[][Add initial mtk feed for OpenWRT v21.02]
[Description]
Add initial mtk feed for OpenWRT v21.02
[Release-log]
N/A
Change-Id: I8051c6ba87f1ccf26c02fdd88a17d66f63c0b101
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/4495320
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c
new file mode 100755
index 0000000..7253042
--- /dev/null
+++ b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c
@@ -0,0 +1,1058 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Zhanguo Ju <zhanguo.ju@mediatek.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/hrtimer.h>
+
+#include "mt753x.h"
+#include "mt753x_regs.h"
+
+/* MT7531 registers */
+#define SGMII_REG_BASE 0x5000
+#define SGMII_REG_PORT_BASE 0x1000
+#define SGMII_REG(p, r) (SGMII_REG_BASE + \
+ (p) * SGMII_REG_PORT_BASE + (r))
+#define PCS_CONTROL_1(p) SGMII_REG(p, 0x00)
+#define SGMII_MODE(p) SGMII_REG(p, 0x20)
+#define QPHY_PWR_STATE_CTRL(p) SGMII_REG(p, 0xe8)
+#define ANA_CKBG(p) SGMII_REG(p, 0x100)
+#define ANA_DA_FORCE_MODE1(p) SGMII_REG(p, 0x110)
+#define PHYA_CTRL_SIGNAL3(p) SGMII_REG(p, 0x128)
+#define PHYA_ANA_SYSPLL(p) SGMII_REG(p, 0x158)
+
+/* Fields of PCS_CONTROL_1 */
+#define SGMII_LINK_STATUS BIT(18)
+#define SGMII_AN_ENABLE BIT(12)
+#define SGMII_AN_RESTART BIT(9)
+
+/* Fields of SGMII_MODE */
+#define SGMII_REMOTE_FAULT_DIS BIT(8)
+#define SGMII_IF_MODE_FORCE_DUPLEX BIT(4)
+#define SGMII_IF_MODE_FORCE_SPEED_S 0x2
+#define SGMII_IF_MODE_FORCE_SPEED_M 0x0c
+#define SGMII_IF_MODE_ADVERT_AN BIT(1)
+
+/* Values of SGMII_IF_MODE_FORCE_SPEED */
+#define SGMII_IF_MODE_FORCE_SPEED_10 0
+#define SGMII_IF_MODE_FORCE_SPEED_100 1
+#define SGMII_IF_MODE_FORCE_SPEED_1000 2
+
+/* Fields of QPHY_PWR_STATE_CTRL */
+#define PHYA_PWD BIT(4)
+
+/* Fields of ANA_CKBG */
+#define SSUSB_PLL_SSC_EN BIT(21)
+
+/* Fields of ANA_DA_FORCE_MODE1 */
+#define FORCE_PLL_SSC_EN BIT(30)
+
+/* Fields of PHYA_CTRL_SIGNAL3 */
+#define RG_TPHY_SPEED_S 2
+#define RG_TPHY_SPEED_M 0x0c
+
+/* Values of RG_TPHY_SPEED */
+#define RG_TPHY_SPEED_1000 0
+#define RG_TPHY_SPEED_2500 1
+
+/* Fields of PHYA_ANA_SYSPLL */
+#define RG_VUSB10_ON BIT(29)
+
+/* Unique fields of (M)HWSTRAP for MT7531 */
+#define XTAL_FSEL_S 7
+#define XTAL_FSEL_M BIT(7)
+#define PHY_EN BIT(6)
+#define CHG_STRAP BIT(8)
+
+/* Efuse Register Define */
+#define GBE_EFUSE 0x7bc8
+#define GBE_SEL_EFUSE_EN BIT(0)
+
+/* PHY ENABLE Register bitmap define */
+#define PHY_DEV1F 0x1f
+#define PHY_DEV1F_REG_44 0x44
+#define PHY_DEV1F_REG_104 0x104
+#define PHY_DEV1F_REG_10A 0x10a
+#define PHY_DEV1F_REG_10B 0x10b
+#define PHY_DEV1F_REG_10C 0x10c
+#define PHY_DEV1F_REG_10D 0x10d
+#define PHY_DEV1F_REG_268 0x268
+#define PHY_DEV1F_REG_269 0x269
+#define PHY_DEV1F_REG_26A 0x26A
+#define PHY_DEV1F_REG_403 0x403
+
+/* Fields of PHY_DEV1F_REG_403 */
+#define GBE_EFUSE_SETTING BIT(3)
+#define PHY_EN_BYPASS_MODE BIT(4)
+#define POWER_ON_OFF BIT(5)
+#define PHY_PLL_M GENMASK(9, 8)
+#define PHY_PLL_SEL(x) (((x) << 8) & GENMASK(9, 8))
+
+/* PHY EEE Register bitmap of define */
+#define PHY_DEV07 0x07
+#define PHY_DEV07_REG_03C 0x3c
+
+/* PHY Extend Register 0x14 bitmap of define */
+#define PHY_EXT_REG_14 0x14
+
+/* Fields of PHY_EXT_REG_14 */
+#define PHY_EN_DOWN_SHFIT BIT(4)
+
+/* PHY Extend Register 0x17 bitmap of define */
+#define PHY_EXT_REG_17 0x17
+
+/* Fields of PHY_EXT_REG_17 */
+#define PHY_LINKDOWN_POWER_SAVING_EN BIT(4)
+
+/* PHY PMA Register 0x17 bitmap of define */
+#define SLV_DSP_READY_TIME_S 15
+#define SLV_DSP_READY_TIME_M (0xff << SLV_DSP_READY_TIME_S)
+
+/* PHY PMA Register 0x18 bitmap of define */
+#define ENABLE_RANDOM_UPDATE_TRIGGER BIT(8)
+
+/* PHY DEV 0x1e Register bitmap of define */
+#define PHY_DEV1E 0x1e
+#define PHY_TX_MLT3_BASE 0x0
+#define PHY_DEV1E_REG_13 0x13
