diff --git a/contrib/modsecurity/Makefile b/contrib/modsecurity/Makefile
new file mode 100644
index 0000000..72956f9
--- /dev/null
+++ b/contrib/modsecurity/Makefile
@@ -0,0 +1,45 @@
+DESTDIR    =
+PREFIX     = /usr/local
+BINDIR     = $(PREFIX)/bin
+
+CC = gcc
+LD = $(CC)
+
+ifeq ($(MODSEC_INC),)
+MODSEC_INC := modsecurity-2.9.1/INSTALL/include
+endif
+
+ifeq ($(MODSEC_LIB),)
+MODSEC_LIB := modsecurity-2.9.1/INSTALL/lib
+endif
+
+ifeq ($(APACHE2_INC),)
+APACHE2_INC := /usr/include/apache2
+endif
+
+ifeq ($(APR_INC),)
+APR_INC := /usr/include/apr-1.0
+endif
+
+ifeq ($(LIBXML_INC),)
+LIBXML_INC := /usr/include/libxml2
+endif
+
+CFLAGS  = -g -Wall -pthread
+LDFLAGS = -lpthread  -levent -levent_pthreads -lcurl -lapr-1 -laprutil-1 -lxml2 -lpcre -lyajl
+INCS += -I../../include -I../../ebtree -I$(MODSEC_INC) -I$(APACHE2_INC) -I$(APR_INC) -I$(LIBXML_INC)
+LIBS =
+
+OBJS = spoa.o modsec_wrapper.o
+
+modsecurity: $(OBJS)
+	$(LD) $(LDFLAGS) $(LIBS) -o $@ $^ $(MODSEC_LIB)/standalone.a
+
+install: modsecurity
+	install modsecurity $(DESTDIR)$(BINDIR)
+
+clean:
+	rm -f modsecurity $(OBJS)
+
+%.o:	%.c
+	$(CC) $(CFLAGS) $(INCS) -c -o $@ $<
diff --git a/contrib/modsecurity/README b/contrib/modsecurity/README
new file mode 100644
index 0000000..21ff37e
--- /dev/null
+++ b/contrib/modsecurity/README
@@ -0,0 +1,132 @@
+ModSecurity for HAProxy
+-----------------------
+
+This is a third party deamon whoch speaks SPOE. It give requests send by HAProxy
+to ModSecurity and returns the verdict.
+
+  Compilation
+---------------
+
+You must compile ModSecurity in standalone mode. Below an example for
+ModSecurity-2.9.1. Note that ModSecurity depends the Apache APR. I assume that
+the Apache dependencies are installed on the system.
+
+   ./configure \
+      --prefix=$PWD/INSTALL \
+		--disable-apache2-module \
+      --enable-standalone-module \
+      --enable-pcre-study \
+      --without-lua \
+      --enable-pcre-jit
+   make
+	make -C standalone install
+	mkdir -p $PWD/INSTALL/include
+	cp standalone/*.h $PWD/INSTALL/include
+	cp apache2/*.h $PWD/INSTALL/include
+
+Note that this compilation method works, but is a litle bit rustic. I cant
+deal with Lua, I supposed that is a dependecies problem on my computer.
+
+  Start the service
+---------------------
+
+After you have compiled it, to start the service, you just need to use "spoa"
+binary:
+
+    $> ./modsecurity  -h
+    Usage: ./spoa [-h] [-d] [-p <port>] [-n <num-workers>] [-f <config-file>]
+        -h                  Print this message
+        -d                  Enable the debug mode
+        -f <config-file>    Modsecurity configuration file
+        -m <max-frame-size> Specify the maximum frame size (default : 16384)
+        -p <port>           Specify the port to listen on (default: 12345)
+        -n <num-workers>    Specify the number of workers (default: 5)
+        -c <capability>     Enable the support of the specified capability
+        -t <time>           Set a delay to process a message (default: 0)
+                            The value is specified in milliseconds by default,
+                            but can be in any other unit if the number is suffixed
+                            by a unit (us, ms, s)
+
+Note: A worker is a thread.
+
+
+  Configure a SPOE to use the service
+---------------------------------------
+
+All information about SPOE configuration can be found in "doc/SPOE.txt". Here is
+the configuration template to use for your SPOE with ModSecurity module:
+
+   [modsecurity]
+
+   spoe-agent modsecurity-agent
+      messages check-request
+      option var-prefix modsec
+      timeout hello      100ms
+      timeout idle       30s
+      timeout processing 15ms
+      use-backend spoe-modsecurity
+
+   spoe-message check-request
+      args unique-id method path query req.ver req.hdrs_bin req.body_size req.body
+      event on-frontend-http-request
+
+The engine is in the scope "modsecurity". So to enable it, you must set the
+following line in a frontend/listener section:
+
+   frontend my-front
+      ...
+      filter spoe engine modsecurity config spoe-modsecurity.conf
+      ...
+
+
+Because, in SPOE configuration file, we declare to use the backend
+"spoe-modsecurity" to communicate with the service, you must define it in
+HAProxy configuration. For example:
+
+   backend spoe-modsecurity
+      mode tcp
+      balance roundrobin
+      timeout connect 5s
+      timeout server  3m
+      server iprep1 127.0.0.1:12345
+
+The modsecurity action is returned in a variable called txn.modsec.code. It
+contains the HTTP returned code. If the variable contains 0, the request is
+clean.
+
+   tcp-request content reject if { var(txn.modsec.code) -m int gt 0 }
+
+With this rule, all the request not clean are reected.
+
+
+  Known bugs, limitations and TODO list
+-----------------------------------------
+
+Modsecurity bugs:
+-----------------
+
+* When the audit_log is used with the directive "SecAuditLogType Serial", in
+  some systems, the APR mutex initialisation silently fails, this causes a
+  segmentation fault. For my own usage, I have a patched version of modsec where
+  I use another mutex than "APR_LOCK_DEFAULT" like "APR_LOCK_PROC_PTHREAD"
+
+   -    rc = apr_global_mutex_create(&msce->auditlog_lock, NULL, APR_LOCK_DEFAULT, mp);
+   +    rc = apr_global_mutex_create(&msce->auditlog_lock, NULL, APR_LOCK_PROC_PTHREAD, mp);
+
+* Configuration file loaded with wilcard (eg. Include rules/*.conf), are loaded
+  in reverse alphabetical order. You can found a patch below. The ModSecurity
+  team ignored this patch.
+
+  https://github.com/SpiderLabs/ModSecurity/issues/1285
+  http://www.arpalert.org/0001-Fix-bug-when-load-files.patch
+
+  Or insert includes without wildcards.
+
+Todo:
+-----
+
+* Clarify the partial body analysis.
+* The response body is not yet analyzed.
+* ModSecurity can't modify the response body.
+* Implements real log management. Actually, the log are sent on stderr.
+* Implements daemon things (forks, write a pid, etc.).
diff --git a/contrib/modsecurity/modsec_wrapper.c b/contrib/modsecurity/modsec_wrapper.c
new file mode 100644
index 0000000..8927b5b
--- /dev/null
+++ b/contrib/modsecurity/modsec_wrapper.c
@@ -0,0 +1,639 @@
+/*
+ * Modsecurity wrapper for haproxy
+ *
+ * This file contains the wrapper which sends data in ModSecurity
+ * and returns the verdict.
+ *
+ * Copyright 2016 OZON, Thierry Fournier <thierry.fournier@ozon.io>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <limits.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#include <common/time.h>
+
+#include <types/global.h>
+#include <types/stream.h>
+
+#include <proto/arg.h>
+#include <proto/hdr_idx.h>
+#include <proto/hlua.h>
+#include <proto/log.h>
+#include <proto/proto_http.h>
+#include <proto/spoe.h>
+
+#include <api.h>
+
+#include "modsec_wrapper.h"
+#include "spoa.h"
+
+static char host_name[60];
+
+/* Note: The document and the code of "apr_table_make" considers
+ * that this function doesn't fails. The Apache APR code says
+ * other thing. If the system doesn't have any more memory, a
+ * a segfault occurs :(. Be carrefull with this module.
+ */
+
+struct directory_config *modsec_config = NULL;
+static server_rec *modsec_server = NULL;
+
+struct apr_bucket_haproxy {
+	apr_bucket_refcount refcount;
+	char *buffer;
+	size_t length;
+};
+
+static void haproxy_bucket_destroy(void *data)
+{
+	struct apr_bucket_haproxy *bucket = data;
+
+	if (apr_bucket_shared_destroy(bucket))
+		apr_bucket_free(bucket);
+}
+
+static apr_status_t haproxy_bucket_read(apr_bucket *bucket, const char **str,
+                                        apr_size_t *len, apr_read_type_e block)
+{
+	struct apr_bucket_haproxy *data = bucket->data;
+
+	if (bucket->start) {
+		*str = NULL;
+		*len = 0;
+		return APR_SUCCESS;
+	}
+
+	*str = data->buffer;
+	*len = data->length;
+	bucket->start = 1; /* Just a flag to say that the read is started */
+
+	return APR_SUCCESS;
+}
+
+static const apr_bucket_type_t apr_bucket_type_haproxy = {
+	"HAProxy", 7, APR_BUCKET_DATA,
+	haproxy_bucket_destroy,
+	haproxy_bucket_read,
+	apr_bucket_setaside_noop,
+	apr_bucket_shared_split,
+	apr_bucket_shared_copy
+};
+
+static char *chunk_strdup(struct request_rec *req, const char *str, size_t len)
+{
+	char *out;
+
+	out = apr_pcalloc(req->pool, len + 1);
+	if (!out)
+		return NULL;
+	memcpy(out, str, len);
+	out[len] = '\0';
+	return out;
+}
+
+static char *printf_dup(struct request_rec *req, char *fmt, ...)
+{
+	char *out;
+	va_list ap;
+	int len;
+
+	va_start(ap, fmt);
+	len = vsnprintf(NULL, 0, fmt, ap);
+	if (len == -1)
+		return NULL;
+	va_end(ap);
+
+	out = apr_pcalloc(req->pool, len + 1);
+	if (!out)
+		return NULL;
+
+	va_start(ap, fmt);
+	len = vsnprintf(out, len + 1, fmt, ap);
+	if (len == -1)
+		return NULL;
+	va_end(ap);
+
+	return out;
+}
+
+/* This function send logs. For now, it do nothing. */
+static void modsec_log(void *obj, int level, char *str)
+{
+	LOG(&null_worker, "%s", str);
+}
+
+/* This fucntion load the ModSecurity file. It returns -1 if the
+ * initialisation fails.
