/*
 * HTTP protocol analyzer
 *
 * Copyright (C) 2018 HAProxy Technologies, Christopher Faulet <cfaulet@haproxy.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 */

#include <common/base64.h>
#include <common/config.h>
#include <common/debug.h>
#include <common/uri_auth.h>

#include <types/cache.h>
#include <types/capture.h>

#include <proto/acl.h>
#include <proto/channel.h>
#include <proto/checks.h>
#include <proto/connection.h>
#include <proto/filters.h>
#include <proto/hdr_idx.h>
#include <proto/http_htx.h>
#include <proto/htx.h>
#include <proto/log.h>
#include <proto/proto_http.h>
#include <proto/proxy.h>
#include <proto/stream.h>
#include <proto/stream_interface.h>
#include <proto/stats.h>


static void htx_end_request(struct stream *s);
static void htx_end_response(struct stream *s);

static void htx_capture_headers(struct htx *htx, char **cap, struct cap_hdr *cap_hdr);
static int htx_del_hdr_value(char *start, char *end, char **from, char *next);
static size_t htx_fmt_req_line(const union h1_sl sl, char *str, size_t len);
static size_t htx_fmt_res_line(const union h1_sl sl, char *str, size_t len);
static void htx_debug_stline(const char *dir, struct stream *s, const union h1_sl sl);
static void htx_debug_hdr(const char *dir, struct stream *s, const struct ist n, const struct ist v);

/* This stream analyser waits for a complete HTTP request. It returns 1 if the
 * processing can continue on next analysers, or zero if it either needs more
 * data or wants to immediately abort the request (eg: timeout, error, ...). It
 * is tied to AN_REQ_WAIT_HTTP and may may remove itself from s->req.analysers
 * when it has nothing left to do, and may remove any analyser when it wants to
 * abort.
 */
int htx_wait_for_request(struct stream *s, struct channel *req, int an_bit)
{

	/*
	 * We will analyze a complete HTTP request to check the its syntax.
	 *
	 * Once the start line and all headers are received, we may perform a
	 * capture of the error (if any), and we will set a few fields. We also
	 * check for monitor-uri, logging and finally headers capture.
	 */
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->req;
	struct htx *htx;
	union h1_sl sl;

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		req,
		req->rex, req->wex,
		req->flags,
		ci_data(req),
		req->analysers);

	htx = htx_from_buf(&req->buf);

	/* we're speaking HTTP here, so let's speak HTTP to the client */
	s->srv_error = http_return_srv_error;

	/* If there is data available for analysis, log the end of the idle time. */
	if (c_data(req) && s->logs.t_idle == -1)
		s->logs.t_idle = tv_ms_elapsed(&s->logs.tv_accept, &now) - s->logs.t_handshake;

	/*
	 * Now we quickly check if we have found a full valid request.
	 * If not so, we check the FD and buffer states before leaving.
	 * A full request is indicated by the fact that we have seen
	 * the double LF/CRLF, so the state is >= HTTP_MSG_BODY. Invalid
	 * requests are checked first. When waiting for a second request
	 * on a keep-alive stream, if we encounter and error, close, t/o,
	 * we note the error in the stream flags but don't set any state.
	 * Since the error will be noted there, it will not be counted by
	 * process_stream() as a frontend error.
	 * Last, we may increase some tracked counters' http request errors on
	 * the cases that are deliberately the client's fault. For instance,
	 * a timeout or connection reset is not counted as an error. However
	 * a bad request is.
	 */
	if (unlikely(htx_is_empty(htx) || htx_get_tail_type(htx) < HTX_BLK_EOH)) {
		/* 1: have we encountered a read error ? */
		if (req->flags & CF_READ_ERROR) {
			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_CLICL;

			if (txn->flags & TX_WAIT_NEXT_RQ)
				goto failed_keep_alive;

			if (sess->fe->options & PR_O_IGNORE_PRB)
				goto failed_keep_alive;

			stream_inc_http_err_ctr(s);
			stream_inc_http_req_ctr(s);
			proxy_inc_fe_req_ctr(sess->fe);
			HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
			if (sess->listener->counters)
				HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

			txn->status = 400;
			msg->err_state = msg->msg_state;
			msg->msg_state = HTTP_MSG_ERROR;
			htx_reply_and_close(s, txn->status, NULL);
			req->analysers &= AN_REQ_FLT_END;

