reg-tests/ssl/set_ssl_cert_bundle.vtc

#REGTEST_TYPE=broken

# This reg-test uses the "set ssl cert" command to update a multi-certificate
# bundle over the CLI.
# It requires socat to upload the certificate
#
# This regtests loads a multi-certificates bundle "cert1-example.com.pem"
# composed of a .rsa and a .ecdsa
#
# After verifying that the RSA and ECDSA algorithms were avalailble with the
# right certificate, the test changes the certificates and try new requests.
#
# If this test does not work anymore:
# - Check that you have socat
# - Check that you have at least OpenSSL 1.1.0

varnishtest "Test the 'set ssl cert' feature of the CLI with bundles"
#REQUIRE_VERSION=2.3
#REQUIRE_OPTIONS=OPENSSL
feature cmd "command -v socat"
feature ignore_unknown_macro

server s1 -repeat 9 {
  rxreq
  txresp
} -start

haproxy h1 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h1/stats" level admin
        crt-base ${testdir}

    defaults
        mode http
        option httplog
        log stderr local0 debug err
        option logasap
        timeout connect 100ms
        timeout client  1s
        timeout server  1s

    listen clear-lst
        bind "fd@${clearlst}"
        balance roundrobin

        http-response set-header X-SSL-Server-SHA1 %[ssl_s_sha1,hex]

        retries 0 # 2nd SSL connection must fail so skip the retry
        server s1 "${tmpdir}/ssl.sock" ssl verify none sni str(example.com) force-tlsv12 ciphers ECDHE-RSA-AES128-GCM-SHA256
        server s2 "${tmpdir}/ssl.sock" ssl verify none sni str(example.com) force-tlsv12 ciphers ECDHE-ECDSA-AES256-GCM-SHA384

        server s3 "${tmpdir}/ssl.sock" ssl verify none sni str(example.com) force-tlsv12 ciphers ECDHE-RSA-AES128-GCM-SHA256
        server s4 "${tmpdir}/ssl.sock" ssl verify none sni str(example.com) force-tlsv12 ciphers ECDHE-ECDSA-AES256-GCM-SHA384

    listen ssl-lst
        bind "${tmpdir}/ssl.sock" ssl crt ${testdir}/cert1-example.com.pem
        server s1 ${s1_addr}:${s1_port}

} -start


haproxy h1 -cli {
    send "show ssl cert ${testdir}/cert1-example.com.pem.rsa"
    expect ~ ".*SHA1 FingerPrint: 94F720DACA71B8B1A0AC9BD48C65BA688FF047DE"
    send "show ssl cert ${testdir}/cert1-example.com.pem.ecdsa"
    expect ~ ".*SHA1 FingerPrint: C1BA055D452F92EB02D449F0498C289F50698300"
}

client c1 -connect ${h1_clearlst_sock} {
# RSA
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "94F720DACA71B8B1A0AC9BD48C65BA688FF047DE"
    expect resp.status == 200
# ECDSA
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "C1BA055D452F92EB02D449F0498C289F50698300"
    expect resp.status == 200
} -run

shell {
    printf "set ssl cert ${testdir}/cert1-example.com.pem.rsa <<\n$(cat ${testdir}/cert2-example.com.pem.rsa)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl cert ${testdir}/cert1-example.com.pem.rsa" | socat "${tmpdir}/h1/stats" -
    printf "set ssl cert ${testdir}/cert1-example.com.pem.ecdsa <<\n$(cat ${testdir}/cert2-example.com.pem.ecdsa)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl cert ${testdir}/cert1-example.com.pem.ecdsa" | socat "${tmpdir}/h1/stats" -
}

haproxy h1 -cli {
    send "show ssl cert ${testdir}/cert1-example.com.pem.rsa"
    expect ~ ".*SHA1 FingerPrint: ADC863817FC40C2A9CA913CE45C9A92232558F90"
    send "show ssl cert ${testdir}/cert1-example.com.pem.ecdsa"
    expect ~ ".*SHA1 FingerPrint: F49FFA446D072262445C197B85D2F400B3F58808"
}

client c1 -connect ${h1_clearlst_sock} {
# RSA
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "ADC863817FC40C2A9CA913CE45C9A92232558F90"
    expect resp.status == 200
# ECDSA
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "F49FFA446D072262445C197B85D2F400B3F58808"
    expect resp.status == 200
} -run