MINOR: mux-h1: Split H1C_F_WAIT_OPPOSITE flag to separate input/output sides
The H1C_F_WAIT_OPPOSITE flag is now splitted in 2 flags, H1C_F_WAIT_INPUT
and H1C_F_WAIT_OUTPUT, depending on the side is waiting. The change is a
prerequisite to fix the tunnel mode management in HTTP muxes.
H1C_F_WAIT_INPUT must be used to bloc the output side and to wait for an
event from the input side. H1C_F_WAIT_OUTPUT does the opposite. It bloc the
input side and wait for an event from the output side.
diff --git a/src/mux_h1.c b/src/mux_h1.c
index 00bb6dc..aad155a 100644
--- a/src/mux_h1.c
+++ b/src/mux_h1.c
@@ -56,15 +56,16 @@
#define H1C_F_ST_ALIVE (H1C_F_ST_IDLE|H1C_F_ST_EMBRYONIC|H1C_F_ST_ATTACHED)
/* 0x00004000 - 0x00008000 unused */
-#define H1C_F_WAIT_OPPOSITE 0x00010000 /* Don't read more data for now, waiting sync with opposite side */
-#define H1C_F_WANT_SPLICE 0x00020000 /* Don't read into a buffer because we want to use or we are using splicing */
-#define H1C_F_ERR_PENDING 0x00040000 /* Send an error and close the connection ASAP (implies H1C_F_ST_ERROR) */
-#define H1C_F_WAIT_NEXT_REQ 0x00080000 /* waiting for the next request to start, use keep-alive timeout */
-#define H1C_F_UPG_H2C 0x00100000 /* set if an upgrade to h2 should be done */
-#define H1C_F_CO_MSG_MORE 0x00200000 /* set if CO_SFL_MSG_MORE must be set when calling xprt->snd_buf() */
-#define H1C_F_CO_STREAMER 0x00400000 /* set if CO_SFL_STREAMER must be set when calling xprt->snd_buf() */
-/* 0x00800000 - 0x40000000 unused */
+#define H1C_F_WANT_SPLICE 0x00010000 /* Don't read into a buffer because we want to use or we are using splicing */
+#define H1C_F_ERR_PENDING 0x00020000 /* Send an error and close the connection ASAP (implies H1C_F_ST_ERROR) */
+#define H1C_F_WAIT_NEXT_REQ 0x00040000 /* waiting for the next request to start, use keep-alive timeout */
+#define H1C_F_UPG_H2C 0x00080000 /* set if an upgrade to h2 should be done */
+#define H1C_F_CO_MSG_MORE 0x00100000 /* set if CO_SFL_MSG_MORE must be set when calling xprt->snd_buf() */
+#define H1C_F_CO_STREAMER 0x00200000 /* set if CO_SFL_STREAMER must be set when calling xprt->snd_buf() */
+#define H1C_F_WAIT_OUTPUT 0x00400000 /* Don't read more data for now, waiting sync with output side */
+#define H1C_F_WAIT_INPUT 0x00800000 /* Don't send more data for now, waiting sync with input side */
+/* 0x01000000 - 0x40000000 unusued*/
#define H1C_F_IS_BACK 0x80000000 /* Set on outgoing connection */
/*
@@ -390,8 +391,8 @@
return 0;
}
- if (h1c->flags & H1C_F_WAIT_OPPOSITE) {
- TRACE_DEVEL("recv not allowed (wait_opposite)", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn);
+ if (h1c->flags & H1C_F_WAIT_OUTPUT) {
+ TRACE_DEVEL("recv not allowed (wait_output)", H1_EV_H1C_RECV|H1_EV_H1C_BLK, h1c->conn);
return 0;
}
@@ -737,8 +738,8 @@
h1_release_buf(h1c, &h1s->rxbuf);
- h1c->flags &= ~(H1C_F_WAIT_OPPOSITE|H1C_F_WANT_SPLICE|H1C_F_ST_EMBRYONIC|
- H1C_F_ST_ATTACHED|H1C_F_ST_READY|
+ h1c->flags &= ~(H1C_F_WAIT_INPUT|H1C_F_WAIT_OUTPUT|H1C_F_WANT_SPLICE|
+ H1C_F_ST_EMBRYONIC|H1C_F_ST_ATTACHED|H1C_F_ST_READY|
H1C_F_OUT_FULL|H1C_F_OUT_ALLOC|H1C_F_IN_SALLOC|
H1C_F_CO_MSG_MORE|H1C_F_CO_STREAMER);
if (h1s->flags & H1S_F_ERROR) {
@@ -801,7 +802,7 @@
h1c->idle_exp = TICK_ETERNITY;
if (conn_is_back(conn)) {
- h1c->flags |= (H1C_F_IS_BACK|H1C_F_WAIT_OPPOSITE);
+ h1c->flags |= (H1C_F_IS_BACK|H1C_F_WAIT_OUTPUT);
h1c->shut_timeout = h1c->timeout = proxy->timeout.server;
if (tick_isset(proxy->timeout.serverfin))
h1c->shut_timeout = proxy->timeout.serverfin;
@@ -1282,12 +1283,12 @@
if (!(h1s->h1c->flags & H1C_F_IS_BACK)) {
h1s->flags &= ~H1S_F_PARSING_DONE;
if (h1s->res.state < H1_MSG_DONE) {
- h1s->h1c->flags |= H1C_F_WAIT_OPPOSITE;
- TRACE_STATE("Disable read on h1c (wait_opposite)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s);
+ h1s->h1c->flags |= H1C_F_WAIT_OUTPUT;
+ TRACE_STATE("Disable read on h1c (wait_output)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s);
}
}
- else if (h1s->h1c->flags & H1C_F_WAIT_OPPOSITE) {
- h1s->h1c->flags &= ~H1C_F_WAIT_OPPOSITE;
+ else if (h1s->h1c->flags & H1C_F_WAIT_OUTPUT) {
+ h1s->h1c->flags &= ~H1C_F_WAIT_OUTPUT;
tasklet_wakeup(h1s->h1c->wait_event.tasklet);
TRACE_STATE("Re-enable read on h1c", H1_EV_RX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1s->h1c->conn, h1s);
}
@@ -1314,8 +1315,8 @@
* it in tunnel mode.