			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_R;
			return 0;
		}

		/* 2: has the read timeout expired ? */
		else if (req->flags & CF_READ_TIMEOUT || tick_is_expired(req->analyse_exp, now_ms)) {
			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_CLITO;

			if (txn->flags & TX_WAIT_NEXT_RQ)
				goto failed_keep_alive;

			if (sess->fe->options & PR_O_IGNORE_PRB)
				goto failed_keep_alive;

			stream_inc_http_err_ctr(s);
			stream_inc_http_req_ctr(s);
			proxy_inc_fe_req_ctr(sess->fe);
			HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
			if (sess->listener->counters)
				HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

			txn->status = 408;
			msg->err_state = msg->msg_state;
			msg->msg_state = HTTP_MSG_ERROR;
			htx_reply_and_close(s, txn->status, http_error_message(s));
			req->analysers &= AN_REQ_FLT_END;

			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_R;
			return 0;
		}

		/* 3: have we encountered a close ? */
		else if (req->flags & CF_SHUTR) {
			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_CLICL;

			if (txn->flags & TX_WAIT_NEXT_RQ)
				goto failed_keep_alive;

			if (sess->fe->options & PR_O_IGNORE_PRB)
				goto failed_keep_alive;

			stream_inc_http_err_ctr(s);
			stream_inc_http_req_ctr(s);
			proxy_inc_fe_req_ctr(sess->fe);
			HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
			if (sess->listener->counters)
				HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

			txn->status = 400;
			msg->err_state = msg->msg_state;
			msg->msg_state = HTTP_MSG_ERROR;
			htx_reply_and_close(s, txn->status, http_error_message(s));
			req->analysers &= AN_REQ_FLT_END;

			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_R;
			return 0;
		}

		channel_dont_connect(req);
		req->flags |= CF_READ_DONTWAIT; /* try to get back here ASAP */
		s->res.flags &= ~CF_EXPECT_MORE; /* speed up sending a previous response */
#ifdef TCP_QUICKACK
		if (sess->listener->options & LI_O_NOQUICKACK && htx_is_not_empty(htx) &&
		    objt_conn(sess->origin) && conn_ctrl_ready(__objt_conn(sess->origin))) {
			/* We need more data, we have to re-enable quick-ack in case we
			 * previously disabled it, otherwise we might cause the client
			 * to delay next data.
			 */
			setsockopt(__objt_conn(sess->origin)->handle.fd, IPPROTO_TCP, TCP_QUICKACK, &one, sizeof(one));
		}
#endif

		if ((msg->msg_state != HTTP_MSG_RQBEFORE) && (txn->flags & TX_WAIT_NEXT_RQ)) {
			/* If the client starts to talk, let's fall back to
			 * request timeout processing.
			 */
			txn->flags &= ~TX_WAIT_NEXT_RQ;
			req->analyse_exp = TICK_ETERNITY;
		}

		/* just set the request timeout once at the beginning of the request */
		if (!tick_isset(req->analyse_exp)) {
			if ((msg->msg_state == HTTP_MSG_RQBEFORE) &&
			    (txn->flags & TX_WAIT_NEXT_RQ) &&
			    tick_isset(s->be->timeout.httpka))
				req->analyse_exp = tick_add(now_ms, s->be->timeout.httpka);
			else
				req->analyse_exp = tick_add_ifset(now_ms, s->be->timeout.httpreq);
		}