+#define PHY_DEV1E_REG_14 0x14
+#define PHY_DEV1E_REG_41 0x41
+#define PHY_DEV1E_REG_A6 0xa6
+#define PHY_DEV1E_REG_0C6 0x0c6
+#define PHY_DEV1E_REG_0FE 0x0fe
+#define PHY_DEV1E_REG_123 0x123
+#define PHY_DEV1E_REG_141 0x141
+#define PHY_DEV1E_REG_189 0x189
+#define PHY_DEV1E_REG_234 0x234
+
+/* Fields of PHY_DEV1E_REG_0C6 */
+#define PHY_POWER_SAVING_S 8
+#define PHY_POWER_SAVING_M 0x300
+#define PHY_POWER_SAVING_TX 0x0
+
+/* Fields of PHY_DEV1E_REG_189 */
+#define DESCRAMBLER_CLEAR_EN 0x1
+
+/* Fields of PHY_DEV1E_REG_234 */
+#define TR_OPEN_LOOP_EN BIT(0)
+
+/* Port debug count register */
+#define DBG_CNT_BASE 0x3018
+#define DBG_CNT_PORT_BASE 0x100
+#define DBG_CNT(p) (DBG_CNT_BASE + \
+ (p) * DBG_CNT_PORT_BASE)
+#define DIS_CLR BIT(31)
+
+/* Values of XTAL_FSEL_S */
+#define XTAL_40MHZ 0
+#define XTAL_25MHZ 1
+
+#define PLLGP_EN 0x7820
+#define EN_COREPLL BIT(2)
+#define SW_CLKSW BIT(1)
+#define SW_PLLGP BIT(0)
+
+#define PLLGP_CR0 0x78a8
+#define RG_COREPLL_EN BIT(22)
+#define RG_COREPLL_POSDIV_S 23
+#define RG_COREPLL_POSDIV_M 0x3800000
+#define RG_COREPLL_SDM_PCW_S 1
+#define RG_COREPLL_SDM_PCW_M 0x3ffffe
+#define RG_COREPLL_SDM_PCW_CHG BIT(0)
+
+/* TOP Signals Status Register */
+#define TOP_SIG_SR 0x780c
+#define PAD_MCM_SMI_EN BIT(0)
+#define PAD_DUAL_SGMII_EN BIT(1)
+
+/* RGMII and SGMII PLL clock */
+#define ANA_PLLGP_CR2 0x78b0
+#define ANA_PLLGP_CR5 0x78bc
+
+/* GPIO mode define */
+#define GPIO_MODE_REGS(x) (0x7c0c + (((x) / 8) * 4))
+#define GPIO_MODE_S 4
+
+/* GPIO GROUP IOLB SMT0 Control */
+#define SMT0_IOLB 0x7f04
+#define SMT_IOLB_5_SMI_MDC_EN BIT(5)
+
+/* Unique fields of PMCR for MT7531 */
+#define FORCE_MODE_EEE1G BIT(25)
+#define FORCE_MODE_EEE100 BIT(26)
+#define FORCE_MODE_TX_FC BIT(27)
+#define FORCE_MODE_RX_FC BIT(28)
+#define FORCE_MODE_DPX BIT(29)
+#define FORCE_MODE_SPD BIT(30)
+#define FORCE_MODE_LNK BIT(31)
+#define FORCE_MODE BIT(15)
+
+#define CHIP_REV 0x781C
+#define CHIP_NAME_S 16
+#define CHIP_NAME_M 0xffff0000
+#define CHIP_REV_S 0
+#define CHIP_REV_M 0x0f
+#define CHIP_REV_E1 0x0
+
+#define CLKGEN_CTRL 0x7500
+#define CLK_SKEW_OUT_S 8
+#define CLK_SKEW_OUT_M 0x300
+#define CLK_SKEW_IN_S 6
+#define CLK_SKEW_IN_M 0xc0
+#define RXCLK_NO_DELAY BIT(5)
+#define TXCLK_NO_REVERSE BIT(4)
+#define GP_MODE_S 1
+#define GP_MODE_M 0x06
+#define GP_CLK_EN BIT(0)
+
+#define CPGC_CTRL 0xB0
+#define COL_EN BIT(0)
+#define COL_CLK_EN BIT(1)
+#define COL_RST_N BIT(2)
+#define COL_BUSY BIT(3)
+
+/* Values of GP_MODE */
+#define GP_MODE_RGMII 0
+#define GP_MODE_MII 1
+#define GP_MODE_REV_MII 2
+
+/* Values of CLK_SKEW_IN */
+#define CLK_SKEW_IN_NO_CHANGE 0
+#define CLK_SKEW_IN_DELAY_100PPS 1
+#define CLK_SKEW_IN_DELAY_200PPS 2
+#define CLK_SKEW_IN_REVERSE 3
+
+/* Values of CLK_SKEW_OUT */
+#define CLK_SKEW_OUT_NO_CHANGE 0
+#define CLK_SKEW_OUT_DELAY_100PPS 1
+#define CLK_SKEW_OUT_DELAY_200PPS 2
+#define CLK_SKEW_OUT_REVERSE 3
+
+/* Proprietory Control Register of Internal Phy device 0x1e */
+#define RXADC_CONTROL_3 0xc2
+#define RXADC_LDO_CONTROL_2 0xd3
+
+/* Proprietory Control Register of Internal Phy device 0x1f */
+#define TXVLD_DA_271 0x271
+#define TXVLD_DA_272 0x272
+#define TXVLD_DA_273 0x273
+
+/* gpio pinmux pins and functions define */
+static int gpio_int_pins[] = {0};
+static int gpio_int_funcs[] = {1};
+static int gpio_mdc_pins[] = {11, 20};
+static int gpio_mdc_funcs[] = {2, 2};
+static int gpio_mdio_pins[] = {12, 21};
+static int gpio_mdio_funcs[] = {2, 2};
+
+static int mt7531_set_port_sgmii_force_mode(struct gsw_mt753x *gsw, u32 port,
+ struct mt753x_port_cfg *port_cfg)
+{
+ u32 speed, port_base, val;
+ ktime_t timeout;
+ u32 timeout_us;
+
+ if (port < 5 || port >= MT753X_NUM_PORTS) {
+ dev_info(gsw->dev, "port %d is not a SGMII port\n", port);