+ */
+int modsecurity_load(const char *file)
+{
+	const char *msg;
+	char cwd[128];
+
+	/* Initialises modsecurity. */
+
+	modsec_server = modsecInit();
+	if (modsec_server == NULL) {
+		LOG(&null_worker, "ModSecurity initilisation failed.\n");
+		return -1;
+	}
+
+	modsecSetLogHook(NULL, modsec_log);
+
+	gethostname(host_name, 60);
+	modsec_server->server_hostname = host_name;
+
+	modsecStartConfig();
+
+	modsec_config = modsecGetDefaultConfig();
+	if (modsec_config == NULL) {
+		LOG(&null_worker, "ModSecurity default configuration initilisation failed.\n");
+		return -1;
+	}
+
+	msg = modsecProcessConfig(modsec_config, file, getcwd(cwd, 128));
+	if (msg != NULL) {
+		LOG(&null_worker, "ModSecurity load configuration failed.\n");
+		return -1;
+	}
+
+	modsecFinalizeConfig();
+
+	modsecInitProcess();
+
+	return 1;
+}
+
+struct modsec_hdr {
+	const char *name;
+	uint64_t name_len;
+	const char *value;
+	uint64_t value_len;
+};
+
+int modsecurity_process(struct worker *worker, struct modsecurity_parameters *params)
+{
+	struct conn_rec *cr;
+	struct request_rec *req;
+	struct apr_bucket_brigade *brigade;
+	struct apr_bucket *link_bucket;
+	struct apr_bucket_haproxy *data_bucket;
+	struct apr_bucket *last_bucket;
+	int i;
+	long clength;
+	char *err;
+	int fail;
+	const char *lang;
+	char *name, *value;
+	// int body_partial;
+	struct timeval now;
+	int ret;
+	char *buf;
+	char *end;
+	const char *uniqueid;
+	uint64_t uniqueid_len;
+	const char *meth;
+	uint64_t meth_len;
+	const char *path;
+	uint64_t path_len;
+	const char *qs;
+	uint64_t qs_len;
+	const char *vers;
+	uint64_t vers_len;
+	const char *body;
+	uint64_t body_len;
+	uint64_t body_exposed_len;
+	uint64_t hdr_nb;
+	struct modsec_hdr hdrs[255];
+	struct modsec_hdr hdr;
+	int status;
+	int return_code = -1;
+
+	/* Decode uniqueid. */
+	uniqueid = params->uniqueid.data.u.str.str;
+	uniqueid_len = params->uniqueid.data.u.str.len;
+
+	/* Decode method. */
+	meth = params->method.data.u.str.str;
+	meth_len = params->method.data.u.str.len;
+
+	/* Decode path. */
+	path = params->path.data.u.str.str;
+	path_len = params->path.data.u.str.len;
+
+	/* Decode query string. */
+	qs = params->query.data.u.str.str;
+	qs_len = params->query.data.u.str.len;
+
+	/* Decode version. */
+	vers = params->vers.data.u.str.str;
+	vers_len = params->vers.data.u.str.len;
+
+	/* Decode header binary block. */
+	buf = params->hdrs_bin.data.u.str.str;
+	end = buf + params->hdrs_bin.data.u.str.len;
+
+	/* Decode each header. */
+	hdr_nb = 0;
+	while (1) {
+
+		/* Initialise the storage struct. It is useless
+		 * because the process fail if the struct is not
+		 * fully filled. This init is just does in order
+		 * to prevent bug after some improvements.
+		 */
+		memset(&hdr, 0, sizeof(hdr));
+
+		/* Decode header name. */
+		ret = decode_varint(&buf, end, &hdr.name_len);
+		if (ret == -1)
+			return -1;
+		hdr.name = buf;
+		buf += hdr.name_len;
+		if (buf > end)
+			return -1;
+
+		/* Decode header value. */
+		ret = decode_varint(&buf, end, &hdr.value_len);
+		if (ret == -1)
+			return -1;
+		hdr.value = buf;
+		buf += hdr.value_len;
+		if (buf > end)
+			return -1;
+
+		/* Detect the end of the headers. */
+		if (hdr.name_len == 0 && hdr.value_len == 0)
+			break;
+
+		/* Store the header. */
+		if (hdr_nb < 255) {
+			memcpy(&hdrs[hdr_nb], &hdr, sizeof(hdr));
+			hdr_nb++;
+		}
+	}
+
+	/* Decode body length. Note that the following control
+	 * is just set for avoifing a gcc warning.
+	 */
+	body_exposed_len = (uint64_t)params->body_length.data.u.sint;
+	if (body_exposed_len < 0)
+		return -1;
+
+	/* Decode body. */
+	body = params->body.data.u.str.str;
+	body_len = params->body.data.u.str.len;
+
+	fail = 1;
+
+	/* Init processing */
+
+	cr = modsecNewConnection();
+	req = modsecNewRequest(cr, modsec_config);
+
+	/* Load request. */
+
+	req->proxyreq = PROXYREQ_NONE;
+	req->header_only = 0; /* May modified later */
+
+	/* Copy header list. */
+
+	for (i = 0; i < hdr_nb; i++) {
+		name = chunk_strdup(req, hdrs[i].name, hdrs[i].name_len);
+		if (!name) {
+			errno = ENOMEM;
+			goto fail;
+		}
+		value = chunk_strdup(req, hdrs[i].value, hdrs[i].value_len);
+		if (!value) {
+			errno = ENOMEM;
+			goto fail;
+		}
+		apr_table_setn(req->headers_in, name, value);
+	}
+
+	/* Process special headers. */
+	req->range = apr_table_get(req->headers_in, "Range");
+	req->content_type = apr_table_get(req->headers_in, "Content-Type");
+	req->content_encoding = apr_table_get(req->headers_in, "Content-Encoding");
+	req->hostname = apr_table_get(req->headers_in, "Host");
+	req->parsed_uri.hostname = chunk_strdup(req, req->hostname, strlen(req->hostname));
+
+	lang = apr_table_get(req->headers_in, "Content-Languages");
+	if (lang != NULL) {
+		req->content_languages = apr_array_make(req->pool, 1, sizeof(const char *));
+		*(const char **)apr_array_push(req->content_languages) = lang;
+	}
+
+	lang = apr_table_get(req->headers_in, "Content-Length");
+	if (lang) {
+		errno = 0;
+		clength = strtol(lang, &err, 10);
+		if (*err != '\0' || errno != 0 || clength < 0 || clength > INT_MAX) {
+			errno = ERANGE;
+			goto fail;
+		}
+		req->clength = clength;
+	}
+
+	/* Copy the first line of the request. */
+	req->the_request = printf_dup(req, "%.*s %.*s%s%.*s %.*s",
+	                              meth_len, meth,
+	                              path_len, path,
+	                              qs_len > 0 ? "?" : "",
+	                              qs_len, qs,
+	                              vers_len, vers);
+	if (!req->the_request) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Copy the method. */
+	req->method = chunk_strdup(req, meth, meth_len);
+	if (!req->method) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Set the method number. */
+	if (meth_len < 3) {
+		errno = EINVAL;
+		goto fail;
+	}
+
+	/* Detect the method */
+	switch (meth_len) {
+	case 3:
+		if (strncmp(req->method, "GET", 3) == 0)
+			req->method_number = M_GET;
+		else if (strncmp(req->method, "PUT", 3) == 0)
+			req->method_number = M_PUT;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 4:
+		if (strncmp(req->method, "POST", 4) == 0)
+			req->method_number = M_POST;
+		else if (strncmp(req->method, "HEAD", 4) == 0) {
+			req->method_number = M_GET;
+			req->header_only = 1;
+		}
+		else if (strncmp(req->method, "COPY", 4) == 0)
+			req->method_number = M_COPY;
+		else if (strncmp(req->method, "MOVE", 4) == 0)
+			req->method_number = M_MOVE;
+		else if (strncmp(req->method, "LOCK", 4) == 0)
+			req->method_number = M_LOCK;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 5:
+		if (strncmp(req->method, "TRACE", 5) == 0)
+			req->method_number = M_TRACE;
+		else if (strncmp(req->method, "PATCH", 5) == 0)
+			req->method_number = M_PATCH;
+		else if (strncmp(req->method, "MKCOL", 5) == 0)
+			req->method_number = M_MKCOL;
+		else if (strncmp(req->method, "MERGE", 5) == 0)
+			req->method_number = M_MERGE;
+		else if (strncmp(req->method, "LABEL", 5) == 0)
+			req->method_number = M_LABEL;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 6:
+		if (strncmp(req->method, "DELETE", 6) == 0)
+			req->method_number = M_DELETE;
+		else if (strncmp(req->method, "REPORT", 6) == 0)
+			req->method_number = M_REPORT;
+		else if (strncmp(req->method, "UPDATE", 6) == 0)
+			req->method_number = M_UPDATE;
+		else if (strncmp(req->method, "UNLOCK", 6) == 0)
+			req->method_number = M_UNLOCK;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 7:
+		if (strncmp(req->method, "CHECKIN", 7) == 0)
+			req->method_number = M_CHECKIN;
+		else if (strncmp(req->method, "INVALID", 7) == 0)
+			req->method_number = M_INVALID;
+		else if (strncmp(req->method, "CONNECT", 7) == 0)
+			req->method_number = M_CONNECT;
+		else if (strncmp(req->method, "OPTIONS", 7) == 0)
+			req->method_number = M_OPTIONS;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 8:
+		if (strncmp(req->method, "PROPFIND", 8) == 0)
+			req->method_number = M_PROPFIND;
+		else if (strncmp(req->method, "CHECKOUT", 8) == 0)
+			req->method_number = M_CHECKOUT;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 9:
+		if (strncmp(req->method, "PROPPATCH", 9) == 0)
+			req->method_number = M_PROPPATCH;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 10:
+		if (strncmp(req->method, "MKACTIVITY", 10) == 0)
+			req->method_number = M_MKACTIVITY;
+		else if (strncmp(req->method, "UNCHECKOUT", 10) == 0)
+			req->method_number = M_UNCHECKOUT;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 11:
+		if (strncmp(req->method, "MKWORKSPACE", 11) == 0)
+			req->method_number = M_MKWORKSPACE;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 15:
+		if (strncmp(req->method, "VERSION_CONTROL", 15) == 0)
+			req->method_number = M_VERSION_CONTROL;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	case 16:
+		if (strncmp(req->method, "BASELINE_CONTROL", 16) == 0)
+			req->method_number = M_BASELINE_CONTROL;
+		else {
+			errno = EINVAL;
+			goto fail;
+		}
+		break;
+	default:
+		errno = EINVAL;
+		goto fail;
+	}
+
+	/* Copy the protocol. */
+	req->protocol = chunk_strdup(req, vers, vers_len);
+	if (!req->protocol) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Compute the protocol number. */
+	if (vers_len >= 8)
+		req->proto_num = 1000 + !!(vers[7] == '1');
+
+	/* The request time. */
+	gettimeofday(&now, NULL);
+	req->request_time = apr_time_make(now.tv_sec, now.tv_usec / 1000);
+
+	/* No status line. */
+	req->status_line = NULL;
+	req->status = 0;
+
+	/* Copy path. */
+	req->parsed_uri.path = chunk_strdup(req, path, path_len);
+	if (!req->parsed_uri.path) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Copy args (query string). */
+	req->args = chunk_strdup(req, qs, qs_len);
+	if (!req->args) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Set parsed_uri */
+
+	req->parsed_uri.scheme = "http";
+
+	if (req->hostname && req->parsed_uri.scheme && req->parsed_uri.path) {
+		i = snprintf(NULL, 0, "%s://%s%s",
+		             req->parsed_uri.scheme, req->hostname, req->parsed_uri.path);
+		req->uri = apr_pcalloc(req->pool, i + 1);
+		if (!req->uri) {
+			errno = ENOMEM;
+			goto fail;
+		}
+		i = snprintf(req->uri, i + 1, "%s://%s%s",
+		             req->parsed_uri.scheme, req->hostname, req->parsed_uri.path);
+	}
+
+	req->filename = req->parsed_uri.path;
+
+	/* Set unique id */
+
+	apr_table_setn(req->subprocess_env, "UNIQUE_ID", chunk_strdup(req, uniqueid, uniqueid_len));
+
+	/*
+	 *
+	 * Load body.