		/* we're not ready yet */
		return 0;

	failed_keep_alive:
		/* Here we process low-level errors for keep-alive requests. In
		 * short, if the request is not the first one and it experiences
		 * a timeout, read error or shutdown, we just silently close so
		 * that the client can try again.
		 */
		txn->status = 0;
		msg->msg_state = HTTP_MSG_RQBEFORE;
		req->analysers &= AN_REQ_FLT_END;
		s->logs.logwait = 0;
		s->logs.level = 0;
		s->res.flags &= ~CF_EXPECT_MORE; /* speed up sending a previous response */
		htx_reply_and_close(s, txn->status, NULL);
		return 0;
	}

	msg->msg_state = HTTP_MSG_BODY;
	stream_inc_http_req_ctr(s);
	proxy_inc_fe_req_ctr(sess->fe); /* one more valid request for this FE */

	/* kill the pending keep-alive timeout */
	txn->flags &= ~TX_WAIT_NEXT_RQ;
	req->analyse_exp = TICK_ETERNITY;

	/* 0: we might have to print this header in debug mode */
	if (unlikely((global.mode & MODE_DEBUG) &&
		     (!(global.mode & MODE_QUIET) || (global.mode & MODE_VERBOSE)))) {
		int32_t pos;

		htx_debug_stline("clireq", s, http_find_stline(htx));

		for (pos = htx_get_head(htx); pos != -1; pos = htx_get_next(htx, pos)) {
			struct htx_blk *blk = htx_get_blk(htx, pos);
			enum htx_blk_type type = htx_get_blk_type(blk);

			if (type == HTX_BLK_EOH)
				break;
			if (type != HTX_BLK_HDR)
				continue;

			htx_debug_hdr("clihdr", s,
				  htx_get_blk_name(htx, blk),
				  htx_get_blk_value(htx, blk));
		}
	}

	/*
	 * 1: identify the method
	 */
	sl = http_find_stline(htx);
	txn->meth = sl.rq.meth;
	msg->flags |= HTTP_MSGF_XFER_LEN;

	/* ... and check if the request is HTTP/1.1 or above */
        if ((sl.rq.v.len == 8) &&
            ((*(sl.rq.v.ptr + 5) > '1') ||
             ((*(sl.rq.v.ptr + 5) == '1') && (*(sl.rq.v.ptr + 7) >= '1'))))
                msg->flags |= HTTP_MSGF_VER_11;

	/* we can make use of server redirect on GET and HEAD */
	if (txn->meth == HTTP_METH_GET || txn->meth == HTTP_METH_HEAD)
		s->flags |= SF_REDIRECTABLE;
	else if (txn->meth == HTTP_METH_OTHER && isteqi(sl.rq.m, ist("PRI"))) {
		/* PRI is reserved for the HTTP/2 preface */
		goto return_bad_req;
	}

	/*
	 * 2: check if the URI matches the monitor_uri.
	 * We have to do this for every request which gets in, because
	 * the monitor-uri is defined by the frontend.
	 */
	if (unlikely((sess->fe->monitor_uri_len != 0) &&
		     isteqi(sl.rq.u, ist2(sess->fe->monitor_uri, sess->fe->monitor_uri_len)))) {
		/*
		 * We have found the monitor URI
		 */
		struct acl_cond *cond;

		s->flags |= SF_MONITOR;
		HA_ATOMIC_ADD(&sess->fe->fe_counters.intercepted_req, 1);

		/* Check if we want to fail this monitor request or not */
		list_for_each_entry(cond, &sess->fe->mon_fail_cond, list) {
			int ret = acl_exec_cond(cond, sess->fe, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL);

			ret = acl_pass(ret);
			if (cond->pol == ACL_COND_UNLESS)
				ret = !ret;

			if (ret) {
				/* we fail this request, let's return 503 service unavail */
				txn->status = 503;
				htx_reply_and_close(s, txn->status, http_error_message(s));
				if (!(s->flags & SF_ERR_MASK))
					s->flags |= SF_ERR_LOCAL; /* we don't want a real error here */
				goto return_prx_cond;
			}
		}

