blob: e21233a1d63f176f724906286771afdc205a515c [file] [log] [blame]
/*
* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#include <platform_def.h>
#include <cortex_a72.h>
.globl plat_crash_console_flush
.globl plat_crash_console_init
.globl plat_crash_console_putc
.globl platform_mem_init
.globl plat_get_my_entrypoint
.globl plat_is_my_cpu_primary
.globl plat_my_core_pos
.globl plat_reset_handler
.globl plat_rpi3_calc_core_pos
.globl plat_secondary_cold_boot_setup
.globl plat_rpi_get_model
/* -----------------------------------------------------
* unsigned int plat_my_core_pos(void)
*
* This function uses the plat_rpi3_calc_core_pos()
* definition to get the index of the calling CPU.
* -----------------------------------------------------
*/
func plat_my_core_pos
mrs x0, mpidr_el1
b plat_rpi3_calc_core_pos
endfunc plat_my_core_pos
/* -----------------------------------------------------
* unsigned int plat_rpi3_calc_core_pos(u_register_t mpidr);
*
* CorePos = (ClusterId * 4) + CoreId
* -----------------------------------------------------
*/
func plat_rpi3_calc_core_pos
and x1, x0, #MPIDR_CPU_MASK
and x0, x0, #MPIDR_CLUSTER_MASK
add x0, x1, x0, LSR #6
ret
endfunc plat_rpi3_calc_core_pos
/* -----------------------------------------------------
* unsigned int plat_is_my_cpu_primary (void);
*
* Find out whether the current cpu is the primary
* cpu.
* -----------------------------------------------------
*/
func plat_is_my_cpu_primary
mrs x0, mpidr_el1
and x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
cmp x0, #RPI_PRIMARY_CPU
cset w0, eq
ret
endfunc plat_is_my_cpu_primary
/* -----------------------------------------------------
* void plat_wait_for_warm_boot (void);
*
* This function performs any platform specific actions
* needed for a CPU to be put into holding pen to wait
* for a warm boot request.
* The function will never return.
* -----------------------------------------------------
*/
func plat_wait_for_warm_boot
/*
* Calculate address of our hold entry.
* As the function will never return, there is no need to save LR.
*/
bl plat_my_core_pos
lsl x0, x0, #3
mov_imm x2, PLAT_RPI3_TM_HOLD_BASE
add x0, x0, x2
/*
* This code runs way before requesting the warmboot of this core,
* so it is possible to clear the mailbox before getting a request
* to boot.
*/
mov x1, PLAT_RPI3_TM_HOLD_STATE_WAIT
str x1,[x0]
/* Wait until we have a go */
poll_mailbox:
wfe
ldr x1, [x0]
cmp x1, PLAT_RPI3_TM_HOLD_STATE_GO
bne poll_mailbox
/* Jump to the provided entrypoint */
mov_imm x0, PLAT_RPI3_TM_ENTRYPOINT
ldr x1, [x0]
br x1
endfunc plat_wait_for_warm_boot
/* -----------------------------------------------------
* void plat_secondary_cold_boot_setup (void);
*
* This function performs any platform specific actions
* needed for a secondary cpu after a cold reset e.g
* mark the cpu's presence, mechanism to place it in a
* holding pen etc.
* -----------------------------------------------------
*/
func plat_secondary_cold_boot_setup
b plat_wait_for_warm_boot
endfunc plat_secondary_cold_boot_setup
/* ---------------------------------------------------------------------
* uintptr_t plat_get_my_entrypoint (void);
*
* Main job of this routine is to distinguish between a cold and a warm
* boot.
*
* This functions returns:
* - 0 for a cold boot.
* - Any other value for a warm boot.
* ---------------------------------------------------------------------
*/
func plat_get_my_entrypoint
mov x1, x30
bl plat_is_my_cpu_primary
/*
* Secondaries always cold boot.
*/
cbz w0, 1f
/*
* Primaries warm boot if they are requested
* to power off.
*/
mov_imm x0, PLAT_RPI3_TM_HOLD_BASE
ldr x0, [x0]
cmp x0, PLAT_RPI3_TM_HOLD_STATE_BSP_OFF
adr x0, plat_wait_for_warm_boot
csel x0, x0, xzr, eq
ret x1
1: mov x0, #0
ret x1
endfunc plat_get_my_entrypoint
/* ---------------------------------------------
* void platform_mem_init (void);
*
* No need to carry out any memory initialization.
* ---------------------------------------------
*/
func platform_mem_init
ret
endfunc platform_mem_init
/* ---------------------------------------------
* int plat_crash_console_init(void)
* Function to initialize the crash console
* without a C Runtime to print crash report.
* Clobber list : x0 - x3
* ---------------------------------------------
*/
func plat_crash_console_init
mov_imm x0, PLAT_RPI_MINI_UART_BASE
mov x1, xzr
mov x2, xzr
b console_16550_core_init
endfunc plat_crash_console_init
/* ---------------------------------------------
* int plat_crash_console_putc(int c)
* Function to print a character on the crash
* console without a C Runtime.
* Clobber list : x1, x2
* ---------------------------------------------
*/
func plat_crash_console_putc
mov_imm x1, PLAT_RPI_MINI_UART_BASE
b console_16550_core_putc
endfunc plat_crash_console_putc
/* ---------------------------------------------
* int plat_crash_console_flush()
* Function to force a write of all buffered
* data that hasn't been output.
* Out : return -1 on error else return 0.
* Clobber list : x0, x1
* ---------------------------------------------
*/
func plat_crash_console_flush
mov_imm x0, PLAT_RPI_MINI_UART_BASE
b console_16550_core_flush
endfunc plat_crash_console_flush
/* ---------------------------------------------
* int plat_rpi_get_model()
* Macro to determine whether we are running on
* a Raspberry Pi 3 or 4. Just checks the MIDR for
* being either a Cortex-A72 or a Cortex-A53.
* Out : return 4 if RPi4, 3 otherwise.
* Clobber list : x0
* ---------------------------------------------
*/
.macro _plat_rpi_get_model
mrs x0, midr_el1
and x0, x0, #0xf0 /* Isolate low byte of part number */
cmp w0, #0x80 /* Cortex-A72 (RPi4) is 0xd08, A53 is 0xd03 */
mov w0, #3
csinc w0, w0, w0, ne
.endm
func plat_rpi_get_model
_plat_rpi_get_model
ret
endfunc plat_rpi_get_model
/* ---------------------------------------------
* void plat_reset_handler(void);
* ---------------------------------------------
*/
func plat_reset_handler
/* L2 cache setup only needed on RPi4 */
_plat_rpi_get_model
cmp w0, #4
b.ne 1f
/* ------------------------------------------------
* Set L2 read/write cache latency:
* - L2 Data RAM latency: 3 cycles (0b010)
* - L2 Data RAM setup: 1 cycle (bit 5)
* ------------------------------------------------
*/
mrs x0, CORTEX_A72_L2CTLR_EL1
mov x1, #0x22
orr x0, x0, x1
msr CORTEX_A72_L2CTLR_EL1, x0
isb
1:
ret
endfunc plat_reset_handler