blob: 356012bf925f5f6aec073dbe7e80c475c2698667 [file] [log] [blame]
/*
* Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef SCMI_H
#define SCMI_H
#include <stddef.h>
#include <stdint.h>
#include <lib/bakery_lock.h>
#include <lib/psci/psci.h>
#include <lib/spinlock.h>
/* Supported SCMI Protocol Versions */
#define SCMI_AP_CORE_PROTO_VER MAKE_SCMI_VERSION(1, 0)
#define SCMI_PWR_DMN_PROTO_VER MAKE_SCMI_VERSION(2, 0)
#define SCMI_SYS_PWR_PROTO_VER MAKE_SCMI_VERSION(1, 0)
#define GET_SCMI_MAJOR_VER(ver) (((ver) >> 16) & 0xffff)
#define GET_SCMI_MINOR_VER(ver) ((ver) & 0xffff)
#define MAKE_SCMI_VERSION(maj, min) \
((((maj) & 0xffff) << 16) | ((min) & 0xffff))
/*
* Check that the driver's version is same or higher than the reported SCMI
* version. We accept lower major version numbers, as all affected protocols
* so far stay backwards compatible. This might need to be revisited in the
* future.
*/
#define is_scmi_version_compatible(drv, scmi) \
((GET_SCMI_MAJOR_VER(drv) > GET_SCMI_MAJOR_VER(scmi)) || \
((GET_SCMI_MAJOR_VER(drv) == GET_SCMI_MAJOR_VER(scmi)) && \
(GET_SCMI_MINOR_VER(drv) <= GET_SCMI_MINOR_VER(scmi))))
/* SCMI Protocol identifiers */
#define SCMI_PWR_DMN_PROTO_ID 0x11
#define SCMI_SYS_PWR_PROTO_ID 0x12
/* The AP core protocol is a CSS platform-specific extension */
#define SCMI_AP_CORE_PROTO_ID 0x90
/* Mandatory messages IDs for all SCMI protocols */
#define SCMI_PROTO_VERSION_MSG 0x0
#define SCMI_PROTO_ATTR_MSG 0x1
#define SCMI_PROTO_MSG_ATTR_MSG 0x2
/* SCMI power domain management protocol message IDs */
#define SCMI_PWR_STATE_SET_MSG 0x4
#define SCMI_PWR_STATE_GET_MSG 0x5
/* SCMI system power management protocol message IDs */
#define SCMI_SYS_PWR_STATE_SET_MSG 0x3
#define SCMI_SYS_PWR_STATE_GET_MSG 0x4
/* SCMI AP core protocol message IDs */
#define SCMI_AP_CORE_RESET_ADDR_SET_MSG 0x3
#define SCMI_AP_CORE_RESET_ADDR_GET_MSG 0x4
/* Helper macros for system power management protocol commands */
/*
* Macros to describe the bit-fields of the `attribute` of system power domain
* protocol PROTOCOL_MSG_ATTRIBUTE message.
*/
#define SYS_PWR_ATTR_WARM_RESET_SHIFT 31
#define SCMI_SYS_PWR_WARM_RESET_SUPPORTED (1U << SYS_PWR_ATTR_WARM_RESET_SHIFT)
#define SYS_PWR_ATTR_SUSPEND_SHIFT 30
#define SCMI_SYS_PWR_SUSPEND_SUPPORTED (1 << SYS_PWR_ATTR_SUSPEND_SHIFT)
/*
* Macros to describe the bit-fields of the `flags` parameter of system power
* domain protocol SYSTEM_POWER_STATE_SET message.
*/
#define SYS_PWR_SET_GRACEFUL_REQ_SHIFT 0
#define SCMI_SYS_PWR_GRACEFUL_REQ (1 << SYS_PWR_SET_GRACEFUL_REQ_SHIFT)
#define SCMI_SYS_PWR_FORCEFUL_REQ (0 << SYS_PWR_SET_GRACEFUL_REQ_SHIFT)
/*
* Macros to describe the `system_state` parameter of system power
* domain protocol SYSTEM_POWER_STATE_SET message.
