| /* |
| * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef STM32MP1_DEF_H |
| #define STM32MP1_DEF_H |
| |
| #include <common/tbbr/tbbr_img_def.h> |
| #include <drivers/st/stm32mp1_rcc.h> |
| #include <dt-bindings/clock/stm32mp1-clks.h> |
| #include <dt-bindings/reset/stm32mp1-resets.h> |
| #include <lib/utils_def.h> |
| #include <lib/xlat_tables/xlat_tables_defs.h> |
| |
| #ifndef __ASSEMBLER__ |
| #include <drivers/st/bsec.h> |
| #include <drivers/st/stm32mp1_clk.h> |
| |
| #include <boot_api.h> |
| #include <stm32mp_common.h> |
| #include <stm32mp_dt.h> |
| #include <stm32mp_shres_helpers.h> |
| #include <stm32mp1_private.h> |
| #endif |
| |
| /******************************************************************************* |
| * STM32MP1 memory map related constants |
| ******************************************************************************/ |
| |
| #define STM32MP_SYSRAM_BASE U(0x2FFC0000) |
| #define STM32MP_SYSRAM_SIZE U(0x00040000) |
| |
| /* DDR configuration */ |
| #define STM32MP_DDR_BASE U(0xC0000000) |
| #define STM32MP_DDR_MAX_SIZE U(0x40000000) /* Max 1GB */ |
| #ifdef AARCH32_SP_OPTEE |
| #define STM32MP_DDR_S_SIZE U(0x01E00000) /* 30 MB */ |
| #define STM32MP_DDR_SHMEM_SIZE U(0x00200000) /* 2 MB */ |
| #endif |
| |
| /* DDR power initializations */ |
| #ifndef __ASSEMBLER__ |
| enum ddr_type { |
| STM32MP_DDR3, |
| STM32MP_LPDDR2, |
| }; |
| #endif |
| |
| /* Section used inside TF binaries */ |
| #define STM32MP_PARAM_LOAD_SIZE U(0x00002400) /* 9 Ko for param */ |
| /* 256 Octets reserved for header */ |
| #define STM32MP_HEADER_SIZE U(0x00000100) |
| |
| #define STM32MP_BINARY_BASE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE) |
| |
| #define STM32MP_BINARY_SIZE (STM32MP_SYSRAM_SIZE - \ |
| (STM32MP_PARAM_LOAD_SIZE + \ |
| STM32MP_HEADER_SIZE)) |
| |
| #ifdef AARCH32_SP_OPTEE |
| #define STM32MP_BL32_SIZE U(0) |
| |
| #define STM32MP_OPTEE_BASE STM32MP_SYSRAM_BASE |
| |
| #define STM32MP_OPTEE_SIZE (STM32MP_DTB_BASE - \ |
| STM32MP_OPTEE_BASE) |
| #else |
| #if STACK_PROTECTOR_ENABLED |
| #define STM32MP_BL32_SIZE U(0x00012000) /* 72 Ko for BL32 */ |
| #else |
| #define STM32MP_BL32_SIZE U(0x00011000) /* 68 Ko for BL32 */ |
| #endif |
| #endif |
| |
| #define STM32MP_BL32_BASE (STM32MP_SYSRAM_BASE + \ |
| STM32MP_SYSRAM_SIZE - \ |
| STM32MP_BL32_SIZE) |
| |
| #ifdef AARCH32_SP_OPTEE |
| #if STACK_PROTECTOR_ENABLED |
| #define STM32MP_BL2_SIZE U(0x00019000) /* 100 Ko for BL2 */ |
| #else |
| #define STM32MP_BL2_SIZE U(0x00017000) /* 92 Ko for BL2 */ |
| #endif |
| #else |
| #if STACK_PROTECTOR_ENABLED |
| #define STM32MP_BL2_SIZE U(0x00018000) /* 96 Ko for BL2 */ |
| #else |
| #define STM32MP_BL2_SIZE U(0x00016000) /* 88 Ko for BL2 */ |
| #endif |
| #endif |
| |
| #define STM32MP_BL2_BASE (STM32MP_BL32_BASE - \ |
| STM32MP_BL2_SIZE) |
| |
| /* BL2 and BL32/sp_min require 5 tables */ |
| #define MAX_XLAT_TABLES 5 |
| |
| /* |
| * MAX_MMAP_REGIONS is usually: |
| * BL stm32mp1_mmap size + mmap regions in *_plat_arch_setup |
| */ |
| #if defined(IMAGE_BL2) |
| #define MAX_MMAP_REGIONS 11 |
| #endif |
| #if defined(IMAGE_BL32) |
| #define MAX_MMAP_REGIONS 6 |
| #endif |
| |
| /* DTB initialization value */ |
| #define STM32MP_DTB_SIZE U(0x00005000) /* 20Ko for DTB */ |
| |
| #define STM32MP_DTB_BASE (STM32MP_BL2_BASE - \ |
| STM32MP_DTB_SIZE) |
| |
| #define STM32MP_BL33_BASE (STM32MP_DDR_BASE + U(0x100000)) |
| |
| /******************************************************************************* |
| * STM32MP1 device/io map related constants (used for MMU) |
| ******************************************************************************/ |
