blob: ce55d7f3134061f0581f824f284976c855010e80 [file] [log] [blame]
/*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <stdbool.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <context.h>
#include <drivers/arm/tzc380.h>
#include <drivers/console.h>
#include <drivers/generic_delay_timer.h>
#include <lib/el3_runtime/context_mgmt.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables.h>
#include <plat/common/platform.h>
#include <gpc.h>
#include <imx_aipstz.h>
#include <imx_uart.h>
#include <plat_imx8.h>
static const mmap_region_t imx_mmap[] = {
MAP_REGION_FLAT(GPV_BASE, GPV_SIZE, MT_DEVICE | MT_RW), /* GPV map */
MAP_REGION_FLAT(IMX_ROM_BASE, IMX_ROM_SIZE, MT_MEMORY | MT_RO), /* ROM map */
MAP_REGION_FLAT(IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW), /* AIPS map */
MAP_REGION_FLAT(IMX_GIC_BASE, IMX_GIC_SIZE, MT_DEVICE | MT_RW), /* GIC map */
{0},
};
static const struct aipstz_cfg aipstz[] = {
{AIPSTZ1_BASE, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
{AIPSTZ2_BASE, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
{AIPSTZ3_BASE, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
{AIPSTZ4_BASE, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
{0},
};
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
static uint32_t imx_soc_revision;
int imx_soc_info_handler(uint32_t smc_fid, u_register_t x1, u_register_t x2,
u_register_t x3)
{
return imx_soc_revision;
}
#define ANAMIX_DIGPROG 0x6c
#define ROM_SOC_INFO_A0 0x800
#define ROM_SOC_INFO_B0 0x83C
#define OCOTP_SOC_INFO_B1 0x40
static void imx8mq_soc_info_init(void)
{
uint32_t rom_version;
uint32_t ocotp_val;
imx_soc_revision = mmio_read_32(IMX_ANAMIX_BASE + ANAMIX_DIGPROG);
rom_version = mmio_read_8(IMX_ROM_BASE + ROM_SOC_INFO_A0);
if (rom_version == 0x10)
return;
rom_version = mmio_read_8(IMX_ROM_BASE + ROM_SOC_INFO_B0);
if (rom_version == 0x20) {
imx_soc_revision &= ~0xff;
imx_soc_revision |= rom_version;
return;
}
/* 0xff0055aa is magic number for B1 */
ocotp_val = mmio_read_32(IMX_OCOTP_BASE + OCOTP_SOC_INFO_B1);
if (ocotp_val == 0xff0055aa) {
imx_soc_revision &= ~0xff;
imx_soc_revision |= 0x21;
return;
}
}
/* get SPSR for BL33 entry */
static uint32_t get_spsr_for_bl33_entry(void)
{
unsigned long el_status;
unsigned long mode;
uint32_t spsr;
/* figure out what mode we enter the non-secure world */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
mode = (el_status) ? MODE_EL2 : MODE_EL1;
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
static void bl31_tz380_setup(void)
{
unsigned int val;
val = mmio_read_32(IMX_IOMUX_GPR_BASE + IOMUXC_GPR10);
if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
return;
tzc380_init(IMX_TZASC_BASE);
/*
* Need to substact offset 0x40000000 from CPU address when
* programming tzasc region for i.mx8mq. Enable 1G-5G S/NS RW
*/
tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) |
TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
int i;
/* enable CSU NS access permission */
for (i = 0; i < 64; i++) {
mmio_write_32(IMX_CSU_BASE + i * 4, 0xffffffff);
}
imx_aipstz_init(aipstz);
/* config CAAM JRaMID set MID to Cortex A */
mmio_write_32(CAAM_JR0MID, CAAM_NS_MID);
mmio_write_32(CAAM_JR1MID, CAAM_NS_MID);
mmio_write_32(CAAM_JR2MID, CAAM_NS_MID);
#if DEBUG_CONSOLE
static console_uart_t console;
console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
#endif
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.
*/
bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
bl31_tz380_setup();
}
void bl31_plat_arch_setup(void)
{
mmap_add_region(BL31_BASE, BL31_BASE, (BL31_LIMIT - BL31_BASE),
MT_MEMORY | MT_RW | MT_SECURE);
mmap_add_region(BL_CODE_BASE, BL_CODE_BASE, (BL_CODE_END - BL_CODE_BASE),
MT_MEMORY | MT_RO | MT_SECURE);
mmap_add(imx_mmap);
#if USE_COHERENT_MEM
mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
MT_DEVICE | MT_RW | MT_SECURE);
#endif
/* setup xlat table */
init_xlat_tables();
/* enable the MMU */
enable_mmu_el3(0);
}
void bl31_platform_setup(void)
{
generic_delay_timer_init();
/* init the GICv3 cpu and distributor interface */
plat_gic_driver_init();
plat_gic_init();
/* determine SOC revision for erratas */
imx8mq_soc_info_init();
/* gpc init */
imx_gpc_init();
}
entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
{
if (type == NON_SECURE)
return &bl33_image_ep_info;
if (type == SECURE)
return &bl32_image_ep_info;
return NULL;
}
unsigned int plat_get_syscnt_freq2(void)
{
return COUNTER_FREQUENCY;
}
void bl31_plat_runtime_setup(void)
{
return;
}