+	 *
+	 */
+
+	/* Create an empty bucket brigade */
+	brigade = apr_brigade_create(req->pool, req->connection->bucket_alloc);
+	if (!brigade) {
+		errno = ENOMEM;
+		goto fail;
+	}
+
+	/* Stores HTTP body avalaible data in a bucket */
+	data_bucket = apr_bucket_alloc(sizeof(*data_bucket), req->connection->bucket_alloc);
+	if (!data_bucket) {
+		errno = ENOMEM;
+		goto fail;
+	}
+	data_bucket->buffer = (char *)body;
+	data_bucket->length = body_len;
+
+	/* Create linked bucket */
+	link_bucket = apr_bucket_alloc(sizeof(*link_bucket), req->connection->bucket_alloc);
+	if (!link_bucket) {
+		errno = ENOMEM;
+		goto fail;
+	}
+	APR_BUCKET_INIT(link_bucket); /* link */
+	link_bucket->free = apr_bucket_free;
+	link_bucket->list = req->connection->bucket_alloc;
+	link_bucket = apr_bucket_shared_make(link_bucket, data_bucket, 0, body_len);
+	link_bucket->type = &apr_bucket_type_haproxy;
+
+	/* Insert the bucket at the end of the brigade. */
+	APR_BRIGADE_INSERT_TAIL(brigade, link_bucket);
+
+	/* Insert the last bucket. */
+	last_bucket = apr_bucket_eos_create(req->connection->bucket_alloc);
+	APR_BRIGADE_INSERT_TAIL(brigade, last_bucket);
+
+	/* Declares the bucket brigade in modsecurity */
+	modsecSetBodyBrigade(req, brigade);
+
+	/*
+	 *
+	 * Process analysis.
+	 *
+	 */
+
+	/* Process request headers analysis. */
+	status = modsecProcessRequestHeaders(req);
+	if (status != DECLINED && status != DONE)
+		return_code = status;
+
+	/* Process request body analysis. */
+	status = modsecProcessRequestBody(req);
+	if (status != DECLINED && status != DONE)
+		return_code = status;
+
+	/* End processing. */
+
+	fail = 0;
+	if (return_code == -1)
+		return_code = 0;
+
+fail:
+
+	modsecFinishRequest(req);
+	modsecFinishConnection(cr);
+
+	if (fail) {
+
+		/* errno == ERANGE / ENOMEM / EINVAL */
+		switch (errno) {
+		case ERANGE: LOG(worker, "Invalid range");
+		case ENOMEM: LOG(worker, "Out of memory error");
+		case EINVAL: LOG(worker, "Invalid value");
+		default:     LOG(worker, "Unknown error");
+		}
+	}
+
+	return return_code;
+}
diff --git a/contrib/modsecurity/modsec_wrapper.h b/contrib/modsecurity/modsec_wrapper.h
new file mode 100644
index 0000000..e4b0484
--- /dev/null
+++ b/contrib/modsecurity/modsec_wrapper.h
@@ -0,0 +1,34 @@
+/*
+ * Modsecurity wrapper for haproxy
+ *
+ * This file contains the headers of the wrapper which sends data
+ * in ModSecurity and returns the verdict.
+ *
+ * Copyright 2016 OZON, Thierry Fournier <thierry.fournier@ozon.io>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __MODSEC_WRAPPER_H__
+#define __MODSEC_WRAPPER_H__
+
+#include "spoa.h"
+
+struct modsecurity_parameters {
+	struct sample uniqueid;
+	struct sample method;
+	struct sample path;
+	struct sample query;
+	struct sample vers;
+	struct sample hdrs_bin;
+	struct sample body_length;
+	struct sample body;
+};
+
+int modsecurity_load(const char *file);
+int modsecurity_process(struct worker *worker, struct modsecurity_parameters *params);
+
+#endif /* __MODSEC_WRAPPER_H__ */
diff --git a/contrib/modsecurity/spoa.c b/contrib/modsecurity/spoa.c
new file mode 100644
index 0000000..506ff82
--- /dev/null
+++ b/contrib/modsecurity/spoa.c
@@ -0,0 +1,1916 @@
+/*
+ * Modsecurity wrapper for haproxy
+ *
+ * This file contains the bootstrap for laucnching and scheduling modsecurity
+ * for working with HAProxy SPOE protocol.
+ *
+ * Copyright 2016 OZON, Thierry Fournier <thierry.fournier@ozon.io>
+ *
+ * This file is inherited from "A Random IP reputation service acting as a Stream
+ * Processing Offload Agent"
+ *
+ * Copyright 2016 HAProxy Technologies, Christopher Faulet <cfaulet@haproxy.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <stdio.h>
+#include <signal.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <err.h>
+#include <ctype.h>
+
+#include <pthread.h>
+
+#include <event2/util.h>
+#include <event2/event.h>
+#include <event2/event_struct.h>
+#include <event2/thread.h>
+
+#include <common/mini-clist.h>
+#include <common/chunk.h>
+
+#include <proto/spoe.h>
+
+#include "spoa.h"
+#include "modsec_wrapper.h"
+
+#define DEFAULT_PORT       12345
+#define CONNECTION_BACKLOG 10
+#define NUM_WORKERS        10
+#define MAX_FRAME_SIZE     16384
+#define SPOP_VERSION       "1.0"
+
+#define SLEN(str) (sizeof(str)-1)
+
+#define DEBUG(x...)				\
+	do {					\
+		if (debug)			\
+			LOG(x);			\
+	} while (0)
+
+
+enum spoa_state {
+	SPOA_ST_CONNECTING = 0,
+	SPOA_ST_PROCESSING,
+	SPOA_ST_DISCONNECTING,
+};
+
+enum spoa_frame_type {
+	SPOA_FRM_T_UNKNOWN = 0,
+	SPOA_FRM_T_HAPROXY,
+	SPOA_FRM_T_AGENT,
+};
+
+struct spoe_engine {
+	char       *id;
+
+	struct list processing_frames;
+	struct list outgoing_frames;
+
+	struct list clients;
+	struct list list;
+};
+
+struct spoe_frame {
+	enum spoa_frame_type type;
+	char                *buf;
+	unsigned int         offset;
+	unsigned int         len;
+
+	unsigned int         stream_id;
+	unsigned int         frame_id;
+	unsigned int         flags;
+	bool                 hcheck;     /* true is the CONNECT frame is a healthcheck */
+	bool                 fragmented; /* true if the frame is fragmented */
+	int                  modsec_code;  /* modsecurity return code. -1 if unset, 0 if none, other it returns http code. */
+
+	struct event         process_frame_event;
+	struct worker       *worker;
+	struct spoe_engine  *engine;
+	struct client       *client;
+	struct list          list;
+
+	char                *frag_buf; /* used to accumulate payload of a fragmented frame */
+	unsigned int         frag_len;
+
+	char                 data[0];
+};
+
+struct client {
+	int                 fd;
+	unsigned long       id;
+	enum spoa_state     state;
+
+	struct event        read_frame_event;
+	struct event        write_frame_event;
+
+	struct spoe_frame  *incoming_frame;
+	struct spoe_frame  *outgoing_frame;
+
+	struct list         processing_frames;
+	struct list         outgoing_frames;
+
+	unsigned int        max_frame_size;
+	int                 status_code;
+
+	char               *engine_id;
+	struct spoe_engine *engine;
+	bool                pipelining;
+	bool                async;
+	bool                fragmentation;
+
+	struct worker      *worker;
+	struct list         by_worker;
+	struct list         by_engine;
+};
+
+/* Globals */
+static struct worker *workers          = NULL;
+ struct worker  null_worker            = { .id = 0 };
+static unsigned long  clicount         = 0;
+static int            server_port      = DEFAULT_PORT;
+static int            num_workers      = NUM_WORKERS;
+static unsigned int   max_frame_size   = MAX_FRAME_SIZE;
+struct timeval        processing_delay = {0, 0};
+static bool           debug            = false;
+static bool           pipelining       = false;
+static bool           async            = false;
+static bool           fragmentation    = false;
+
+
+static const char *spoe_frm_err_reasons[SPOE_FRM_ERRS] = {
+	[SPOE_FRM_ERR_NONE]               = "normal",
+	[SPOE_FRM_ERR_IO]                 = "I/O error",
+	[SPOE_FRM_ERR_TOUT]               = "a timeout occurred",
+	[SPOE_FRM_ERR_TOO_BIG]            = "frame is too big",
+	[SPOE_FRM_ERR_INVALID]            = "invalid frame received",
+	[SPOE_FRM_ERR_NO_VSN]             = "version value not found",
+	[SPOE_FRM_ERR_NO_FRAME_SIZE]      = "max-frame-size value not found",
+	[SPOE_FRM_ERR_NO_CAP]             = "capabilities value not found",
+	[SPOE_FRM_ERR_BAD_VSN]            = "unsupported version",
+	[SPOE_FRM_ERR_BAD_FRAME_SIZE]     = "max-frame-size too big or too small",
+	[SPOE_FRM_ERR_FRAG_NOT_SUPPORTED] = "fragmentation not supported",
+	[SPOE_FRM_ERR_INTERLACED_FRAMES]  = "invalid interlaced frames",
+	[SPOE_FRM_ERR_FRAMEID_NOTFOUND]   = "frame-id not found",
+	[SPOE_FRM_ERR_RES]                = "resource allocation error",
+	[SPOE_FRM_ERR_UNKNOWN]            = "an unknown error occurred",
+};
+
+static void signal_cb(evutil_socket_t, short, void *);
+static void accept_cb(evutil_socket_t, short, void *);
+static void worker_monitor_cb(evutil_socket_t, short, void *);
+static void process_frame_cb(evutil_socket_t, short, void *);
+static void read_frame_cb(evutil_socket_t, short, void *);
+static void write_frame_cb(evutil_socket_t, short, void *);
+
+static void use_spoe_engine(struct client *);
+static void unuse_spoe_engine(struct client *);
+static void release_frame(struct spoe_frame *);
+static void release_client(struct client *);
+
+/* Check the protocol version. It returns -1 if an error occurred, the number of
+ * read bytes otherwise. */
+static int
+check_proto_version(struct spoe_frame *frame, char **buf, char *end)
+{
+	char      *str, *p = *buf;
+	uint64_t   sz;
+	int        ret;
+
+	/* Get the list of all supported versions by HAProxy */
+	if ((*p++ & SPOE_DATA_T_MASK) != SPOE_DATA_T_STR)
+		return -1;
+	ret = spoe_decode_buffer(&p, end, &str, &sz);
+	if (ret == -1 || !str)
+		return -1;
+
+	DEBUG(frame->worker, "<%lu> Supported versions : %.*s",
+	      frame->client->id, (int)sz, str);
+
+	/* TODO: Find the right verion in supported ones */
+
