/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Author(s): 
 * laj
 *
 * Distributed by: 
 * Silicon Laboratories, Inc
 *
 * This file contains proprietary information.	 
 * No dissemination allowed without prior written permission from
 * Silicon Laboratories, Inc.
 *
 *
 */
#ifndef PROSLIC_API_CFG
#define PROSLIC_API_CFG

/** @defgroup PROSLIC_CFG ProSLIC Configuration Options
 * @{
 */

/** @defgroup PROSLIC_DRIVER_SEL ProSLIC Driver Selection
* Define device driver to be compiled. 
* @{
*/
#ifdef PROSLIC_DOXYGEN
#define SI3217X /**< Define to support Si3217x chipset family in the build */
#undef SI3217X 
#define SI3217X_REVC_ONLY /**< Define to ONLY have Si3217x Rev C support (drop Rev B support) */
#undef SI3217X_REVC_ONLY 
#define SI3217X_REVB_ONLY /**< Define to ONLY have Si3217x Rev B support (drop Rev C support) */
#undef SI3217X_REVB_ONLY 
#define SI3218X /**< Define to support Si3218x chipset family in the build */
#undef SI3218X 
#define SI3219X /**< Define to support Si3219x chipset family in the build */
#undef SI3219X 
#define SI3226X /**< Define to support Si3226x chipset family in the build */
#undef SI3226X 
#define SI3228X /**< Define to support Si3228x chipset family in the build */
#undef SI3228X 
#error DO NOT BUILD WITH PROSLIC_DOXYGEN ENABLED
#endif

/** @} PROSLIC_DRIVER_SEL*/

/** @defgroup CODE_OPTS Code feature options 
 * Select which options NOT to build - just uncomment out the undef to disable feature.
 * @{
 */
#define DISABLE_VERIFY_PATCH      /**< Disable patch load verification */
#undef DISABLE_VERIFY_PATCH 
#define DISABLE_FSK_SETUP         /**< Disable the FSK setup & associated functions */
#undef DISABLE_FSK_SETUP 
#define DISABLE_TONE_SETUP        /**< Disable Tone setup API */
#undef DISABLE_TONE_SETUP 
#define DISABLE_RING_SETUP        /**< Disable Ring setup API */
#undef DISABLE_RING_SETUP  
#define DISABLE_DCFEED_SETUP      /**< Disable DC FEED setup API */
#undef DISABLE_DCFEED_SETUP 
#define DISABLE_GPIO_SETUP        /**< Disable GPIO setup API */
#undef DISABLE_GPIO_SETUP 
#define DISABLE_PCM_SETUP         /**< Disable PCM setup API */
#undef DISABLE_PCM_SETUP 
#define ENABLE_DEBUG              /**< Enable debug messages - function entry, etc. */
/* #undef ENABLE_DEBUG */
#define DISABLE_CI_SETUP          /**< Disable CI Setup */
#undef DISABLE_CI_SETUP 
#define DISABLE_ZSYNTH_SETUP      /**< Disable Zsyth/impedance setup */
#undef DISABLE_ZSYNTH_SETUP  
#define DISABLE_MALLOC            /**< Don't use MALLOC/FREE, instead assume user will statically allocate */
#undef DISABLE_MALLOC 
#define DISABLE_HPF_WIDEBAND      /**< Disable RX and TX HPF when in WIDEBAND mode */
#undef DISABLE_HPF_WIDEBAND
#define PROSLIC_OPTIMIZE_INTERRUPTS /**< Enable optimization for interrupts for dual channel devices.  This
                                         optimization assumes channel number is on even boundaries - that is
                                         0,2,4, are the first channel for each dual channel devices.
                                     */
#define ENABLE_TRACES /**< Enable this to see major API calls during software execution. NOT recommended for production code since it does add code space + can generate compiler warnings. */
#undef ENABLE_TRACES

#define SI_ENABLE_LOGGING  /**< This will enable the ability to log to a file - this assumes the application supports this.  See api_demo for example implementation */
#undef SI_ENABLE_LOGGING 

#define DISABLE_HOOKCHANGE /**< Disable ProSLIC_HookChangeDetect() and associated functions */
#undef DISABLE_HOOKCHANGE

