tree 95f8b0018533660bb9d1e1a267a93a74e8287e05
parent bfbd31a7b4db0289e95a1267117fc3398c6bd5fe
author developer <developer@mediatek.com> 1656386696 +0800
committer developer <developer@mediatek.com> 1657270760 +0800

[][MAC80211][hostapd][Add mtk vendor subcmd EDCCA control]

[Description]
Add vendor command to control EDCCA CR.

First you have to add two configuration into hostapd configuration file.
1. edcca_enable=0
2. edcca_compensation=5

The config "edcca_enable" is used to config the opeation mode of EDCCA.
The value 0 means force disable and 1 means auto mode.
The config "edcca_compensation" is used to lower the EDCCA threshold. Please noted
that compensate value only apply for 6g band interface.

hostapd_cli command usage:

hostapd_cli -i <interface> raw SET_EDCCA [mode|compensation] [value]
* This command is used to configure EDCCA mode or compensate.
* If you want to set mode, value can be 0 or 1.
* If you want to set compensation, value shall be compensate value you want.

hostapd_cli -i <interface> raw GET_EDCCA
* This command is used to check current EDCCA configuration in hostapd.

hostapd_cli -i <interface> raw APPLY_EDCCA
* This command is used to prepare EDCCA subcmd according to the configuration in hostapd
 and then sent it to driver to modify the CR.

[Release-log]
N/A

Change-Id: I576f60818eb817237f7101fd03ef7634f26840fe
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6127821