diff --git a/target/linux/mediatek/files-5.4/drivers/thermal/mtk_thermal.c b/target/linux/mediatek/files-5.4/drivers/thermal/mtk_thermal.c
new file mode 100644
index 0000000..97e8678
--- /dev/null
+++ b/target/linux/mediatek/files-5.4/drivers/thermal/mtk_thermal.c
@@ -0,0 +1,1127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Hanyi Wu <hanyi.wu@mediatek.com>
+ *         Sascha Hauer <s.hauer@pengutronix.de>
+ *         Dawei Chien <dawei.chien@mediatek.com>
+ *         Louis Yu <louis.yu@mediatek.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/thermal.h>
+#include <linux/reset.h>
+#include <linux/types.h>
+
+/* AUXADC Registers */
+#define AUXADC_CON1_SET_V	0x008
+#define AUXADC_CON1_CLR_V	0x00c
+#define AUXADC_CON2_V		0x010
+#define AUXADC_DATA(channel)	(0x14 + (channel) * 4)
+
+#define APMIXED_SYS_TS_CON1	0x604
+
+/* Thermal Controller Registers */
+#define TEMP_MONCTL0		0x000
+#define TEMP_MONCTL1		0x004
+#define TEMP_MONCTL2		0x008
+#define TEMP_MONIDET0		0x014
+#define TEMP_MONIDET1		0x018
+#define TEMP_MSRCTL0		0x038
+#define TEMP_MSRCTL1		0x03c
+#define TEMP_AHBPOLL		0x040
+#define TEMP_AHBTO		0x044
+#define TEMP_ADCPNP0		0x048
+#define TEMP_ADCPNP1		0x04c
+#define TEMP_ADCPNP2		0x050
+#define TEMP_ADCPNP3		0x0b4
+
+#define TEMP_ADCMUX		0x054
+#define TEMP_ADCEN		0x060
+#define TEMP_PNPMUXADDR		0x064
+#define TEMP_ADCMUXADDR		0x068
+#define TEMP_ADCENADDR		0x074
+#define TEMP_ADCVALIDADDR	0x078
+#define TEMP_ADCVOLTADDR	0x07c
+#define TEMP_RDCTRL		0x080
+#define TEMP_ADCVALIDMASK	0x084
+#define TEMP_ADCVOLTAGESHIFT	0x088
+#define TEMP_ADCWRITECTRL	0x08c
+#define TEMP_MSR0		0x090
+#define TEMP_MSR1		0x094
+#define TEMP_MSR2		0x098
+#define TEMP_MSR3		0x0B8
+
+#define TEMP_SPARE0		0x0f0
+
+#define TEMP_ADCPNP0_1          0x148
+#define TEMP_ADCPNP1_1          0x14c
+#define TEMP_ADCPNP2_1          0x150
+#define TEMP_MSR0_1             0x190
+#define TEMP_MSR1_1             0x194
+#define TEMP_MSR2_1             0x198
+#define TEMP_ADCPNP3_1          0x1b4
+#define TEMP_MSR3_1             0x1B8
+
+#define PTPCORESEL		0x400
+
+#define TEMP_MONCTL1_PERIOD_UNIT(x)	((x) & 0x3ff)
+
+#define TEMP_MONCTL2_FILTER_INTERVAL(x)	(((x) & 0x3ff) << 16)
+#define TEMP_MONCTL2_SENSOR_INTERVAL(x)	((x) & 0x3ff)
+
+#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)	(x)
+
+#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE		BIT(0)
+#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE		BIT(1)
+
+#define TEMP_ADCVALIDMASK_VALID_HIGH		BIT(5)
+#define TEMP_ADCVALIDMASK_VALID_POS(bit)	(bit)
+
+/* MT8173 thermal sensors */
+#define MT8173_TS1	0
+#define MT8173_TS2	1
+#define MT8173_TS3	2
+#define MT8173_TS4	3
+#define MT8173_TSABB	4
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT8173_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT8173 */
+#define MT8173_NUM_SENSORS		5
+
+/* The number of banks in the MT8173 */
+#define MT8173_NUM_ZONES		4
+
+/* The number of sensing points per bank */
+#define MT8173_NUM_SENSORS_PER_ZONE	4
+
+/* The number of controller in the MT8173 */
+#define MT8173_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT8173_CALIBRATION	165
+
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
+ * MT8183 has 6 sensors and needs 6 VTS calibration data.