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+/* Check max frame size value. It returns -1 if an error occurred, the number of
+ * read bytes otherwise. */
+static int
+check_max_frame_size(struct spoe_frame *frame, char **buf, char *end)
+{
+	char    *p = *buf;
+	uint64_t sz;
+	int      type, ret;
+
+	/* Get the max-frame-size value of HAProxy */
+	type =  *p++;
+	if ((type & SPOE_DATA_T_MASK) != SPOE_DATA_T_INT32  &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_INT64  &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_UINT32 &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_UINT64)
+		return -1;
+	if (decode_varint(&p, end, &sz) == -1)
+		return -1;
+
+	/* Keep the lower value */
+	if (sz < frame->client->max_frame_size)
+		frame->client->max_frame_size = sz;
+
+	DEBUG(frame->worker, "<%lu> HAProxy maximum frame size : %u",
+	      frame->client->id, (unsigned int)sz);
+
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+/* Check healthcheck value. It returns -1 if an error occurred, the number of
+ * read bytes otherwise. */
+static int
+check_healthcheck(struct spoe_frame *frame, char **buf, char *end)
+{
+	char *p = *buf;
+	int   type, ret;
+
+	/* Get the "healthcheck" value */
+	type = *p++;
+	if ((type & SPOE_DATA_T_MASK) != SPOE_DATA_T_BOOL)
+		return -1;
+	frame->hcheck = ((type & SPOE_DATA_FL_TRUE) == SPOE_DATA_FL_TRUE);
+
+	DEBUG(frame->worker, "<%lu> HELLO healthcheck : %s",
+	      frame->client->id, (frame->hcheck ? "true" : "false"));
+
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+/* Check capabilities value. It returns -1 if an error occurred, the number of
+ * read bytes otherwise. */
+static int
+check_capabilities(struct spoe_frame *frame, char **buf, char *end)
+{
+	struct client *client = frame->client;
+	char          *str, *p = *buf;
+	uint64_t       sz;
+	int            ret;
+
+	if ((*p++ & SPOE_DATA_T_MASK) != SPOE_DATA_T_STR)
+		return -1;
+	if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+		return -1;
+	if (str == NULL) /* this is not an error */
+		goto end;
+
+	DEBUG(frame->worker, "<%lu> HAProxy capabilities : %.*s",
+	      client->id, (int)sz, str);
+
+	while (sz) {
+		char *delim;
+
+		/* Skip leading spaces */
+		for (; isspace(*str) && sz; sz--);
+
+		if (sz >= 10 && !strncmp(str, "pipelining", 10)) {
+			str += 10; sz -= 10;
+			if (!sz || isspace(*str) || *str == ',') {
+				DEBUG(frame->worker,
+				      "<%lu> HAProxy supports frame pipelining",
+				      client->id);
+				client->pipelining = true;
+			}
+		}
+		else if (sz >= 5 && !strncmp(str, "async", 5)) {
+			str += 5; sz -= 5;
+			if (!sz || isspace(*str) || *str == ',') {
+				DEBUG(frame->worker,
+				      "<%lu> HAProxy supports asynchronous frame",
+				      client->id);
+				client->async = true;
+			}
+		}
+		else if (sz >= 13 && !strncmp(str, "fragmentation", 13)) {
+			str += 13; sz -= 13;
+			if (!sz || isspace(*str) || *str == ',') {
+				DEBUG(frame->worker,
+				      "<%lu> HAProxy supports fragmented frame",
+				      client->id);
+				client->fragmentation = true;
+			}
+		}
+
+		if (!sz || (delim = memchr(str, ',', sz)) == NULL)
+			break;
+		delim++;
+		sz -= (delim - str);
+		str = delim;
+	}
+  end:
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+/* Check engine-id value. It returns -1 if an error occurred, the number of
+ * read bytes otherwise. */
+static int
+check_engine_id(struct spoe_frame *frame, char **buf, char *end)
+{
+	struct client *client = frame->client;
+	char          *str, *p = *buf;
+	uint64_t       sz;
+	int            ret;
+
+	if ((*p++ & SPOE_DATA_T_MASK) != SPOE_DATA_T_STR)
+		return -1;
+
+	if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+		return -1;
+	if (str == NULL) /* this is not an error */
+		goto end;
+
+	if (client->engine != NULL)
+		goto end;
+
+	DEBUG(frame->worker, "<%lu> HAProxy engine id : %.*s",
+	      client->id, (int)sz, str);
+
+	client->engine_id = strndup(str, (int)sz);
+  end:
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+static int
+acc_payload(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *buf;
+	size_t         len = frame->len - frame->offset;
+	int            ret = frame->offset;
+
+	/* No need to accumulation payload */
+	if (frame->fragmented == false)
+		return ret;
+
+	buf = realloc(frame->frag_buf, frame->frag_len + len);
+	if (buf == NULL) {
+		client->status_code = SPOE_FRM_ERR_RES;
+		return -1;
+	}
+	memcpy(buf + frame->frag_len, frame->buf + frame->offset, len);
+	frame->frag_buf  = buf;
+	frame->frag_len += len;
+
+	if (!(frame->flags & SPOE_FRM_FL_FIN)) {
+		/* Wait for next parts */
+		frame->buf    = (char *)(frame->data);
+		frame->offset = 0;
+		frame->len    = 0;
+		frame->flags  = 0;
+		return 1;
+	}
+
+	frame->buf    = frame->frag_buf;
+	frame->len    = frame->frag_len;
+	frame->offset = 0;
+	return ret;
+}
+
+/* Check disconnect status code. It returns -1 if an error occurred, the number
+ * of read bytes otherwise. */
+static int
+check_discon_status_code(struct spoe_frame *frame, char **buf, char *end)
+{
+	char    *p = *buf;
+	uint64_t sz;
+	int      type, ret;
+
+	/* Get the "status-code" value */
+	type =  *p++;
+	if ((type & SPOE_DATA_T_MASK) != SPOE_DATA_T_INT32 &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_INT64 &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_UINT32 &&
+	    (type & SPOE_DATA_T_MASK) != SPOE_DATA_T_UINT64)
+		return -1;
+	if (decode_varint(&p, end, &sz) == -1)
+		return -1;
+
+	frame->client->status_code = (unsigned int)sz;
+
+	DEBUG(frame->worker, "<%lu> Disconnect status code : %u",
+	      frame->client->id, frame->client->status_code);
+
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+/* Check the disconnect message. It returns -1 if an error occurred, the number
+ * of read bytes otherwise. */
+static int
+check_discon_message(struct spoe_frame *frame, char **buf, char *end)
+{
+	char    *str, *p = *buf;
+	uint64_t sz;
+	int      ret;
+
+	/* Get the "message" value */
+	if ((*p++ & SPOE_DATA_T_MASK) != SPOE_DATA_T_STR)
+		return -1;
+	ret = spoe_decode_buffer(&p, end, &str, &sz);
+	if (ret == -1 || !str)
+		return -1;
+
+	DEBUG(frame->worker, "<%lu> Disconnect message : %.*s",
+	      frame->client->id, (int)sz, str);
+
+	ret  = (p - *buf);
+	*buf = p;
+	return ret;
+}
+
+
+
+/* Decode a HELLO frame received from HAProxy. It returns -1 if an error
+ * occurred, otherwise the number of read bytes. HELLO frame cannot be
+ * ignored and having another frame than a HELLO frame is an error. */
+static int
+handle_hahello(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *p, *end;
+
+	p = frame->buf;
+	end = frame->buf + frame->len;
+
+	/* Check frame type: we really want a HELLO frame */
+	if (*p++ != SPOE_FRM_T_HAPROXY_HELLO)
+		goto error;
+
+	DEBUG(frame->worker, "<%lu> Decode HAProxy HELLO frame", client->id);
+
+	/* Retrieve flags */
+	memcpy((char *)&(frame->flags), p, 4);
+	p += 4;
+
+	/* Fragmentation is not supported for HELLO frame */
+	if (!(frame->flags & SPOE_FRM_FL_FIN)) {
+		client->status_code = SPOE_FRM_ERR_FRAG_NOT_SUPPORTED;
+		goto error;
+	}
+
+	/* stream-id and frame-id must be cleared */
+	if (*p != 0 || *(p+1) != 0) {
+		client->status_code = SPOE_FRM_ERR_INVALID;
+		goto error;
+	}
+	p += 2;
+
+	/* Loop on K/V items */
+	while (p < end) {
+		char     *str;
+		uint64_t  sz;
+
+		/* Decode the item name */
+		spoe_decode_buffer(&p, end, &str, &sz);
+		if (!str) {
+			client->status_code = SPOE_FRM_ERR_INVALID;
+			goto error;
+		}
+
+		/* Check "supported-versions" K/V item */
+		if (!memcmp(str, "supported-versions", sz)) {
+			if (check_proto_version(frame, &p, end)  == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		/* Check "max-frame-size" K/V item */
+		else if (!memcmp(str, "max-frame-size", sz)) {
+			if (check_max_frame_size(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		/* Check "healthcheck" K/V item */
+		else if (!memcmp(str, "healthcheck", sz)) {
+			if (check_healthcheck(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		/* Check "capabilities" K/V item */
+		else if (!memcmp(str, "capabilities", sz)) {
+			if (check_capabilities(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		/* Check "engine-id" K/V item */
+		else if (!memcmp(str, "engine-id", sz)) {
+			if (check_engine_id(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		else {
+			DEBUG(frame->worker, "<%lu> Skip K/V item : key=%.*s",
+			      client->id, (int)sz, str);
+
+			/* Silently ignore unknown item */
+			if (spoe_skip_data(&p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+	}
+
+	if (async == false || client->engine_id == NULL)
+		client->async = false;
+	if (pipelining == false)
+		client->pipelining = false;
+
+	if (client->async == true)
+		use_spoe_engine(client);
+
+	return (p - frame->buf);
+  error:
+	return -1;
+}
+
+/* Decode a DISCONNECT frame received from HAProxy. It returns -1 if an error
+ * occurred, otherwise the number of read bytes. DISCONNECT frame cannot be
+ * ignored and having another frame than a DISCONNECT frame is an error.*/
+static int
+handle_hadiscon(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *p, *end;
