diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 67f34ed..ead9b37 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -40,8 +40,9 @@ enum {
 struct phylink {
 	/* private: */
 	struct net_device *netdev;
-	const struct phylink_mac_ops *ops;
+	const struct phylink_mac_ops *mac_ops;
 	struct phylink_config *config;
+	struct phylink_pcs *pcs;
 	struct device *dev;
 	unsigned int old_link_state:1;
 
@@ -70,6 +71,7 @@ struct phylink {
 	struct work_struct resolve;
 
 	bool mac_link_dropped;
+	bool using_mac_select_pcs;
 
 	struct sfp_bus *sfp_bus;
 	bool sfp_may_have_phy;
@@ -153,14 +155,60 @@ static const char *phylink_an_mode_str(unsigned int mode)
 	return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
 }
 
-static int phylink_validate(struct phylink *pl, unsigned long *supported,
-			    struct phylink_link_state *state)
+static int phylink_validate_mac_and_pcs(struct phylink *pl,
+					unsigned long *supported,
+					struct phylink_link_state *state)
 {
-	pl->ops->validate(pl->config, supported, state);
+	struct phylink_pcs *pcs;
+	int ret;
+
+	/* Get the PCS for this interface mode */
+	if (pl->using_mac_select_pcs) {
+		pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
+		if (IS_ERR(pcs))
+			return PTR_ERR(pcs);
+	} else {
+		pcs = pl->pcs;
+	}
+
+	if (pcs) {
+		/* The PCS, if present, must be setup before phylink_create()
+		 * has been called. If the ops is not initialised, print an
+		 * error and backtrace rather than oopsing the kernel.
+		 */
+		if (!pcs->ops) {
+			phylink_err(pl, "interface %s: uninitialised PCS\n",
+				    phy_modes(state->interface));
+			dump_stack();
+			return -EINVAL;
+		}
+
+		/* Validate the link parameters with the PCS */
+		if (pcs->ops->pcs_validate) {
+			ret = pcs->ops->pcs_validate(pcs, supported, state);
+			if (ret < 0 || phylink_is_empty_linkmode(supported))
+				return -EINVAL;
+
+			/* Ensure the advertising mask is a subset of the
+			 * supported mask.
+			 */
+			linkmode_and(state->advertising, state->advertising,
+				     supported);
+		}
+	}
+
+	/* Then validate the link parameters with the MAC */
+	pl->mac_ops->validate(pl->config, supported, state);
 
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
 
+static int phylink_validate(struct phylink *pl, unsigned long *supported,
+			    struct phylink_link_state *state)
+{
+	return phylink_validate_mac_and_pcs(pl, supported, state);
+}
+
 static int phylink_parse_fixedlink(struct phylink *pl,
 				   struct fwnode_handle *fwnode)
 {
@@ -338,6 +386,18 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 	return 0;
 }
 
+static void phylink_pcs_poll_stop(struct phylink *pl)
+{
+	if (pl->cfg_link_an_mode == MLO_AN_INBAND)
+		del_timer(&pl->link_poll);
+}
+
+static void phylink_pcs_poll_start(struct phylink *pl)
+{
+	if (pl->pcs && pl->pcs->poll && pl->cfg_link_an_mode == MLO_AN_INBAND)
+		mod_timer(&pl->link_poll, jiffies + HZ);
+}
+
 static void phylink_mac_config(struct phylink *pl,
 			       const struct phylink_link_state *state)
 {
@@ -350,37 +410,113 @@ static void phylink_mac_config(struct phylink *pl,
 		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
 		    state->pause, state->link, state->an_enabled);
 
-	pl->ops->mac_config(pl->config, pl->cur_link_an_mode, state);
+	pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, state);
 }
 
-static void phylink_mac_config_up(struct phylink *pl,
-				  const struct phylink_link_state *state)
+static void phylink_mac_pcs_an_restart(struct phylink *pl)
 {
-	if (state->link)
-		phylink_mac_config(pl, state);
+	if (pl->link_config.an_enabled &&
+	    phy_interface_mode_is_8023z(pl->link_config.interface) &&
+	    phylink_autoneg_inband(pl->cur_link_an_mode)) {
+		if (pl->pcs)
+			pl->pcs->ops->pcs_an_restart(pl->pcs);
+		else if (pl->mac_ops->mac_an_restart)
+			pl->mac_ops->mac_an_restart(pl->config);
+	}
 }
 
