include/common/asm_macros.S - filogic/atf - Gitiles

 /*
  * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * Redistributions of source code must retain the above copyright notice, this
  * list of conditions and the following disclaimer.
  *
  * Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * Neither the name of ARM nor the names of its contributors may be used
  * to endorse or promote products derived from this software without specific
  * prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
 #ifndef __ASM_MACROS_S__
 #define __ASM_MACROS_S__

 #include <arch.h>


 	.macro	func_prologue
 	stp	x29, x30, [sp, #-0x10]!
 	mov	x29,sp
 	.endm

 	.macro	func_epilogue
 	ldp	x29, x30, [sp], #0x10
 	.endm


 	.macro	dcache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	ubfx	\tmp, \tmp, #16, #4
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	icache_line_size  reg, tmp
 	mrs	\tmp, ctr_el0
 	and	\tmp, \tmp, #0xf
 	mov	\reg, #4
 	lsl	\reg, \reg, \tmp
 	.endm


 	.macro	smc_check  label
 	mrs	x0, esr_el3
 	ubfx	x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
 	cmp	x0, #EC_AARCH64_SMC
 	b.ne	$label
 	.endm


 	/*
 	 * This macro verifies that the a given vector doesn't exceed the
 	 * architectural limit of 32 instructions. This is meant to be placed
 	 * immedately after the last instruction in the vector. It takes the
 	 * vector entry as the parameter
 	 */
 	.macro check_vector_size since
 	  .if (. - \since) > (32 * 4)
 	    .error "Vector exceeds 32 instructions"
 	  .endif
 	.endm

 	/*
 	 * This macro is used to create a function label and place the
 	 * code into a separate text section based on the function name
 	 * to enable elimination of unused code during linking
 	 */
 	.macro func _name
 	.section .text.\_name, "ax"
 	.type \_name, %function
 	.func \_name
 	\_name:
 	.endm

 	/*
 	 * This macro is used to mark the end of a function.
 	 */
 	.macro endfunc _name
 	.endfunc
 	.size \_name, . - \_name
 	.endm

 	/* ---------------------------------------------
 	 * Find the type of reset and jump to handler
 	 * if present. If the handler is null then it is
 	 * a cold boot. The primary cpu will set up the
 	 * platform while the secondaries wait for
 	 * their turn to be woken up
 	 * ---------------------------------------------
 	 */
 	.macro wait_for_entrypoint
 wait_for_entrypoint:
 	mrs	x0, mpidr_el1
 	bl	platform_get_entrypoint
 	cbnz	x0, do_warm_boot
 	mrs	x0, mpidr_el1
 	bl	platform_is_primary_cpu
 	cbnz	x0, do_cold_boot

 	/* ---------------------------------------------
 	 * Perform any platform specific secondary cpu
 	 * actions
 	 * ---------------------------------------------
 	 */
 	bl	plat_secondary_cold_boot_setup
 	b	wait_for_entrypoint

 	do_warm_boot:
 	/* ---------------------------------------------
 	 * Jump to BL31 for all warm boot init.
 	 * ---------------------------------------------
 	 */
 	blr	x0

 	do_cold_boot:
 	.endm

 	/*
 	 * This macro declares an array of 1 or more stacks, properly
 	 * aligned and in the requested section
 	 */
 #define STACK_ALIGN	6

 	.macro declare_stack _name, _section, _size, _count
 	.if ((\_size & ((1 << STACK_ALIGN) - 1)) <> 0)
 	  .error "Stack size not correctly aligned"
 	.endif
 	.section    \_section, "aw", %nobits
 	.align STACK_ALIGN
 	\_name:
 	.space ((\_count) * (\_size)), 0
 	.endm

 	/*
 	 * This macro calculates the base address of an MP stack using the
 	 * platform_get_core_pos() index, the name of the stack storage and
 	 * the size of each stack
 	 * In: X0 = MPIDR of CPU whose stack is wanted
 	 * Out: X0 = physical address of stack base
 	 * Clobber: X30, X1, X2
 	 */
 	.macro get_mp_stack _name, _size
 	bl  platform_get_core_pos
 	ldr x2, =(\_name + \_size)
 	mov x1, #\_size
 	madd x0, x0, x1, x2
 	.endm

 	/*
 	 * This macro calculates the base address of a UP stack using the
 	 * name of the stack storage and the size of the stack
 	 * Out: X0 = physical address of stack base
 	 */
 	.macro get_up_stack _name, _size
 	ldr x0, =(\_name + \_size)
 	.endm

 	/*
 	 * Helper macro to generate the best mov/movk combinations according
 	 * the value to be moved. The 16 bits from '_shift' are tested and
 	 * if not zero, they are moved into '_reg' without affecting
 	 * other bits.
 	 */
 	.macro _mov_imm16 _reg, _val, _shift
 		.if (\_val >> \_shift) & 0xffff
 			.if (\_val & (1 << \_shift - 1))
 				movk	\_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
 			.else
 				mov	\_reg, \_val & (0xffff << \_shift)
 			.endif
 		.endif
 	.endm

 	/*
 	 * Helper macro to load arbitrary values into 32 or 64-bit registers
 	 * which generates the best mov/movk combinations. Many base addresses
 	 * are 64KB aligned the macro will eliminate updating bits 15:0 in
 	 * that case
 	 */
 	.macro mov_imm _reg, _val
 		.if (\_val) == 0
 			mov	\_reg, #0
 		.else
 			_mov_imm16	\_reg, (\_val), 0
 			_mov_imm16	\_reg, (\_val), 16
 			_mov_imm16	\_reg, (\_val), 32
 			_mov_imm16	\_reg, (\_val), 48
 		.endif
 	.endm