| #define STM32MP1_DEVICE1_BASE U(0x40000000) |
| #define STM32MP1_DEVICE1_SIZE U(0x40000000) |
| |
| #define STM32MP1_DEVICE2_BASE U(0x80000000) |
| #define STM32MP1_DEVICE2_SIZE U(0x40000000) |
| |
| /******************************************************************************* |
| * STM32MP1 RCC |
| ******************************************************************************/ |
| #define RCC_BASE U(0x50000000) |
| |
| /******************************************************************************* |
| * STM32MP1 PWR |
| ******************************************************************************/ |
| #define PWR_BASE U(0x50001000) |
| |
| /******************************************************************************* |
| * STM32MP1 GPIO |
| ******************************************************************************/ |
| #define GPIOA_BASE U(0x50002000) |
| #define GPIOB_BASE U(0x50003000) |
| #define GPIOC_BASE U(0x50004000) |
| #define GPIOD_BASE U(0x50005000) |
| #define GPIOE_BASE U(0x50006000) |
| #define GPIOF_BASE U(0x50007000) |
| #define GPIOG_BASE U(0x50008000) |
| #define GPIOH_BASE U(0x50009000) |
| #define GPIOI_BASE U(0x5000A000) |
| #define GPIOJ_BASE U(0x5000B000) |
| #define GPIOK_BASE U(0x5000C000) |
| #define GPIOZ_BASE U(0x54004000) |
| #define GPIO_BANK_OFFSET U(0x1000) |
| |
| /* Bank IDs used in GPIO driver API */ |
| #define GPIO_BANK_A U(0) |
| #define GPIO_BANK_B U(1) |
| #define GPIO_BANK_C U(2) |
| #define GPIO_BANK_D U(3) |
| #define GPIO_BANK_E U(4) |
| #define GPIO_BANK_F U(5) |
| #define GPIO_BANK_G U(6) |
| #define GPIO_BANK_H U(7) |
| #define GPIO_BANK_I U(8) |
| #define GPIO_BANK_J U(9) |
| #define GPIO_BANK_K U(10) |
| #define GPIO_BANK_Z U(25) |
| |
| #define STM32MP_GPIOZ_PIN_MAX_COUNT 8 |
| |
| /******************************************************************************* |
| * STM32MP1 UART |
| ******************************************************************************/ |
| #define USART1_BASE U(0x5C000000) |
| #define USART2_BASE U(0x4000E000) |
| #define USART3_BASE U(0x4000F000) |
| #define UART4_BASE U(0x40010000) |
| #define UART5_BASE U(0x40011000) |
| #define USART6_BASE U(0x44003000) |
| #define UART7_BASE U(0x40018000) |
| #define UART8_BASE U(0x40019000) |
| #define STM32MP_UART_BAUDRATE U(115200) |
| |
| /* For UART crash console */ |
| #define STM32MP_DEBUG_USART_BASE UART4_BASE |
| /* UART4 on HSI@64MHz, TX on GPIOG11 Alternate 6 */ |
| #define STM32MP_DEBUG_USART_CLK_FRQ 64000000 |
| #define DEBUG_UART_TX_GPIO_BANK_ADDRESS GPIOG_BASE |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_REG RCC_MP_AHB4ENSETR |
| #define DEBUG_UART_TX_GPIO_BANK_CLK_EN RCC_MP_AHB4ENSETR_GPIOGEN |
| #define DEBUG_UART_TX_GPIO_PORT 11 |
| #define DEBUG_UART_TX_GPIO_ALTERNATE 6 |
| #define DEBUG_UART_TX_CLKSRC_REG RCC_UART24CKSELR |
| #define DEBUG_UART_TX_CLKSRC RCC_UART24CKSELR_HSI |
| #define DEBUG_UART_TX_EN_REG RCC_MP_APB1ENSETR |
| #define DEBUG_UART_TX_EN RCC_MP_APB1ENSETR_UART4EN |
| |
| /******************************************************************************* |
| * STM32MP1 TZC (TZ400) |
| ******************************************************************************/ |
| #define STM32MP1_TZC_BASE U(0x5C006000) |
| |
| #define STM32MP1_TZC_A7_ID U(0) |
| #define STM32MP1_TZC_M4_ID U(1) |
| #define STM32MP1_TZC_LCD_ID U(3) |
| #define STM32MP1_TZC_GPU_ID U(4) |
| #define STM32MP1_TZC_MDMA_ID U(5) |
| #define STM32MP1_TZC_DMA_ID U(6) |
| #define STM32MP1_TZC_USB_HOST_ID U(7) |
| #define STM32MP1_TZC_USB_OTG_ID U(8) |
| #define STM32MP1_TZC_SDMMC_ID U(9) |
| #define STM32MP1_TZC_ETH_ID U(10) |