		/* nothing to fail, let's reply normaly */
		txn->status = 200;
		htx_reply_and_close(s, txn->status, http_error_message(s));
		if (!(s->flags & SF_ERR_MASK))
			s->flags |= SF_ERR_LOCAL; /* we don't want a real error here */
		goto return_prx_cond;
	}

	/*
	 * 3: Maybe we have to copy the original REQURI for the logs ?
	 * Note: we cannot log anymore if the request has been
	 * classified as invalid.
	 */
	if (unlikely(s->logs.logwait & LW_REQ)) {
		/* we have a complete HTTP request that we must log */
		if ((txn->uri = pool_alloc(pool_head_requri)) != NULL) {
			size_t len;

			len = htx_fmt_req_line(sl, txn->uri, global.tune.requri_len - 1);
			txn->uri[len] = 0;

			if (!(s->logs.logwait &= ~(LW_REQ|LW_INIT)))
				s->do_log(s);
		} else {
			ha_alert("HTTP logging : out of memory.\n");
		}
	}

	/* if the frontend has "option http-use-proxy-header", we'll check if
	 * we have what looks like a proxied connection instead of a connection,
	 * and in this case set the TX_USE_PX_CONN flag to use Proxy-connection.
	 * Note that this is *not* RFC-compliant, however browsers and proxies
	 * happen to do that despite being non-standard :-(
	 * We consider that a request not beginning with either '/' or '*' is
	 * a proxied connection, which covers both "scheme://location" and
	 * CONNECT ip:port.
	 */
	if ((sess->fe->options2 & PR_O2_USE_PXHDR) &&
	    *(sl.rq.u.ptr) != '/' && *(sl.rq.u.ptr) != '*')
		txn->flags |= TX_USE_PX_CONN;

	/* 5: we may need to capture headers */
	if (unlikely((s->logs.logwait & LW_REQHDR) && s->req_cap))
		htx_capture_headers(htx, s->req_cap, sess->fe->req_cap);

	/* Until set to anything else, the connection mode is set as Keep-Alive. It will
	 * only change if both the request and the config reference something else.
	 * Option httpclose by itself sets tunnel mode where headers are mangled.
	 * However, if another mode is set, it will affect it (eg: server-close/
	 * keep-alive + httpclose = close). Note that we avoid to redo the same work
	 * if FE and BE have the same settings (common). The method consists in
	 * checking if options changed between the two calls (implying that either
	 * one is non-null, or one of them is non-null and we are there for the first
	 * time.
	 */
	if ((sess->fe->options & PR_O_HTTP_MODE) != (s->be->options & PR_O_HTTP_MODE))
		htx_adjust_conn_mode(s, txn);

	/* we may have to wait for the request's body */
	if (s->be->options & PR_O_WREQ_BODY)
		req->analysers |= AN_REQ_HTTP_BODY;

	/*
	 * RFC7234#4:
	 *   A cache MUST write through requests with methods
	 *   that are unsafe (Section 4.2.1 of [RFC7231]) to
	 *   the origin server; i.e., a cache is not allowed
	 *   to generate a reply to such a request before
	 *   having forwarded the request and having received
	 *   a corresponding response.
	 *
	 * RFC7231#4.2.1:
	 *   Of the request methods defined by this
	 *   specification, the GET, HEAD, OPTIONS, and TRACE
	 *   methods are defined to be safe.
	 */
	if (likely(txn->meth == HTTP_METH_GET ||
		   txn->meth == HTTP_METH_HEAD ||
		   txn->meth == HTTP_METH_OPTIONS ||
		   txn->meth == HTTP_METH_TRACE))
		txn->flags |= TX_CACHEABLE | TX_CACHE_COOK;

	/* end of job, return OK */
	req->analysers &= ~an_bit;
	req->analyse_exp = TICK_ETERNITY;

	return 1;

 return_bad_req:
	txn->status = 400;
	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	htx_reply_and_close(s, txn->status, http_error_message(s));
	HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

 return_prx_cond:
	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_R;

	req->analysers &= AN_REQ_FLT_END;
	req->analyse_exp = TICK_ETERNITY;
	return 0;
}