-static void phylink_mac_an_restart(struct phylink *pl)
+static void phylink_major_config(struct phylink *pl, bool restart,
+				  const struct phylink_link_state *state)
 {
-	if (pl->link_config.an_enabled &&
-	    phy_interface_mode_is_8023z(pl->link_config.interface))
-		pl->ops->mac_an_restart(pl->config);
+	struct phylink_pcs *pcs = NULL;
+	bool pcs_changed = false;
+	int err;
+
+	phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
+
+	if (pl->using_mac_select_pcs) {
+		pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
+		if (IS_ERR(pcs)) {
+			phylink_err(pl,
+				    "mac_select_pcs unexpectedly failed: %pe\n",
+				    pcs);
+			return;
+		}
+
+		pcs_changed = pcs && pl->pcs != pcs;
+	}
+
+	phylink_pcs_poll_stop(pl);
+
+	if (pl->mac_ops->mac_prepare) {
+		err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode,
+					       state->interface);
+		if (err < 0) {
+			phylink_err(pl, "mac_prepare failed: %pe\n",
+				    ERR_PTR(err));
+			return;
+		}
+	}
+
+	/* If we have a new PCS, switch to the new PCS after preparing the MAC
+	 * for the change.
+	 */
+	if (pcs_changed)
+		pl->pcs = pcs;
+
+	phylink_mac_config(pl, state);
+
+	if (pl->pcs) {
+		err = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
+					       state->interface,
+					       state->advertising,
+					       !!(pl->link_config.pause &
+						  MLO_PAUSE_AN));
+		if (err < 0)
+			phylink_err(pl, "pcs_config failed: %pe\n",
+				    ERR_PTR(err));
+		if (err > 0)
+			restart = true;
+	}
+	if (restart)
+		phylink_mac_pcs_an_restart(pl);
+
+	if (pl->mac_ops->mac_finish) {
+		err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode,
+					      state->interface);
+		if (err < 0)
+			phylink_err(pl, "mac_finish failed: %pe\n",
+				    ERR_PTR(err));
+	}
+
+	phylink_pcs_poll_start(pl);
 }
 
-static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
+static void phylink_mac_pcs_get_state(struct phylink *pl,
+				      struct phylink_link_state *state)
 {
-
 	linkmode_copy(state->advertising, pl->link_config.advertising);
 	linkmode_zero(state->lp_advertising);
 	state->interface = pl->link_config.interface;
 	state->an_enabled = pl->link_config.an_enabled;
-	state->speed = SPEED_UNKNOWN;
-	state->duplex = DUPLEX_UNKNOWN;
-	state->pause = MLO_PAUSE_NONE;
+	if (state->an_enabled) {
+		state->speed = SPEED_UNKNOWN;
+		state->duplex = DUPLEX_UNKNOWN;
+		state->pause = MLO_PAUSE_NONE;
+	} else {
+		state->speed =  pl->link_config.speed;
+		state->duplex = pl->link_config.duplex;
+		state->pause = pl->link_config.pause;
+	}
 	state->an_complete = 0;
 	state->link = 1;
 
-	return pl->ops->mac_link_state(pl->config, state);
+	if (pl->pcs)
+		pl->pcs->ops->pcs_get_state(pl->pcs, state);
+	else if (pl->mac_ops->mac_link_state)
+		pl->mac_ops->mac_link_state(pl->config, state);
+	else
+		state->link = 0;
 }
 
 /* The fixed state is... fixed except for the link state,
@@ -395,6 +531,34 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
 		state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
 }
 
