| /* |
| * Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| /* Define a simple and generic interface to access eMMC and SD-card devices. */ |
| |
| #include <assert.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <drivers/delay_timer.h> |
| #include <drivers/mmc.h> |
| #include <lib/utils.h> |
| #include <plat/common/common_def.h> |
| |
| #define MMC_DEFAULT_MAX_RETRIES 5 |
| #define SEND_OP_COND_MAX_RETRIES 100 |
| |
| #define MULT_BY_512K_SHIFT 19 |
| |
| static const struct mmc_ops *ops; |
| static unsigned int mmc_ocr_value; |
| static struct mmc_csd_emmc mmc_csd; |
| static struct sd_switch_status sd_switch_func_status; |
| static unsigned char mmc_ext_csd[512] __aligned(16); |
| static unsigned int mmc_flags; |
| static struct mmc_device_info *mmc_dev_info; |
| static unsigned int rca; |
| static unsigned int scr[2]__aligned(16) = { 0 }; |
| |
| static const unsigned char tran_speed_base[16] = { |
| 0, 10, 12, 13, 15, 20, 26, 30, 35, 40, 45, 52, 55, 60, 70, 80 |
| }; |
| |
| static const unsigned char sd_tran_speed_base[16] = { |
| 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 |
| }; |
| |
| static bool is_cmd23_enabled(void) |
| { |
| return ((mmc_flags & MMC_FLAG_CMD23) != 0U); |
| } |
| |
| static bool is_sd_cmd6_enabled(void) |
| { |
| return ((mmc_flags & MMC_FLAG_SD_CMD6) != 0U); |
| } |
| |
| static int mmc_send_cmd(unsigned int idx, unsigned int arg, |
| unsigned int r_type, unsigned int *r_data) |
| { |
| struct mmc_cmd cmd; |
| int ret; |
| |
| zeromem(&cmd, sizeof(struct mmc_cmd)); |
| |
| cmd.cmd_idx = idx; |
| cmd.cmd_arg = arg; |
| cmd.resp_type = r_type; |
| |
| ret = ops->send_cmd(&cmd); |
| |
| if ((ret == 0) && (r_data != NULL)) { |
| int i; |
| |
| for (i = 0; i < 4; i++) { |
| r_data[i] = cmd.resp_data[i]; |
| } |
| } |
| |
| if (ret != 0) { |
| VERBOSE("Send command %u error: %d\n", idx, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int mmc_device_state(void) |
| { |
| int retries = MMC_DEFAULT_MAX_RETRIES; |
| unsigned int resp_data[4]; |
| |
| do { |
| int ret; |
| |
| if (retries == 0) { |
| ERROR("CMD13 failed after %d retries\n", |
| MMC_DEFAULT_MAX_RETRIES); |
| return -EIO; |
| } |
| |
| ret = mmc_send_cmd(MMC_CMD(13), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R1, &resp_data[0]); |
| if (ret != 0) { |
| retries--; |
| continue; |
| } |
| |
| if ((resp_data[0] & STATUS_SWITCH_ERROR) != 0U) { |
| return -EIO; |
| } |
| |
| retries--; |
| } while ((resp_data[0] & STATUS_READY_FOR_DATA) == 0U); |
| |
| return MMC_GET_STATE(resp_data[0]); |
| } |
| |
| static int mmc_send_part_switch_cmd(unsigned char part_config) |
| { |
| int ret; |
| unsigned int part_time = 0; |
| |
| ret = mmc_send_cmd(MMC_CMD(6), |
| EXTCSD_WRITE_BYTES | |
| EXTCSD_CMD(CMD_EXTCSD_PARTITION_CONFIG) | |
| EXTCSD_VALUE(part_config) | |
| EXTCSD_CMD_SET_NORMAL, |
| MMC_RESPONSE_R1B, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* Partition switch timing is in 10ms units */ |
| part_time = mmc_ext_csd[CMD_EXTCSD_PART_SWITCH_TIME] * 10; |
| |
| mdelay(part_time); |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return ret; |
| } |
| } while (ret == MMC_STATE_PRG); |