/* This stream analyser runs all HTTP request processing which is common to
 * frontends and backends, which means blocking ACLs, filters, connection-close,
 * reqadd, stats and redirects. This is performed for the designated proxy.
 * It returns 1 if the processing can continue on next analysers, or zero if it
 * either needs more data or wants to immediately abort the request (eg: deny,
 * error, ...).
 */
int htx_process_req_common(struct stream *s, struct channel *req, int an_bit, struct proxy *px)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->req;
	struct redirect_rule *rule;
	struct cond_wordlist *wl;
	enum rule_result verdict;
	int deny_status = HTTP_ERR_403;
	struct connection *conn = objt_conn(sess->origin);

	// TODO: Disabled for now
	req->analyse_exp = TICK_ETERNITY;
	req->analysers &= ~an_bit;
	return 1;

	if (unlikely(msg->msg_state < HTTP_MSG_BODY)) {
		/* we need more data */
		goto return_prx_yield;
	}

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		req,
		req->rex, req->wex,
		req->flags,
		ci_data(req),
		req->analysers);

	/* just in case we have some per-backend tracking */
	stream_inc_be_http_req_ctr(s);

	/* evaluate http-request rules */
	if (!LIST_ISEMPTY(&px->http_req_rules)) {
		verdict = http_req_get_intercept_rule(px, &px->http_req_rules, s, &deny_status);

		switch (verdict) {
		case HTTP_RULE_RES_YIELD: /* some data miss, call the function later. */
			goto return_prx_yield;

		case HTTP_RULE_RES_CONT:
		case HTTP_RULE_RES_STOP: /* nothing to do */
			break;

		case HTTP_RULE_RES_DENY: /* deny or tarpit */
			if (txn->flags & TX_CLTARPIT)
				goto tarpit;
			goto deny;

		case HTTP_RULE_RES_ABRT: /* abort request, response already sent. Eg: auth */
			goto return_prx_cond;

		case HTTP_RULE_RES_DONE: /* OK, but terminate request processing (eg: redirect) */
			goto done;

		case HTTP_RULE_RES_BADREQ: /* failed with a bad request */
			goto return_bad_req;
		}
	}

	if (conn && (conn->flags & CO_FL_EARLY_DATA) &&
	    (conn->flags & (CO_FL_EARLY_SSL_HS | CO_FL_HANDSHAKE))) {
		struct hdr_ctx ctx;

		ctx.idx = 0;
		if (!http_find_header2("Early-Data", strlen("Early-Data"),
		    ci_head(&s->req), &txn->hdr_idx, &ctx)) {
			if (unlikely(http_header_add_tail2(&txn->req,
			    &txn->hdr_idx, "Early-Data: 1",
			    strlen("Early-Data: 1")) < 0)) {
				goto return_bad_req;
			 }
		}

	}

	/* OK at this stage, we know that the request was accepted according to
	 * the http-request rules, we can check for the stats. Note that the
	 * URI is detected *before* the req* rules in order not to be affected
	 * by a possible reqrep, while they are processed *after* so that a
	 * reqdeny can still block them. This clearly needs to change in 1.6!
	 */
	if (stats_check_uri(&s->si[1], txn, px)) {
		s->target = &http_stats_applet.obj_type;
		if (unlikely(!stream_int_register_handler(&s->si[1], objt_applet(s->target)))) {
			txn->status = 500;
			s->logs.tv_request = now;
			http_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_RESOURCE;
			goto return_prx_cond;
		}

		/* parse the whole stats request and extract the relevant information */
		http_handle_stats(s, req);
		verdict = http_req_get_intercept_rule(px, &px->uri_auth->http_req_rules, s, &deny_status);
		/* not all actions implemented: deny, allow, auth */

		if (verdict == HTTP_RULE_RES_DENY) /* stats http-request deny */
			goto deny;

		if (verdict == HTTP_RULE_RES_ABRT) /* stats auth / stats http-request auth */
			goto return_prx_cond;
	}