+ * MT8173 has 5 sensors and needs 5 VTS calibration data.
+ * MT2701 has 3 sensors and needs 3 VTS calibration data.
+ * MT2712 has 4 sensors and needs 4 VTS calibration data.
+ */
+#define CALIB_BUF0_VALID_V1		BIT(0)
+#define CALIB_BUF1_ADC_GE_V1(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_VTS_TS1_V1(x)	(((x) >> 17) & 0x1ff)
+#define CALIB_BUF0_VTS_TS2_V1(x)	(((x) >> 8) & 0x1ff)
+#define CALIB_BUF1_VTS_TS3_V1(x)	(((x) >> 0) & 0x1ff)
+#define CALIB_BUF2_VTS_TS4_V1(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF2_VTS_TS5_V1(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF2_VTS_TSABB_V1(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF0_DEGC_CALI_V1(x)	(((x) >> 1) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V1(x)	(((x) >> 26) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
+#define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
+
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT7622.
+ */
+#define CALIB_BUF0_ADC_OE_V2(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_ADC_GE_V2(x)		(((x) >> 12) & 0x3ff)
+#define CALIB_BUF0_DEGC_CALI_V2(x)	(((x) >> 6) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V2(x)	(((x) >> 0) & 0x3f)
+#define CALIB_BUF1_VTS_TS1_V2(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF1_VTS_TS2_V2(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF1_VTS_TSABB_V2(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF1_VALID_V2(x)		(((x) >> 4) & 0x1)
+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x)	(((x) >> 3) & 0x1)
+
+enum {
+	VTS1,
+	VTS2,
+	VTS3,
+	VTS4,
+	VTS5,
+	VTSABB,
+	MAX_NUM_VTS,
+};
+
+enum mtk_thermal_version {
+	MTK_THERMAL_V1 = 1,
+	MTK_THERMAL_V2,
+};
+
+/* MT2701 thermal sensors */
+#define MT2701_TS1	0
+#define MT2701_TS2	1
+#define MT2701_TSABB	2
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2701_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT2701 */
+#define MT2701_NUM_SENSORS	3
+
+/* The number of sensing points per bank */
+#define MT2701_NUM_SENSORS_PER_ZONE	3
+
+/* The number of controller in the MT2701 */
+#define MT2701_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT2701_CALIBRATION	165
+
+/* MT2712 thermal sensors */
+#define MT2712_TS1	0
+#define MT2712_TS2	1
+#define MT2712_TS3	2
+#define MT2712_TS4	3
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2712_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT2712 */
+#define MT2712_NUM_SENSORS	4
+
+/* The number of sensing points per bank */
+#define MT2712_NUM_SENSORS_PER_ZONE	4
+
+/* The number of controller in the MT2712 */
+#define MT2712_NUM_CONTROLLER		1
+
+/* The calibration coefficient of sensor  */
+#define MT2712_CALIBRATION	165
+
+#define MT7622_TEMP_AUXADC_CHANNEL	11
+#define MT7622_NUM_SENSORS		1
+#define MT7622_NUM_ZONES		1
+#define MT7622_NUM_SENSORS_PER_ZONE	1
+#define MT7622_TS1	0
+#define MT7622_NUM_CONTROLLER		1
+
+/* The maximum number of banks */
+#define MAX_NUM_ZONES		8
+
+/* The calibration coefficient of sensor  */
+#define MT7622_CALIBRATION	165
+
+/* MT8183 thermal sensors */
+#define MT8183_TS1	0
+#define MT8183_TS2	1
+#define MT8183_TS3	2
+#define MT8183_TS4	3
+#define MT8183_TS5	4
+#define MT8183_TSABB	5
+
+/* AUXADC channel  is used for the temperature sensors */
+#define MT8183_TEMP_AUXADC_CHANNEL	11
+
+/* The total number of temperature sensors in the MT8183 */
+#define MT8183_NUM_SENSORS	6
+
+/* The number of banks in the MT8183 */
+#define MT8183_NUM_ZONES               1
+
+/* The number of sensing points per bank */
+#define MT8183_NUM_SENSORS_PER_ZONE	 6
+
+/* The number of controller in the MT8183 */
+#define MT8183_NUM_CONTROLLER		2
+
+/* The calibration coefficient of sensor  */
+#define MT8183_CALIBRATION	153
+
+struct mtk_thermal;
+
+struct thermal_bank_cfg {
+	unsigned int num_sensors;
+	const int *sensors;
+};
+
+struct mtk_thermal_bank {
+	struct mtk_thermal *mt;
+	int id;
+};
+
+struct mtk_thermal_data {
+	s32 num_banks;
+	s32 num_sensors;
+	s32 auxadc_channel;
+	const int *vts_index;
+	const int *sensor_mux_values;
+	const int *msr;
+	const int *adcpnp;
+	const int cali_val;
+	const int num_controller;
+	const int *controller_offset;
+	bool need_switch_bank;
+	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
+	enum mtk_thermal_version version;
+};
+
+struct mtk_thermal {
+	struct device *dev;
+	void __iomem *thermal_base;
+
+	struct clk *clk_peri_therm;
+	struct clk *clk_auxadc;
+	/* lock: for getting and putting banks */
+	struct mutex lock;
+
+	/* Calibration values */
+	s32 adc_ge;
+	s32 adc_oe;
+	s32 degc_cali;
+	s32 o_slope;
+	s32 o_slope_sign;
+	s32 vts[MAX_NUM_VTS];
+
+	const struct mtk_thermal_data *conf;
+	struct mtk_thermal_bank banks[MAX_NUM_ZONES];
+};
+
