[][MAC80211][mt76][Add eBF/iBF certification and calibration with golden]
[Description]
Add eBF certification commands with golden device
Add iBF calibration and verification commands with golden device
Add normal mode bf station record and pfmu tag dump command via debugfs
Fix BW display error in debugfs tmac info dump function
[Release-log]
N/A
Change-Id: I992f52b439cfa467e159dbe54285a902087da5db
Reviewed-on: https://gerrit.mediatek.inc/c/openwrt/feeds/mtk_openwrt_feeds/+/6929902
diff --git a/feed/atenl/files/iwpriv.sh b/feed/atenl/files/iwpriv.sh
index d42c32b..949c371 100755
--- a/feed/atenl/files/iwpriv.sh
+++ b/feed/atenl/files/iwpriv.sh
@@ -155,7 +155,10 @@
elif [ "${new_idx}" = "1" ]; then
# raix0 & rai0 becomes raix0
if [[ $interface_ori == "rai"* ]]; then
- new_phy_idx=1
+ # For AX8400 => don't change phy idx
+ if [ ${start_idx_7986} != "1" ]; then
+ new_phy_idx=1
+ fi
# rax0 & ra0 becomes rax0
elif [[ $interface_ori == "ra"* ]]; then
new_phy_idx=$((start_idx_7986+1))
@@ -200,21 +203,24 @@
}
function convert_tx_mode() {
- if [ "$1" = "0" ]; then
+ # Remove leading zeros
+ local tx_mode=$(echo $1 | sed 's/^0*//')
+
+ if [ "$tx_mode" = "0" ]; then
echo "cck"
- elif [ "$1" = "1" ]; then
+ elif [ "$tx_mode" = "1" ]; then
echo "ofdm"
- elif [ "$1" = "2" ]; then
+ elif [ "$tx_mode" = "2" ]; then
echo "ht"
- elif [ "$1" = "4" ]; then
+ elif [ "$tx_mode" = "4" ]; then
echo "vht"
- elif [ "$1" = "8" ]; then
+ elif [ "$tx_mode" = "8" ]; then
echo "he_su"
- elif [ "$1" = "9" ]; then
+ elif [ "$tx_mode" = "9" ]; then
echo "he_er"
- elif [ "$1" = "10" ]; then
+ elif [ "$tx_mode" = "10" ]; then
echo "he_tb"
- elif [ "$1" = "11" ]; then
+ elif [ "$tx_mode" = "11" ]; then
echo "he_mu"
else
echo "undefined"
@@ -305,11 +311,30 @@
local base_chan=1
local control_freq=0
local base_freq=0
+ local band=$(echo $1 | sed s/:/' '/g | cut -d " " -f 2)
+ local temp=$((phy_idx+1))
- if [ -z ${ctrl_band_idx} ]; then
- local band=$(echo $1 | sed s/:/' '/g | cut -d " " -f 2)
- else
- local band=$ctrl_band_idx
+ # Handle ATECTRLBANDIDX
+ if [ ! -z ${ctrl_band_idx} ]; then
+ if [ "${ctrl_band_idx}" == "1" ] && [ ${band} == "0" ]; then
+ local temp=$(cat "/etc/config/wireless"| grep "option band" | sed -n ${temp}p | cut -c 15)
+ if [ "${temp}" == "2" ]; then
+ local band=0
+ elif [ "${temp}" == "5" ]; then
+ local band=1
+ elif [ "${temp}" == "6" ]; then
+ local band=2
+ else
+ echo "iwpriv wrapper band translate error!"
