diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index 35e15df..2c8860e 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -14,36 +14,41 @@
 #include <linux/io.h>
 
 /**
- * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * read_poll_timeout - Periodically poll an address until a condition is
+ *			met or a timeout occurs
+ * @op: accessor function (takes @args as its arguments)
  * @val: Variable to read the value into
  * @cond: Break condition (usually involving @val)
  * @sleep_us: Maximum time to sleep between reads in us (0
  *            tight-loops).  Should be less than ~20ms since usleep_range
  *            is used (see Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
+ * @sleep_before_read: if it is true, sleep @sleep_us before read.
+ * @args: arguments for @op poll
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
- * case, the last read value at @addr is stored in @val. Must not
+ * case, the last read value at @args is stored in @val. Must not
  * be called from atomic context if sleep_us or timeout_us are used.
  *
  * When available, you'll probably want to use one of the specialized
  * macros defined below rather than this macro directly.
  */
-#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us)	\
+#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \
+				sleep_before_read, args...) \
 ({ \
 	u64 __timeout_us = (timeout_us); \
 	unsigned long __sleep_us = (sleep_us); \
 	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
 	might_sleep_if((__sleep_us) != 0); \
+	if (sleep_before_read && __sleep_us) \
+		usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
 	for (;;) { \
-		(val) = op(addr); \
+		(val) = op(args); \
 		if (cond) \
 			break; \
 		if (__timeout_us && \
 		    ktime_compare(ktime_get(), __timeout) > 0) { \
-			(val) = op(addr); \
+			(val) = op(args); \
 			break; \
 		} \
 		if (__sleep_us) \
@@ -53,42 +58,87 @@
 })
 
 /**
- * readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * read_poll_timeout_atomic - Periodically poll an address until a condition is
+ * 				met or a timeout occurs
+ * @op: accessor function (takes @args as its arguments)
  * @val: Variable to read the value into
  * @cond: Break condition (usually involving @val)
  * @delay_us: Time to udelay between reads in us (0 tight-loops).  Should
  *            be less than ~10us since udelay is used (see
  *            Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
+ * @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
- * case, the last read value at @addr is stored in @val.
+ * case, the last read value at @args is stored in @val.
  *
  * When available, you'll probably want to use one of the specialized
  * macros defined below rather than this macro directly.
  */
-#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \
+#define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \
+					delay_before_read, args...) \
 ({ \
 	u64 __timeout_us = (timeout_us); \
 	unsigned long __delay_us = (delay_us); \
 	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+	if (delay_before_read && __delay_us) \
+		udelay(__delay_us); \
 	for (;;) { \
-		(val) = op(addr); \
+		(val) = op(args); \
 		if (cond) \
 			break; \
 		if (__timeout_us && \
 		    ktime_compare(ktime_get(), __timeout) > 0) { \
-			(val) = op(addr); \
+			(val) = op(args); \
 			break; \
 		} \
 		if (__delay_us) \
-			udelay(__delay_us);	\
+			udelay(__delay_us); \
 	} \
 	(cond) ? 0 : -ETIMEDOUT; \
 })
 
+/**
+ * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ *            tight-loops).  Should be less than ~20ms since usleep_range
+ *            is used (see Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val. Must not
+ * be called from atomic context if sleep_us or timeout_us are used.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us)	\
+	read_poll_timeout(op, val, cond, sleep_us, timeout_us, false, addr)
+
+/**
+ * readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops).  Should
+ *            be less than ~10us since udelay is used (see
+ *            Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @addr is stored in @val.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \
+	read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, false, addr)
 
 #define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \
 	readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us)