+/* MT8183 thermal sensor data */
+static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
+	MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
+};
+
+static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
+};
+
+static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
+	TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
+};
+
+static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
+static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
+
+static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
+};
+
+/* MT8173 thermal sensor data */
+static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
+	{ MT8173_TS2, MT8173_TS3 },
+	{ MT8173_TS2, MT8173_TS4 },
+	{ MT8173_TS1, MT8173_TS2, MT8173_TSABB },
+	{ MT8173_TS2 },
+};
+
+static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
+};
+
+static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4, VTSABB
+};
+
+/* MT2701 thermal sensor data */
+static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
+	MT2701_TS1, MT2701_TS2, MT2701_TSABB
+};
+
+static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
+static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3
+};
+
+/* MT2712 thermal sensor data */
+static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
+	MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
+};
+
+static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
+	TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
+};
+
+static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
+	TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
+static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
+
+static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
+	VTS1, VTS2, VTS3, VTS4
+};
+
+/* MT7622 thermal sensor data */
+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
+static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
+static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
+
+/*
+ * The MT8173 thermal controller has four banks. Each bank can read up to
+ * four temperature sensors simultaneously. The MT8173 has a total of 5
+ * temperature sensors. We use each bank to measure a certain area of the
+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
+ * areas, hence is used in different banks.
+ *
+ * The thermal core only gets the maximum temperature of all banks, so
+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data, and this indeed needs the temperatures of the individual banks
+ * for making better decisions.
+ */
+static const struct mtk_thermal_data mt8173_thermal_data = {
+	.auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT8173_NUM_ZONES,
+	.num_sensors = MT8173_NUM_SENSORS,
+	.vts_index = mt8173_vts_index,
+	.cali_val = MT8173_CALIBRATION,
+	.num_controller = MT8173_NUM_CONTROLLER,
+	.controller_offset = mt8173_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 2,
+			.sensors = mt8173_bank_data[0],
+		}, {
+			.num_sensors = 2,
+			.sensors = mt8173_bank_data[1],
+		}, {
+			.num_sensors = 3,
+			.sensors = mt8173_bank_data[2],
+		}, {
+			.num_sensors = 1,
+			.sensors = mt8173_bank_data[3],
+		},
+	},
+	.msr = mt8173_msr,
+	.adcpnp = mt8173_adcpnp,
+	.sensor_mux_values = mt8173_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * The MT2701 thermal controller has one bank, which can read up to
+ * three temperature sensors simultaneously. The MT2701 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2701_thermal_data = {
+	.auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
+	.num_banks = 1,
+	.num_sensors = MT2701_NUM_SENSORS,
+	.vts_index = mt2701_vts_index,
+	.cali_val = MT2701_CALIBRATION,
+	.num_controller = MT2701_NUM_CONTROLLER,
+	.controller_offset = mt2701_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 3,
+			.sensors = mt2701_bank_data,
+		},
+	},
+	.msr = mt2701_msr,
+	.adcpnp = mt2701_adcpnp,
+	.sensor_mux_values = mt2701_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * The MT2712 thermal controller has one bank, which can read up to
+ * four temperature sensors simultaneously. The MT2712 has a total of 4
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2712_thermal_data = {
+	.auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
+	.num_banks = 1,
+	.num_sensors = MT2712_NUM_SENSORS,
+	.vts_index = mt2712_vts_index,
+	.cali_val = MT2712_CALIBRATION,
+	.num_controller = MT2712_NUM_CONTROLLER,
+	.controller_offset = mt2712_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 4,
+			.sensors = mt2712_bank_data,
+		},
+	},
+	.msr = mt2712_msr,
+	.adcpnp = mt2712_adcpnp,
+	.sensor_mux_values = mt2712_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/*
+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
+ * access.
