blob: 5b95222e6b9332e8f730cc5fec55625519dcc9bc [file] [log] [blame]
#
# Copyright 2018-2020 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
# board-specific build parameters
BOOT_MODE ?= flexspi_nor
BOARD ?= lx2160aqds
POVDD_ENABLE := no
NXP_COINED_BB := no
# DDR Compilation Configs
NUM_OF_DDRC := 1
DDRC_NUM_DIMM := 1
DDRC_NUM_CS := 2
DDR_ECC_EN := yes
#enable address decoding feature
DDR_ADDR_DEC := yes
APPLY_MAX_CDD := yes
# DDR Errata
ERRATA_DDR_A011396 := 1
ERRATA_DDR_A050450 := 1
# On-Board Flash Details
FLASH_TYPE := MT35XU512A
XSPI_FLASH_SZ := 0x10000000
NXP_XSPI_NOR_UNIT_SIZE := 0x20000
BL2_BIN_XSPI_NOR_END_ADDRESS := 0x100000
# CONFIG_FSPI_ERASE_4K is required to erase 4K sector sizes. This
# config is enabled for future use cases.
FSPI_ERASE_4K := 0
# Platform specific features.
WARM_BOOT := yes
# Adding platform specific defines
$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
ifeq (${POVDD_ENABLE},yes)
$(eval $(call add_define,CONFIG_POVDD_ENABLE))
endif
ifneq (${FLASH_TYPE},)
$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
endif
ifneq (${XSPI_FLASH_SZ},)
$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
endif
ifneq (${FSPI_ERASE_4K},)
$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
endif
ifneq (${NUM_OF_DDRC},)
$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
endif
ifneq (${DDRC_NUM_DIMM},)
$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
endif
ifneq (${DDRC_NUM_CS},)
$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
endif
ifeq (${DDR_ADDR_DEC},yes)
$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
endif
ifeq (${DDR_ECC_EN},yes)
$(eval $(call add_define,CONFIG_DDR_ECC_EN))
endif
# Platform can control the base address for non-volatile storage.
#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
ifeq (${WARM_BOOT},yes)
$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
endif
# Adding Platform files build files
BL2_SOURCES += ${BOARD_PATH}/ddr_init.c\
${BOARD_PATH}/platform.c
# Adding SoC build info
include plat/nxp/soc-lx2160a/soc.mk