interrupt_type(unsigned int type); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| This API should return whether the platform supports a given interrupt type. The |
| parameter ``type`` shall be one of ``INTR_TYPE_EL3``, ``INTR_TYPE_S_EL1``, or |
| ``INTR_TYPE_NS``. |
| |
| In case of ARM standard platforms using GICv3, the implementation of the API |
| returns ``1`` for all interrupt types. |
| |
| In case of ARM standard platforms using GICv2, the API always return ``1`` for |
| ``INTR_TYPE_NS``. Return value for other types depends on the value of build |
| option ``GICV2_G0_FOR_EL3``: |
| |
| - For interrupt type ``INTR_TYPE_EL3``: |
| |
| - When ``GICV2_G0_FOR_EL3`` is ``0``, it returns ``0``, indicating no support |
| for EL3 interrupts. |
| |
| - When ``GICV2_G0_FOR_EL3`` is ``1``, it returns ``1``, indicating support for |
| EL3 interrupts. |
| |
| - For interrupt type ``INTR_TYPE_S_EL1``: |
| |
| - When ``GICV2_G0_FOR_EL3`` is ``0``, it returns ``1``, indicating support for |
| Secure EL1 interrupts. |
| |
| - When ``GICV2_G0_FOR_EL3`` is ``1``, it returns ``0``, indicating no support |
| for Secure EL1 interrupts. |
| |
| Function: void plat_ic_set_interrupt_type(unsigned int id, unsigned int type); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Argument : unsigned int |
| Return : void |
| |
| This API should set the interrupt specified by first parameter ``id`` to the |
| type specified by second parameter ``type``. The ``type`` parameter can be |
| one of: |
| |
| - ``INTR_TYPE_NS``: interrupt is meant to be consumed by the Non-secure world. |
| |
| - ``INTR_TYPE_S_EL1``: interrupt is meant to be consumed by Secure EL1. |
| |
| - ``INTR_TYPE_EL3``: interrupt is meant to be consumed by EL3. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| writes to the GIC *Group Register* and *Group Modifier Register* (only GICv3) to |
| assign the interrupt to the right group. |
| |
| For GICv3: |
| |
| - ``INTR_TYPE_NS`` maps to Group 1 interrupt. |
| |
| - ``INTR_TYPE_S_EL1`` maps to Secure Group 1 interrupt. |
| |
| - ``INTR_TYPE_EL3`` maps to Secure Group 0 interrupt. |
| |
| For GICv2: |
| |
| - ``INTR_TYPE_NS`` maps to Group 1 interrupt. |
| |
| - When the build option ``GICV2_G0_FOR_EL3`` is set to ``0`` (the default), |
| ``INTR_TYPE_S_EL1`` maps to Group 0. Otherwise, ``INTR_TYPE_EL3`` maps to |
| Group 0 interrupt. |
| |
| Function: void plat_ic_raise_el3_sgi(int sgi_num, u_register_t target); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : int |
| Argument : u_register_t |
| Return : void |
| |
| This API should raise an EL3 SGI. The first parameter, ``sgi_num``, specifies |
| the ID of the SGI. The second parameter, ``target``, must be the MPIDR of the |
| target PE. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| inserts barrier to make memory updates visible before raising SGI, then writes |
| to appropriate *SGI Register* in order to raise the EL3 SGI. |
| |
| Function: void plat_ic_set_spi_routing(unsigned int id, unsigned int routing_mode, u_register_t mpidr); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Argument : unsigned int |
| Argument : u_register_t |
| Return : void |
| |
| This API should set the routing mode of Share Peripheral Interrupt (SPI) |
| specified by first parameter ``id`` to that specified by the second parameter |
| ``routing_mode``. |
| |
| The ``routing_mode`` parameter can be one of: |
| |
| - ``INTR_ROUTING_MODE_ANY`` means the interrupt can be routed to any PE in the |
| system. The ``mpidr`` parameter is ignored in this case. |
| |
| - ``INTR_ROUTING_MODE_PE`` means the interrupt is routed to the PE whose MPIDR |
| value is specified by the parameter ``mpidr``. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| writes to the GIC *Target Register* (GICv2) or *Route Register* (GICv3) to set |
| the routing. |
| |
| Function: void plat_ic_set_interrupt_pending(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : void |
| |
| This API should set the interrupt specified by first parameter ``id`` to |
| *Pending*. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| inserts barrier to make memory updates visible before setting interrupt pending, |
| and writes to the GIC *Set Pending Register* to set the interrupt pending |
| status. |
| |
| Function: void plat_ic_clear_interrupt_pending(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : void |
| |
| This API should clear the *Pending* status of the interrupt specified by first |
| parameter ``id``. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| writes to the GIC *Clear Pending Register* to clear the interrupt pending |
| status, and inserts barrier to make memory updates visible afterwards. |
| |
| Function: unsigned int plat_ic_set_priority_mask(unsigned int id); [optional] |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :: |
| |
| Argument : unsigned int |
| Return : int |
| |
| This API should set the priority mask (first parameter) in the interrupt |
| controller such that only interrupts of higher priority than the supplied one |
| may be signalled to the PE. The API should return the current priority value |
| that it's overwriting. |
| |
| In case of ARM standard platforms using GIC, the implementation of the API |
| inserts to order memory updates before updating mask, then writes to the GIC |
| *Priority Mask Register*, and make sure memory updates are visible before |
| potential trigger due to mask update. |
| |
| ---- |
| |
| *Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.* |