| #define STM32MP1_TZC_DAP_ID U(15) |
| |
| #define STM32MP1_FILTER_BIT_ALL U(3) |
| |
| /******************************************************************************* |
| * STM32MP1 SDMMC |
| ******************************************************************************/ |
| #define STM32MP_SDMMC1_BASE U(0x58005000) |
| #define STM32MP_SDMMC2_BASE U(0x58007000) |
| #define STM32MP_SDMMC3_BASE U(0x48004000) |
| |
| #define STM32MP_MMC_INIT_FREQ U(400000) /*400 KHz*/ |
| #define STM32MP_SD_NORMAL_SPEED_MAX_FREQ U(25000000) /*25 MHz*/ |
| #define STM32MP_SD_HIGH_SPEED_MAX_FREQ U(50000000) /*50 MHz*/ |
| #define STM32MP_EMMC_NORMAL_SPEED_MAX_FREQ U(26000000) /*26 MHz*/ |
| #define STM32MP_EMMC_HIGH_SPEED_MAX_FREQ U(52000000) /*52 MHz*/ |
| |
| /******************************************************************************* |
| * STM32MP1 BSEC / OTP |
| ******************************************************************************/ |
| #define STM32MP1_OTP_MAX_ID 0x5FU |
| #define STM32MP1_UPPER_OTP_START 0x20U |
| |
| #define OTP_MAX_SIZE (STM32MP1_OTP_MAX_ID + 1U) |
| |
| /* OTP offsets */ |
| #define DATA0_OTP U(0) |
| #define HW2_OTP U(18) |
| |
| /* OTP mask */ |
| /* DATA0 */ |
| #define DATA0_OTP_SECURED BIT(6) |
| |
| /* IWDG OTP */ |
| #define HW2_OTP_IWDG_HW_POS U(3) |
| #define HW2_OTP_IWDG_FZ_STOP_POS U(5) |
| #define HW2_OTP_IWDG_FZ_STANDBY_POS U(7) |
| |
| /* HW2 OTP */ |
| #define HW2_OTP_PRODUCT_BELOW_2V5 BIT(13) |
| |
| /******************************************************************************* |
| * STM32MP1 TAMP |
| ******************************************************************************/ |
| #define TAMP_BASE U(0x5C00A000) |
| #define TAMP_BKP_REGISTER_BASE (TAMP_BASE + U(0x100)) |
| |
| #if !(defined(__LINKER__) || defined(__ASSEMBLER__)) |
| static inline uint32_t tamp_bkpr(uint32_t idx) |
| { |
| return TAMP_BKP_REGISTER_BASE + (idx << 2); |
| } |
| #endif |
| |
| /******************************************************************************* |
| * STM32MP1 DDRCTRL |
| ******************************************************************************/ |
| #define DDRCTRL_BASE U(0x5A003000) |
| |
| /******************************************************************************* |
| * STM32MP1 DDRPHYC |
| ******************************************************************************/ |
| #define DDRPHYC_BASE U(0x5A004000) |
| |
| /******************************************************************************* |
| * STM32MP1 IWDG |
| ******************************************************************************/ |
| #define IWDG_MAX_INSTANCE U(2) |
| #define IWDG1_INST U(0) |
| #define IWDG2_INST U(1) |
| |
| #define IWDG1_BASE U(0x5C003000) |
| #define IWDG2_BASE U(0x5A002000) |
| |
| /******************************************************************************* |
| * STM32MP1 I2C4 |
| ******************************************************************************/ |
| #define I2C4_BASE U(0x5C002000) |
| |
| /******************************************************************************* |
| * STM32MP1 DBGMCU |
| ******************************************************************************/ |
| #define DBGMCU_BASE U(0x50081000) |
| |
| /******************************************************************************* |
| * Device Tree defines |
| ******************************************************************************/ |
| #define DT_IWDG_COMPAT "st,stm32mp1-iwdg" |
| #define DT_PWR_COMPAT "st,stm32mp1-pwr" |
| #define DT_RCC_CLK_COMPAT "st,stm32mp1-rcc" |
| #define DT_SYSCFG_COMPAT "st,stm32mp157-syscfg" |
| |
| #endif /* STM32MP1_DEF_H */ |