+
+	p = frame->buf;
+	end = frame->buf + frame->len;
+
+	/* Check frame type: we really want a DISCONNECT frame */
+	if (*p++ != SPOE_FRM_T_HAPROXY_DISCON)
+		goto error;
+
+	DEBUG(frame->worker, "<%lu> Decode HAProxy DISCONNECT frame", client->id);
+
+	/* Retrieve flags */
+	memcpy((char *)&(frame->flags), p, 4);
+	p += 4;
+
+	/* Fragmentation is not supported for DISCONNECT frame */
+	if (!(frame->flags & SPOE_FRM_FL_FIN)) {
+		client->status_code = SPOE_FRM_ERR_FRAG_NOT_SUPPORTED;
+		goto error;
+	}
+
+	/* stream-id and frame-id must be cleared */
+	if (*p != 0 || *(p+1) != 0) {
+		client->status_code = SPOE_FRM_ERR_INVALID;
+		goto error;
+	}
+	p += 2;
+
+	client->status_code = SPOE_FRM_ERR_NONE;
+
+	/* Loop on K/V items */
+	while (p < end) {
+		char     *str;
+		uint64_t  sz;
+
+		/* Decode item key */
+		spoe_decode_buffer(&p, end, &str, &sz);
+		if (!str) {
+			client->status_code = SPOE_FRM_ERR_INVALID;
+			goto error;
+		}
+
+		/* Check "status-code" K/V item */
+		if (!memcmp(str, "status-code", sz)) {
+			if (check_discon_status_code(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		/* Check "message" K/V item */
+		else if (!memcmp(str, "message", sz)) {
+			if (check_discon_message(frame, &p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+		else {
+			DEBUG(frame->worker, "<%lu> Skip K/V item : key=%.*s",
+			      client->id, (int)sz, str);
+
+			/* Silently ignore unknown item */
+			if (spoe_skip_data(&p, end) == -1) {
+				client->status_code = SPOE_FRM_ERR_INVALID;
+				goto error;
+			}
+		}
+	}
+
+	return (p - frame->buf);
+  error:
+	return -1;
+}
+
+/* Decode a NOTIFY frame received from HAProxy. It returns -1 if an error
+ * occurred, 0 if it must be must be ignored, otherwise the number of read
+ * bytes. */
+static int
+handle_hanotify(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *p, *end;
+	uint64_t       stream_id, frame_id;
+
+	p = frame->buf;
+	end = frame->buf + frame->len;
+
+	/* Check frame type */
+	if (*p++ != SPOE_FRM_T_HAPROXY_NOTIFY)
+		goto ignore;
+
+	DEBUG(frame->worker, "<%lu> Decode HAProxy NOTIFY frame", client->id);
+
+	/* Retrieve flags */
+	memcpy((char *)&(frame->flags), p, 4);
+	p += 4;
+
+	/* Fragmentation is not supported */
+	if (!(frame->flags & SPOE_FRM_FL_FIN) && fragmentation == false) {
+		client->status_code = SPOE_FRM_ERR_FRAG_NOT_SUPPORTED;
+		goto error;
+	}
+
+	/* Read the stream-id and frame-id */
+	if (decode_varint(&p, end, &stream_id) == -1)
+		goto ignore;
+	if (decode_varint(&p, end, &frame_id) == -1)
+		goto ignore;
+
+	frame->stream_id = (unsigned int)stream_id;
+	frame->frame_id  = (unsigned int)frame_id;
+
+	DEBUG(frame->worker, "<%lu> STREAM-ID=%u - FRAME-ID=%u"
+	      " - %s frame received"
+	      " - frag_len=%u - len=%u - offset=%ld",
+	      client->id, frame->stream_id, frame->frame_id,
+	      (frame->flags & SPOE_FRM_FL_FIN) ? "unfragmented" : "fragmented",
+	      frame->frag_len, frame->len, p - frame->buf);
+
+	frame->fragmented = !(frame->flags & SPOE_FRM_FL_FIN);
+	frame->offset = (p - frame->buf);
+	return acc_payload(frame);
+
+  ignore:
+	return 0;
+
+  error:
+	return -1;
+}
+
+/* Decode next part of a fragmented frame received from HAProxy. It returns -1
+ * if an error occurred, 0 if it must be must be ignored, otherwise the number
+ * of read bytes. */
+static int
+handle_hafrag(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *p, *end;
+	uint64_t       stream_id, frame_id;
+
+	p = frame->buf;
+	end = frame->buf + frame->len;
+
+	/* Check frame type */
+	if (*p++ != SPOE_FRM_T_UNSET)
+		goto ignore;
+
+	DEBUG(frame->worker, "<%lu> Decode Next part of a fragmented frame", client->id);
+
+	/* Fragmentation is not supported */
+	if (fragmentation == false) {
+		client->status_code = SPOE_FRM_ERR_FRAG_NOT_SUPPORTED;
+		goto error;
+	}
+
+	/* Retrieve flags */
+	memcpy((char *)&(frame->flags), p, 4);
+	p+= 4;
+
+	/* Read the stream-id and frame-id */
+	if (decode_varint(&p, end, &stream_id) == -1)
+		goto ignore;
+	if (decode_varint(&p, end, &frame_id) == -1)
+		goto ignore;
+
+	if (frame->fragmented == false                  ||
+	    frame->stream_id != (unsigned int)stream_id ||
+	    frame->frame_id  != (unsigned int)frame_id) {
+		client->status_code = SPOE_FRM_ERR_INTERLACED_FRAMES;
+		goto error;
+	}
+
+	if (frame->flags & SPOE_FRM_FL_ABRT) {
+		DEBUG(frame->worker, "<%lu> STREAM-ID=%u - FRAME-ID=%u"
+		      " - Abort processing of a fragmented frame"
+		      " - frag_len=%u - len=%u - offset=%ld",
+		      client->id, frame->stream_id, frame->frame_id,
+		      frame->frag_len, frame->len, p - frame->buf);
+		goto ignore;
+	}
+
+	DEBUG(frame->worker, "<%lu> STREAM-ID=%u - FRAME-ID=%u"
+	      " - %s fragment of a fragmented frame received"
+	      " - frag_len=%u - len=%u - offset=%ld",
+	      client->id, frame->stream_id, frame->frame_id,
+	      (frame->flags & SPOE_FRM_FL_FIN) ? "last" : "next",
+	      frame->frag_len, frame->len, p - frame->buf);
+
+	frame->offset = (p - frame->buf);
+	return acc_payload(frame);
+
+  ignore:
+	return 0;
+
+  error:
+	return -1;
+}
+
+/* Encode a HELLO frame to send it to HAProxy. It returns the number of written
+ * bytes. */
+static int
+prepare_agenthello(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char          *p, *end;
+	char           capabilities[64];
+	int            n;
+	unsigned int   flags  = SPOE_FRM_FL_FIN;
+
+	DEBUG(frame->worker, "<%lu> Encode Agent HELLO frame", client->id);
+	frame->type = SPOA_FRM_T_AGENT;
+
+	p   = frame->buf;
+	end = frame->buf+max_frame_size;
+
+	/* Frame Type */
+	*p++ = SPOE_FRM_T_AGENT_HELLO;
+
+	/* Set flags */
+	memcpy(p, (char *)&flags, 4);
+	p += 4;
+
+	/* No stream-id and frame-id for HELLO frames */
+	*p++ = 0;
+	*p++ = 0;
+
+	/* "version" K/V item */
+	spoe_encode_buffer("version", 7, &p, end);
+	*p++ = SPOE_DATA_T_STR;
+	spoe_encode_buffer(SPOP_VERSION, SLEN(SPOP_VERSION), &p, end);
+	DEBUG(frame->worker, "<%lu> Agent version : %s",
+	      client->id, SPOP_VERSION);
+
+
+	/* "max-frame-size" K/V item */
+	spoe_encode_buffer("max-frame-size", 14, &p ,end);
+	*p++ = SPOE_DATA_T_UINT32;
+	encode_varint(client->max_frame_size, &p, end);
+	DEBUG(frame->worker, "<%lu> Agent maximum frame size : %u",
+	      client->id, client->max_frame_size);
+
+	/* "capabilities" K/V item */
+	spoe_encode_buffer("capabilities", 12, &p, end);
+	*p++ = SPOE_DATA_T_STR;
+
+	memset(capabilities, 0, sizeof(capabilities));
+	n = 0;
+
+	/*     1. Fragmentation capability ? */
+	if (fragmentation == true) {
+		memcpy(capabilities, "fragmentation", 13);
+		n += 13;
+	}
+	/*     2. Pipelining capability ? */
+	if (client->pipelining == true) {
+		if (n) capabilities[n++] = ',';
+		memcpy(capabilities + n, "pipelining", 10);
+		n += 10;
+	}
+	/*     3. Async capability ? */
+	if (client->async == true) {
+		if (n) capabilities[n++] = ',';
+		memcpy(capabilities + n, "async", 5);
+		n += 5;
+	}
+	spoe_encode_buffer(capabilities, n, &p, end);
+
+	DEBUG(frame->worker, "<%lu> Agent capabilities : %.*s",
+	      client->id, n, capabilities);
+
+	frame->len = (p - frame->buf);
+	return frame->len;
+}
+
+/* Encode a DISCONNECT frame to send it to HAProxy. It returns the number of
+ * written bytes. */
+static int
+prepare_agentdicon(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+	char           *p, *end;
+	const char     *reason;
+	int             rlen;
+	unsigned int    flags  = SPOE_FRM_FL_FIN;
+
+	DEBUG(frame->worker, "<%lu> Encode Agent DISCONNECT frame", client->id);
+	frame->type = SPOA_FRM_T_AGENT;
+
+	p   = frame->buf;
+	end = frame->buf+max_frame_size;
+
+	if (client->status_code >= SPOE_FRM_ERRS)
+		client->status_code = SPOE_FRM_ERR_UNKNOWN;
+	reason = spoe_frm_err_reasons[client->status_code];
+	rlen   = strlen(reason);
+
+	/* Frame type */
+	*p++ = SPOE_FRM_T_AGENT_DISCON;
+
+	/* Set flags */
+	memcpy(p, (char *)&flags, 4);
+	p += 4;
+
+	/* No stream-id and frame-id for DISCONNECT frames */
+	*p++ = 0;
+	*p++ = 0;
+
+	/* There are 2 mandatory items: "status-code" and "message" */
+
+	/* "status-code" K/V item */
+	spoe_encode_buffer("status-code", 11, &p, end);
+	*p++ = SPOE_DATA_T_UINT32;
+	encode_varint(client->status_code, &p, end);
+	DEBUG(frame->worker, "<%lu> Disconnect status code : %u",
+	      client->id, client->status_code);
+
+	/* "message" K/V item */
+	spoe_encode_buffer("message", 7, &p, end);
+	*p++ = SPOE_DATA_T_STR;
+	spoe_encode_buffer(reason, rlen, &p, end);
+	DEBUG(frame->worker, "<%lu> Disconnect message : %s",
+	      client->id, reason);
+
+	frame->len = (p - frame->buf);
+	return frame->len;
+}
+
+/* Encode a ACK frame to send it to HAProxy. It returns the number of written
+ * bytes. */
+static int
+prepare_agentack(struct spoe_frame *frame)
+{
+	char        *p, *end;
+	unsigned int flags  = SPOE_FRM_FL_FIN;
+
+	/* Be careful here, in async mode, frame->client can be NULL */
+
+	DEBUG(frame->worker, "Encode Agent ACK frame");
+	frame->type = SPOA_FRM_T_AGENT;
+
+	p   = frame->buf;
+	end = frame->buf+max_frame_size;
+
+	/* Frame type */
+	*p++ = SPOE_FRM_T_AGENT_ACK;
+
