[][Add initial mtk feed for OpenWRT v21.02]
[Description]
Add initial mtk feed for OpenWRT v21.02
[Release-log]
N/A
Change-Id: I8051c6ba87f1ccf26c02fdd88a17d66f63c0b101
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/4495320
diff --git a/target/linux/mediatek/files-5.4/drivers/mtd/mtk-snand/mtk-snand-def.h b/target/linux/mediatek/files-5.4/drivers/mtd/mtk-snand/mtk-snand-def.h
new file mode 100644
index 0000000..95c4bb3
--- /dev/null
+++ b/target/linux/mediatek/files-5.4/drivers/mtd/mtk-snand/mtk-snand-def.h
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#ifndef _MTK_SNAND_DEF_H_
+#define _MTK_SNAND_DEF_H_
+
+#include "mtk-snand-os.h"
+
+#ifdef PRIVATE_MTK_SNAND_HEADER
+#include "mtk-snand.h"
+#else
+#include <mtk-snand.h>
+#endif
+
+struct mtk_snand_plat_dev;
+
+enum snand_flash_io {
+ SNAND_IO_1_1_1,
+ SNAND_IO_1_1_2,
+ SNAND_IO_1_2_2,
+ SNAND_IO_1_1_4,
+ SNAND_IO_1_4_4,
+
+ __SNAND_IO_MAX
+};
+
+#define SPI_IO_1_1_1 BIT(SNAND_IO_1_1_1)
+#define SPI_IO_1_1_2 BIT(SNAND_IO_1_1_2)
+#define SPI_IO_1_2_2 BIT(SNAND_IO_1_2_2)
+#define SPI_IO_1_1_4 BIT(SNAND_IO_1_1_4)
+#define SPI_IO_1_4_4 BIT(SNAND_IO_1_4_4)
+
+struct snand_opcode {
+ uint8_t opcode;
+ uint8_t dummy;
+};
+
+struct snand_io_cap {
+ uint8_t caps;
+ struct snand_opcode opcodes[__SNAND_IO_MAX];
+};
+
+#define SNAND_OP(_io, _opcode, _dummy) [_io] = { .opcode = (_opcode), \
+ .dummy = (_dummy) }
+
+#define SNAND_IO_CAP(_name, _caps, ...) \
+ struct snand_io_cap _name = { .caps = (_caps), \
+ .opcodes = { __VA_ARGS__ } }
+
+#define SNAND_MAX_ID_LEN 4
+
+enum snand_id_type {
+ SNAND_ID_DYMMY,
+ SNAND_ID_ADDR = SNAND_ID_DYMMY,
+ SNAND_ID_DIRECT,
+
+ __SNAND_ID_TYPE_MAX
+};
+
+struct snand_id {
+ uint8_t type; /* enum snand_id_type */
+ uint8_t len;
+ uint8_t id[SNAND_MAX_ID_LEN];
+};
+
+#define SNAND_ID(_type, ...) \
+ { .type = (_type), .id = { __VA_ARGS__ }, \
+ .len = sizeof((uint8_t[]) { __VA_ARGS__ }) }
+
+struct snand_mem_org {
+ uint16_t pagesize;
+ uint16_t sparesize;
+ uint16_t pages_per_block;
+ uint16_t blocks_per_die;
+ uint16_t planes_per_die;
+ uint16_t ndies;
+};
+
+#define SNAND_MEMORG(_ps, _ss, _ppb, _bpd, _ppd, _nd) \
+ { .pagesize = (_ps), .sparesize = (_ss), .pages_per_block = (_ppb), \
+ .blocks_per_die = (_bpd), .planes_per_die = (_ppd), .ndies = (_nd) }
+
+typedef int (*snand_select_die_t)(struct mtk_snand *snf, uint32_t dieidx);
+
+struct snand_flash_info {
+ const char *model;
+ struct snand_id id;
+ const struct snand_mem_org memorg;
+ const struct snand_io_cap *cap_rd;
+ const struct snand_io_cap *cap_pl;
+ snand_select_die_t select_die;
+};
+
+#define SNAND_INFO(_model, _id, _memorg, _cap_rd, _cap_pl, ...) \
+ { .model = (_model), .id = _id, .memorg = _memorg, \
+ .cap_rd = (_cap_rd), .cap_pl = (_cap_pl), __VA_ARGS__ }
+
+const struct snand_flash_info *snand_flash_id_lookup(enum snand_id_type type,
+ const uint8_t *id);
+
+struct mtk_snand_soc_data {
+ uint16_t sector_size;
+ uint16_t max_sectors;
+ uint16_t fdm_size;
+ uint16_t fdm_ecc_size;
+ uint16_t fifo_size;
+
+ bool bbm_swap;
+ bool empty_page_check;
+ uint32_t mastersta_mask;
+
+ const uint8_t *spare_sizes;
+ uint32_t num_spare_size;
+};
+
+enum mtk_ecc_regs {
+ ECC_DECDONE,
+};
+
+struct mtk_ecc_soc_data {
+ const uint8_t *ecc_caps;
+ uint32_t num_ecc_cap;
+ const uint32_t *regs;
+ uint16_t mode_shift;
+ uint8_t errnum_bits;
+ uint8_t errnum_shift;
+};
+
+struct mtk_snand {
+ struct mtk_snand_plat_dev *pdev;
+
+ void __iomem *nfi_base;
+ void __iomem *ecc_base;
+
+ enum mtk_snand_soc soc;
+ const struct mtk_snand_soc_data *nfi_soc;