+static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
+{
+	struct phylink_link_state link_state;
+
+	switch (pl->cur_link_an_mode) {
+	case MLO_AN_PHY:
+		link_state = pl->phy_state;
+		break;
+
+	case MLO_AN_FIXED:
+		phylink_get_fixed_state(pl, &link_state);
+		break;
+
+	case MLO_AN_INBAND:
+		link_state = pl->link_config;
+		if (link_state.interface == PHY_INTERFACE_MODE_SGMII)
+			link_state.pause = MLO_PAUSE_NONE;
+		break;
+
+	default: /* can't happen */
+		return;
+	}
+
+	link_state.link = false;
+
+	phylink_major_config(pl, force_restart, &link_state);
+}
+
 /* Flow control is resolved according to our and the link partners
  * advertisements using the following drawn from the 802.3 specs:
  *  Local device  Link partner
@@ -445,17 +609,25 @@ static const char *phylink_pause_to_str(int pause)
 	}
 }
 
-static void phylink_mac_link_up(struct phylink *pl,
-				struct phylink_link_state link_state)
+static void phylink_link_up(struct phylink *pl,
+			    struct phylink_link_state link_state)
 {
 	struct net_device *ndev = pl->netdev;
+	int speed, duplex;
+
+	speed = link_state.speed;
+	duplex = link_state.duplex;
 
 	pl->cur_interface = link_state.interface;
-	pl->ops->mac_link_up(pl->config, pl->phydev,
-			     pl->cur_link_an_mode, pl->cur_interface,
-			     link_state.speed, link_state.duplex,
-			     !!(link_state.pause & MLO_PAUSE_TX),
-			     !!(link_state.pause & MLO_PAUSE_RX));
+
+	if (pl->pcs && pl->pcs->ops->pcs_link_up)
+		pl->pcs->ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
+					  pl->cur_interface, speed, duplex);
+
+	pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
+				 pl->cur_interface, speed, duplex,
+				 !!(link_state.pause & MLO_PAUSE_TX),
+				 !!(link_state.pause & MLO_PAUSE_RX));
 
 	if (ndev)
 		netif_carrier_on(ndev);
@@ -467,14 +639,14 @@ static void phylink_mac_link_up(struct phylink *pl,
 		     phylink_pause_to_str(link_state.pause));
 }
 
-static void phylink_mac_link_down(struct phylink *pl)
+static void phylink_link_down(struct phylink *pl)
 {
 	struct net_device *ndev = pl->netdev;
 
 	if (ndev)
 		netif_carrier_off(ndev);
-	pl->ops->mac_link_down(pl->config, pl->cur_link_an_mode,
-			       pl->cur_interface);
+	pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode,
+				   pl->cur_interface);
 	phylink_info(pl, "Link is Down\n");
 }
 
@@ -513,7 +685,7 @@ static void phylink_resolve(struct work_struct *w)
 			break;
 
 		case MLO_AN_INBAND:
-			phylink_get_mac_state(pl, &link_state);
+			phylink_mac_pcs_get_state(pl, &link_state);
 
 			/* The PCS may have a latching link-fail indicator.
 			 * If the link was up, bring the link down and
@@ -524,8 +696,8 @@ static void phylink_resolve(struct work_struct *w)
 				if (cur_link_state)
 					retrigger = true;
 				else
-					phylink_get_mac_state(pl,
-							      &link_state);
+					phylink_mac_pcs_get_state(pl,
+								  &link_state);
 			}
 