+ return -EINVAL;
+ }
+
+ port_base = port - 5;
+
+ switch (port_cfg->speed) {
+ case MAC_SPD_1000:
+ speed = RG_TPHY_SPEED_1000;
+ break;
+ case MAC_SPD_2500:
+ speed = RG_TPHY_SPEED_2500;
+ break;
+ default:
+ dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n",
+ port_cfg->speed, port);
+
+ speed = RG_TPHY_SPEED_1000;
+ }
+
+ /* Step 1: Speed select register setting */
+ val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base));
+ val &= ~RG_TPHY_SPEED_M;
+ val |= speed << RG_TPHY_SPEED_S;
+ mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val);
+
+ /* Step 2 : Disable AN */
+ val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
+ val &= ~SGMII_AN_ENABLE;
+ mt753x_reg_write(gsw, PCS_CONTROL_1(port_base), val);
+
+ /* Step 3: SGMII force mode setting */
+ val = mt753x_reg_read(gsw, SGMII_MODE(port_base));
+ val &= ~SGMII_IF_MODE_ADVERT_AN;
+ val &= ~SGMII_IF_MODE_FORCE_SPEED_M;
+ val |= SGMII_IF_MODE_FORCE_SPEED_1000 << SGMII_IF_MODE_FORCE_SPEED_S;
+ val |= SGMII_IF_MODE_FORCE_DUPLEX;
+ /* For sgmii force mode, 0 is full duplex and 1 is half duplex */
+ if (port_cfg->duplex)
+ val &= ~SGMII_IF_MODE_FORCE_DUPLEX;
+
+ mt753x_reg_write(gsw, SGMII_MODE(port_base), val);
+
+ /* Step 4: XXX: Disable Link partner's AN and set force mode */
+
+ /* Step 5: XXX: Special setting for PHYA ==> reserved for flexible */
+
+ /* Step 6 : Release PHYA power down state */
+ val = mt753x_reg_read(gsw, QPHY_PWR_STATE_CTRL(port_base));
+ val &= ~PHYA_PWD;
+ mt753x_reg_write(gsw, QPHY_PWR_STATE_CTRL(port_base), val);
+
+ /* Step 7 : Polling SGMII_LINK_STATUS */
+ timeout_us = 2000000;
+ timeout = ktime_add_us(ktime_get(), timeout_us);
+ while (1) {
+ val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
+ val &= SGMII_LINK_STATUS;
+
+ if (val)
+ break;
+
+ if (ktime_compare(ktime_get(), timeout) > 0)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int mt7531_set_port_sgmii_an_mode(struct gsw_mt753x *gsw, u32 port,
+ struct mt753x_port_cfg *port_cfg)
+{
+ u32 speed, port_base, val;
+ ktime_t timeout;
+ u32 timeout_us;
+
+ if (port < 5 || port >= MT753X_NUM_PORTS) {
+ dev_info(gsw->dev, "port %d is not a SGMII port\n", port);
+ return -EINVAL;
+ }
+
+ port_base = port - 5;
+
+ switch (port_cfg->speed) {
+ case MAC_SPD_1000:
+ speed = RG_TPHY_SPEED_1000;
+ break;
+ case MAC_SPD_2500:
+ speed = RG_TPHY_SPEED_2500;
+ break;
+ default:
+ dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n",
+ port_cfg->speed, port);
+
+ speed = RG_TPHY_SPEED_1000;
+ }
+
+ /* Step 1: Speed select register setting */
+ val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base));
+ val &= ~RG_TPHY_SPEED_M;
+ val |= speed << RG_TPHY_SPEED_S;
+ mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val);
+
+ /* Step 2: Remote fault disable */
+ val = mt753x_reg_read(gsw, SGMII_MODE(port));
+ val |= SGMII_REMOTE_FAULT_DIS;
+ mt753x_reg_write(gsw, SGMII_MODE(port), val);
+
+ /* Step 3: Setting Link partner's AN enable = 1 */
+
+ /* Step 4: Setting Link partner's device ability for speed/duplex */
+
+ /* Step 5: AN re-start */
+ val = mt753x_reg_read(gsw, PCS_CONTROL_1(port));
+ val |= SGMII_AN_RESTART;
+ mt753x_reg_write(gsw, PCS_CONTROL_1(port), val);
+
+ /* Step 6: Special setting for PHYA ==> reserved for flexible */
+
+ /* Step 7 : Polling SGMII_LINK_STATUS */
+ timeout_us = 2000000;
+ timeout = ktime_add_us(ktime_get(), timeout_us);
+ while (1) {
+ val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
+ val &= SGMII_LINK_STATUS;
+
+ if (val)
+ break;
+
+ if (ktime_compare(ktime_get(), timeout) > 0)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void mt7531_sgmii_ssc(struct gsw_mt753x *gsw, u32 port, int enable)
+{
+ u32 val;
+ u32 port_base = port - 5;
+