+ const struct mtk_ecc_soc_data *ecc_soc;
+ bool snfi_quad_spi;
+ bool quad_spi_op;
+
+ const char *model;
+ uint64_t size;
+ uint64_t die_size;
+ uint32_t erasesize;
+ uint32_t writesize;
+ uint32_t oobsize;
+
+ uint32_t num_dies;
+ snand_select_die_t select_die;
+
+ uint8_t opcode_rfc;
+ uint8_t opcode_pl;
+ uint8_t dummy_rfc;
+ uint8_t mode_rfc;
+ uint8_t mode_pl;
+
+ uint32_t writesize_mask;
+ uint32_t writesize_shift;
+ uint32_t erasesize_mask;
+ uint32_t erasesize_shift;
+ uint64_t die_mask;
+ uint32_t die_shift;
+
+ uint32_t spare_per_sector;
+ uint32_t raw_sector_size;
+ uint32_t ecc_strength;
+ uint32_t ecc_steps;
+ uint32_t ecc_bytes;
+ uint32_t ecc_parity_bits;
+
+ uint8_t *page_cache; /* Used by read/write page */
+ uint8_t *buf_cache; /* Used by block bad/markbad & auto_oob */
+};
+
+enum mtk_snand_log_category {
+ SNAND_LOG_NFI,
+ SNAND_LOG_SNFI,
+ SNAND_LOG_ECC,
+ SNAND_LOG_CHIP,
+
+ __SNAND_LOG_CAT_MAX
+};
+
+int mtk_ecc_setup(struct mtk_snand *snf, void *fmdaddr, uint32_t max_ecc_bytes,
+ uint32_t msg_size);
+int mtk_snand_ecc_encoder_start(struct mtk_snand *snf);
+void mtk_snand_ecc_encoder_stop(struct mtk_snand *snf);
+int mtk_snand_ecc_decoder_start(struct mtk_snand *snf);
+void mtk_snand_ecc_decoder_stop(struct mtk_snand *snf);
+int mtk_ecc_wait_decoder_done(struct mtk_snand *snf);
+int mtk_ecc_check_decode_error(struct mtk_snand *snf, uint32_t page);
+
+int mtk_snand_mac_io(struct mtk_snand *snf, const uint8_t *out, uint32_t outlen,
+ uint8_t *in, uint32_t inlen);
+int mtk_snand_set_feature(struct mtk_snand *snf, uint32_t addr, uint32_t val);
+
+int mtk_snand_log(struct mtk_snand_plat_dev *pdev,
+ enum mtk_snand_log_category cat, const char *fmt, ...);
+
+#define snand_log_nfi(pdev, fmt, ...) \
+ mtk_snand_log(pdev, SNAND_LOG_NFI, fmt, ##__VA_ARGS__)
+
+#define snand_log_snfi(pdev, fmt, ...) \
+ mtk_snand_log(pdev, SNAND_LOG_SNFI, fmt, ##__VA_ARGS__)
+
+#define snand_log_ecc(pdev, fmt, ...) \
+ mtk_snand_log(pdev, SNAND_LOG_ECC, fmt, ##__VA_ARGS__)
+
+#define snand_log_chip(pdev, fmt, ...) \
+ mtk_snand_log(pdev, SNAND_LOG_CHIP, fmt, ##__VA_ARGS__)
+
+/* ffs64 */
+static inline int mtk_snand_ffs64(uint64_t x)
+{
+ if (!x)
+ return 0;
+
+ if (!(x & 0xffffffff))
+ return ffs((uint32_t)(x >> 32)) + 32;
+
+ return ffs((uint32_t)(x & 0xffffffff));
+}
+
+/* NFI dummy commands */
+#define NFI_CMD_DUMMY_READ 0x00
+#define NFI_CMD_DUMMY_WRITE 0x80
+
+/* SPI-NAND opcodes */
+#define SNAND_CMD_RESET 0xff
+#define SNAND_CMD_BLOCK_ERASE 0xd8
+#define SNAND_CMD_READ_FROM_CACHE_QUAD 0xeb
+#define SNAND_CMD_WINBOND_SELECT_DIE 0xc2
+#define SNAND_CMD_READ_FROM_CACHE_DUAL 0xbb
+#define SNAND_CMD_READID 0x9f
+#define SNAND_CMD_READ_FROM_CACHE_X4 0x6b
+#define SNAND_CMD_READ_FROM_CACHE_X2 0x3b
+#define SNAND_CMD_PROGRAM_LOAD_X4 0x32
+#define SNAND_CMD_SET_FEATURE 0x1f
+#define SNAND_CMD_READ_TO_CACHE 0x13
+#define SNAND_CMD_PROGRAM_EXECUTE 0x10
+#define SNAND_CMD_GET_FEATURE 0x0f
+#define SNAND_CMD_READ_FROM_CACHE 0x0b
+#define SNAND_CMD_WRITE_ENABLE 0x06
+#define SNAND_CMD_PROGRAM_LOAD 0x02
+
+/* SPI-NAND feature addresses */
+#define SNAND_FEATURE_MICRON_DIE_ADDR 0xd0
+#define SNAND_MICRON_DIE_SEL_1 BIT(6)
+
+#define SNAND_FEATURE_STATUS_ADDR 0xc0
+#define SNAND_STATUS_OIP BIT(0)
+#define SNAND_STATUS_WEL BIT(1)
+#define SNAND_STATUS_ERASE_FAIL BIT(2)
+#define SNAND_STATUS_PROGRAM_FAIL BIT(3)
+
+#define SNAND_FEATURE_CONFIG_ADDR 0xb0
+#define SNAND_FEATURE_QUAD_ENABLE BIT(0)
+#define SNAND_FEATURE_ECC_EN BIT(4)
+
+#define SNAND_FEATURE_PROTECT_ADDR 0xa0
+
+#endif /* _MTK_SNAND_DEF_H_ */