	/* evaluate the req* rules except reqadd */
	if (px->req_exp != NULL) {
		if (apply_filters_to_request(s, req, px) < 0)
			goto return_bad_req;

		if (txn->flags & TX_CLDENY)
			goto deny;

		if (txn->flags & TX_CLTARPIT) {
			deny_status = HTTP_ERR_500;
			goto tarpit;
		}
	}

	/* add request headers from the rule sets in the same order */
	list_for_each_entry(wl, &px->req_add, list) {
		if (wl->cond) {
			int ret = acl_exec_cond(wl->cond, px, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL);
			ret = acl_pass(ret);
			if (((struct acl_cond *)wl->cond)->pol == ACL_COND_UNLESS)
				ret = !ret;
			if (!ret)
				continue;
		}

		if (unlikely(http_header_add_tail2(&txn->req, &txn->hdr_idx, wl->s, strlen(wl->s)) < 0))
			goto return_bad_req;
	}


	/* Proceed with the stats now. */
	if (unlikely(objt_applet(s->target) == &http_stats_applet) ||
	    unlikely(objt_applet(s->target) == &http_cache_applet)) {
		/* process the stats request now */
		if (sess->fe == s->be) /* report it if the request was intercepted by the frontend */
			HA_ATOMIC_ADD(&sess->fe->fe_counters.intercepted_req, 1);

		if (!(s->flags & SF_ERR_MASK))      // this is not really an error but it is
			s->flags |= SF_ERR_LOCAL;   // to mark that it comes from the proxy
		if (!(s->flags & SF_FINST_MASK))
			s->flags |= SF_FINST_R;

		/* enable the minimally required analyzers to handle keep-alive and compression on the HTTP response */
		req->analysers &= (AN_REQ_HTTP_BODY | AN_REQ_FLT_HTTP_HDRS | AN_REQ_FLT_END);
		req->analysers &= ~AN_REQ_FLT_XFER_DATA;
		req->analysers |= AN_REQ_HTTP_XFER_BODY;
		goto done;
	}

	/* check whether we have some ACLs set to redirect this request */
	list_for_each_entry(rule, &px->redirect_rules, list) {
		if (rule->cond) {
			int ret;

			ret = acl_exec_cond(rule->cond, px, sess, s, SMP_OPT_DIR_REQ|SMP_OPT_FINAL);
			ret = acl_pass(ret);
			if (rule->cond->pol == ACL_COND_UNLESS)
				ret = !ret;
			if (!ret)
				continue;
		}
		if (!htx_apply_redirect_rule(rule, s, txn))
			goto return_bad_req;
		goto done;
	}

	/* POST requests may be accompanied with an "Expect: 100-Continue" header.
	 * If this happens, then the data will not come immediately, so we must
	 * send all what we have without waiting. Note that due to the small gain
	 * in waiting for the body of the request, it's easier to simply put the
	 * CF_SEND_DONTWAIT flag any time. It's a one-shot flag so it will remove
	 * itself once used.
	 */
	req->flags |= CF_SEND_DONTWAIT;

 done:	/* done with this analyser, continue with next ones that the calling
	 * points will have set, if any.
	 */
	req->analyse_exp = TICK_ETERNITY;
 done_without_exp: /* done with this analyser, but dont reset the analyse_exp. */
	req->analysers &= ~an_bit;
	return 1;

 tarpit:
	/* Allow cookie logging
	 */
	if (s->be->cookie_name || sess->fe->capture_name)
		manage_client_side_cookies(s, req);

	/* When a connection is tarpitted, we use the tarpit timeout,
	 * which may be the same as the connect timeout if unspecified.
	 * If unset, then set it to zero because we really want it to
	 * eventually expire. We build the tarpit as an analyser.
	 */
	channel_erase(&s->req);