+	/* Set flags */
+	memcpy(p, (char *)&flags, 4);
+	p += 4;
+
+	/* Set stream-id and frame-id for ACK frames */
+	encode_varint(frame->stream_id, &p, end);
+	encode_varint(frame->frame_id, &p, end);
+
+	DEBUG(frame->worker, "STREAM-ID=%u - FRAME-ID=%u",
+	      frame->stream_id, frame->frame_id);
+
+	frame->len = (p - frame->buf);
+	return frame->len;
+}
+
+static int
+create_server_socket(void)
+{
+	struct sockaddr_in listen_addr;
+	int                fd, yes = 1;
+
+	fd = socket(AF_INET, SOCK_STREAM, 0);
+	if (fd < 0) {
+		LOG(&null_worker, "Failed to create service socket : %m");
+		return -1;
+	}
+
+	memset(&listen_addr, 0, sizeof(listen_addr));
+	listen_addr.sin_family = AF_INET;
+	listen_addr.sin_addr.s_addr = INADDR_ANY;
+	listen_addr.sin_port = htons(server_port);
+
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0 ||
+	    setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &yes, sizeof(yes)) < 0) {
+		LOG(&null_worker, "Failed to set option on server socket : %m");
+		return -1;
+	}
+
+	if (bind(fd, (struct sockaddr *) &listen_addr, sizeof(listen_addr)) < 0) {
+		LOG(&null_worker, "Failed to bind server socket : %m");
+		return -1;
+	}
+
+	if (listen(fd, CONNECTION_BACKLOG) < 0) {
+		LOG(&null_worker, "Failed to listen on server socket : %m");
+		return -1;
+	}
+
+	return fd;
+}
+
+static void
+release_frame(struct spoe_frame *frame)
+{
+	struct worker *worker;
+
+	if (frame == NULL)
+		return;
+
+	if (event_pending(&frame->process_frame_event, EV_TIMEOUT, NULL))
+		event_del(&frame->process_frame_event);
+
+	worker = frame->worker;
+	LIST_DEL(&frame->list);
+	if (frame->frag_buf)
+		free(frame->frag_buf);
+	memset(frame, 0, sizeof(*frame)+max_frame_size+4);
+	LIST_ADDQ(&worker->frames, &frame->list);
+}
+
+static void
+release_client(struct client *c)
+{
+	struct spoe_frame *frame, *back;
+
+	if (c == NULL)
+		return;
+
+	DEBUG(c->worker, "<%lu> Release client", c->id);
+
+	LIST_DEL(&c->by_worker);
+	c->worker->nbclients--;
+
+	unuse_spoe_engine(c);
+	free(c->engine_id);
+
+	if (event_pending(&c->read_frame_event, EV_READ, NULL))
+		event_del(&c->read_frame_event);
+	if (event_pending(&c->write_frame_event, EV_WRITE, NULL))
+		event_del(&c->write_frame_event);
+
+	release_frame(c->incoming_frame);
+	release_frame(c->outgoing_frame);
+	list_for_each_entry_safe(frame, back, &c->processing_frames, list) {
+		release_frame(frame);
+	}
+	list_for_each_entry_safe(frame, back, &c->outgoing_frames, list) {
+		release_frame(frame);
+	}
+
+	if (c->fd >= 0)
+		close(c->fd);
+
+	free(c);
+}
+
+static void
+reset_frame(struct spoe_frame *frame)
+{
+	if (frame == NULL)
+		return;
+
+	if (frame->frag_buf)
+		free(frame->frag_buf);
+
+	frame->type        = SPOA_FRM_T_UNKNOWN;
+	frame->buf         = (char *)(frame->data);
+	frame->offset      = 0;
+	frame->len         = 0;
+	frame->stream_id   = 0;
+	frame->frame_id    = 0;
+	frame->flags       = 0;
+	frame->hcheck      = false;
+	frame->fragmented  = false;
+	frame->modsec_code = -1;
+	frame->frag_buf    = NULL;
+	frame->frag_len    = 0;
+	LIST_INIT(&frame->list);
+}
+
+static void
+use_spoe_engine(struct client *client)
+{
+	struct spoe_engine *eng;
+
+	if (client->engine_id == NULL)
+		return;
+
+	list_for_each_entry(eng, &client->worker->engines, list) {
+		if (!strcmp(eng->id, client->engine_id))
+			goto end;
+	}
+
+	if ((eng = malloc(sizeof(*eng))) == NULL) {
+		client->async = false;
+		return;
+	}
+
+	eng->id = strdup(client->engine_id);
+	LIST_INIT(&eng->clients);
+	LIST_INIT(&eng->processing_frames);
+	LIST_INIT(&eng->outgoing_frames);
+	LIST_ADDQ(&client->worker->engines, &eng->list);
+	LOG(client->worker, "Add new SPOE engine '%s'", eng->id);
+
+  end:
+	client->engine = eng;
+	LIST_ADDQ(&eng->clients, &client->by_engine);
+}
+
+static void
+unuse_spoe_engine(struct client *client)
+{
+	struct spoe_engine *eng;
+	struct spoe_frame  *frame, *back;
+
+	if (client == NULL || client->engine == NULL)
+		return;
+
+	eng = client->engine;
+	client->engine = NULL;
+	LIST_DEL(&client->by_engine);
+	if (!LIST_ISEMPTY(&eng->clients))
+		return;
+
+	LOG(client->worker, "Remove SPOE engine '%s'", eng->id);
+	LIST_DEL(&eng->list);
+
+	list_for_each_entry_safe(frame, back, &eng->processing_frames, list) {
+		release_frame(frame);
+	}
+	list_for_each_entry_safe(frame, back, &eng->outgoing_frames, list) {
+		release_frame(frame);
+	}
+	free(eng->id);
+	free(eng);
+}
+
+
+static struct spoe_frame *
+acquire_incoming_frame(struct client *client)
+{
+	struct spoe_frame *frame;
+
+	frame = client->incoming_frame;
+	if (frame != NULL)
+		return frame;
+
+	if (LIST_ISEMPTY(&client->worker->frames)) {
+		if ((frame = calloc(1, sizeof(*frame)+max_frame_size+4)) == NULL) {
+			LOG(client->worker, "Failed to allocate new frame : %m");
+			return NULL;
+		}
+	}
+	else {
+		frame = LIST_NEXT(&client->worker->frames, typeof(frame), list);
+		LIST_DEL(&frame->list);
+	}
+
+	reset_frame(frame);
+	frame->worker = client->worker;
+	frame->engine = client->engine;
+	frame->client = client;
+
+	if (event_assign(&frame->process_frame_event, client->worker->base, -1,
+			 EV_TIMEOUT|EV_PERSIST, process_frame_cb, frame) < 0) {
+		LOG(client->worker, "Failed to create frame event");
+		return NULL;
+	}
+
+	client->incoming_frame = frame;
+	return frame;
+}
+
+static struct spoe_frame *
+acquire_outgoing_frame(struct client *client)
+{
+	struct spoe_engine *engine = client->engine;
+	struct spoe_frame  *frame = NULL;
+
+	if (client->outgoing_frame != NULL)
+		frame = client->outgoing_frame;
+	else if (!LIST_ISEMPTY(&client->outgoing_frames)) {
+		frame = LIST_NEXT(&client->outgoing_frames, typeof(frame), list);
+		LIST_DEL(&frame->list);
+		client->outgoing_frame = frame;
+	}
+	else if (engine!= NULL && !LIST_ISEMPTY(&engine->outgoing_frames)) {
+		frame = LIST_NEXT(&engine->outgoing_frames, typeof(frame), list);
+		LIST_DEL(&frame->list);
+		client->outgoing_frame = frame;
+	}
+	return frame;
+}
+
+static void
+write_frame(struct client *client, struct spoe_frame *frame)
+{
+	uint32_t netint;
+
+	LIST_DEL(&frame->list);
+
+	frame->buf    = (char *)(frame->data);
+	frame->offset = 0;
+	netint        = htonl(frame->len);
+	memcpy(frame->buf, &netint, 4);
+
+	if (client != NULL) { /* HELLO or DISCONNECT frames */
+		event_add(&client->write_frame_event, NULL);
+
+		/* Try to process the frame as soon as possible, and always
+		 * attach it to the client */
+		if (client->async || client->pipelining) {
+			if (client->outgoing_frame == NULL)
+				client->outgoing_frame = frame;
+			else
+				LIST_ADD(&client->outgoing_frames, &frame->list);
+		}
+		else {
+			client->outgoing_frame = frame;
+			event_del(&client->read_frame_event);
+		}
+	}
+	else { /* for all other frames */
+		if (frame->client == NULL) { /* async mode ! */
+			LIST_ADDQ(&frame->engine->outgoing_frames, &frame->list);
+			list_for_each_entry(client, &frame->engine->clients, by_engine)
+				event_add(&client->write_frame_event, NULL);
+		}
+		else if (frame->client->pipelining) {
+			LIST_ADDQ(&frame->client->outgoing_frames, &frame->list);
+			event_add(&frame->client->write_frame_event, NULL);
+		}
+		else {
+			frame->client->outgoing_frame = frame;
+			event_add(&frame->client->write_frame_event, NULL);
+			event_del(&frame->client->read_frame_event);
+		}
+	}
+}
+
+static void
+process_incoming_frame(struct spoe_frame *frame)
+{
+	struct client *client = frame->client;
+
+	if (event_add(&frame->process_frame_event, &processing_delay) < 0) {
+		LOG(client->worker, "Failed to process incoming frame");
+		release_frame(frame);
+		return;
+	}
+
+	if (client->async) {
+		frame->client = NULL;
+		LIST_ADDQ(&frame->engine->processing_frames, &frame->list);
+	}
+	else if (client->pipelining)
+		LIST_ADDQ(&client->processing_frames, &frame->list);
+	else
+		event_del(&client->read_frame_event);
+}
+
+static void
+signal_cb(evutil_socket_t sig, short events, void *user_data)
+{
+	struct event_base *base = user_data;
+	int                i;
+
+	DEBUG(&null_worker, "Stopping the server");
+
+	event_base_loopbreak(base);
+	DEBUG(&null_worker, "Main event loop stopped");
+
+	for (i = 0; i < num_workers; i++) {
+		event_base_loopbreak(workers[i].base);
+		DEBUG(&null_worker, "Event loop stopped for worker %02d",
+		      workers[i].id);
+	}
+}
+
+static void
+worker_monitor_cb(evutil_socket_t fd, short events, void *arg)
+{
+	struct worker *worker = arg;
+
+	LOG(worker, "%u clients connected", worker->nbclients);
+}
+
+static void
+process_frame_cb(evutil_socket_t fd, short events, void *arg)
+{
+	struct spoe_frame *frame  = arg;
+	char              *p, *end;
+	int                ret;
+
+	DEBUG(frame->worker,
+	      "Process frame messages : STREAM-ID=%u - FRAME-ID=%u - length=%u bytes",
+	      frame->stream_id, frame->frame_id, frame->len - frame->offset);
+
+	p   = frame->buf + frame->offset;
+	end = frame->buf + frame->len;
+
+	/* Loop on messages */
+	while (p < end) {
+		char    *str;
+		uint64_t sz;
+		int      nbargs;
+
+		/* Decode the message name */
+		spoe_decode_buffer(&p, end, &str, &sz);
+		if (!str)
+			goto stop_processing;
+