+ if (enable) {
+ val = mt753x_reg_read(gsw, ANA_CKBG(port_base));
+ val |= SSUSB_PLL_SSC_EN;
+ mt753x_reg_write(gsw, ANA_CKBG(port_base), val);
+
+ val = mt753x_reg_read(gsw, ANA_DA_FORCE_MODE1(port_base));
+ val |= FORCE_PLL_SSC_EN;
+ mt753x_reg_write(gsw, ANA_DA_FORCE_MODE1(port_base), val);
+ } else {
+ val = mt753x_reg_read(gsw, ANA_CKBG(port_base));
+ val &= ~SSUSB_PLL_SSC_EN;
+ mt753x_reg_write(gsw, ANA_CKBG(port_base), val);
+
+ val = mt753x_reg_read(gsw, ANA_DA_FORCE_MODE1(port_base));
+ val &= ~FORCE_PLL_SSC_EN;
+ mt753x_reg_write(gsw, ANA_DA_FORCE_MODE1(port_base), val);
+ }
+}
+
+static int mt7531_set_port_rgmii(struct gsw_mt753x *gsw, u32 port)
+{
+ u32 val;
+
+ if (port != 5) {
+ dev_info(gsw->dev, "RGMII mode is not available for port %d\n",
+ port);
+ return -EINVAL;
+ }
+
+ val = mt753x_reg_read(gsw, CLKGEN_CTRL);
+ val |= GP_CLK_EN;
+ val &= ~GP_MODE_M;
+ val |= GP_MODE_RGMII << GP_MODE_S;
+ val |= TXCLK_NO_REVERSE;
+ val |= RXCLK_NO_DELAY;
+ val &= ~CLK_SKEW_IN_M;
+ val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S;
+ val &= ~CLK_SKEW_OUT_M;
+ val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S;
+ mt753x_reg_write(gsw, CLKGEN_CTRL, val);
+
+ return 0;
+}
+
+static int mt7531_mac_port_setup(struct gsw_mt753x *gsw, u32 port,
+ struct mt753x_port_cfg *port_cfg)
+{
+ u32 pmcr;
+ u32 speed;
+
+ if (port < 5 || port >= MT753X_NUM_PORTS) {
+ dev_info(gsw->dev, "port %d is not a MAC port\n", port);
+ return -EINVAL;
+ }
+
+ if (port_cfg->enabled) {
+ pmcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
+ MAC_MODE | MAC_TX_EN | MAC_RX_EN |
+ BKOFF_EN | BACKPR_EN;
+
+ if (port_cfg->force_link) {
+ /* PMCR's speed field 0x11 is reserved,
+ * sw should set 0x10
+ */
+ speed = port_cfg->speed;
+ if (port_cfg->speed == MAC_SPD_2500)
+ speed = MAC_SPD_1000;
+
+ pmcr |= FORCE_MODE_LNK | FORCE_LINK |
+ FORCE_MODE_SPD | FORCE_MODE_DPX |
+ FORCE_MODE_RX_FC | FORCE_MODE_TX_FC |
+ FORCE_RX_FC | FORCE_TX_FC |
+ (speed << FORCE_SPD_S);
+
+ if (port_cfg->duplex)
+ pmcr |= FORCE_DPX;
+ }
+ } else {
+ pmcr = FORCE_MODE_LNK;
+ }
+
+ switch (port_cfg->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ mt7531_set_port_rgmii(gsw, port);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ if (port_cfg->force_link)
+ mt7531_set_port_sgmii_force_mode(gsw, port, port_cfg);
+ else
+ mt7531_set_port_sgmii_an_mode(gsw, port, port_cfg);
+
+ mt7531_sgmii_ssc(gsw, port, port_cfg->ssc_on);
+ break;
+ default:
+ if (port_cfg->enabled)
+ dev_info(gsw->dev, "%s is not supported by port %d\n",
+ phy_modes(port_cfg->phy_mode), port);
+
+ pmcr = FORCE_MODE_LNK;
+ }
+
+ mt753x_reg_write(gsw, PMCR(port), pmcr);
+
+ return 0;
+}
+
+static void mt7531_core_pll_setup(struct gsw_mt753x *gsw)
+{
+ u32 val;
+ u32 top_sig;
+ u32 hwstrap;
+ u32 xtal;
+
+ val = mt753x_reg_read(gsw, CHIP_REV);
+ top_sig = mt753x_reg_read(gsw, TOP_SIG_SR);
+ hwstrap = mt753x_reg_read(gsw, HWSTRAP);
+ if ((val & CHIP_REV_M) > 0)
+ xtal = (top_sig & PAD_MCM_SMI_EN) ? XTAL_40MHZ : XTAL_25MHZ;
+ else
+ xtal = (hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S;
+
+ /* dump HW strap and XTAL */
+ dev_info(gsw->dev, "HWSTRAP=0x%x XTAL=%dMHz\n", hwstrap,
+ (xtal == XTAL_25MHZ) ? 25 : 40);
+
+ /* Only BE needs additional setting */
+ if (top_sig & PAD_DUAL_SGMII_EN)
+ return;
+
+ /* Disable Port5 SGMII clearly */
+ val = mt753x_reg_read(gsw, PHYA_ANA_SYSPLL(0));
+ val &= ~RG_VUSB10_ON;
+ mt753x_reg_write(gsw, PHYA_ANA_SYSPLL(0), val);
+
+ switch (xtal) {
+ case XTAL_25MHZ:
+ /* Step 1 : Disable MT7531 COREPLL */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val &= ~EN_COREPLL;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ /* Step 2: switch to XTAL output */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= SW_CLKSW;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_EN;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Step 3: disable PLLGP and enable program PLLGP */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= SW_PLLGP;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ /* Step 4: program COREPLL output frequency to 500MHz */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_POSDIV_M;
+ val |= 2 << RG_COREPLL_POSDIV_S;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+ usleep_range(25, 35);
+
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Set feedback divide ratio update signal to high */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val |= RG_COREPLL_SDM_PCW_CHG;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+ /* Wait for at least 16 XTAL clocks */
+ usleep_range(10, 20);
+
+ /* Step 5: set feedback divide ratio update signal to low */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_CHG;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Enable 325M clock for SGMII */
+ mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000);
+
+ /* Enable 250SSC clock for RGMII */
+ mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000);
+
+ /* Step 6: Enable MT7531 PLL */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val |= RG_COREPLL_EN;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= EN_COREPLL;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+ usleep_range(25, 35);
+
+ break;
+ case XTAL_40MHZ:
+ /* Step 1 : Disable MT7531 COREPLL */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val &= ~EN_COREPLL;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ /* Step 2: switch to XTAL output */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= SW_CLKSW;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_EN;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Step 3: disable PLLGP and enable program PLLGP */
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= SW_PLLGP;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+
+ /* Step 4: program COREPLL output frequency to 500MHz */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_POSDIV_M;
+ val |= 2 << RG_COREPLL_POSDIV_S;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+ usleep_range(25, 35);
+
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_M;
+ val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Set feedback divide ratio update signal to high */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val |= RG_COREPLL_SDM_PCW_CHG;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+ /* Wait for at least 16 XTAL clocks */
+ usleep_range(10, 20);
+
+ /* Step 5: set feedback divide ratio update signal to low */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val &= ~RG_COREPLL_SDM_PCW_CHG;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ /* Enable 325M clock for SGMII */
+ mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000);
+
+ /* Enable 250SSC clock for RGMII */
+ mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000);
+
+ /* Step 6: Enable MT7531 PLL */
+ val = mt753x_reg_read(gsw, PLLGP_CR0);
+ val |= RG_COREPLL_EN;
+ mt753x_reg_write(gsw, PLLGP_CR0, val);
+
+ val = mt753x_reg_read(gsw, PLLGP_EN);
+ val |= EN_COREPLL;
+ mt753x_reg_write(gsw, PLLGP_EN, val);
+ usleep_range(25, 35);
+ break;
+ }
+}
+
+static int mt7531_internal_phy_calibration(struct gsw_mt753x *gsw)
+{
+ return 0;
+}
+
+static int mt7531_sw_detect(struct gsw_mt753x *gsw, struct chip_rev *crev)
+{
+ u32 rev, topsig;
+
+ rev = mt753x_reg_read(gsw, CHIP_REV);
+
+ if (((rev & CHIP_NAME_M) >> CHIP_NAME_S) == MT7531) {
+ if (crev) {
+ topsig = mt753x_reg_read(gsw, TOP_SIG_SR);
+
+ crev->rev = rev & CHIP_REV_M;
+ crev->name = topsig & PAD_DUAL_SGMII_EN ?