| |
| return 0; |
| } |
| |
| static int mmc_set_ext_csd(unsigned int ext_cmd, unsigned int value) |
| { |
| int ret; |
| |
| ret = mmc_send_cmd(MMC_CMD(6), |
| EXTCSD_WRITE_BYTES | EXTCSD_CMD(ext_cmd) | |
| EXTCSD_VALUE(value) | EXTCSD_CMD_SET_NORMAL, |
| MMC_RESPONSE_R1B, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return ret; |
| } |
| } while (ret == MMC_STATE_PRG); |
| |
| return 0; |
| } |
| |
| static int mmc_sd_switch(unsigned int bus_width) |
| { |
| int ret; |
| int retries = MMC_DEFAULT_MAX_RETRIES; |
| unsigned int bus_width_arg = 0; |
| |
| ret = ops->prepare(0, (uintptr_t)&scr, sizeof(scr)); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* CMD55: Application Specific Command */ |
| ret = mmc_send_cmd(MMC_CMD(55), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R5, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* ACMD51: SEND_SCR */ |
| do { |
| ret = mmc_send_cmd(MMC_ACMD(51), 0, MMC_RESPONSE_R1, NULL); |
| if ((ret != 0) && (retries == 0)) { |
| ERROR("ACMD51 failed after %d retries (ret=%d)\n", |
| MMC_DEFAULT_MAX_RETRIES, ret); |
| return ret; |
| } |
| |
| retries--; |
| } while (ret != 0); |
| |
| ret = ops->read(0, (uintptr_t)&scr, sizeof(scr)); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (((scr[0] & SD_SCR_BUS_WIDTH_4) != 0U) && |
| (bus_width == MMC_BUS_WIDTH_4)) { |
| bus_width_arg = 2; |
| } |
| |
| /* CMD55: Application Specific Command */ |
| ret = mmc_send_cmd(MMC_CMD(55), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R5, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* ACMD6: SET_BUS_WIDTH */ |
| ret = mmc_send_cmd(MMC_ACMD(6), bus_width_arg, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return ret; |
| } |
| } while (ret == MMC_STATE_PRG); |
| |
| return 0; |
| } |
| |
| static int mmc_set_ios(unsigned int clk, unsigned int bus_width) |
| { |
| int ret; |
| unsigned int width = bus_width; |
| |
| if (mmc_dev_info->mmc_dev_type != MMC_IS_EMMC) { |
| if (width == MMC_BUS_WIDTH_8) { |
| WARN("Wrong bus config for SD-card, force to 4\n"); |
| width = MMC_BUS_WIDTH_4; |
| } |
| ret = mmc_sd_switch(width); |
| if (ret != 0) { |
| return ret; |
| } |
| } else if (mmc_csd.spec_vers == 4U) { |
| ret = mmc_set_ext_csd(CMD_EXTCSD_BUS_WIDTH, |
| (unsigned int)width); |
| if (ret != 0) { |
| return ret; |
| } |
| } else { |
| VERBOSE("Wrong MMC type or spec version\n"); |
| } |
| |
| return ops->set_ios(clk, width); |
| } |
| |
| static int mmc_fill_device_info(void) |
| { |
| unsigned long long c_size; |
| unsigned int speed_idx; |
| unsigned int nb_blocks; |
| unsigned int freq_unit; |
| int ret = 0; |
| struct mmc_csd_sd_v2 *csd_sd_v2; |
| |
| switch (mmc_dev_info->mmc_dev_type) { |
| case MMC_IS_EMMC: |
| mmc_dev_info->block_size = MMC_BLOCK_SIZE; |
| |
| ret = ops->prepare(0, (uintptr_t)&mmc_ext_csd, |
| sizeof(mmc_ext_csd)); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* MMC CMD8: SEND_EXT_CSD */ |
| ret = mmc_send_cmd(MMC_CMD(8), 0, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = ops->read(0, (uintptr_t)&mmc_ext_csd, |
| sizeof(mmc_ext_csd)); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return ret; |
| } |