+ fi
+ else
+ # mt7915 in AX8400 case: band should be determined by only the input band
+ if [ "${start_idx_7986}" == "1" ] && [ ${phy_idx} == "0" ]; then
+ local band=$((band))
+ else
+ local band=$((ctrl_band_idx * band))
+ fi
+ fi
fi
if [[ $1 != *":"* ]] || [ "${band}" = "0" ]; then
@@ -625,12 +650,17 @@
case ${cmd} in
"ATETxBfInit")
new_cmd="init"
- new_param=1
+ new_param="1"
+ do_cmd "mt76-test phy${phy_idx} set state=idle"
+ ;;
+ "ATETxBfGdInit")
+ new_cmd="golden_init"
+ new_param="1"
do_cmd "mt76-test phy${phy_idx} set state=idle"
;;
"ATEIBFPhaseComp")
new_cmd="phase_comp"
- new_param="${new_param} aid=1"
+ new_param="${new_param}"
;;
"ATEEBfProfileConfig")
new_cmd="ebf_prof_update"
@@ -670,6 +700,77 @@
"ATEIBFPhaseE2pUpdate")
new_cmd="e2p_update"
;;
+ "ATEIBFPhaseVerify")
+ local group=${new_param:0:2}
+ local group_l_m_h=${new_param:3:2}
+ local band_idx=${new_param:6:2}
+ local phase_cal_type=${new_param:9:2}
+ local LNA_gain_level=${new_param:12:2}
+ local read_from_e2p=${new_param:15:2}
+
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=phase_comp txbf_param=1,${band_idx},${group},${read_from_e2p},0"
+ new_cmd="phase_cal"
+ new_param="${group},${group_l_m_h},${band_idx},${phase_cal_type},${LNA_gain_level}"
+ ;;
+ "TxBfProfileTagRead")
+ new_cmd="pfmu_tag_read"
+ ;;
+ "TxBfProfileTagWrite")
+ new_cmd="pfmu_tag_write"
+ ;;
+ "TxBfProfileTagInValid")
+ new_cmd="set_invalid_prof"
+ ;;
+ "StaRecBfRead")
+ new_cmd="sta_rec_read"
+ ;;
+ "TriggerSounding")
+ new_cmd="trigger_sounding"
+ ;;
+ "StopSounding")
+ new_cmd="stop_sounding"
+ new_param="0"
+ ;;
+ "ATEConTxETxBfGdProc")
+ local tx_rate_mode=$(convert_tx_mode ${new_param:0:2})
+ local tx_rate_idx=${new_param:3:2}
+ local bw=$(echo ${new_param:6:2} | sed 's/^0//')
+ local channel=${new_param:9:3}
+ local channel2=${new_param:13:3}
+ local band=${new_param:17}
+
+ new_cmd="ebf_golden_init"
+ do_ate_work "ATESTART"
+ do_cmd "mt76-test phy${phy_idx} set state=idle"
+ record_config "ATETXBW" ${bw} ${iwpriv_file}
+ convert_channel "${channel}:${band}"
+ if [ "${bw}" = "5" ]; then
+ new_param="1,1"
+ else
+ new_param="1,0"
+ fi
+ do_cmd "mt76-test phy${phy_idx} set tx_rate_mode=${tx_rate_mode} tx_rate_idx=${tx_rate_idx} tx_rate_sgi=0"
+ ;;
+ "ATEConTxETxBfInitProc")
+ local tx_rate_mode=$(convert_tx_mode ${new_param:0:2})
+ local tx_rate_idx=${new_param:3:2}
+ local bw=$(echo ${new_param:6:2} | sed 's/^0//')
+ local tx_rate_nss=${new_param:9:2}
+ local tx_stream=${new_param:12:2}
+ local tx_power=${new_param:15:2}
+ local channel=${new_param:18:3}
+ local channel2=${new_param:22:3}
+ local band=${new_param:26:1}
+ local tx_length=${new_param:28:5}
+
+ new_cmd="ebf_init"
+ do_ate_work "ATESTART"
+ do_cmd "mt76-test phy${phy_idx} set state=idle"
+ record_config "ATETXBW" ${bw} ${iwpriv_file}
+ convert_channel "${channel}:${band}"
+ new_param="1"