 #endif /* __ASM_MACROS_S__ */
	/*
	* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* Neither the name of ARM nor the names of its contributors may be used
	* to endorse or promote products derived from this software without specific
	* prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/
	#ifndef __ASM_MACROS_S__
	#define __ASM_MACROS_S__

	#include <arch.h>


	.macro func_prologue
	stp x29, x30, [sp, #-0x10]!
	mov x29,sp
	.endm

	.macro func_epilogue
	ldp x29, x30, [sp], #0x10
	.endm


	.macro dcache_line_size reg, tmp
	mrs \tmp, ctr_el0
	ubfx \tmp, \tmp, #16, #4
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro icache_line_size reg, tmp
	mrs \tmp, ctr_el0
	and \tmp, \tmp, #0xf
	mov \reg, #4
	lsl \reg, \reg, \tmp
	.endm


	.macro smc_check label
	mrs x0, esr_el3
	ubfx x0, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
	cmp x0, #EC_AARCH64_SMC
	b.ne $label
	.endm


	/*
	* This macro verifies that the a given vector doesn't exceed the
	* architectural limit of 32 instructions. This is meant to be placed
	* immedately after the last instruction in the vector. It takes the
	* vector entry as the parameter
	*/
	.macro check_vector_size since
	.if (. - \since) > (32 * 4)
	.error "Vector exceeds 32 instructions"
	.endif
	.endm

	/*
	* This macro is used to create a function label and place the
	* code into a separate text section based on the function name
	* to enable elimination of unused code during linking
	*/
	.macro func _name
	.section .text.\_name, "ax"
	.type \_name, %function
	.func \_name
	\_name:
	.endm

	/*
	* This macro is used to mark the end of a function.
	*/
	.macro endfunc _name
	.endfunc
	.size \_name, . - \_name
	.endm

	/* ---------------------------------------------
	* Find the type of reset and jump to handler
	* if present. If the handler is null then it is
	* a cold boot. The primary cpu will set up the
	* platform while the secondaries wait for
	* their turn to be woken up
	* ---------------------------------------------
	*/
	.macro wait_for_entrypoint
	wait_for_entrypoint:
	mrs x0, mpidr_el1
	bl platform_get_entrypoint
	cbnz x0, do_warm_boot
	mrs x0, mpidr_el1
	bl platform_is_primary_cpu
	cbnz x0, do_cold_boot

	/* ---------------------------------------------
	* Perform any platform specific secondary cpu
	* actions
	* ---------------------------------------------
	*/
	bl plat_secondary_cold_boot_setup
	b wait_for_entrypoint

	do_warm_boot:
	/* ---------------------------------------------
	* Jump to BL31 for all warm boot init.
	* ---------------------------------------------
	*/
	blr x0

	do_cold_boot:
	.endm

	/*
	* This macro declares an array of 1 or more stacks, properly
	* aligned and in the requested section
	*/
	#define STACK_ALIGN 6

	.macro declare_stack _name, _section, _size, _count
	.if ((\_size & ((1 << STACK_ALIGN) - 1)) <> 0)
	.error "Stack size not correctly aligned"
	.endif
	.section \_section, "aw", %nobits
	.align STACK_ALIGN
	\_name:
	.space ((\_count) * (\_size)), 0
	.endm

	/*
	* This macro calculates the base address of an MP stack using the
	* platform_get_core_pos() index, the name of the stack storage and
	* the size of each stack
	* In: X0 = MPIDR of CPU whose stack is wanted
	* Out: X0 = physical address of stack base
	* Clobber: X30, X1, X2
	*/
	.macro get_mp_stack _name, _size
	bl platform_get_core_pos
	ldr x2, =(\_name + \_size)
	mov x1, #\_size
	madd x0, x0, x1, x2
	.endm

	/*
	* This macro calculates the base address of a UP stack using the
	* name of the stack storage and the size of the stack
	* Out: X0 = physical address of stack base
	*/
	.macro get_up_stack _name, _size
	ldr x0, =(\_name + \_size)
	.endm

	/*
	* Helper macro to generate the best mov/movk combinations according
	* the value to be moved. The 16 bits from '_shift' are tested and
	* if not zero, they are moved into '_reg' without affecting
	* other bits.
	*/
	.macro _mov_imm16 _reg, _val, _shift
	.if (\_val >> \_shift) & 0xffff
	.if (\_val & (1 << \_shift - 1))
	movk \_reg, (\_val >> \_shift) & 0xffff, LSL \_shift
	.else
	mov \_reg, \_val & (0xffff << \_shift)
	.endif
	.endif
	.endm

	/*
	* Helper macro to load arbitrary values into 32 or 64-bit registers
	* which generates the best mov/movk combinations. Many base addresses
	* are 64KB aligned the macro will eliminate updating bits 15:0 in
	* that case
	*/
	.macro mov_imm _reg, _val
	.if (\_val) == 0
	mov \_reg, #0
	.else
	_mov_imm16 \_reg, (\_val), 0
	_mov_imm16 \_reg, (\_val), 16
	_mov_imm16 \_reg, (\_val), 32
	_mov_imm16 \_reg, (\_val), 48
	.endif
	.endm

	#endif /* __ASM_MACROS_S__ */