+ */
+static const struct mtk_thermal_data mt7622_thermal_data = {
+	.auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT7622_NUM_ZONES,
+	.num_sensors = MT7622_NUM_SENSORS,
+	.vts_index = mt7622_vts_index,
+	.cali_val = MT7622_CALIBRATION,
+	.num_controller = MT7622_NUM_CONTROLLER,
+	.controller_offset = mt7622_tc_offset,
+	.need_switch_bank = true,
+	.bank_data = {
+		{
+			.num_sensors = 1,
+			.sensors = mt7622_bank_data,
+		},
+	},
+	.msr = mt7622_msr,
+	.adcpnp = mt7622_adcpnp,
+	.sensor_mux_values = mt7622_mux_values,
+	.version = MTK_THERMAL_V2,
+};
+
+/*
+ * The MT8183 thermal controller has one bank for the current SW framework.
+ * The MT8183 has a total of 6 temperature sensors.
+ * There are two thermal controller to control the six sensor.
+ * The first one bind 2 sensor, and the other bind 4 sensors.
+ * The thermal core only gets the maximum temperature of all sensor, so
+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data, and this indeed needs the temperatures of the individual banks
+ * for making better decisions.
+ */
+static const struct mtk_thermal_data mt8183_thermal_data = {
+	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
+	.num_banks = MT8183_NUM_ZONES,
+	.num_sensors = MT8183_NUM_SENSORS,
+	.vts_index = mt8183_vts_index,
+	.cali_val = MT8183_CALIBRATION,
+	.num_controller = MT8183_NUM_CONTROLLER,
+	.controller_offset = mt8183_tc_offset,
+	.need_switch_bank = false,
+	.bank_data = {
+		{
+			.num_sensors = 6,
+			.sensors = mt8183_bank_data,
+		},
+	},
+
+	.msr = mt8183_msr,
+	.adcpnp = mt8183_adcpnp,
+	.sensor_mux_values = mt8183_mux_values,
+	.version = MTK_THERMAL_V1,
+};
+
+/**
+ * raw_to_mcelsius - convert a raw ADC value to mcelsius
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
+ * @raw:	raw ADC value
+ *
+ * This converts the raw ADC value to mcelsius using the SoC specific
+ * calibration constants
+ */
+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 tmp;
+
+	raw &= 0xfff;
+
+	tmp = 203450520 << 3;
+	tmp /= mt->conf->cali_val + mt->o_slope;
+	tmp /= 10000 + mt->adc_ge;
+	tmp *= raw - mt->vts[sensno] - 3350;
+	tmp >>= 3;
+
+	return mt->degc_cali * 500 - tmp;
+}
+
+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+	s32 format_1;
+	s32 format_2;
+	s32 g_oe;
+	s32 g_gain;
+	s32 g_x_roomt;
+	s32 tmp;
+
+	if (raw == 0)
+		return 0;
+
+	raw &= 0xfff;
+	g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
+	g_oe = mt->adc_oe - 512;
+	format_1 = mt->vts[VTS2] + 3105 - g_oe;
+	format_2 = (mt->degc_cali * 10) >> 1;
+	g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
+
+	tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
+	tmp = tmp * 10 * 100 / 11;
+
+	if (mt->o_slope_sign == 0)
+		tmp = tmp / (165 - mt->o_slope);
+	else
+		tmp = tmp / (165 + mt->o_slope);
+
+	return (format_2 - tmp) * 100;
+}
+
+/**
+ * mtk_thermal_get_bank - get bank
+ * @bank:	The bank
+ *
+ * The bank registers are banked, we have to select a bank in the
+ * PTPCORESEL register to access it.