 			/* If we have a phy, the "up" state is the union of
@@ -564,12 +736,17 @@ static void phylink_resolve(struct work_struct *w)
 			 * then reconfigure.
 			 */
 			if (cur_link_state) {
-				phylink_mac_link_down(pl);
+				phylink_link_down(pl);
 				cur_link_state = false;
 			}
-			phylink_mac_config(pl, &link_state);
+			phylink_major_config(pl, false, &link_state);
 			pl->link_config.interface = link_state.interface;
-		} else {
+		} else if (!pl->pcs) {
+			/* The interface remains unchanged, only the speed,
+			 * duplex or pause settings have changed. Call the
+			 * old mac_config() method to configure the MAC/PCS
+			 * only if we do not have a legacy MAC driver.
+			 */
 			phylink_mac_config(pl, &link_state);
 		}
 	}
@@ -577,9 +754,9 @@ static void phylink_resolve(struct work_struct *w)
 	if (link_state.link != cur_link_state) {
 		pl->old_link_state = link_state.link;
 		if (!link_state.link)
-			phylink_mac_link_down(pl);
+			phylink_link_down(pl);
 		else
-			phylink_mac_link_up(pl, link_state);
+			phylink_link_up(pl, link_state);
 	}
 	if (!link_state.link && retrigger) {
 		pl->mac_link_dropped = false;
@@ -643,7 +820,7 @@ static int phylink_register_sfp(struct phylink *pl,
  * @fwnode: a pointer to a &struct fwnode_handle describing the network
  *	interface
  * @iface: the desired link mode defined by &typedef phy_interface_t
- * @ops: a pointer to a &struct phylink_mac_ops for the MAC.
+ * @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC.
  *
  * Create a new phylink instance, and parse the link parameters found in @np.
  * This will parse in-band modes, fixed-link or SFP configuration.
@@ -656,11 +833,17 @@ static int phylink_register_sfp(struct phylink *pl,
 struct phylink *phylink_create(struct phylink_config *config,
 			       struct fwnode_handle *fwnode,
 			       phy_interface_t iface,
-			       const struct phylink_mac_ops *ops)
+			       const struct phylink_mac_ops *mac_ops)
 {
+	bool using_mac_select_pcs = false;
 	struct phylink *pl;
 	int ret;
 
+	if (mac_ops->mac_select_pcs &&
+	    mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) !=
+	      ERR_PTR(-EOPNOTSUPP))
+		using_mac_select_pcs = true;
+
 	pl = kzalloc(sizeof(*pl), GFP_KERNEL);
 	if (!pl)
 		return ERR_PTR(-ENOMEM);
@@ -678,6 +861,7 @@ struct phylink *phylink_create(struct phylink_config *config,
 		return ERR_PTR(-EINVAL);
 	}
 
+	pl->using_mac_select_pcs = using_mac_select_pcs;
 	pl->phy_state.interface = iface;
 	pl->link_interface = iface;
 	if (iface == PHY_INTERFACE_MODE_MOCA)
@@ -689,7 +873,7 @@ struct phylink *phylink_create(struct phylink_config *config,
 	pl->link_config.speed = SPEED_UNKNOWN;
 	pl->link_config.duplex = DUPLEX_UNKNOWN;
 	pl->link_config.an_enabled = true;
-	pl->ops = ops;
+	pl->mac_ops = mac_ops;
 	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 	timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
 
@@ -1016,6 +1200,8 @@ static irqreturn_t phylink_link_handler(int irq, void *data)
  */
 void phylink_start(struct phylink *pl)
 {
+	bool poll = false;
+
 	ASSERT_RTNL();
 
 	phylink_info(pl, "configuring for %s/%s link mode\n",
@@ -1029,15 +1215,12 @@ void phylink_start(struct phylink *pl)
 	/* Apply the link configuration to the MAC when starting. This allows
 	 * a fixed-link to start with the correct parameters, and also
 	 * ensures that we set the appropriate advertisement for Serdes links.
-	 */
-	phylink_resolve_flow(pl, &pl->link_config);
-	phylink_mac_config(pl, &pl->link_config);
-
-	/* Restart autonegotiation if using 802.3z to ensure that the link
+	 *
+	 * Restart autonegotiation if using 802.3z to ensure that the link
 	 * parameters are properly negotiated.  This is necessary for DSA
 	 * switches using 802.3z negotiation to ensure they see our modes.
 	 */
-	phylink_mac_an_restart(pl);
+	phylink_mac_initial_config(pl, true);
 