	/* wipe the request out so that we can drop the connection early
	 * if the client closes first.
	 */
	channel_dont_connect(req);

	txn->status = http_err_codes[deny_status];

	req->analysers &= AN_REQ_FLT_END; /* remove switching rules etc... */
	req->analysers |= AN_REQ_HTTP_TARPIT;
	req->analyse_exp = tick_add_ifset(now_ms,  s->be->timeout.tarpit);
	if (!req->analyse_exp)
		req->analyse_exp = tick_add(now_ms, 0);
	stream_inc_http_err_ctr(s);
	HA_ATOMIC_ADD(&sess->fe->fe_counters.denied_req, 1);
	if (sess->fe != s->be)
		HA_ATOMIC_ADD(&s->be->be_counters.denied_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->denied_req, 1);
	goto done_without_exp;

 deny:	/* this request was blocked (denied) */

	/* Allow cookie logging
	 */
	if (s->be->cookie_name || sess->fe->capture_name)
		manage_client_side_cookies(s, req);

	txn->flags |= TX_CLDENY;
	txn->status = http_err_codes[deny_status];
	s->logs.tv_request = now;
	http_reply_and_close(s, txn->status, http_error_message(s));
	stream_inc_http_err_ctr(s);
	HA_ATOMIC_ADD(&sess->fe->fe_counters.denied_req, 1);
	if (sess->fe != s->be)
		HA_ATOMIC_ADD(&s->be->be_counters.denied_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->denied_req, 1);
	goto return_prx_cond;

 return_bad_req:
	/* We centralize bad requests processing here */
	if (unlikely(msg->msg_state == HTTP_MSG_ERROR) || msg->err_pos >= 0) {
		/* we detected a parsing error. We want to archive this request
		 * in the dedicated proxy area for later troubleshooting.
		 */
		http_capture_bad_message(sess->fe, s, msg, msg->err_state, sess->fe);
	}

	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	txn->status = 400;
	http_reply_and_close(s, txn->status, http_error_message(s));

	HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

 return_prx_cond:
	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_R;

	req->analysers &= AN_REQ_FLT_END;
	req->analyse_exp = TICK_ETERNITY;
	return 0;

 return_prx_yield:
	channel_dont_connect(req);
	return 0;
}

/* This function performs all the processing enabled for the current request.
 * It returns 1 if the processing can continue on next analysers, or zero if it
 * needs more data, encounters an error, or wants to immediately abort the
 * request. It relies on buffers flags, and updates s->req.analysers.
 */
int htx_process_request(struct stream *s, struct channel *req, int an_bit)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->req;
	struct connection *cli_conn = objt_conn(strm_sess(s)->origin);

	// TODO: Disabled for now
	req->analysers &= ~AN_REQ_FLT_XFER_DATA;
	req->analysers |= AN_REQ_HTTP_XFER_BODY;
	req->analyse_exp = TICK_ETERNITY;
	req->analysers &= ~an_bit;
	return 1;

	if (unlikely(msg->msg_state < HTTP_MSG_BODY)) {
		/* we need more data */
		channel_dont_connect(req);
		return 0;
	}

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		req,
		req->rex, req->wex,
		req->flags,
		ci_data(req),
		req->analysers);

	/*
	 * Right now, we know that we have processed the entire headers
	 * and that unwanted requests have been filtered out. We can do
	 * whatever we want with the remaining request. Also, now we
	 * may have separate values for ->fe, ->be.
	 */

	/*
	 * If HTTP PROXY is set we simply get remote server address parsing
	 * incoming request. Note that this requires that a connection is
	 * allocated on the server side.
	 */
	if ((s->be->options & PR_O_HTTP_PROXY) && !(s->flags & SF_ADDR_SET)) {
		struct connection *conn;
		char *path;

