[][MAC80211][Change MT76 Makefile and add bersa support]
[Description]
Change MT76 Makefile and add bersa support
[Release-log]
N/A
Change-Id: Iecb0e9968c8e212a6ab92698c84d2e3a56dbd65b
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/5809192
diff --git a/autobuild_mac80211_release/mt7986_bersa_mac80211/package/kernel/mt76/src/mt76x2/mt76x2.h b/autobuild_mac80211_release/mt7986_bersa_mac80211/package/kernel/mt76/src/mt76x2/mt76x2.h
new file mode 100644
index 0000000..be12173
--- /dev/null
+++ b/autobuild_mac80211_release/mt7986_bersa_mac80211/package/kernel/mt76/src/mt76x2/mt76x2.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
+ */
+
+#ifndef __MT76x2_H
+#define __MT76x2_H
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/bitops.h>
+
+#define MT7662_FIRMWARE "mt7662.bin"
+#define MT7662_ROM_PATCH "mt7662_rom_patch.bin"
+#define MT7662_EEPROM_SIZE 512
+
+#include "../mt76x02.h"
+#include "mac.h"
+
+static inline bool is_mt7612(struct mt76x02_dev *dev)
+{
+ return mt76_chip(&dev->mt76) == 0x7612;
+}
+
+static inline bool mt76x2_channel_silent(struct mt76x02_dev *dev)
+{
+ struct ieee80211_channel *chan = dev->mphy.chandef.chan;
+
+ return ((chan->flags & IEEE80211_CHAN_RADAR) &&
+ chan->dfs_state != NL80211_DFS_AVAILABLE);
+}
+
+extern const struct ieee80211_ops mt76x2_ops;
+
+int mt76x2_register_device(struct mt76x02_dev *dev);
+int mt76x2_resume_device(struct mt76x02_dev *dev);
+
+int mt76x2_set_sar_specs(struct ieee80211_hw *hw,
+ const struct cfg80211_sar_specs *sar);
+void mt76x2_phy_power_on(struct mt76x02_dev *dev);
+void mt76x2_stop_hardware(struct mt76x02_dev *dev);
+int mt76x2_eeprom_init(struct mt76x02_dev *dev);
+int mt76x2_apply_calibration_data(struct mt76x02_dev *dev, int channel);
+
+void mt76x2_phy_set_antenna(struct mt76x02_dev *dev);
+int mt76x2_phy_start(struct mt76x02_dev *dev);
+int mt76x2_phy_set_channel(struct mt76x02_dev *dev,
+ struct cfg80211_chan_def *chandef);
+void mt76x2_phy_calibrate(struct work_struct *work);
+void mt76x2_phy_set_txpower(struct mt76x02_dev *dev);
+
+int mt76x2_mcu_init(struct mt76x02_dev *dev);
+int mt76x2_mcu_set_channel(struct mt76x02_dev *dev, u8 channel, u8 bw,
+ u8 bw_index, bool scan);
+int mt76x2_mcu_load_cr(struct mt76x02_dev *dev, u8 type, u8 temp_level,
+ u8 channel);
+
+void mt76x2_cleanup(struct mt76x02_dev *dev);
+
+int mt76x2_mac_reset(struct mt76x02_dev *dev, bool hard);
+void mt76x2_reset_wlan(struct mt76x02_dev *dev, bool enable);
+void mt76x2_init_txpower(struct mt76x02_dev *dev,
+ struct ieee80211_supported_band *sband);
+void mt76_write_mac_initvals(struct mt76x02_dev *dev);
+
+void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev);
+void mt76x2_phy_set_txpower_regs(struct mt76x02_dev *dev,
+ enum nl80211_band band);
+void mt76x2_configure_tx_delay(struct mt76x02_dev *dev,
+ enum nl80211_band band, u8 bw);
+void mt76x2_apply_gain_adj(struct mt76x02_dev *dev);
+void mt76x2_phy_update_channel_gain(struct mt76x02_dev *dev);
+
+#endif