#define DISABLE_PULSEMETERING /**< Disable pulse metering functions */
#undef  DISABLE_PULSEMETERING

/**@} */


#define SIVOICE_NEON_MWI_SUPPORT /**< Enable NEON Message Waiting Indicator support */
#undef SIVOICE_NEON_MWI_SUPPORT

#define GCI_MODE  /**< Set if GCI vs. SPI/PCM mode is to be used */
#undef GCI_MODE  

#define ENABLE_HIRES_GAIN         /**<  Set for zsynth preset gains in dB*10 rather than dB */
#undef  ENABLE_HIRES_GAIN         

#define PRINT_TO_STRING 0         /**< Set this to 1 if printing to a string buffer vs. console - you may change/remove this*/


/** @defgroup MULTI_BOM Multiple Device/BOM Option Support
 * Assign patch structure names to macros used in device drivers
* @{ */
#define SIVOICE_MULTI_BOM_SUPPORT     /**< Enable Multiple General Configuration Support */
#undef SIVOICE_MULTI_BOM_SUPPORT 

#ifdef SIVOICE_MULTI_BOM_SUPPORT
#define SI3217X_PATCH_B_FLBK       si3217xPatchRevBFlbk  /**< Si3217x B Flyback DCDC Converter patch */
#define SI3217X_PATCH_B_BKBT       si3217xPatchRevBBkbt  /**< Si3217x B Buck-boost DCDC Converter patch */
#define SI3217X_PATCH_B_PBB        si3217xPatchRevBBkbt  /**< Si3217x B PMOS Buck-boost DCDC Converter patch */
#define SI3217X_PATCH_B_LCQCUK     si3217xPatchRevBFlbk  /**< Si3217x C Quasi-CUK DCDC Converter patch */
#define SI3217X_PATCH_C_FLBK       si3217xPatchRevCFlbk  /**< Si3217x C Flyback DCDC Converter patch */
#define SI3217X_PATCH_C_BKBT       si3217xPatchRevCFlbk  /**< Si3217x C Buck-boost DCDC Converter patch */
#define SI3217X_PATCH_C_PBB        si3217xPatchRevCFlbk  /**< Si3217x C PMOS Buck-boost DCDC Converter patch */
#define SI3217X_PATCH_C_LCQCUK     si3217xPatchRevCFlbk  /**< Si3217x C Quasi-CUK DCDC Converter patch */

#define SI3218X_PATCH_A            si3218xPatchRevALCQC  /**< Si3218x LCQC 5W DCDC Converter patch */

#define SI3219X_PATCH_A            si3219xPatchRevALCQC  /**< SI3219x patch */

#define SI3226X_PATCH_C_FLBK       si3226xPatchRevCFlbk    /**< Si3226x RevC Flyback DCDC Converter Patch */
#define SI3226X_PATCH_C_CUK        si3226xPatchRevCFlbk    /**< Si3226x RevC Full CUK DCDC Converter Patch */
#define SI3226X_PATCH_C_QCUK       si3226xPatchRevCFlbk    /**< Si3226x RevC Quasi-CUK DCDC Converter Patch */
#define SI3226X_PATCH_C_LCQCUK     si3226xPatchRevCFlbk    /**< Si3226x RevC Low-cost QCUK DCDC Converter Patch */
#define SI3226X_PATCH_C_TSS        si3226xPatchRevCTss     /**< Si3226x RevC TSS DCDC Converter Patch */
#define SI3226X_PATCH_C_TSS_ISO    si3226xPatchRevCTssIso  /**< Si3226x RevC TSS (isolated) DCDC Converter Patch */
#define SI3226X_PATCH_C_PBB        si3226xPatchRevCFlbk    /**< Si3226x PMOS Buck-boost DCDC Converter patch */   
#define SI3226x_PATCH_C_FIXRL      SI3226X_PATCH_C_TSS
#define SI3226X_PATCH_C_QSS        si3226xPatchRevCTss     /**< Si3226x RevC QSS DCDC Converter Patch */
#define SI3226X_PATCH_C_BB         si3226xPatchRevCFlbk    /**< Si3226x BJT Buck-boost DCDC Converter patch */   