+		DEBUG(frame->worker, "Process SPOE Message '%.*s'", (int)sz, str);
+
+		nbargs = *p++;                     /* Get the number of arguments */
+		frame->offset = (p - frame->buf);  /* Save index to handle errors and skip args */
+		if (!memcmp(str, "check-request", sz)) {
+			struct modsecurity_parameters params;
+
+			memset(&params, 0, sizeof(params));
+
+			if (nbargs != 8)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode unique id. */
+			if (spoe_decode_data(&p, end, &params.uniqueid) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode method. */
+			if (spoe_decode_data(&p, end, &params.method) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode path. */
+			if (spoe_decode_data(&p, end, &params.path) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode query. */
+			if (spoe_decode_data(&p, end, &params.query) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode protocol version. */
+			if (spoe_decode_data(&p, end, &params.vers) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode hdrs. */
+			if (spoe_decode_data(&p, end, &params.hdrs_bin) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode body length. */
+			if (spoe_decode_data(&p, end, &params.body_length) == -1)
+				goto skip_message;
+
+			/* Decode parameter name. */
+			if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+				goto stop_processing;
+
+			/* Decode body. */
+			if (spoe_decode_data(&p, end, &params.body) == -1)
+				goto skip_message;
+
+			frame->modsec_code = modsecurity_process(frame->worker, &params);
+		}
+		else {
+		  skip_message:
+			p = frame->buf + frame->offset; /* Restore index */
+
+			while (nbargs-- > 0) {
+				/* Silently ignore argument: its name and its value */
+				if (spoe_decode_buffer(&p, end, &str, &sz) == -1)
+					goto stop_processing;
+				if (spoe_skip_data(&p, end) == -1)
+					goto stop_processing;
+			}
+		}
+	}
+
+  stop_processing:
+	/* Prepare agent ACK frame */
+	frame->buf    = (char *)(frame->data) + 4;
+	frame->offset = 0;
+	frame->len    = 0;
+	frame->flags  = 0;
+
+	ret = prepare_agentack(frame);
+	p = frame->buf + ret;
+
+	if (frame->modsec_code != -1) {
+		DEBUG(frame->worker, "Add action : set variable code=%u",
+		      frame->modsec_code);
+
+		*p++ = SPOE_ACT_T_SET_VAR;                     /* Action type */
+		*p++ = 3;                                      /* Number of args */
+		*p++ = SPOE_SCOPE_TXN;                         /* Arg 1: the scope */
+		spoe_encode_buffer("code", 8, &p, end);        /* Arg 2: variable name */
+		*p++ = SPOE_DATA_T_UINT32;
+		encode_varint(frame->modsec_code, &p, end); /* Arg 3: variable value */
+		frame->len = (p - frame->buf);
+	}
+	write_frame(NULL, frame);
+}
+
+static void
+read_frame_cb(evutil_socket_t fd, short events, void *arg)
+{
+	struct client     *client = arg;
+	struct spoe_frame *frame;
+	uint32_t           netint;
+	int                n;
+
+	DEBUG(client->worker, "<%lu> %s", client->id, __FUNCTION__);
+	if ((frame = acquire_incoming_frame(client)) == NULL)
+		goto close;
+
+	frame->type = SPOA_FRM_T_HAPROXY;
+	if (frame->buf == (char *)(frame->data)) {
+		/* Read the frame length: frame->buf points on length part (frame->data) */
+		n = read(client->fd, frame->buf+frame->offset, 4-frame->offset);
+		if (n <= 0) {
+			if (n < 0)
+				LOG(client->worker, "Failed to read frame length : %m");
+			goto close;
+		}
+		frame->offset += n;
+		if (frame->offset != 4)
+			return;
+		memcpy(&netint, frame->buf, 4);
+		frame->buf   += 4;
+		frame->offset = 0;
+		frame->len    = ntohl(netint);
+	}
+
+	/* Read the frame: frame->buf points on frame part (frame->data+4)*/
+	n = read(client->fd, frame->buf + frame->offset,
+		 frame->len - frame->offset);
+	if (n <= 0) {
+		if (n < 0) {
+			LOG(client->worker, "Frame to read frame : %m");
+			goto close;
+		}
+		return;
+	}
+	frame->offset += n;
+	if (frame->offset != frame->len)
+		return;
+	frame->offset = 0;
+
+	DEBUG(client->worker, "<%lu> New Frame of %u bytes received",
+	      client->id, frame->len);
+
+	switch (client->state) {
+		case SPOA_ST_CONNECTING:
+			if (handle_hahello(frame) < 0) {
+				LOG(client->worker, "Failed to decode HELLO frame");
+				goto disconnect;
+			}
+			prepare_agenthello(frame);
+			goto write_frame;
+
+		case SPOA_ST_PROCESSING:
+			if (frame->buf[0] == SPOE_FRM_T_HAPROXY_DISCON) {
+				client->state = SPOA_ST_DISCONNECTING;
+				goto disconnecting;
+			}
+			if (frame->buf[0] == SPOE_FRM_T_UNSET)
+				n = handle_hafrag(frame);
+			else
+				n = handle_hanotify(frame);
+
+			if (n < 0) {
+				LOG(client->worker, "Failed to decode frame: %s",
+				    spoe_frm_err_reasons[client->status_code]);
+				goto disconnect;
+			}
+			else if (n == 0) {
+				LOG(client->worker, "Ignore invalid/unknown/aborted frame");
+				goto ignore_frame;
+			}
+			else if (n == 1)
+				goto noop;
+			else
+				goto process_frame;
+
+		case SPOA_ST_DISCONNECTING:
+		  disconnecting:
+			if (handle_hadiscon(frame) < 0) {
+				LOG(client->worker, "Failed to decode DISCONNECT frame");
+				goto disconnect;
+			}
+			if (client->status_code != SPOE_FRM_ERR_NONE)
+				LOG(client->worker, "<%lu> Peer closed connection: %s",
+				    client->id, spoe_frm_err_reasons[client->status_code]);
+			client->status_code = SPOE_FRM_ERR_NONE;
+			goto disconnect;
+	}
+
+  noop:
+	return;
+
+  ignore_frame:
+	reset_frame(frame);
+	return;
+
+  process_frame:
+	process_incoming_frame(frame);
+	client->incoming_frame = NULL;
+	return;
+
+  write_frame:
+	write_frame(client, frame);
+	client->incoming_frame = NULL;
+	return;
+
+  disconnect:
+	client->state = SPOA_ST_DISCONNECTING;
+	if (prepare_agentdicon(frame) < 0) {
+		LOG(client->worker, "Failed to encode DISCONNECT frame");
+		goto close;
+	}
+	goto write_frame;
+
+  close:
+	release_client(client);
+}
+
+static void
+write_frame_cb(evutil_socket_t fd, short events, void *arg)
+{
+	struct client     *client = arg;
+	struct spoe_frame *frame;
+	int                n;
+
+	DEBUG(client->worker, "<%lu> %s", client->id, __FUNCTION__);
+	if ((frame = acquire_outgoing_frame(client)) == NULL) {
+		event_del(&client->write_frame_event);
+		return;
+	}
+
+	if (frame->buf == (char *)(frame->data)) {
+		/* Write the frame length: frame->buf points on length part (frame->data) */
+		n = write(client->fd, frame->buf+frame->offset, 4-frame->offset);
+		if (n <= 0) {
+			if (n < 0)
+				LOG(client->worker, "Failed to write frame length : %m");
+			goto close;
+		}
+		frame->offset += n;
+		if (frame->offset != 4)
+			return;
+		frame->buf   += 4;
+		frame->offset = 0;
+	}
+
+	/* Write the frame: frame->buf points on frame part (frame->data+4)*/
+	n = write(client->fd, frame->buf + frame->offset,
+		  frame->len - frame->offset);
+	if (n <= 0) {
+		if (n < 0) {
+			LOG(client->worker, "Failed to write frame : %m");
+			goto close;
+		}
+		return;
+	}
+	frame->offset += n;
+	if (frame->offset != frame->len)
+		return;
+
+	DEBUG(client->worker, "<%lu> Frame of %u bytes send",
+	      client->id, frame->len);
+
+	switch (client->state) {
+		case SPOA_ST_CONNECTING:
+			if (frame->hcheck == true) {
+				DEBUG(client->worker,
+				      "<%lu> Close client after healthcheck",
+				      client->id);
+				goto close;
+			}
+			client->state = SPOA_ST_PROCESSING;
+			break;
+
+		case SPOA_ST_PROCESSING:
+			break;
+
+		case SPOA_ST_DISCONNECTING:
+			goto close;
+	}
+
+	release_frame(frame);
+	client->outgoing_frame = NULL;
+	if (!client->async && !client->pipelining) {
+		event_del(&client->write_frame_event);
+		event_add(&client->read_frame_event, NULL);
+	}
+	return;
+
+  close:
+	release_client(client);
+}
+
+static void
+accept_cb(int listener, short event, void *arg)
+{
+	struct worker     *worker;
+	struct client     *client;
+	int                fd;
+
+	worker = &workers[clicount++ % num_workers];
+
+	if ((fd = accept(listener, NULL, NULL)) < 0) {
+		if (errno != EAGAIN && errno != EWOULDBLOCK)
+			LOG(worker, "Failed to accept client connection : %m");
+		return;
+	}
+
+	DEBUG(&null_worker,
+	      "<%lu> New Client connection accepted and assigned to worker %02d",
+	      clicount, worker->id);
+
+	if (evutil_make_socket_nonblocking(fd) < 0) {
+		LOG(&null_worker, "Failed to set client socket to non-blocking : %m");
+		close(fd);
+		return;
+	}
+
+	if ((client = calloc(1, sizeof(*client))) == NULL) {
+		LOG(&null_worker, "Failed to allocate memory for client state : %m");
+		close(fd);
+		return;
+	}
+
+	client->id             = clicount;
+	client->fd             = fd;
+	client->worker         = worker;
+	client->state          = SPOA_ST_CONNECTING;
+	client->status_code    = SPOE_FRM_ERR_NONE;
+	client->max_frame_size = max_frame_size;
+	client->engine         = NULL;
+	client->pipelining     = false;
+	client->async          = false;
+	client->incoming_frame = NULL;
+	client->outgoing_frame = NULL;
+	LIST_INIT(&client->processing_frames);
+	LIST_INIT(&client->outgoing_frames);
+
+	LIST_ADDQ(&worker->clients, &client->by_worker);
+
+	worker->nbclients++;
+
+	if (event_assign(&client->read_frame_event, worker->base, fd,
