| varnishtest "Health-check test" |
| feature ignore_unknown_macro |
| |
| #REQUIRE_VERSION=2.4 |
| #EXCLUDE_TARGETS=freebsd |
| #REGTEST_TYPE=slow |
| |
| # This script test health-checks for four backends with one server by backend. |
| # A syslog server is attached to each backend to check the syslog messages |
| # in the right order. |
| |
| # First, we check a health-check has passed for all the servers thanks to the syslog |
| # messages. Then each server is disabled. The health-check status are checked. |
| # Then each server is re-enabled. Finally health-check status |
| # verifications for each server terminate the execution of this script. |
| |
| # Note that the CLI is synchronized with the syslog servers so that |
| # to be sure to receive the passed health-checks status messages before |
| # disabling the servers. Same thing, when we check that the servers are down |
| # before enabling the servers. |
| |
| # Cyclic barrier to synchronize the CLI with the syslog servers |
| barrier b1 cond 5 -cyclic |
| |
| # These servers are there only for the health-check test. |
| server s1 { |
| } -start |
| |
| server s2 { |
| } -start |
| |
| server s3 { |
| } -start |
| |
| server s4 { |
| } -start |
| |
| syslog S1 -level notice { |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be1/srv1 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP" |
| barrier b1 sync |
| recv alert |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Server be1/srv1 is going DOWN for maintenance. 0 active and 0 backup servers left. [01] sessions active, 0 requeued, 0 remaining in queue." |
| recv emerg |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: backend be1 has no server available!" |
| barrier b1 sync |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: (Server be1/srv1 is UP/READY \\(leaving forced maintenance\\).|Health check for server be1/srv1 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP)" |
| barrier b1 sync |
| } -start |
| |
| syslog S2 -level notice { |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be2/srv2 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP" |
| barrier b1 sync |
| recv alert |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Server be2/srv2 is going DOWN for maintenance. 0 active and 0 backup servers left. [01] sessions active, 0 requeued, 0 remaining in queue." |
| recv emerg |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: backend be2 has no server available!" |
| barrier b1 sync |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: (Server be2/srv2 is UP/READY \\(leaving forced maintenance\\).|Health check for server be2/srv2 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP)" |
| barrier b1 sync |
| } -start |
| |
| syslog S3 -level notice { |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be3/srv3 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP" |
| barrier b1 sync |
| recv alert |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Server be3/srv3 is going DOWN for maintenance. 0 active and 0 backup servers left. [01] sessions active, 0 requeued, 0 remaining in queue." |
| recv emerg |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: backend be3 has no server available!" |
| barrier b1 sync |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: (Server be3/srv3 is UP/READY \\(leaving forced maintenance\\).|Health check for server be3/srv3 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP)" |
| barrier b1 sync |
| } -start |
| |
| syslog S4 -level notice { |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be4/srv4 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP" |
| barrier b1 sync |
| recv alert |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Server be4/srv4 is going DOWN for maintenance. 0 active and 0 backup servers left. [01] sessions active, 0 requeued, 0 remaining in queue." |
| recv emerg |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: backend be4 has no server available!" |
| barrier b1 sync |
| recv |
| expect ~ "[^:\\[ ]\\[${h1_pid}\\]: (Server be4/srv4 is UP/READY \\(leaving forced maintenance\\).|Health check for server be4/srv4 succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP)" |