+ "MT7531AE" : "MT7531BE";
+ }
+
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static void pinmux_set_mux_7531(struct gsw_mt753x *gsw, u32 pin, u32 mode)
+{
+ u32 val;
+
+ val = mt753x_reg_read(gsw, GPIO_MODE_REGS(pin));
+ val &= ~(0xf << (pin & 7) * GPIO_MODE_S);
+ val |= mode << (pin & 7) * GPIO_MODE_S;
+ mt753x_reg_write(gsw, GPIO_MODE_REGS(pin), val);
+}
+
+static int mt7531_set_gpio_pinmux(struct gsw_mt753x *gsw)
+{
+ u32 group = 0;
+ struct device_node *np = gsw->dev->of_node;
+
+ /* Set GPIO 0 interrupt mode */
+ pinmux_set_mux_7531(gsw, gpio_int_pins[0], gpio_int_funcs[0]);
+
+ of_property_read_u32(np, "mediatek,mdio_master_pinmux", &group);
+
+ /* group = 0: do nothing, 1: 1st group (AE), 2: 2nd group (BE) */
+ if (group > 0 && group <= 2) {
+ group--;
+ pinmux_set_mux_7531(gsw, gpio_mdc_pins[group],
+ gpio_mdc_funcs[group]);
+ pinmux_set_mux_7531(gsw, gpio_mdio_pins[group],
+ gpio_mdio_funcs[group]);
+ }
+
+ return 0;
+}
+
+static void mt7531_phy_pll_setup(struct gsw_mt753x *gsw)
+{
+ u32 hwstrap;
+ u32 val;
+
+ val = mt753x_reg_read(gsw, CHIP_REV);
+ if ((val & CHIP_REV_M) > 0)
+ return;
+
+ hwstrap = mt753x_reg_read(gsw, HWSTRAP);
+
+ switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) {
+ case XTAL_25MHZ:
+ /* disable pll auto calibration */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608);
+
+ /* change pll sel */
+ val = gsw->mmd_read(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_403);
+ val &= ~(PHY_PLL_M);
+ val |= PHY_PLL_SEL(3);
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
+
+ /* set divider ratio */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_10A, 0x1009);
+
+ /* set divider ratio */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0x7c6);
+
+ /* capacitance and resistance adjustment */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_10C, 0xa8be);
+
+ break;
+ case XTAL_40MHZ:
+ /* disable pll auto calibration */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608);
+
+ /* change pll sel */
+ val = gsw->mmd_read(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_403);
+ val &= ~(PHY_PLL_M);
+ val |= PHY_PLL_SEL(3);
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
+
+ /* set divider ratio */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_10A, 0x1018);
+
+ /* set divider ratio */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0xc676);
+
+ /* capacitance and resistance adjustment */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F,
+ PHY_DEV1F_REG_10C, 0xd8be);
+ break;
+ }
+
+ /* power down pll. additional delay is not required via mdio access */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x10);
+
+ /* power up pll */
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x14);
+}
+
+/* 12 registers for TX_MLT3 waveform tuning.