+ do_cmd "mt76-test phy${phy_idx} set tx_rate_mode=${tx_rate_mode} tx_rate_idx=${tx_rate_idx} tx_rate_nss=${tx_rate_nss} tx_rate_sgi=0 tx_rate_ldpc=1 tx_power=${tx_power},0,0,0 tx_count=10000000 tx_length=${tx_length} tx_ipg=4"
+ ;;
*)
esac
@@ -677,6 +778,24 @@
if [ "${cmd}" = "ATETxPacketWithBf" ]; then
do_cmd "mt76-test phy${phy_idx} set state=tx_frames"
+ elif [ "${cmd}" = "ATEConTxETxBfInitProc" ]; then
+ do_cmd "mt76-test phy${phy_idx} set aid=1"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=stop_sounding txbf_param=1"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=update_ch txbf_param=1"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=ebf_prof_update txbf_param=0,0,0"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=apply_tx txbf_param=1,1,0,0,0"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=pfmu_tag_read txbf_param=0,1"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=sta_rec_read txbf_param=1"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=trigger_sounding txbf_param=0,1,0,1,0,0,0"
+ do_cmd "mt76-test phy${phy_idx} set txbf_act=trigger_sounding txbf_param=2,1,ff,1,0,0,0"
+ do_cmd "mt76-test phy${phy_idx} set state=rx_frames"
+ elif [ "${cmd}" = "ATEConTxETxBfGdProc" ]; then
+ do_cmd "mt76-test phy${phy_idx} set aid=1"
+ do_cmd "mt76-test phy${phy_idx} set state=rx_frames"
+ elif [ "${cmd}" = "ATETxBfInit" ]; then
+ do_cmd "mt76-test phy${phy_idx} set aid=1"
+ elif [ "${cmd}" = "ATETxBfGdInit" ]; then
+ do_cmd "mt76-test phy${phy_idx} set aid=1"
fi
}
@@ -834,6 +953,9 @@
exit
fi
param_new=${param}
+ if [ "${cmd}" = "ATETXCNT" ] && [ "${param}" = "0" ]; then
+ param_new="10000000"
+ fi
;;
"ATETXANT"|"ATERXANT")
cmd_new="tx_antenna"
@@ -883,9 +1005,11 @@
convert_dfs ${cmd} ${param}
skip=1
;;
- "ATETxBfInit"|"ATEIBFPhaseComp"|"ATEEBfProfileConfig"|"ATEIBfProfileConfig"| \
- "TxBfTxApply"|"ATETxPacketWithBf"|"TxBfProfileData20MAllWrite"|"ATEIBfInstCal"|\
- "ATEIBfGdCal"|"ATEIBFPhaseE2pUpdate")
+ "ATETxBfInit"|"ATETxBfGdInit"|"ATEIBFPhaseComp"|"ATEEBfProfileConfig"|"ATEIBfProfileConfig"| \
+ "TxBfTxApply"|"ATETxPacketWithBf"|"TxBfProfileData20MAllWrite"|"ATEIBfInstCal"| \
+ "ATEIBfGdCal"|"ATEIBFPhaseE2pUpdate"|"TriggerSounding"|"StopSounding"| \
+ "StaRecBfRead"|"TxBfProfileTagInValid"|"TxBfProfileTagWrite"|"TxBfProfileTagRead"| \
+ "ATEIBFPhaseVerify"|"ATEConTxETxBfGdProc"|"ATEConTxETxBfInitProc")
convert_ibf ${cmd} ${param}
skip=1
;;
@@ -913,8 +1037,16 @@
fi
elif [ "${cmd_type}" = "show" ]; then
- do_cmd "mt76-test ${interface} dump"
- do_cmd "mt76-test ${interface} dump stats"
+ if [ "${cmd}" = "wtbl" ]; then
+ wlan_idx=/sys/kernel/debug/ieee80211/phy${phy_idx}/mt76/wlan_idx
+ wtbl_info=/sys/kernel/debug/ieee80211/phy${phy_idx}/mt76/wtbl_info
+
+ do_cmd "echo ${param} > ${wlan_idx}"
+ do_cmd "cat ${wtbl_info}"
+ else
+ do_cmd "mt76-test ${interface} dump"
+ do_cmd "mt76-test ${interface} dump stats"
+ fi
elif [ "${cmd_type}" = "e2p" ]; then
offset=$(printf "0x%s" ${cmd})