#define SI3228X_PATCH_A            si3228xPatchRevALCQC  /**< Si3228x LCQC 5W DCDC Converter patch */

#endif

/* Default patch names for backwards compatibility */
#define SI3217X_PATCH_B_DEFAULT    RevBPatch
#define SI3217X_PATCH_C_DEFAULT    RevCPatch
#define SI3218X_PATCH_A_DEFAULT    RevAPatch
#define SI3219X_PATCH_A_DEFAULT    RevAPatch
#define SI3226X_PATCH_C_DEFAULT    RevCPatch
#define SI3228X_PATCH_A_DEFAULT    RevAPatch

/** @} MULTI_BOM */


#include <linux/module.h>
#define LOGPRINT(...) printk(KERN_ERR __VA_ARGS__)
#ifdef SI_ENABLE_LOGGING

#ifdef PROSLIC_LINUX_KERNEL
#error "Logging currently implemented only for userspace programs."
#endif

extern FILE *SILABS_LOG_FP; /* This global variable would need to be initialized by the user's program - see the api demo for example */
#endif /* SI_ENABLE_LOGGING */

#ifdef ENABLE_DEBUG
#define DEBUG_ENABLED(X) ((X)->debugMode & 1)

#ifdef SI_ENABLE_LOGGING
#define DEBUG_PRINT(CHPTR,...) if( DEBUG_ENABLED(CHPTR) ){ fprintf(SILABS_LOG_FP, __VA_ARGS__); fflush(SILABS_LOG_FP);}
#else
#define DEBUG_PRINT(CHPTR,...) if( DEBUG_ENABLED(CHPTR) ) LOGPRINT(__VA_ARGS__)
#endif /* Logging */

#else /* No Debug */
/* Handled in si_voice.h */
#endif
#define SI_ENABLE_LOGGING
#ifdef ENABLE_TRACES
#define TRACE_ENABLED(X) ((X)->debugMode & 2)

#ifdef SI_ENABLE_LOGGING
#define TRACEPRINT(CHPTR,FMT,...) if(TRACE_ENABLED(CHPTR)) {fprintf(SILABS_LOG_FP, "#TRC:%s channel: %d "FMT,__FUNCTION__, (CHPTR)->channel,__VA_ARGS__); fflush(SILABS_LOG_FP); }
#define TRACEPRINT_NOCHAN(FMT,...) fprintf(SILABS_LOG_FP, "#TRC:%s "FMT,__FUNCTION__, __VA_ARGS__); fflush(SILABS_LOG_FP)
#else
#define TRACEPRINT(CHPTR,FMT,...) if(TRACE_ENABLED(CHPTR)) LOGPRINT("TRC:%s channel: %d "FMT,__FUNCTION__, (CHPTR)->channel,__VA_ARGS__)
#define TRACEPRINT_NOCHAN(FMT,...) LOGPRINT("TRC:%s "FMT,__FUNCTION__, __VA_ARGS__)

#endif /* SI_ENABLE_LOGGING */
#else
/* Handled in si_voice.h */
#endif


/** @defgroup PSTN_CFG PSTN Detection Options
* @{ */
#define PSTN_DET_ENABLE                  /**< Define to include Differential PSTN detection code */
#undef PSTN_DET_ENABLE

#define PSTN_DET_OPEN_FEMF_SETTLE   1500     /**< OPEN foreign voltage measurement settle time */
#define PSTN_DET_DIFF_SAMPLES       4        /**< Number of I/V samples averaged [1 to 16] */
#define PSTN_DET_MIN_ILOOP          700      /**< Minimum acceptable loop current */
#define PSTN_DET_MAX_FEMF           10000    /**< Maximum OPEN state foreign voltage */
#define PSTN_DET_POLL_RATE          10       /**< Rate of re-entrant code in ms */
#define PSTN_DET_DIFF_IV1_SETTLE    1000     /**< Settle time before first I/V measurment in ms */
#define PSTN_DET_DIFF_IV2_SETTLE    1000     /**< Settle time before first I/V measurment in ms */

/** @} PSTN_CFG */
#define SIVOICE_CFG_NEWTYPES_ONLY  1 /**< Set if not supporting Legacy types */


/**@} */
#endif