+ * 012 345 678 9ab
+ * 1 __
+ * _/ \_
+ * 0_/ \
+ * \_ _/
+ * -1 \__/
+ */
+static void mt7531_phy_100m_eye_diag_setting(struct gsw_mt753x *gsw, u32 port)
+{
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x0, 0x187);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x1, 0x1c9);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x2, 0x1c6);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x3, 0x182);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x4, 0x208);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x5, 0x205);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x6, 0x384);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x7, 0x3cb);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x8, 0x3c4);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0x9, 0x30a);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0xa, 0x00b);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_TX_MLT3_BASE + 0xb, 0x002);
+}
+
+static void mt7531_phy_setting(struct gsw_mt753x *gsw)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < MT753X_NUM_PHYS; i++) {
+ mt7531_phy_100m_eye_diag_setting(gsw, i);
+
+ /* Enable HW auto downshift */
+ gsw->mii_write(gsw, i, 0x1f, 0x1);
+ val = gsw->mii_read(gsw, i, PHY_EXT_REG_14);
+ val |= PHY_EN_DOWN_SHFIT;
+ gsw->mii_write(gsw, i, PHY_EXT_REG_14, val);
+
+ /* Decrease SlvDPSready time */
+ val = mt753x_tr_read(gsw, i, PMA_CH, PMA_NOD, PMA_17);
+ val &= ~SLV_DSP_READY_TIME_M;
+ val |= 0xc << SLV_DSP_READY_TIME_S;
+ mt753x_tr_write(gsw, i, PMA_CH, PMA_NOD, PMA_17, val);
+
+ /* Enable Random Update Mechanism */
+ val = mt753x_tr_read(gsw, i, PMA_CH, PMA_NOD, PMA_18);
+ val |= ENABLE_RANDOM_UPDATE_TRIGGER;
+ mt753x_tr_write(gsw, i, PMA_CH, PMA_NOD, PMA_18, val);
+
+ /* PHY link down power saving enable */
+ val = gsw->mii_read(gsw, i, PHY_EXT_REG_17);
+ val |= PHY_LINKDOWN_POWER_SAVING_EN;
+ gsw->mii_write(gsw, i, PHY_EXT_REG_17, val);
+
+ val = gsw->mmd_read(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6);
+ val &= ~PHY_POWER_SAVING_M;
+ val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S;
+ gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6, val);
+
+ /* Timing Recovery for GbE slave mode */
+ mt753x_tr_write(gsw, i, PMA_CH, PMA_NOD, PMA_01, 0x6fb90a);
+ mt753x_tr_write(gsw, i, DSP_CH, DSP_NOD, DSP_06, 0x2ebaef);
+ val = gsw->mmd_read(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_234);
+ val |= TR_OPEN_LOOP_EN;
+ gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_234, val);
+
+ /* Enable Asymmetric Pause Capability */
+ val = gsw->mii_read(gsw, i, MII_ADVERTISE);
+ val |= ADVERTISE_PAUSE_ASYM;
+ gsw->mii_write(gsw, i, MII_ADVERTISE, val);
+ }
+}
+
+static void mt7531_adjust_line_driving(struct gsw_mt753x *gsw, u32 port)
+{
+ /* For ADC timing margin window for LDO calibration */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_LDO_CONTROL_2, 0x2222);
+
+ /* Adjust AD sample timing */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_CONTROL_3, 0x4444);
+
+ /* Adjust Line driver current for different mode */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_271, 0x2ca5);
+
+ /* Adjust Line driver current for different mode */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_272, 0xc6b);
+
+ /* Adjust Line driver gain for 10BT from 1000BT calibration result */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_273, 0x3000);
+
+ /* Adjust RX Echo path filter */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_0FE, 0x2);
+
+ /* Adjust RX HVGA bias current */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_41, 0x3333);
+
+ /* Adjust TX class AB driver 1 */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_268, 0x384);
+
+ /* Adjust TX class AB driver 2 */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_269, 0x1114);
+
+ /* Adjust DAC delay for TX Pairs */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_13, 0x404);
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_14, 0x404);
+
+ /* Adjust DAC digital delay for TX Delay */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_44, 0xc0);
+
+ /* Adjust Line driver compensation cap for stability concern due to
+ * increase current.
+ */
+ gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_26A, 0x3333);
+}
+
+static void mt7531_eee_setting(struct gsw_mt753x *gsw, u32 port)
+{
+ u32 val;
+
+ /* Disable EEE */
+ gsw->mmd_write(gsw, port, PHY_DEV07, PHY_DEV07_REG_03C, 0);