+ */
+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+	u32 val;
+
+	if (mt->conf->need_switch_bank) {
+		mutex_lock(&mt->lock);
+
+		val = readl(mt->thermal_base + PTPCORESEL);
+		val &= ~0xf;
+		val |= bank->id;
+		writel(val, mt->thermal_base + PTPCORESEL);
+	}
+}
+
+/**
+ * mtk_thermal_put_bank - release bank
+ * @bank:	The bank
+ *
+ * release a bank previously taken with mtk_thermal_get_bank,
+ */
+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+
+	if (mt->conf->need_switch_bank)
+		mutex_unlock(&mt->lock);
+}
+
+/**
+ * mtk_thermal_bank_temperature - get the temperature of a bank
+ * @bank:	The bank
+ *
+ * The temperature of a bank is considered the maximum temperature of
+ * the sensors associated to the bank.
+ */
+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
+{
+	struct mtk_thermal *mt = bank->mt;
+	const struct mtk_thermal_data *conf = mt->conf;
+	int i, temp = INT_MIN, max = INT_MIN;
+	u32 raw;
+
+	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
+		raw = readl(mt->thermal_base + conf->msr[i]);
+
+		if (mt->conf->version == MTK_THERMAL_V1) {
+			temp = raw_to_mcelsius_v1(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		} else {
+			temp = raw_to_mcelsius_v2(
+				mt, conf->bank_data[bank->id].sensors[i], raw);
+		}
+
+		/*
+		 * The first read of a sensor often contains very high bogus
+		 * temperature value. Filter these out so that the system does
+		 * not immediately shut down.
+		 */
+		if (temp > 200000)
+			temp = 0;
+
+		if (temp > max)
+			max = temp;
+	}
+
+	return max;
+}
+
+static int mtk_read_temp(void *data, int *temperature)
+{
+	struct mtk_thermal *mt = data;
+	int i;
+	int tempmax = INT_MIN;
+
+	for (i = 0; i < mt->conf->num_banks; i++) {
+		struct mtk_thermal_bank *bank = &mt->banks[i];
+
+		mtk_thermal_get_bank(bank);
+
+		tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
+
+		mtk_thermal_put_bank(bank);
+	}
+
+	*temperature = tempmax;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
+	.get_temp = mtk_read_temp,
+};
+
+static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
+				  u32 apmixed_phys_base, u32 auxadc_phys_base,
+				  int ctrl_id)
+{
+	struct mtk_thermal_bank *bank = &mt->banks[num];
+	const struct mtk_thermal_data *conf = mt->conf;
+	int i;
+
+	int offset = mt->conf->controller_offset[ctrl_id];
+	void __iomem *controller_base = mt->thermal_base + offset;
+
+	bank->id = num;
+	bank->mt = mt;
+
+	mtk_thermal_get_bank(bank);
+
+	/* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
+	writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
+
+	/*
+	 * filt interval is 1 * 46.540us = 46.54us,
+	 * sen interval is 429 * 46.540us = 19.96ms
+	 */
+	writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
+			TEMP_MONCTL2_SENSOR_INTERVAL(429),
+			controller_base + TEMP_MONCTL2);
+
+	/* poll is set to 10u */
+	writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
+	       controller_base + TEMP_AHBPOLL);
+
+	/* temperature sampling control, 1 sample */
+	writel(0x0, controller_base + TEMP_MSRCTL0);
+
+	/* exceed this polling time, IRQ would be inserted */
+	writel(0xffffffff, controller_base + TEMP_AHBTO);
+
+	/* number of interrupts per event, 1 is enough */
+	writel(0x0, controller_base + TEMP_MONIDET0);
+	writel(0x0, controller_base + TEMP_MONIDET1);
+
+	/*
+	 * The MT8173 thermal controller does not have its own ADC. Instead it
+	 * uses AHB bus accesses to control the AUXADC. To do this the thermal
+	 * controller has to be programmed with the physical addresses of the
+	 * AUXADC registers and with the various bit positions in the AUXADC.
+	 * Also the thermal controller controls a mux in the APMIXEDSYS register
+	 * space.
