blob: 6809541a6392148ee786826b5e8bc38208d1c7de [file] [log] [blame]
/*
* Copyright (c) 2018-2022, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/debug.h>
#include <drivers/arm/css/css_mhu_doorbell.h>
#include <drivers/arm/css/scmi.h>
#include <drivers/arm/css/sds.h>
#include <drivers/arm/gic600_multichip.h>
#include <lib/mmio.h>
#include <lib/utils.h>
#include <plat/arm/common/plat_arm.h>
#include "n1sdp_def.h"
#include <platform_def.h>
/*
* Platform information structure stored in SDS.
* This structure holds information about platform's DDR
* size which will be used to zero out the memory before
* enabling the ECC capability as well as information
* about multichip setup
* - multichip mode
* - secondary_count
* - Local DDR size in GB, DDR memory in master board
* - Remote DDR size in GB, DDR memory in secondary board
*/
struct n1sdp_plat_info {
bool multichip_mode;
uint8_t secondary_count;
uint8_t local_ddr_size;
uint8_t remote_ddr_size;
} __packed;
static scmi_channel_plat_info_t n1sdp_scmi_plat_info = {
.scmi_mbx_mem = N1SDP_SCMI_PAYLOAD_BASE,
.db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhu_ring_doorbell
};
static struct gic600_multichip_data n1sdp_multichip_data __init = {
.rt_owner_base = PLAT_ARM_GICD_BASE,
.rt_owner = 0,
.chip_count = 1,
.chip_addrs = {
PLAT_ARM_GICD_BASE >> 16,
PLAT_ARM_GICD_BASE >> 16
},
.spi_ids = {
{PLAT_ARM_GICD_BASE, 32, 479},
{PLAT_ARM_GICD_BASE, 512, 959}
}
};
static uintptr_t n1sdp_multichip_gicr_frames[3] = {
PLAT_ARM_GICR_BASE,
PLAT_ARM_GICR_BASE + PLAT_ARM_REMOTE_CHIP_OFFSET,
0
};
scmi_channel_plat_info_t *plat_css_get_scmi_info(unsigned int channel_id)
{
return &n1sdp_scmi_plat_info;
}
const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops)
{
return css_scmi_override_pm_ops(ops);
}
/*
* N1SDP platform supports RDIMMs with ECC capability. To use the ECC
* capability, the entire DDR memory space has to be zeroed out before
* enabling the ECC bits in DMC620. Zeroing out several gigabytes of
* memory from SCP is quite time consuming so the following function
* is added to zero out the DDR memory from application processor which is
* much faster compared to SCP. Local DDR memory is zeroed out during BL2
* stage. If remote chip is connected, it's DDR memory is zeroed out here.
*/
void remote_dmc_ecc_setup(uint8_t remote_ddr_size)
{
uint64_t remote_dram2_size;
remote_dram2_size = (remote_ddr_size * 1024UL * 1024UL * 1024UL) -
N1SDP_REMOTE_DRAM1_SIZE;
/* multichip setup */
INFO("Zeroing remote DDR memories\n");
zero_normalmem((void *)N1SDP_REMOTE_DRAM1_BASE,
N1SDP_REMOTE_DRAM1_SIZE);
flush_dcache_range(N1SDP_REMOTE_DRAM1_BASE, N1SDP_REMOTE_DRAM1_SIZE);
zero_normalmem((void *)N1SDP_REMOTE_DRAM2_BASE, remote_dram2_size);
flush_dcache_range(N1SDP_REMOTE_DRAM2_BASE, remote_dram2_size);
INFO("Enabling ECC on remote DMCs\n");
/* Set DMCs to CONFIG state before writing ERR0CTLR0 register */
mmio_write_32(N1SDP_REMOTE_DMC0_MEMC_CMD_REG,
N1SDP_DMC_MEMC_CMD_CONFIG);
mmio_write_32(N1SDP_REMOTE_DMC1_MEMC_CMD_REG,
N1SDP_DMC_MEMC_CMD_CONFIG);
/* Enable ECC in DMCs */
mmio_setbits_32(N1SDP_REMOTE_DMC0_ERR0CTLR0_REG,
N1SDP_DMC_ERR0CTLR0_ECC_EN);
mmio_setbits_32(N1SDP_REMOTE_DMC1_ERR0CTLR0_REG,
N1SDP_DMC_ERR0CTLR0_ECC_EN);
/* Set DMCs to READY state */
mmio_write_32(N1SDP_REMOTE_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
mmio_write_32(N1SDP_REMOTE_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
}
void n1sdp_bl31_multichip_setup(void)
{
plat_arm_override_gicr_frames(n1sdp_multichip_gicr_frames);
gic600_multichip_init(&n1sdp_multichip_data);
}
void bl31_platform_setup(void)
{
int ret;
struct n1sdp_plat_info plat_info;
ret = sds_init();
if (ret != SDS_OK) {
ERROR("SDS initialization failed\n");
panic();
}
ret = sds_struct_read(N1SDP_SDS_PLATFORM_INFO_STRUCT_ID,
N1SDP_SDS_PLATFORM_INFO_OFFSET,
&plat_info,
N1SDP_SDS_PLATFORM_INFO_SIZE,
SDS_ACCESS_MODE_NON_CACHED);
if (ret != SDS_OK) {
ERROR("Error getting platform info from SDS\n");
panic();
}
/* Validate plat_info SDS */
if ((plat_info.local_ddr_size == 0)
|| (plat_info.local_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
|| (plat_info.remote_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
|| (plat_info.secondary_count > N1SDP_MAX_SECONDARY_COUNT)) {
ERROR("platform info SDS is corrupted\n");
panic();
}
if (plat_info.multichip_mode) {
n1sdp_multichip_data.chip_count = plat_info.secondary_count + 1;
n1sdp_bl31_multichip_setup();
}
arm_bl31_platform_setup();
/* Check if remote memory is present */
if ((plat_info.multichip_mode) && (plat_info.remote_ddr_size != 0))
remote_dmc_ecc_setup(plat_info.remote_ddr_size);
}
#if defined(SPD_spmd)
/*
* A dummy implementation of the platform handler for Group0 secure interrupt.
*/
int plat_spmd_handle_group0_interrupt(uint32_t intid)
{
(void)intid;
return -1;
}
#endif /*defined(SPD_spmd)*/