| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Author(s): | |
| * laj | |
| * | |
| * Distributed by: | |
| * Silicon Laboratories, Inc | |
| * | |
| * This file contains proprietary information. | |
| * No dissemination allowed without prior written permission from | |
| * Silicon Laboratories, Inc. | |
| * | |
| * | |
| */ | |
| #ifndef PROSLIC_API_CFG | |
| #define PROSLIC_API_CFG | |
| /** @defgroup PROSLIC_CFG ProSLIC Configuration Options | |
| * @{ | |
| */ | |
| /** @defgroup PROSLIC_DRIVER_SEL ProSLIC Driver Selection | |
| * Define device driver to be compiled. | |
| * @{ | |
| */ | |
| #ifdef PROSLIC_DOXYGEN | |
| #define SI3217X /**< Define to support Si3217x chipset family in the build */ | |
| #undef SI3217X | |
| #define SI3217X_REVC_ONLY /**< Define to ONLY have Si3217x Rev C support (drop Rev B support) */ | |
| #undef SI3217X_REVC_ONLY | |
| #define SI3217X_REVB_ONLY /**< Define to ONLY have Si3217x Rev B support (drop Rev C support) */ | |
| #undef SI3217X_REVB_ONLY | |
| #define SI3218X /**< Define to support Si3218x chipset family in the build */ | |
| #undef SI3218X | |
| #define SI3219X /**< Define to support Si3219x chipset family in the build */ | |
| #undef SI3219X | |
| #define SI3226X /**< Define to support Si3226x chipset family in the build */ | |
| #undef SI3226X | |
| #define SI3228X /**< Define to support Si3228x chipset family in the build */ | |
| #undef SI3228X | |
| #error DO NOT BUILD WITH PROSLIC_DOXYGEN ENABLED | |
| #endif | |
| /** @} PROSLIC_DRIVER_SEL*/ | |
| /** @defgroup CODE_OPTS Code feature options | |
| * Select which options NOT to build - just uncomment out the undef to disable feature. | |
| * @{ | |
| */ | |
| #define DISABLE_VERIFY_PATCH /**< Disable patch load verification */ | |
| #undef DISABLE_VERIFY_PATCH | |
| #define DISABLE_FSK_SETUP /**< Disable the FSK setup & associated functions */ | |
| #undef DISABLE_FSK_SETUP | |
| #define DISABLE_TONE_SETUP /**< Disable Tone setup API */ | |
| #undef DISABLE_TONE_SETUP | |
| #define DISABLE_RING_SETUP /**< Disable Ring setup API */ | |
| #undef DISABLE_RING_SETUP | |
| #define DISABLE_DCFEED_SETUP /**< Disable DC FEED setup API */ | |
| #undef DISABLE_DCFEED_SETUP | |
| #define DISABLE_GPIO_SETUP /**< Disable GPIO setup API */ | |
| #undef DISABLE_GPIO_SETUP | |
| #define DISABLE_PCM_SETUP /**< Disable PCM setup API */ | |
| #undef DISABLE_PCM_SETUP | |
| #define ENABLE_DEBUG /**< Enable debug messages - function entry, etc. */ | |
| /* #undef ENABLE_DEBUG */ | |
| #define DISABLE_CI_SETUP /**< Disable CI Setup */ | |
| #undef DISABLE_CI_SETUP | |
| #define DISABLE_ZSYNTH_SETUP /**< Disable Zsyth/impedance setup */ | |
| #undef DISABLE_ZSYNTH_SETUP | |
| #define DISABLE_MALLOC /**< Don't use MALLOC/FREE, instead assume user will statically allocate */ | |
| #undef DISABLE_MALLOC | |
| #define DISABLE_HPF_WIDEBAND /**< Disable RX and TX HPF when in WIDEBAND mode */ | |
| #undef DISABLE_HPF_WIDEBAND | |
| #define PROSLIC_OPTIMIZE_INTERRUPTS /**< Enable optimization for interrupts for dual channel devices. This | |
| optimization assumes channel number is on even boundaries - that is | |
| 0,2,4, are the first channel for each dual channel devices. | |
| */ | |