+	 */
+
+	/*
+	 * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
+	 * automatically by hw
+	 */
+	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
+
+	/* AHB address for auxadc mux selection */
+	writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
+	       controller_base + TEMP_ADCMUXADDR);
+
+	if (mt->conf->version == MTK_THERMAL_V1) {
+		/* AHB address for pnp sensor mux selection */
+		writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
+		       controller_base + TEMP_PNPMUXADDR);
+	}
+
+	/* AHB value for auxadc enable */
+	writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
+
+	/* AHB address for auxadc enable (channel 0 immediate mode selected) */
+	writel(auxadc_phys_base + AUXADC_CON1_SET_V,
+	       controller_base + TEMP_ADCENADDR);
+
+	/* AHB address for auxadc valid bit */
+	writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
+	       controller_base + TEMP_ADCVALIDADDR);
+
+	/* AHB address for auxadc voltage output */
+	writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
+	       controller_base + TEMP_ADCVOLTADDR);
+
+	/* read valid & voltage are at the same register */
+	writel(0x0, controller_base + TEMP_RDCTRL);
+
+	/* indicate where the valid bit is */
+	writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
+	       controller_base + TEMP_ADCVALIDMASK);
+
+	/* no shift */
+	writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
+
+	/* enable auxadc mux write transaction */
+	writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+		controller_base + TEMP_ADCWRITECTRL);
+
+	for (i = 0; i < conf->bank_data[num].num_sensors; i++)
+		writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
+		       mt->thermal_base + conf->adcpnp[i]);
+
+	writel((1 << conf->bank_data[num].num_sensors) - 1,
+	       controller_base + TEMP_MONCTL0);
+
+	writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
+	       TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+	       controller_base + TEMP_ADCWRITECTRL);
+
+	mtk_thermal_put_bank(bank);
+}
+
+static u64 of_get_phys_base(struct device_node *np)
+{
+	u64 size64;
+	const __be32 *regaddr_p;
+
+	regaddr_p = of_get_address(np, 0, &size64, NULL);
+	if (!regaddr_p)
+		return OF_BAD_ADDR;
+
+	return of_translate_address(np, regaddr_p);
+}
+
+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
+{
+	int i;
+
+	if (!(buf[0] & CALIB_BUF0_VALID_V1))
+		return -EINVAL;
+
+	mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
+
+	for (i = 0; i < mt->conf->num_sensors; i++) {
+		switch (mt->conf->vts_index[i]) {
+		case VTS1:
+			mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
+			break;
+		case VTS2:
+			mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
+			break;
+		case VTS3:
+			mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
+			break;
+		case VTS4:
+			mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
+			break;
+		case VTS5:
+			mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
+			break;
+		case VTSABB:
+			mt->vts[VTSABB] =
+				CALIB_BUF2_VTS_TSABB_V1(buf[2]);
+			break;
+		default:
+			break;
+		}
+	}
+
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
+	if (CALIB_BUF1_ID_V1(buf[1]) &
+	    CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
+		mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
+	else
+		mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
+
+	return 0;
+}
+
+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
+{
+	if (!CALIB_BUF1_VALID_V2(buf[1]))
+		return -EINVAL;
+
+	mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
+	mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
+	mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
+	mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
+	mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
+	mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
+	mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
+
+	return 0;
+}
+
+static int mtk_thermal_get_calibration_data(struct device *dev,
+					    struct mtk_thermal *mt)
+{
+	struct nvmem_cell *cell;
+	u32 *buf;
+	size_t len;
+	int i, ret = 0;
+
+	/* Start with default values */
+	mt->adc_ge = 512;
+	for (i = 0; i < mt->conf->num_sensors; i++)
+		mt->vts[i] = 260;
+	mt->degc_cali = 40;
+	mt->o_slope = 0;
+
+	cell = nvmem_cell_get(dev, "calibration-data");
+	if (IS_ERR(cell)) {
+		if (PTR_ERR(cell) == -EPROBE_DEFER)
+			return PTR_ERR(cell);
+		return 0;
+	}
+
+	buf = (u32 *)nvmem_cell_read(cell, &len);
+
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	if (len < 3 * sizeof(u32)) {
+		dev_warn(dev, "invalid calibration data\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (mt->conf->version == MTK_THERMAL_V1)
+		ret = mtk_thermal_extract_efuse_v1(mt, buf);
+	else