| barrier b1 sync |
| } -start |
| |
| |
| haproxy h1 -conf { |
| defaults |
| timeout client "${HAPROXY_TEST_TIMEOUT-5s}" |
| timeout server "${HAPROXY_TEST_TIMEOUT-5s}" |
| timeout connect "${HAPROXY_TEST_TIMEOUT-5s}" |
| default-server check inter 200ms downinter 100s rise 1 fall 1 |
| |
| frontend fe1 |
| bind "fd@${fe1}" |
| use_backend be1 |
| |
| frontend fe2 |
| bind "fd@${fe2}" |
| use_backend be2 |
| |
| frontend fe3 |
| bind "fd@${fe3}" |
| use_backend be3 |
| |
| frontend fe4 |
| bind "fd@${fe4}" |
| use_backend be4 |
| |
| backend be1 |
| option log-health-checks |
| log ${S1_addr}:${S1_port} daemon |
| server srv1 ${s1_addr}:${s1_port} |
| |
| backend be2 |
| option log-health-checks |
| log ${S2_addr}:${S2_port} daemon |
| server srv2 ${s2_addr}:${s2_port} |
| |
| backend be3 |
| option log-health-checks |
| log ${S3_addr}:${S3_port} daemon |
| server srv3 ${s3_addr}:${s3_port} |
| |
| backend be4 |
| option log-health-checks |
| log ${S4_addr}:${S4_port} daemon |
| server srv4 ${s4_addr}:${s4_port} |
| } -start |
| |
| haproxy h1 -cli { |
| barrier b1 sync |
| send "show servers state" |
| expect ~ "# be_id be_name srv_id srv_name srv_addr srv_op_state srv_admin_state srv_uweight srv_iweight srv_time_since_last_change srv_check_status srv_check_result srv_check_health srv_check_state srv_agent_state bk_f_forced_id srv_f_forced_id srv_fqdn srv_port srvrecord srv_use_ssl srv_check_port srv_check_addr srv_agent_addr srv_agent_port\n6 be1 1 srv1 ${s1_addr} 2 0 1 1 [[:digit:]]+ 6 3 1 [67] 0 0 0 - ${s1_port} - 0 0 - - 0\n7 be2 1 srv2 ${s2_addr} 2 0 1 1 [[:digit:]]+ 6 3 1 [67] 0 0 0 - ${s2_port} - 0 0 - - 0\n8 be3 1 srv3 ${s3_addr} 2 0 1 1 [[:digit:]]+ 6 3 1 [67] 0 0 0 - ${s3_port} - 0 0 - - 0\n9 be4 1 srv4 ${s4_addr} 2 0 1 1 [[:digit:]]+ 6 3 1 [67] 0 0 0 - ${s4_port} - 0 0 - - 0" |
| } |
| |
| haproxy h1 -cli { |
| send "disable server be1/srv1" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "disable server be2/srv2" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "disable server be3/srv3" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "disable server be4/srv4" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| barrier b1 sync |
| send "show servers state" |
| expect ~ "# be_id be_name srv_id srv_name srv_addr srv_op_state srv_admin_state srv_uweight srv_iweight srv_time_since_last_change srv_check_status srv_check_result srv_check_health srv_check_state srv_agent_state bk_f_forced_id srv_f_forced_id srv_fqdn srv_port srvrecord srv_use_ssl srv_check_port srv_check_addr srv_agent_addr srv_agent_port\n6 be1 1 srv1 ${s1_addr} 0 1 1 1 [[:digit:]]+ 6 3 [01] 1[45] 0 0 0 - ${s1_port} - 0 0 - - 0\n7 be2 1 srv2 ${s2_addr} 0 1 1 1 [[:digit:]]+ 6 3 [01] 1[45] 0 0 0 - ${s2_port} - 0 0 - - 0\n8 be3 1 srv3 ${s3_addr} 0 1 1 1 [[:digit:]]+ 6 3 [01] 1[45] 0 0 0 - ${s3_port} - 0 0 - - 0\n9 be4 1 srv4 ${s4_addr} 0 1 1 1 [[:digit:]]+ 6 3 [01] 1[45] 0 0 0 - ${s4_port} - 0 0 - - 0" |
| } |
| |
| haproxy h1 -cli { |
| send "enable server be1/srv1" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "enable server be2/srv2" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "enable server be3/srv3" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| send "enable server be4/srv4" |
| expect ~ .* |
| } |
| |
| haproxy h1 -cli { |
| barrier b1 sync |
| send "show servers state" |
| expect ~ "# be_id be_name srv_id srv_name srv_addr srv_op_state srv_admin_state srv_uweight srv_iweight srv_time_since_last_change srv_check_status srv_check_result srv_check_health srv_check_state srv_agent_state bk_f_forced_id srv_f_forced_id srv_fqdn srv_port srvrecord srv_use_ssl srv_check_port srv_check_addr srv_agent_addr srv_agent_port\n6 be1 1 srv1 ${s1_addr} 2 0 1 1 [[:digit:]]+ 6 [03] 1 [67] 0 0 0 - ${s1_port} - 0 0 - - 0\n7 be2 1 srv2 ${s2_addr} 2 0 1 1 [[:digit:]]+ 6 [03] 1 [67] 0 0 0 - ${s2_port} - 0 0 - - 0\n8 be3 1 srv3 ${s3_addr} 2 0 1 1 [[:digit:]]+ 6 [03] 1 [67] 0 0 0 - ${s3_port} - 0 0 - - 0\n9 be4 1 srv4 ${s4_addr} 2 0 1 1 [[:digit:]]+ 6 [03] 1 [67] 0 0 0 - ${s4_port} - 0 0 - - 0" |
| } |
| |
| syslog S1 -wait |
| syslog S2 -wait |
| syslog S3 -wait |
| syslog S4 -wait |
| |