*/
if (h1s->req.state < H1_MSG_DONE) {
- h1s->h1c->flags |= H1C_F_WAIT_OPPOSITE;
- TRACE_STATE("Disable read on h1c (wait_opposite)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s);
+ h1s->h1c->flags |= H1C_F_WAIT_OUTPUT;
+ TRACE_STATE("Disable read on h1c (wait_output)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1s->h1c->conn, h1s);
}
else if (h1s->status == 101 && h1s->req.state == H1_MSG_DONE) {
h1s->req.flags &= ~(H1_MF_XFER_LEN|H1_MF_CLEN|H1_MF_CHNK);
@@ -1323,8 +1324,8 @@
TRACE_STATE("switch H1 request in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1s->h1c->conn, h1s);
}
}
- else if (h1s->h1c->flags & H1C_F_WAIT_OPPOSITE) {
- h1s->h1c->flags &= ~H1C_F_WAIT_OPPOSITE;
+ else if (h1s->h1c->flags & H1C_F_WAIT_OUTPUT) {
+ h1s->h1c->flags &= ~H1C_F_WAIT_OUTPUT;
tasklet_wakeup(h1s->h1c->wait_event.tasklet);
TRACE_STATE("Re-enable read on h1c", H1_EV_RX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1s->h1c->conn, h1s);
}
@@ -1552,13 +1553,19 @@
if (!(h1m->flags & H1_MF_RESP) && h1s->status == 101)
h1_set_req_tunnel_mode(h1s);
- else if (h1s->req.state < H1_MSG_DONE || h1s->res.state < H1_MSG_DONE) {
- h1c->flags |= H1C_F_WAIT_OPPOSITE;
- TRACE_STATE("Disable read on h1c (wait_opposite)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1c->conn, h1s);
+ else {
+ if (h1s->req.state < H1_MSG_DONE || h1s->res.state < H1_MSG_DONE) {
+ /* Unfinished transaction: block this input side waiting the end of the output side */
+ h1c->flags |= H1C_F_WAIT_OUTPUT;
+ TRACE_STATE("Disable read on h1c (wait_output)", H1_EV_RX_DATA|H1_EV_H1C_BLK, h1c->conn, h1s);
+ }
+ if (h1s->h1c->flags & H1C_F_WAIT_INPUT) {
+ h1s->h1c->flags &= ~H1C_F_WAIT_INPUT;
+ h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_SEND, &h1c->wait_event);
+ TRACE_STATE("Re-enable send on h1c", H1_EV_TX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn, h1s);
+ }
break;
}
- else
- break;
}
else if (h1m->state == H1_MSG_TUNNEL) {
TRACE_PROTO("parsing tunneled data", H1_EV_RX_DATA, h1c->conn, h1s);
@@ -1658,6 +1665,12 @@
}
else if (h1m->state > H1_MSG_LAST_LF && h1m->state < H1_MSG_DONE)
h1s->cs->flags |= CS_FL_ERROR;
+
+ if (h1s->h1c->flags & H1C_F_WAIT_INPUT) {
+ h1s->h1c->flags &= ~H1C_F_WAIT_INPUT;
+ h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_SEND, &h1c->wait_event);
+ TRACE_STATE("Re-enable send on h1c", H1_EV_TX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn, h1s);
+ }
}
}
@@ -1797,8 +1810,8 @@
if (sl->flags & HTX_SL_F_BODYLESS)
h1m->flags |= H1_MF_CLEN;
h1m->state = H1_MSG_HDR_FIRST;
- if (h1c->flags & H1C_F_WAIT_OPPOSITE) {
- h1c->flags &= ~H1C_F_WAIT_OPPOSITE;
+ if (h1c->flags & H1C_F_WAIT_OUTPUT) {
+ h1c->flags &= ~H1C_F_WAIT_OUTPUT;
h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event);
TRACE_STATE("Re-enable read on h1c", H1_EV_TX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn, h1s);
}
@@ -2057,8 +2070,8 @@
h1_set_req_tunnel_mode(h1s);
TRACE_STATE("switch H1 request in tunnel mode", H1_EV_TX_DATA|H1_EV_TX_HDRS, h1c->conn, h1s);
}
- else if (h1s->h1c->flags & H1C_F_WAIT_OPPOSITE) {
- h1s->h1c->flags &= ~H1C_F_WAIT_OPPOSITE;
+ else if (h1s->h1c->flags & H1C_F_WAIT_OUTPUT) {
+ h1s->h1c->flags &= ~H1C_F_WAIT_OUTPUT;
h1c->conn->xprt->subscribe(h1c->conn, h1c->conn->xprt_ctx, SUB_RETRY_RECV, &h1c->wait_event);
TRACE_STATE("Re-enable read on h1c", H1_EV_TX_DATA|H1_EV_H1C_BLK|H1_EV_H1C_WAKE, h1c->conn, h1s);
}
@@ -2438,7 +2451,7 @@
}
end:
- if (!(h1c->flags & H1C_F_OUT_FULL))
+ if (!(h1c->flags & (H1C_F_OUT_FULL|H1C_F_WAIT_INPUT)))
h1_wake_stream_for_send(h1c->h1s);
/* We're done, no more to send */