*/
#define SCMI_SYS_PWR_SHUTDOWN 0x0
#define SCMI_SYS_PWR_COLD_RESET 0x1
#define SCMI_SYS_PWR_WARM_RESET 0x2
#define SCMI_SYS_PWR_POWER_UP 0x3
#define SCMI_SYS_PWR_SUSPEND 0x4
/*
* Macros to describe the bit-fields of the `attribute` of AP core protocol
* AP_CORE_RESET_ADDR set/get messages.
*/
#define SCMI_AP_CORE_LOCK_ATTR_SHIFT 0x0
#define SCMI_AP_CORE_LOCK_ATTR (1U << SCMI_AP_CORE_LOCK_ATTR_SHIFT)
/* SCMI Error code definitions */
#define SCMI_E_QUEUED 1
#define SCMI_E_SUCCESS 0
#define SCMI_E_NOT_SUPPORTED -1
#define SCMI_E_INVALID_PARAM -2
#define SCMI_E_DENIED -3
#define SCMI_E_NOT_FOUND -4
#define SCMI_E_OUT_OF_RANGE -5
#define SCMI_E_BUSY -6
/*
* SCMI driver platform information. The details of the doorbell mechanism
* can be found in the SCMI specification.
*/
typedef struct scmi_channel_plat_info {
/* SCMI mailbox memory */
uintptr_t scmi_mbx_mem;
/* The door bell register address */
uintptr_t db_reg_addr;
/* The bit mask that need to be preserved when ringing doorbell */
uint32_t db_preserve_mask;
/* The bit mask that need to be set to ring doorbell */
uint32_t db_modify_mask;
/* The handler for ringing doorbell */
void (*ring_doorbell)(struct scmi_channel_plat_info *plat_info);
/* cookie is unused now. But added for future enhancements. */
void *cookie;
} scmi_channel_plat_info_t;
#if HW_ASSISTED_COHERENCY
typedef spinlock_t scmi_lock_t;
#else
typedef bakery_lock_t scmi_lock_t;
#endif
/*
* Structure to represent an SCMI channel.
*/
typedef struct scmi_channel {
scmi_channel_plat_info_t *info;
/* The lock for channel access */
scmi_lock_t *lock;
/* Indicate whether the channel is initialized */
int is_initialized;
} scmi_channel_t;
/* External Common API */
void *scmi_init(scmi_channel_t *ch);
int scmi_proto_msg_attr(void *p, uint32_t proto_id, uint32_t command_id,
uint32_t *attr);
int scmi_proto_version(void *p, uint32_t proto_id, uint32_t *version);
/*
* Power domain protocol commands. Refer to the SCMI specification for more
* details on these commands.
*/
int scmi_pwr_state_set(void *p, uint32_t domain_id, uint32_t scmi_pwr_state);
int scmi_pwr_state_get(void *p, uint32_t domain_id, uint32_t *scmi_pwr_state);
/*
* System power management protocol commands. Refer SCMI specification for more
* details on these commands.
*/
int scmi_sys_pwr_state_set(void *p, uint32_t flags, uint32_t system_state);
int scmi_sys_pwr_state_get(void *p, uint32_t *system_state);
/* SCMI AP core configuration protocol commands. */
int scmi_ap_core_set_reset_addr(void *p, uint64_t reset_addr, uint32_t attr);
int scmi_ap_core_get_reset_addr(void *p, uint64_t *reset_addr, uint32_t *attr);
/* API to get the platform specific SCMI channel information. */
scmi_channel_plat_info_t *plat_css_get_scmi_info(unsigned int channel_id);
/* API to override default PSCI callbacks for platforms that support SCMI. */
const plat_psci_ops_t *css_scmi_override_pm_ops(plat_psci_ops_t *ops);
#endif /* SCMI_H */