 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 	phylink_run_resolve(pl);
@@ -1055,10 +1238,19 @@ void phylink_start(struct phylink *pl)
 				irq = 0;
 		}
 		if (irq <= 0)
-			mod_timer(&pl->link_poll, jiffies + HZ);
+			poll = true;
 	}
-	if ((pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) ||
-	    (pl->cfg_link_an_mode == MLO_AN_INBAND))
+
+	switch (pl->cfg_link_an_mode) {
+	case MLO_AN_FIXED:
+		poll |= pl->config->poll_fixed_state;
+		break;
+	case MLO_AN_INBAND:
+		if (pl->pcs)
+			poll |= pl->pcs->poll;
+		break;
+	}
+	if (poll)
 		mod_timer(&pl->link_poll, jiffies + HZ);
 	if (pl->phydev)
 		phy_start(pl->phydev);
@@ -1202,7 +1394,7 @@ int phylink_ethtool_ksettings_get(struct phylink *pl,
 		if (pl->phydev)
 			break;
 
-		phylink_get_mac_state(pl, &link_state);
+		phylink_mac_pcs_get_state(pl, &link_state);
 
 		/* The MAC is reporting the link results from its own PCS
 		 * layer via in-band status. Report these as the current
@@ -1314,7 +1506,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 	if (pl->cur_link_an_mode == MLO_AN_INBAND &&
 	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
 		phylink_mac_config(pl, &pl->link_config);
-		phylink_mac_an_restart(pl);
+		phylink_mac_pcs_an_restart(pl);
 	}
 	mutex_unlock(&pl->state_mutex);
 
@@ -1341,7 +1533,7 @@ int phylink_ethtool_nway_reset(struct phylink *pl)
 
 	if (pl->phydev)
 		ret = phy_restart_aneg(pl->phydev);
-	phylink_mac_an_restart(pl);
+	phylink_mac_pcs_an_restart(pl);
 
 	return ret;
 }
@@ -1410,7 +1602,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 
 		case MLO_AN_INBAND:
 			phylink_mac_config(pl, config);
-			phylink_mac_an_restart(pl);
+			phylink_mac_pcs_an_restart(pl);
 			break;
 		}
 	}
@@ -1621,10 +1813,7 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
 
 	case MLO_AN_INBAND:
 		if (phy_id == 0) {
-			val = phylink_get_mac_state(pl, &state);
-			if (val < 0)
-				return val;
-
+			phylink_mac_pcs_get_state(pl, &state);
 			val = phylink_mii_emul_read(reg, &state);
 		}
 		break;
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 8229f56..ba0f09d 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -63,17 +63,23 @@ enum phylink_op_type {
  * struct phylink_config - PHYLINK configuration structure
  * @dev: a pointer to a struct device associated with the MAC
  * @type: operation type of PHYLINK instance
+ * @poll_fixed_state: if true, starts link_poll,
+ *		      if MAC link is at %MLO_AN_FIXED mode.
  */
 struct phylink_config {
 	struct device *dev;
 	enum phylink_op_type type;
+	bool poll_fixed_state;
 };
 
 /**
  * struct phylink_mac_ops - MAC operations structure.
  * @validate: Validate and update the link configuration.
+ * @mac_select_pcs: Select a PCS for the interface mode.
  * @mac_link_state: Read the current link state from the hardware.
+ * @mac_prepare: prepare for a major reconfiguration of the interface.
  * @mac_config: configure the MAC for the selected mode and state.
+ * @mac_finish: finish a major reconfiguration of the interface.
  * @mac_an_restart: restart 802.3z BaseX autonegotiation.
  * @mac_link_down: take the link down.
  * @mac_link_up: allow the link to come up.
@@ -84,10 +90,16 @@ struct phylink_mac_ops {
 	void (*validate)(struct phylink_config *config,
 			 unsigned long *supported,
 			 struct phylink_link_state *state);
+	struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config,
+					      phy_interface_t interface);
 	int (*mac_link_state)(struct phylink_config *config,
 			      struct phylink_link_state *state);
+	int (*mac_prepare)(struct phylink_config *config, unsigned int mode,
+			   phy_interface_t iface);
 	void (*mac_config)(struct phylink_config *config, unsigned int mode,
 			   const struct phylink_link_state *state);
+	int (*mac_finish)(struct phylink_config *config, unsigned int mode,
+			  phy_interface_t iface);
 	void (*mac_an_restart)(struct phylink_config *config);
 	void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface);
@@ -126,6 +138,21 @@ struct phylink_mac_ops {
  */
 void validate(struct phylink_config *config, unsigned long *supported,
 	      struct phylink_link_state *state);
+/**
+ * mac_select_pcs: Select a PCS for the interface mode.
+ * @config: a pointer to a &struct phylink_config.
+ * @interface: PHY interface mode for PCS
+ *
+ * Return the &struct phylink_pcs for the specified interface mode, or
+ * NULL if none is required, or an error pointer on error.
+ *
+ * This must not modify any state. It is used to query which PCS should
+ * be used. Phylink will use this during validation to ensure that the
+ * configuration is valid, and when setting a configuration to internally
+ * set the PCS that will be used.
+ */
+struct phylink_pcs *mac_select_pcs(struct phylink_config *config,
+				   phy_interface_t interface);
 