| } while (ret != MMC_STATE_TRAN); |
| |
| nb_blocks = (mmc_ext_csd[CMD_EXTCSD_SEC_CNT] << 0) | |
| (mmc_ext_csd[CMD_EXTCSD_SEC_CNT + 1] << 8) | |
| (mmc_ext_csd[CMD_EXTCSD_SEC_CNT + 2] << 16) | |
| (mmc_ext_csd[CMD_EXTCSD_SEC_CNT + 3] << 24); |
| |
| mmc_dev_info->device_size = (unsigned long long)nb_blocks * |
| mmc_dev_info->block_size; |
| |
| break; |
| |
| case MMC_IS_SD: |
| /* |
| * Use the same mmc_csd struct, as required fields here |
| * (READ_BL_LEN, C_SIZE, CSIZE_MULT) are common with eMMC. |
| */ |
| mmc_dev_info->block_size = BIT_32(mmc_csd.read_bl_len); |
| |
| c_size = ((unsigned long long)mmc_csd.c_size_high << 2U) | |
| (unsigned long long)mmc_csd.c_size_low; |
| assert(c_size != 0xFFFU); |
| |
| mmc_dev_info->device_size = (c_size + 1U) * |
| BIT_64(mmc_csd.c_size_mult + 2U) * |
| mmc_dev_info->block_size; |
| |
| break; |
| |
| case MMC_IS_SD_HC: |
| assert(mmc_csd.csd_structure == 1U); |
| |
| mmc_dev_info->block_size = MMC_BLOCK_SIZE; |
| |
| /* Need to use mmc_csd_sd_v2 struct */ |
| csd_sd_v2 = (struct mmc_csd_sd_v2 *)&mmc_csd; |
| c_size = ((unsigned long long)csd_sd_v2->c_size_high << 16) | |
| (unsigned long long)csd_sd_v2->c_size_low; |
| |
| mmc_dev_info->device_size = (c_size + 1U) << MULT_BY_512K_SHIFT; |
| |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret < 0) { |
| return ret; |
| } |
| |
| speed_idx = (mmc_csd.tran_speed & CSD_TRAN_SPEED_MULT_MASK) >> |
| CSD_TRAN_SPEED_MULT_SHIFT; |
| |
| assert(speed_idx > 0U); |
| |
| if (mmc_dev_info->mmc_dev_type == MMC_IS_EMMC) { |
| mmc_dev_info->max_bus_freq = tran_speed_base[speed_idx]; |
| } else { |
| mmc_dev_info->max_bus_freq = sd_tran_speed_base[speed_idx]; |
| } |
| |
| freq_unit = mmc_csd.tran_speed & CSD_TRAN_SPEED_UNIT_MASK; |
| while (freq_unit != 0U) { |
| mmc_dev_info->max_bus_freq *= 10U; |
| --freq_unit; |
| } |
| |
| mmc_dev_info->max_bus_freq *= 10000U; |
| |
| return 0; |
| } |
| |
| static int sd_switch(unsigned int mode, unsigned char group, |
| unsigned char func) |
| { |
| unsigned int group_shift = (group - 1U) * 4U; |
| unsigned int group_mask = GENMASK(group_shift + 3U, group_shift); |
| unsigned int arg; |
| int ret; |
| |
| ret = ops->prepare(0, (uintptr_t)&sd_switch_func_status, |
| sizeof(sd_switch_func_status)); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* MMC CMD6: SWITCH_FUNC */ |
| arg = mode | SD_SWITCH_ALL_GROUPS_MASK; |
| arg &= ~group_mask; |
| arg |= func << group_shift; |
| ret = mmc_send_cmd(MMC_CMD(6), arg, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| return ops->read(0, (uintptr_t)&sd_switch_func_status, |
| sizeof(sd_switch_func_status)); |
| } |
| |
| static int sd_send_op_cond(void) |
| { |
| int n; |
| unsigned int resp_data[4]; |
| |
| for (n = 0; n < SEND_OP_COND_MAX_RETRIES; n++) { |
| int ret; |
| |
| /* CMD55: Application Specific Command */ |
| ret = mmc_send_cmd(MMC_CMD(55), 0, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* ACMD41: SD_SEND_OP_COND */ |
| ret = mmc_send_cmd(MMC_ACMD(41), OCR_HCS | |
| mmc_dev_info->ocr_voltage, MMC_RESPONSE_R3, |
| &resp_data[0]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((resp_data[0] & OCR_POWERUP) != 0U) { |