+			 EV_READ|EV_PERSIST, read_frame_cb, client) < 0     ||
+	    event_assign(&client->write_frame_event, worker->base, fd,
+			 EV_WRITE|EV_PERSIST, write_frame_cb, client) < 0) {
+		LOG(&null_worker, "Failed to create client events");
+		release_client(client);
+		return;
+	}
+	event_add(&client->read_frame_event,  NULL);
+}
+
+static void *
+worker_function(void *data)
+{
+	struct client     *client, *cback;
+	struct spoe_frame *frame, *fback;
+	struct worker     *worker = data;
+
+	DEBUG(worker, "Worker ready to process client messages");
+	event_base_dispatch(worker->base);
+
+	list_for_each_entry_safe(client, cback, &worker->clients, by_worker) {
+		release_client(client);
+	}
+
+	list_for_each_entry_safe(frame, fback, &worker->frames, list) {
+		LIST_DEL(&frame->list);
+		free(frame);
+	}
+
+	event_free(worker->monitor_event);
+	event_base_free(worker->base);
+	DEBUG(worker, "Worker is stopped");
+	pthread_exit(&null_worker);
+}
+
+
+static int
+parse_processing_delay(const char *str)
+{
+        unsigned long value;
+
+        value = 0;
+        while (1) {
+                unsigned int j;
+
+                j = *str - '0';
+                if (j > 9)
+                        break;
+                str++;
+                value *= 10;
+                value += j;
+        }
+
+        switch (*str) {
+		case '\0': /* no unit = millisecond */
+			value *= 1000;
+			break;
+		case 's': /* second */
+			value *= 1000000;
+			str++;
+			break;
+		case 'm': /* millisecond : "ms" */
+			if (str[1] != 's')
+				return -1;
+			value *= 1000;
+			str += 2;
+			break;
+		case 'u': /* microsecond : "us" */
+			if (str[1] != 's')
+				return -1;
+			str += 2;
+			break;
+		default:
+			return -1;
+        }
+	if (*str)
+		return -1;
+
+	processing_delay.tv_sec = (time_t)(value / 1000000);
+	processing_delay.tv_usec = (suseconds_t)(value % 1000000);
+        return 0;
+}
+
+
+static void
+usage(char *prog)
+{
+	fprintf(stderr,
+		"Usage : %s [OPTION]...\n"
+		"    -h                   Print this message\n"
+		"    -d                   Enable the debug mode\n"
+		"    -f <config-file>     ModSecurity configuration file\n"
+		"    -m <max-frame-size>  Specify the maximum frame size (default : %u)\n"
+		"    -p <port>            Specify the port to listen on (default : %d)\n"
+		"    -n <num-workers>     Specify the number of workers (default : %d)\n"
+		"    -c <capability>      Enable the support of the specified capability\n"
+		"    -t <time>            Set a delay to process a message (default: 0)\n"
+		"                           The value is specified in milliseconds by default,\n"
+		"                           but can be in any other unit if the number is suffixed\n"
+		"                           by a unit (us, ms, s)\n"
+		"\n"
+		"    Supported capabilities: fragmentation, pipelining, async\n",
+		prog, MAX_FRAME_SIZE, DEFAULT_PORT, NUM_WORKERS);
+}
+
+int
+main(int argc, char **argv)
+{
+	struct event_base *base = NULL;
+	struct event      *signal_event = NULL, *accept_event = NULL;
+	int                opt, i, fd = -1;
+	const char        *configuration_file = NULL;
+
+	// TODO: add '-t <processing-time>' option
+	while ((opt = getopt(argc, argv, "hdm:n:p:c:t:f:")) != -1) {
+		switch (opt) {
+			case 'h':
+				usage(argv[0]);
+				return EXIT_SUCCESS;
+			case 'd':
+				debug = true;
+				break;
+			case 'm':
+				max_frame_size = atoi(optarg);
+				break;
+			case 'n':
+				num_workers = atoi(optarg);
+				break;
+			case 'p':
+				server_port = atoi(optarg);
+				break;
+			case 'f':
+				configuration_file = optarg;
+				break;
+			case 'c':
+				if (!strcmp(optarg, "pipelining"))
+					pipelining = true;
+				else if (!strcmp(optarg, "async"))
+					async = true;
+				else if (!strcmp(optarg, "fragmentation"))
+					fragmentation = true;
+				else
+					fprintf(stderr, "WARNING: unsupported capability '%s'\n", optarg);
+				break;
+			case 't':
+				if (!parse_processing_delay(optarg))
+					break;
+				fprintf(stderr, "%s: failed to parse time '%s'.\n", argv[0], optarg);
+				fprintf(stderr, "Try '%s -h' for more information.\n", argv[0]);
+				return EXIT_FAILURE;
+			default:
+				usage(argv[0]);
+				return EXIT_FAILURE;
+		}
+	}
+
+	if (!configuration_file) {
+		LOG(&null_worker, "ModSecurity configuration is required.\n");
+		goto error;
+	}
+
+	if (modsecurity_load(configuration_file) == -1)
+		goto error;
+
+	if (num_workers <= 0) {
+		LOG(&null_worker, "%s : Invalid number of workers '%d'\n",
+		    argv[0], num_workers);
+		goto error;
+	}
+
+	if (server_port <= 0) {
+		LOG(&null_worker, "%s : Invalid port '%d'\n",
+		    argv[0], server_port);
+		goto error;
+	}
+
+
+	if (evthread_use_pthreads() < 0) {
+		LOG(&null_worker, "No pthreads support for libevent");
+		goto error;
+	}
+
+	if ((base = event_base_new()) == NULL) {
+		LOG(&null_worker, "Failed to initialize libevent : %m");
+		goto error;
+	}
+
+	signal(SIGPIPE, SIG_IGN);
+
+	if ((fd = create_server_socket()) < 0) {
+		LOG(&null_worker, "Failed to create server socket");
+		goto error;
+	}
+	if (evutil_make_socket_nonblocking(fd) < 0) {
+		LOG(&null_worker, "Failed to set server socket to non-blocking");
+		goto error;
+	}
+
+	if ((workers = calloc(num_workers, sizeof(*workers))) == NULL) {
+		LOG(&null_worker, "Failed to set allocate memory for workers");
+		goto error;
+	}
+
+	for (i = 0; i < num_workers; ++i) {
+		struct worker *w = &workers[i];
+
+		w->id        = i+1;
+		w->nbclients = 0;
+		LIST_INIT(&w->engines);
+		LIST_INIT(&w->clients);
+		LIST_INIT(&w->frames);
+
+		if ((w->base = event_base_new()) == NULL) {
+			LOG(&null_worker,
+			    "Failed to initialize libevent for worker %02d : %m",
+			    w->id);
+			goto error;
+		}
+
+		w->monitor_event = event_new(w->base, fd, EV_PERSIST,
+					     worker_monitor_cb, (void *)w);
+		if (w->monitor_event == NULL ||
+		    event_add(w->monitor_event, (struct timeval[]){{5,0}}) < 0) {
+			LOG(&null_worker,
+			    "Failed to create monitor event for worker %02d",
+			    w->id);
+			goto error;
+		}
+
+		if (pthread_create(&w->thread, NULL, worker_function, (void *)w)) {
+			LOG(&null_worker,
+			    "Failed to start thread for worker %02d : %m",
+			    w->id);
+		}
+		DEBUG(&null_worker, "Worker %02d initialized", w->id);
+	}
+
+	accept_event = event_new(base, fd, EV_READ|EV_PERSIST, accept_cb,
+				 (void *)base);
+	if (accept_event == NULL || event_add(accept_event, NULL) < 0) {
+		LOG(&null_worker, "Failed to create accept event : %m");
+	}
+
+	signal_event = evsignal_new(base, SIGINT, signal_cb, (void *)base);
+	if (signal_event == NULL || event_add(signal_event, NULL) < 0) {
+		LOG(&null_worker, "Failed to create signal event : %m");
+	}
+
+	DEBUG(&null_worker,
+	      "Server is ready"
+	      " [fragmentation=%s - pipelining=%s - async=%s - debug=%s - max-frame-size=%u]",
+	      (fragmentation?"true":"false"), (pipelining?"true":"false"), (async?"true":"false"),
+	      (debug?"true":"false"), max_frame_size);
+	event_base_dispatch(base);
+
+	for (i = 0; i < num_workers; i++) {
+		struct worker *w = &workers[i];
+
+		pthread_join(w->thread, NULL);
+		DEBUG(&null_worker, "Worker %02d terminated", w->id);
+	}
+
+	free(workers);
+	event_free(signal_event);
+	event_free(accept_event);
+	event_base_free(base);
+	close(fd);
+	return EXIT_SUCCESS;
+
+  error:
+	if (workers != NULL)
+		free(workers);
+	if (signal_event != NULL)
+		event_free(signal_event);
+	if (accept_event != NULL)
+		event_free(accept_event);
+	if (base != NULL)
+		event_base_free(base);
+	if (fd != -1)
+		close(fd);
+	return EXIT_FAILURE;
+}
diff --git a/contrib/modsecurity/spoa.h b/contrib/modsecurity/spoa.h
new file mode 100644
index 0000000..daee6d2
--- /dev/null
+++ b/contrib/modsecurity/spoa.h
@@ -0,0 +1,53 @@
+/*
+ * Modsecurity wrapper for haproxy
+ *
+ * This file contains the headers of the bootstrap for laucnching and scheduling
+ * modsecurity for working with HAProxy SPOE protocol.
+ *
+ * Copyright 2016 OZON, Thierry Fournier <thierry.fournier@ozon.io>
+ *
+ * This file is inherited from "A Random IP reputation service acting as a Stream
+ * Processing Offload Agent"
+ *
+ * Copyright 2016 HAProxy Technologies, Christopher Faulet <cfaulet@haproxy.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __SPOA_H__
+#define __SPOA_H__
+
+#include <event2/util.h>
+#include <event2/event.h>
+#include <event2/event_struct.h>
+#include <event2/thread.h>
+
+struct worker {
+	pthread_t           thread;
+	int                 id;
+	struct event_base  *base;
+	struct event       *monitor_event;
+
+	struct list         engines;
+
+	unsigned int        nbclients;
+	struct list         clients;
+
+	struct list         frames;
+};
+
+#define LOG(worker, fmt, args...)                                       \
+	do {								\
+		struct timeval  now;					\
+                                                                        \
+		gettimeofday(&now, NULL);				\
+		fprintf(stderr, "%ld.%06ld [%02d] " fmt "\n",		\
+			now.tv_sec, now.tv_usec, (worker)->id, ##args);	\
+	} while (0)
+
+#endif /* __SPOA_H__ */
+
+extern struct worker null_worker;