 /**
  * mac_link_state() - Read the current link state from the hardware
@@ -141,6 +168,31 @@ void validate(struct phylink_config *config, unsigned long *supported,
 int mac_link_state(struct phylink_config *config,
 		   struct phylink_link_state *state);
 
+/**
+ * mac_prepare() - prepare to change the PHY interface mode
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @iface: interface mode to switch to
+ *
+ * phylink will call this method at the beginning of a full initialisation
+ * of the link, which includes changing the interface mode or at initial
+ * startup time. It may be called for the current mode. The MAC driver
+ * should perform whatever actions are required, e.g. disabling the
+ * Serdes PHY.
+ *
+ * This will be the first call in the sequence:
+ * - mac_prepare()
+ * - mac_config()
+ * - pcs_config()
+ * - possible pcs_an_restart()
+ * - mac_finish()
+ *
+ * Returns zero on success, or negative errno on failure which will be
+ * reported to the kernel log.
+ */
+int mac_prepare(struct phylink_config *config, unsigned int mode,
+		phy_interface_t iface);
+
 /**
  * mac_config() - configure the MAC for the selected mode and state
  * @config: a pointer to a &struct phylink_config.
@@ -195,6 +247,23 @@ int mac_link_state(struct phylink_config *config,
 void mac_config(struct phylink_config *config, unsigned int mode,
 		const struct phylink_link_state *state);
 
+/**
+ * mac_finish() - finish a to change the PHY interface mode
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @iface: interface mode to switch to
+ *
+ * phylink will call this if it called mac_prepare() to allow the MAC to
+ * complete any necessary steps after the MAC and PCS have been configured
+ * for the @mode and @iface. E.g. a MAC driver may wish to re-enable the
+ * Serdes PHY here if it was previously disabled by mac_prepare().
+ *
+ * Returns zero on success, or negative errno on failure which will be
+ * reported to the kernel log.
+ */
+int mac_finish(struct phylink_config *config, unsigned int mode,
+		phy_interface_t iface);
+
 /**
  * mac_an_restart() - restart 802.3z BaseX autonegotiation
  * @config: a pointer to a &struct phylink_config.
@@ -248,6 +317,132 @@ void mac_link_up(struct phylink_config *config, struct phy_device *phy,
 		 int speed, int duplex, bool tx_pause, bool rx_pause);
 #endif
 