| mmc_ocr_value = resp_data[0]; |
| |
| if ((mmc_ocr_value & OCR_HCS) != 0U) { |
| mmc_dev_info->mmc_dev_type = MMC_IS_SD_HC; |
| } else { |
| mmc_dev_info->mmc_dev_type = MMC_IS_SD; |
| } |
| |
| return 0; |
| } |
| |
| mdelay(10); |
| } |
| |
| ERROR("ACMD41 failed after %d retries\n", SEND_OP_COND_MAX_RETRIES); |
| |
| return -EIO; |
| } |
| |
| static int mmc_reset_to_idle(void) |
| { |
| int ret; |
| |
| /* CMD0: reset to IDLE */ |
| ret = mmc_send_cmd(MMC_CMD(0), 0, 0, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| mdelay(2); |
| |
| return 0; |
| } |
| |
| static int mmc_send_op_cond(void) |
| { |
| int ret, n; |
| unsigned int resp_data[4]; |
| |
| for (n = 0; n < SEND_OP_COND_MAX_RETRIES; n++) { |
| ret = mmc_send_cmd(MMC_CMD(1), OCR_SECTOR_MODE | |
| OCR_VDD_MIN_2V7 | OCR_VDD_MIN_1V7, |
| MMC_RESPONSE_R3, &resp_data[0]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((resp_data[0] & OCR_POWERUP) != 0U) { |
| mmc_ocr_value = resp_data[0]; |
| return 0; |
| } |
| |
| mdelay(10); |
| } |
| |
| ERROR("CMD1 failed after %d retries\n", SEND_OP_COND_MAX_RETRIES); |
| |
| return -EIO; |
| } |
| |
| static int mmc_enumerate(unsigned int clk, unsigned int bus_width) |
| { |
| int ret; |
| unsigned int resp_data[4]; |
| |
| ops->init(); |
| |
| ret = mmc_reset_to_idle(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (mmc_dev_info->mmc_dev_type == MMC_IS_EMMC) { |
| ret = mmc_send_op_cond(); |
| } else { |
| /* CMD8: Send Interface Condition Command */ |
| ret = mmc_send_cmd(MMC_CMD(8), VHS_2_7_3_6_V | CMD8_CHECK_PATTERN, |
| MMC_RESPONSE_R5, &resp_data[0]); |
| |
| if ((ret == 0) && ((resp_data[0] & 0xffU) == CMD8_CHECK_PATTERN)) { |
| ret = sd_send_op_cond(); |
| } |
| } |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* CMD2: Card Identification */ |
| ret = mmc_send_cmd(MMC_CMD(2), 0, MMC_RESPONSE_R2, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* CMD3: Set Relative Address */ |
| if (mmc_dev_info->mmc_dev_type == MMC_IS_EMMC) { |
| rca = MMC_FIX_RCA; |
| ret = mmc_send_cmd(MMC_CMD(3), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| } else { |
| ret = mmc_send_cmd(MMC_CMD(3), 0, |
| MMC_RESPONSE_R6, &resp_data[0]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| rca = (resp_data[0] & 0xFFFF0000U) >> 16; |
| } |
| |
| /* CMD9: CSD Register */ |
| ret = mmc_send_cmd(MMC_CMD(9), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R2, &resp_data[0]); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| memcpy(&mmc_csd, &resp_data, sizeof(resp_data)); |
| |
| /* CMD7: Select Card */ |
| ret = mmc_send_cmd(MMC_CMD(7), rca << RCA_SHIFT_OFFSET, |
| MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return ret; |
| } |
| } while (ret != MMC_STATE_TRAN); |
| |
| ret = mmc_set_ios(clk, bus_width); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| ret = mmc_fill_device_info(); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if (is_sd_cmd6_enabled() && |
| (mmc_dev_info->mmc_dev_type == MMC_IS_SD_HC)) { |
| /* Try to switch to High Speed Mode */ |
| ret = sd_switch(SD_SWITCH_FUNC_CHECK, 1U, 1U); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((sd_switch_func_status.support_g1 & BIT(9)) == 0U) { |