+
+ /* Disable generate signal to clear the scramble_lock when lpi mode */
+ val = gsw->mmd_read(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189);
+ val &= ~DESCRAMBLER_CLEAR_EN;
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189, val);
+
+ /* Roll back EEE Slave Mode */
+ gsw->mmd_write(gsw, port, 0x1e, 0x2d1, 0);
+ mt753x_tr_write(gsw, port, DSP_CH, DSP_NOD, DSP_08, 0x1b);
+ mt753x_tr_write(gsw, port, DSP_CH, DSP_NOD, DSP_0f, 0);
+ mt753x_tr_write(gsw, port, DSP_CH, DSP_NOD, DSP_10, 0x5000);
+
+ /* Adjust 100_mse_threshold */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_123, 0xffff);
+
+ /* Disable mcc */
+ gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_A6, 0x300);
+}
+
+static void mt7531_afifo_reset(struct gsw_mt753x *gsw, int enable)
+{
+ int p;
+ u32 val;
+
+ if (enable) {
+ for (p = 0; p < MT753X_NUM_PORTS; p++) {
+ val = mt753x_reg_read(gsw, DBG_CNT(p));
+ val &= ~DIS_CLR;
+ mt753x_reg_write(gsw, DBG_CNT(p), val);
+ }
+ } else {
+ for (p = 0; p < MT753X_NUM_PORTS; p++) {
+ val = mt753x_reg_read(gsw, DBG_CNT(p));
+ val |= DIS_CLR;
+ mt753x_reg_write(gsw, DBG_CNT(p), val);
+ }
+ }
+}
+
+static int mt7531_sw_init(struct gsw_mt753x *gsw)
+{
+ int i;
+ u32 val;
+
+ gsw->phy_base = (gsw->smi_addr + 1) & MT753X_SMI_ADDR_MASK;
+
+ gsw->mii_read = mt753x_mii_read;
+ gsw->mii_write = mt753x_mii_write;
+ gsw->mmd_read = mt753x_mmd_read;
+ gsw->mmd_write = mt753x_mmd_write;
+
+ gsw->hw_phy_cal = of_property_read_bool(gsw->dev->of_node, "mediatek,hw_phy_cal");
+
+ for (i = 0; i < MT753X_NUM_PHYS; i++) {
+ val = gsw->mii_read(gsw, i, MII_BMCR);
+ val |= BMCR_ISOLATE;
+ gsw->mii_write(gsw, i, MII_BMCR, val);
+ }
+
+ /* Force MAC link down before reset */
+ mt753x_reg_write(gsw, PMCR(5), FORCE_MODE_LNK);
+ mt753x_reg_write(gsw, PMCR(6), FORCE_MODE_LNK);
+
+ /* Switch soft reset */
+ mt753x_reg_write(gsw, SYS_CTRL, SW_SYS_RST | SW_REG_RST);
+ usleep_range(10, 20);
+
+ /* Enable MDC input Schmitt Trigger */
+ val = mt753x_reg_read(gsw, SMT0_IOLB);
+ mt753x_reg_write(gsw, SMT0_IOLB, val | SMT_IOLB_5_SMI_MDC_EN);
+
+ /* Set 7531 gpio pinmux */
+ mt7531_set_gpio_pinmux(gsw);
+
+ mt7531_core_pll_setup(gsw);
+ mt7531_mac_port_setup(gsw, 5, &gsw->port5_cfg);
+ mt7531_mac_port_setup(gsw, 6, &gsw->port6_cfg);
+
+ /* Global mac control settings */
+ mt753x_reg_write(gsw, GMACCR,
+ (15 << MTCC_LMT_S) | (15 << MAX_RX_JUMBO_S) |
+ RX_PKT_LEN_MAX_JUMBO);
+
+ /* Enable Collision Poll */
+ val = mt753x_reg_read(gsw, CPGC_CTRL);
+ val |= COL_CLK_EN;
+ mt753x_reg_write(gsw, CPGC_CTRL, val);
+ val |= COL_RST_N;
+ mt753x_reg_write(gsw, CPGC_CTRL, val);
+ val |= COL_EN;
+ mt753x_reg_write(gsw, CPGC_CTRL, val);
+
+ /* Disable AFIFO reset for extra short IPG */
+ mt7531_afifo_reset(gsw, 0);
+
+ return 0;
+}
+
+static int mt7531_sw_post_init(struct gsw_mt753x *gsw)
+{
+ int i;
+ u32 val;
+
+ /* Let internal PHYs only Tx constant data in configure stage. */
+ for (i = 0; i < MT753X_NUM_PHYS; i++)
+ gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_141, 0x200);
+
+ /* Internal PHYs might be enabled by HW Bootstrapping, or bootloader.
+ * Turn off PHYs before setup PHY PLL.
+ */
+ val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403);
+ val |= PHY_EN_BYPASS_MODE;
+ val |= POWER_ON_OFF;
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
+
+ mt7531_phy_pll_setup(gsw);
+
+ /* Enable Internal PHYs before phy setting */
+ val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403);
+ val |= PHY_EN_BYPASS_MODE;
+ val &= ~POWER_ON_OFF;
+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
+
+ mt7531_phy_setting(gsw);
+
+ for (i = 0; i < MT753X_NUM_PHYS; i++) {
+ val = gsw->mii_read(gsw, i, MII_BMCR);
+ val &= ~BMCR_ISOLATE;
+ gsw->mii_write(gsw, i, MII_BMCR, val);
+ }
+
+ for (i = 0; i < MT753X_NUM_PHYS; i++) {
+ mt7531_adjust_line_driving(gsw, i);
+ mt7531_eee_setting(gsw, i);
+ }
+
+ /* Restore internal PHYs normal Tx function after configure stage. */
+ for (i = 0; i < MT753X_NUM_PHYS; i++)
+ gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_141, 0x0);
+
+ mt7531_internal_phy_calibration(gsw);
+
+ return 0;
+}
+
+struct mt753x_sw_id mt7531_id = {
+ .model = MT7531,
+ .detect = mt7531_sw_detect,
+ .init = mt7531_sw_init,
+ .post_init = mt7531_sw_post_init
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhanguo Ju <zhanguo.ju@mediatek.com>");
+MODULE_DESCRIPTION("Driver for MediaTek MT753x Gigabit Switch");