| #define ENABLE_TRACES /**< Enable this to see major API calls during software execution. NOT recommended for production code since it does add code space + can generate compiler warnings. */ | |
| #undef ENABLE_TRACES | |
| #define SI_ENABLE_LOGGING /**< This will enable the ability to log to a file - this assumes the application supports this. See api_demo for example implementation */ | |
| #undef SI_ENABLE_LOGGING | |
| #define DISABLE_HOOKCHANGE /**< Disable ProSLIC_HookChangeDetect() and associated functions */ | |
| #undef DISABLE_HOOKCHANGE | |
| #define DISABLE_PULSEMETERING /**< Disable pulse metering functions */ | |
| #undef DISABLE_PULSEMETERING | |
| /**@} */ | |
| #define SIVOICE_NEON_MWI_SUPPORT /**< Enable NEON Message Waiting Indicator support */ | |
| #undef SIVOICE_NEON_MWI_SUPPORT | |
| #define GCI_MODE /**< Set if GCI vs. SPI/PCM mode is to be used */ | |
| #undef GCI_MODE | |
| #define ENABLE_HIRES_GAIN /**< Set for zsynth preset gains in dB*10 rather than dB */ | |
| #undef ENABLE_HIRES_GAIN | |
| #define PRINT_TO_STRING 0 /**< Set this to 1 if printing to a string buffer vs. console - you may change/remove this*/ | |
| /** @defgroup MULTI_BOM Multiple Device/BOM Option Support | |
| * Assign patch structure names to macros used in device drivers | |
| * @{ */ | |
| #define SIVOICE_MULTI_BOM_SUPPORT /**< Enable Multiple General Configuration Support */ | |
| #undef SIVOICE_MULTI_BOM_SUPPORT | |
| #ifdef SIVOICE_MULTI_BOM_SUPPORT | |
| #define SI3217X_PATCH_B_FLBK si3217xPatchRevBFlbk /**< Si3217x B Flyback DCDC Converter patch */ | |
| #define SI3217X_PATCH_B_BKBT si3217xPatchRevBBkbt /**< Si3217x B Buck-boost DCDC Converter patch */ | |
| #define SI3217X_PATCH_B_PBB si3217xPatchRevBBkbt /**< Si3217x B PMOS Buck-boost DCDC Converter patch */ | |
| #define SI3217X_PATCH_B_LCQCUK si3217xPatchRevBFlbk /**< Si3217x C Quasi-CUK DCDC Converter patch */ | |
| #define SI3217X_PATCH_C_FLBK si3217xPatchRevCFlbk /**< Si3217x C Flyback DCDC Converter patch */ | |
| #define SI3217X_PATCH_C_BKBT si3217xPatchRevCFlbk /**< Si3217x C Buck-boost DCDC Converter patch */ | |
| #define SI3217X_PATCH_C_PBB si3217xPatchRevCFlbk /**< Si3217x C PMOS Buck-boost DCDC Converter patch */ | |
| #define SI3217X_PATCH_C_LCQCUK si3217xPatchRevCFlbk /**< Si3217x C Quasi-CUK DCDC Converter patch */ | |
| #define SI3218X_PATCH_A si3218xPatchRevALCQC /**< Si3218x LCQC 5W DCDC Converter patch */ | |
| #define SI3219X_PATCH_A si3219xPatchRevALCQC /**< SI3219x patch */ | |
| #define SI3226X_PATCH_C_FLBK si3226xPatchRevCFlbk /**< Si3226x RevC Flyback DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_CUK si3226xPatchRevCFlbk /**< Si3226x RevC Full CUK DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_QCUK si3226xPatchRevCFlbk /**< Si3226x RevC Quasi-CUK DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_LCQCUK si3226xPatchRevCFlbk /**< Si3226x RevC Low-cost QCUK DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_TSS si3226xPatchRevCTss /**< Si3226x RevC TSS DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_TSS_ISO si3226xPatchRevCTssIso /**< Si3226x RevC TSS (isolated) DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_PBB si3226xPatchRevCFlbk /**< Si3226x PMOS Buck-boost DCDC Converter patch */ | |
| #define SI3226x_PATCH_C_FIXRL SI3226X_PATCH_C_TSS | |