| /* High speed not supported, keep default speed */ |
| return 0; |
| } |
| |
| ret = sd_switch(SD_SWITCH_FUNC_SWITCH, 1U, 1U); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| if ((sd_switch_func_status.sel_g2_g1 & 0x1U) == 0U) { |
| /* Cannot switch to high speed, keep default speed */ |
| return 0; |
| } |
| |
| mmc_dev_info->max_bus_freq = 50000000U; |
| ret = ops->set_ios(clk, bus_width); |
| } |
| |
| return ret; |
| } |
| |
| size_t mmc_read_blocks(int lba, uintptr_t buf, size_t size) |
| { |
| int ret; |
| unsigned int cmd_idx, cmd_arg; |
| |
| assert((ops != NULL) && |
| (ops->read != NULL) && |
| (size != 0U) && |
| ((size & MMC_BLOCK_MASK) == 0U)); |
| |
| ret = ops->prepare(lba, buf, size); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| if (is_cmd23_enabled()) { |
| /* Set block count */ |
| ret = mmc_send_cmd(MMC_CMD(23), size / MMC_BLOCK_SIZE, |
| MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| cmd_idx = MMC_CMD(18); |
| } else { |
| if (size > MMC_BLOCK_SIZE) { |
| cmd_idx = MMC_CMD(18); |
| } else { |
| cmd_idx = MMC_CMD(17); |
| } |
| } |
| |
| if (((mmc_ocr_value & OCR_ACCESS_MODE_MASK) == OCR_BYTE_MODE) && |
| (mmc_dev_info->mmc_dev_type != MMC_IS_SD_HC)) { |
| cmd_arg = lba * MMC_BLOCK_SIZE; |
| } else { |
| cmd_arg = lba; |
| } |
| |
| ret = mmc_send_cmd(cmd_idx, cmd_arg, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| ret = ops->read(lba, buf, size); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| /* Wait buffer empty */ |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return 0; |
| } |
| } while ((ret != MMC_STATE_TRAN) && (ret != MMC_STATE_DATA)); |
| |
| if (!is_cmd23_enabled() && (size > MMC_BLOCK_SIZE)) { |
| ret = mmc_send_cmd(MMC_CMD(12), 0, MMC_RESPONSE_R1B, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| } |
| |
| return size; |
| } |
| |
| size_t mmc_write_blocks(int lba, const uintptr_t buf, size_t size) |
| { |
| int ret; |
| unsigned int cmd_idx, cmd_arg; |
| |
| assert((ops != NULL) && |
| (ops->write != NULL) && |
| (size != 0U) && |
| ((buf & MMC_BLOCK_MASK) == 0U) && |
| ((size & MMC_BLOCK_MASK) == 0U)); |
| |
| ret = ops->prepare(lba, buf, size); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| if (is_cmd23_enabled()) { |
| /* Set block count */ |
| ret = mmc_send_cmd(MMC_CMD(23), size / MMC_BLOCK_SIZE, |
| MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| cmd_idx = MMC_CMD(25); |
| } else { |
| if (size > MMC_BLOCK_SIZE) { |
| cmd_idx = MMC_CMD(25); |
| } else { |
| cmd_idx = MMC_CMD(24); |
| } |
| } |
| |
| if ((mmc_ocr_value & OCR_ACCESS_MODE_MASK) == OCR_BYTE_MODE) { |
| cmd_arg = lba * MMC_BLOCK_SIZE; |
| } else { |
| cmd_arg = lba; |
| } |
| |
| ret = mmc_send_cmd(cmd_idx, cmd_arg, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| ret = ops->write(lba, buf, size); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| /* Wait buffer empty */ |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return 0; |
| } |
| } while ((ret != MMC_STATE_TRAN) && (ret != MMC_STATE_RCV)); |
| |
| if (!is_cmd23_enabled() && (size > MMC_BLOCK_SIZE)) { |