+struct phylink_pcs_ops;
+
+/**
+ * struct phylink_pcs - PHYLINK PCS instance
+ * @ops: a pointer to the &struct phylink_pcs_ops structure
+ * @poll: poll the PCS for link changes
+ *
+ * This structure is designed to be embedded within the PCS private data,
+ * and will be passed between phylink and the PCS.
+ */
+struct phylink_pcs {
+	const struct phylink_pcs_ops *ops;
+	bool poll;
+};
+
+/**
+ * struct phylink_pcs_ops - MAC PCS operations structure.
+ * @pcs_validate: validate the link configuration.
+ * @pcs_get_state: read the current MAC PCS link state from the hardware.
+ * @pcs_config: configure the MAC PCS for the selected mode and state.
+ * @pcs_an_restart: restart 802.3z BaseX autonegotiation.
+ * @pcs_link_up: program the PCS for the resolved link configuration
+ *               (where necessary).
+ */
+struct phylink_pcs_ops {
+	int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported,
+			    const struct phylink_link_state *state);
+	void (*pcs_get_state)(struct phylink_pcs *pcs,
+			      struct phylink_link_state *state);
+	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int mode,
+			  phy_interface_t interface,
+			  const unsigned long *advertising,
+			  bool permit_pause_to_mac);
+	void (*pcs_an_restart)(struct phylink_pcs *pcs);
+	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int mode,
+			    phy_interface_t interface, int speed, int duplex);
+};
+
+#if 0 /* For kernel-doc purposes only. */
+/**
+ * pcs_validate() - validate the link configuration.
+ * @pcs: a pointer to a &struct phylink_pcs.
+ * @supported: ethtool bitmask for supported link modes.
+ * @state: a const pointer to a &struct phylink_link_state.
+ *
+ * Validate the interface mode, and advertising's autoneg bit, removing any
+ * media ethtool link modes that would not be supportable from the supported
+ * mask. Phylink will propagate the changes to the advertising mask. See the
+ * &struct phylink_mac_ops validate() method.
+ *
+ * Returns -EINVAL if the interface mode/autoneg mode is not supported.
+ * Returns non-zero positive if the link state can be supported.
+ */
+int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported,
+		 const struct phylink_link_state *state);
+
+/**
+ * pcs_get_state() - Read the current inband link state from the hardware
+ * @pcs: a pointer to a &struct phylink_pcs.
+ * @state: a pointer to a &struct phylink_link_state.
+ *
+ * Read the current inband link state from the MAC PCS, reporting the
+ * current speed in @state->speed, duplex mode in @state->duplex, pause
+ * mode in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
+ * negotiation completion state in @state->an_complete, and link up state
+ * in @state->link. If possible, @state->lp_advertising should also be
+ * populated.
+ *
+ * When present, this overrides mac_pcs_get_state() in &struct
+ * phylink_mac_ops.
+ */
+void pcs_get_state(struct phylink_pcs *pcs,
+		   struct phylink_link_state *state);
+
+/**
+ * pcs_config() - Configure the PCS mode and advertisement
+ * @pcs: a pointer to a &struct phylink_pcs.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @interface: interface mode to be used
+ * @advertising: adertisement ethtool link mode mask
+ * @permit_pause_to_mac: permit forwarding pause resolution to MAC
+ *
+ * Configure the PCS for the operating mode, the interface mode, and set
+ * the advertisement mask. @permit_pause_to_mac indicates whether the
+ * hardware may forward the pause mode resolution to the MAC.
+ *
+ * When operating in %MLO_AN_INBAND, inband should always be enabled,
+ * otherwise inband should be disabled.
+ *
+ * For SGMII, there is no advertisement from the MAC side, the PCS should
+ * be programmed to acknowledge the inband word from the PHY.
+ *
+ * For 1000BASE-X, the advertisement should be programmed into the PCS.
+ *
+ * For most 10GBASE-R, there is no advertisement.
+ */
+int pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+	       phy_interface_t interface, const unsigned long *advertising,
+	       bool permit_pause_to_mac);
+
+/**
+ * pcs_an_restart() - restart 802.3z BaseX autonegotiation
+ * @pcs: a pointer to a &struct phylink_pcs.
+ *
+ * When PCS ops are present, this overrides mac_an_restart() in &struct
+ * phylink_mac_ops.
+ */
+void pcs_an_restart(struct phylink_pcs *pcs);
+
+/**
+ * pcs_link_up() - program the PCS for the resolved link configuration
+ * @pcs: a pointer to a &struct phylink_pcs.
+ * @mode: link autonegotiation mode
+ * @interface: link &typedef phy_interface_t mode
+ * @speed: link speed
+ * @duplex: link duplex
+ *
+ * This call will be made just before mac_link_up() to inform the PCS of
+ * the resolved link parameters. For example, a PCS operating in SGMII
+ * mode without in-band AN needs to be manually configured for the link
+ * and duplex setting. Otherwise, this should be a no-op.
+ */
+void pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+		 phy_interface_t interface, int speed, int duplex);
+#endif
+
 struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
 			       phy_interface_t iface,
 			       const struct phylink_mac_ops *ops);