| #define SI3226X_PATCH_C_QSS si3226xPatchRevCTss /**< Si3226x RevC QSS DCDC Converter Patch */ | |
| #define SI3226X_PATCH_C_BB si3226xPatchRevCFlbk /**< Si3226x BJT Buck-boost DCDC Converter patch */ | |
| #define SI3228X_PATCH_A si3228xPatchRevALCQC /**< Si3228x LCQC 5W DCDC Converter patch */ | |
| #endif | |
| /* Default patch names for backwards compatibility */ | |
| #define SI3217X_PATCH_B_DEFAULT RevBPatch | |
| #define SI3217X_PATCH_C_DEFAULT RevCPatch | |
| #define SI3218X_PATCH_A_DEFAULT RevAPatch | |
| #define SI3219X_PATCH_A_DEFAULT RevAPatch | |
| #define SI3226X_PATCH_C_DEFAULT RevCPatch | |
| #define SI3228X_PATCH_A_DEFAULT RevAPatch | |
| /** @} MULTI_BOM */ | |
| #include <linux/module.h> | |
| #define LOGPRINT(...) printk(KERN_ERR __VA_ARGS__) | |
| #ifdef SI_ENABLE_LOGGING | |
| #ifdef PROSLIC_LINUX_KERNEL | |
| #error "Logging currently implemented only for userspace programs." | |
| #endif | |
| extern FILE *SILABS_LOG_FP; /* This global variable would need to be initialized by the user's program - see the api demo for example */ | |
| #endif /* SI_ENABLE_LOGGING */ | |
| #ifdef ENABLE_DEBUG | |
| #define DEBUG_ENABLED(X) ((X)->debugMode & 1) | |
| #ifdef SI_ENABLE_LOGGING | |
| #define DEBUG_PRINT(CHPTR,...) if( DEBUG_ENABLED(CHPTR) ){ fprintf(SILABS_LOG_FP, __VA_ARGS__); fflush(SILABS_LOG_FP);} | |
| #else | |
| #define DEBUG_PRINT(CHPTR,...) if( DEBUG_ENABLED(CHPTR) ) LOGPRINT(__VA_ARGS__) | |
| #endif /* Logging */ | |
| #else /* No Debug */ | |
| /* Handled in si_voice.h */ | |
| #endif | |
| #define SI_ENABLE_LOGGING | |
| #ifdef ENABLE_TRACES | |
| #define TRACE_ENABLED(X) ((X)->debugMode & 2) | |
| #ifdef SI_ENABLE_LOGGING | |
| #define TRACEPRINT(CHPTR,FMT,...) if(TRACE_ENABLED(CHPTR)) {fprintf(SILABS_LOG_FP, "#TRC:%s channel: %d "FMT,__FUNCTION__, (CHPTR)->channel,__VA_ARGS__); fflush(SILABS_LOG_FP); } | |
| #define TRACEPRINT_NOCHAN(FMT,...) fprintf(SILABS_LOG_FP, "#TRC:%s "FMT,__FUNCTION__, __VA_ARGS__); fflush(SILABS_LOG_FP) | |
| #else | |
| #define TRACEPRINT(CHPTR,FMT,...) if(TRACE_ENABLED(CHPTR)) LOGPRINT("TRC:%s channel: %d "FMT,__FUNCTION__, (CHPTR)->channel,__VA_ARGS__) | |
| #define TRACEPRINT_NOCHAN(FMT,...) LOGPRINT("TRC:%s "FMT,__FUNCTION__, __VA_ARGS__) | |
| #endif /* SI_ENABLE_LOGGING */ | |
| #else | |
| /* Handled in si_voice.h */ | |
| #endif | |
| /** @defgroup PSTN_CFG PSTN Detection Options | |
| * @{ */ | |
| #define PSTN_DET_ENABLE /**< Define to include Differential PSTN detection code */ | |
| #undef PSTN_DET_ENABLE | |
| #define PSTN_DET_OPEN_FEMF_SETTLE 1500 /**< OPEN foreign voltage measurement settle time */ | |
| #define PSTN_DET_DIFF_SAMPLES 4 /**< Number of I/V samples averaged [1 to 16] */ | |
| #define PSTN_DET_MIN_ILOOP 700 /**< Minimum acceptable loop current */ | |
| #define PSTN_DET_MAX_FEMF 10000 /**< Maximum OPEN state foreign voltage */ | |
| #define PSTN_DET_POLL_RATE 10 /**< Rate of re-entrant code in ms */ | |
| #define PSTN_DET_DIFF_IV1_SETTLE 1000 /**< Settle time before first I/V measurment in ms */ | |
| #define PSTN_DET_DIFF_IV2_SETTLE 1000 /**< Settle time before first I/V measurment in ms */ | |
| /** @} PSTN_CFG */ | |
| #define SIVOICE_CFG_NEWTYPES_ONLY 1 /**< Set if not supporting Legacy types */ | |
| /**@} */ | |
| #endif | |