| ret = mmc_send_cmd(MMC_CMD(12), 0, MMC_RESPONSE_R1B, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| } |
| |
| return size; |
| } |
| |
| size_t mmc_erase_blocks(int lba, size_t size) |
| { |
| int ret; |
| |
| assert(ops != NULL); |
| assert((size != 0U) && ((size & MMC_BLOCK_MASK) == 0U)); |
| |
| ret = mmc_send_cmd(MMC_CMD(35), lba, MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| ret = mmc_send_cmd(MMC_CMD(36), lba + (size / MMC_BLOCK_SIZE) - 1U, |
| MMC_RESPONSE_R1, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| ret = mmc_send_cmd(MMC_CMD(38), lba, MMC_RESPONSE_R1B, NULL); |
| if (ret != 0) { |
| return 0; |
| } |
| |
| do { |
| ret = mmc_device_state(); |
| if (ret < 0) { |
| return 0; |
| } |
| } while (ret != MMC_STATE_TRAN); |
| |
| return size; |
| } |
| |
| static int mmc_part_switch(unsigned char part_type) |
| { |
| unsigned char part_config = mmc_ext_csd[CMD_EXTCSD_PARTITION_CONFIG]; |
| |
| part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; |
| part_config |= part_type; |
| |
| return mmc_send_part_switch_cmd(part_config); |
| } |
| |
| static unsigned char mmc_current_boot_part(void) |
| { |
| return PART_CFG_CURRENT_BOOT_PARTITION(mmc_ext_csd[CMD_EXTCSD_PARTITION_CONFIG]); |
| } |
| |
| int mmc_part_switch_current_boot(void) |
| { |
| unsigned char current_boot_part = mmc_current_boot_part(); |
| int ret; |
| |
| if ((current_boot_part != 1U) && (current_boot_part != 2U)) { |
| ERROR("Got unexpected value for active boot partition, %u\n", current_boot_part); |
| return -EIO; |
| } |
| |
| ret = mmc_part_switch(current_boot_part); |
| if (ret < 0) { |
| ERROR("Failed to switch to boot partition, %d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| int mmc_part_switch_user(void) |
| { |
| int ret; |
| |
| ret = mmc_part_switch(PART_CFG_BOOT_PARTITION_NO_ACCESS); |
| if (ret < 0) { |
| ERROR("Failed to switch to user partition, %d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| size_t mmc_boot_part_size(void) |
| { |
| return mmc_ext_csd[CMD_EXTCSD_BOOT_SIZE_MULT] * SZ_128K; |
| } |
| |
| size_t mmc_boot_part_read_blocks(int lba, uintptr_t buf, size_t size) |
| { |
| size_t size_read; |
| int ret; |
| |
| ret = mmc_part_switch_current_boot(); |
| if (ret < 0) { |
| return 0; |
| } |
| |
| size_read = mmc_read_blocks(lba, buf, size); |
| |
| ret = mmc_part_switch_user(); |
| if (ret < 0) { |
| return 0; |
| } |
| |
| return size_read; |
| } |
| |
| int mmc_init(const struct mmc_ops *ops_ptr, unsigned int clk, |
| unsigned int width, unsigned int flags, |
| struct mmc_device_info *device_info) |
| { |
| assert((ops_ptr != NULL) && |
| (ops_ptr->init != NULL) && |
| (ops_ptr->send_cmd != NULL) && |
| (ops_ptr->set_ios != NULL) && |
| (ops_ptr->prepare != NULL) && |
| (ops_ptr->read != NULL) && |
| (ops_ptr->write != NULL) && |
| (device_info != NULL) && |
| (clk != 0) && |
| ((width == MMC_BUS_WIDTH_1) || |
| (width == MMC_BUS_WIDTH_4) || |
| (width == MMC_BUS_WIDTH_8) || |
| (width == MMC_BUS_WIDTH_DDR_4) || |
| (width == MMC_BUS_WIDTH_DDR_8))); |
| |
| ops = ops_ptr; |
| mmc_flags = flags; |
| mmc_dev_info = device_info; |
| |
| return mmc_enumerate(clk, width); |
| } |