+		ret = mtk_thermal_extract_efuse_v2(mt, buf);
+
+	if (ret) {
+		dev_info(dev, "Device not calibrated, using default calibration values\n");
+		ret = 0;
+	}
+
+out:
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct of_device_id mtk_thermal_of_match[] = {
+	{
+		.compatible = "mediatek,mt8173-thermal",
+		.data = (void *)&mt8173_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt2701-thermal",
+		.data = (void *)&mt2701_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt2712-thermal",
+		.data = (void *)&mt2712_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt7622-thermal",
+		.data = (void *)&mt7622_thermal_data,
+	},
+	{
+		.compatible = "mediatek,mt8183-thermal",
+		.data = (void *)&mt8183_thermal_data,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
+
+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+{
+	int tmp;
+
+	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
+	tmp &= ~(0x37);
+	tmp |= 0x1;
+	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	udelay(200);
+}
+
+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
+					    void __iomem *auxadc_base)
+{
+	int tmp;
+
+	writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
+	writel(0x1, mt->thermal_base + TEMP_MONCTL0);
+	tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
+	writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
+}
+
+static int mtk_thermal_probe(struct platform_device *pdev)
+{
+	int ret, i, ctrl_id;
+	struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
+	struct mtk_thermal *mt;
+	struct resource *res;
+	u64 auxadc_phys_base, apmixed_phys_base;
+	struct thermal_zone_device *tzdev;
+	void __iomem *apmixed_base, *auxadc_base;
+
+	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
+	if (!mt)
+		return -ENOMEM;
+
+	mt->conf = of_device_get_match_data(&pdev->dev);
+
+	mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
+	if (IS_ERR(mt->clk_peri_therm))
+		return PTR_ERR(mt->clk_peri_therm);
+
+	mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
+	if (IS_ERR(mt->clk_auxadc))
+		return PTR_ERR(mt->clk_auxadc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mt->thermal_base))
+		return PTR_ERR(mt->thermal_base);
+
+	ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
+	if (ret)
+		return ret;
+
+	mutex_init(&mt->lock);
+
+	mt->dev = &pdev->dev;
+
+	auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
+	if (!auxadc) {
+		dev_err(&pdev->dev, "missing auxadc node\n");
+		return -ENODEV;
+	}
+
+	auxadc_base = of_iomap(auxadc, 0);
+	auxadc_phys_base = of_get_phys_base(auxadc);
+
+	of_node_put(auxadc);
+
+	if (auxadc_phys_base == OF_BAD_ADDR) {
+		dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+		return -EINVAL;
+	}
+
+	apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
+	if (!apmixedsys) {
+		dev_err(&pdev->dev, "missing apmixedsys node\n");
+		return -ENODEV;
+	}
+
+	apmixed_base = of_iomap(apmixedsys, 0);
+	apmixed_phys_base = of_get_phys_base(apmixedsys);
+
+	of_node_put(apmixedsys);
+
+	if (apmixed_phys_base == OF_BAD_ADDR) {
+		dev_err(&pdev->dev, "Can't get auxadc phys address\n");
+		return -EINVAL;
+	}
+
+	ret = device_reset_optional(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(mt->clk_auxadc);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(mt->clk_peri_therm);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
+		goto err_disable_clk_auxadc;
+	}
+
+	if (mt->conf->version == MTK_THERMAL_V2) {
+		mtk_thermal_turn_on_buffer(apmixed_base);
+		mtk_thermal_release_periodic_ts(mt, auxadc_base);
+	}
+
+	for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
+		for (i = 0; i < mt->conf->num_banks; i++)
+			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+					      auxadc_phys_base, ctrl_id);
+
+	platform_set_drvdata(pdev, mt);
+
+	tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
+						     &mtk_thermal_ops);
+	if (IS_ERR(tzdev)) {
+		ret = PTR_ERR(tzdev);
+		goto err_disable_clk_peri_therm;
+	}
+
+	return 0;
+
+err_disable_clk_peri_therm:
+	clk_disable_unprepare(mt->clk_peri_therm);
+err_disable_clk_auxadc:
+	clk_disable_unprepare(mt->clk_auxadc);
+
+	return ret;
+}
+
+static int mtk_thermal_remove(struct platform_device *pdev)
+{
+	struct mtk_thermal *mt = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(mt->clk_peri_therm);
+	clk_disable_unprepare(mt->clk_auxadc);
+
+	return 0;
+}
+
+static struct platform_driver mtk_thermal_driver = {
+	.probe = mtk_thermal_probe,
+	.remove = mtk_thermal_remove,
+	.driver = {
+		.name = "mtk-thermal",
+		.of_match_table = mtk_thermal_of_match,
+	},
+};
+
+module_platform_driver(mtk_thermal_driver);
+
+MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
+MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek thermal driver");
+MODULE_LICENSE("GPL v2");