		/* Note that for now we don't reuse existing proxy connections */
		if (unlikely((conn = cs_conn(si_alloc_cs(&s->si[1], NULL))) == NULL)) {
			txn->req.err_state = txn->req.msg_state;
			txn->req.msg_state = HTTP_MSG_ERROR;
			txn->status = 500;
			req->analysers &= AN_REQ_FLT_END;
			http_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_RESOURCE;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_R;

			return 0;
		}

		path = http_txn_get_path(txn);
		if (url2sa(ci_head(req) + msg->sl.rq.u,
			   path ? path - (ci_head(req) + msg->sl.rq.u) : msg->sl.rq.u_l,
			   &conn->addr.to, NULL) == -1)
			goto return_bad_req;

		/* if the path was found, we have to remove everything between
		 * ci_head(req) + msg->sl.rq.u and path (excluded). If it was not
		 * found, we need to replace from ci_head(req) + msg->sl.rq.u for
		 * u_l characters by a single "/".
		 */
		if (path) {
			char *cur_ptr = ci_head(req);
			char *cur_end = cur_ptr + txn->req.sl.rq.l;
			int delta;

			delta = b_rep_blk(&req->buf, cur_ptr + msg->sl.rq.u, path, NULL, 0);
			http_msg_move_end(&txn->req, delta);
			cur_end += delta;
			if (http_parse_reqline(&txn->req, HTTP_MSG_RQMETH,  cur_ptr, cur_end + 1, NULL, NULL) == NULL)
				goto return_bad_req;
		}
		else {
			char *cur_ptr = ci_head(req);
			char *cur_end = cur_ptr + txn->req.sl.rq.l;
			int delta;

			delta = b_rep_blk(&req->buf, cur_ptr + msg->sl.rq.u,
						cur_ptr + msg->sl.rq.u + msg->sl.rq.u_l, "/", 1);
			http_msg_move_end(&txn->req, delta);
			cur_end += delta;
			if (http_parse_reqline(&txn->req, HTTP_MSG_RQMETH,  cur_ptr, cur_end + 1, NULL, NULL) == NULL)
				goto return_bad_req;
		}
	}

	/*
	 * 7: Now we can work with the cookies.
	 * Note that doing so might move headers in the request, but
	 * the fields will stay coherent and the URI will not move.
	 * This should only be performed in the backend.
	 */
	if (s->be->cookie_name || sess->fe->capture_name)
		manage_client_side_cookies(s, req);

	/* add unique-id if "header-unique-id" is specified */

	if (!LIST_ISEMPTY(&sess->fe->format_unique_id) && !s->unique_id) {
		if ((s->unique_id = pool_alloc(pool_head_uniqueid)) == NULL)
			goto return_bad_req;
		s->unique_id[0] = '\0';
		build_logline(s, s->unique_id, UNIQUEID_LEN, &sess->fe->format_unique_id);
	}

	if (sess->fe->header_unique_id && s->unique_id) {
		if (chunk_printf(&trash, "%s: %s", sess->fe->header_unique_id, s->unique_id) < 0)
			goto return_bad_req;
		if (unlikely(http_header_add_tail2(&txn->req, &txn->hdr_idx, trash.area, trash.data) < 0))
		   goto return_bad_req;
	}

	/*
	 * 9: add X-Forwarded-For if either the frontend or the backend
	 * asks for it.
	 */
	if ((sess->fe->options | s->be->options) & PR_O_FWDFOR) {
		struct hdr_ctx ctx = { .idx = 0 };
		if (!((sess->fe->options | s->be->options) & PR_O_FF_ALWAYS) &&
			http_find_header2(s->be->fwdfor_hdr_len ? s->be->fwdfor_hdr_name : sess->fe->fwdfor_hdr_name,
			                  s->be->fwdfor_hdr_len ? s->be->fwdfor_hdr_len : sess->fe->fwdfor_hdr_len,
			                  ci_head(req), &txn->hdr_idx, &ctx)) {
			/* The header is set to be added only if none is present
			 * and we found it, so don't do anything.
			 */
		}
		else if (cli_conn && cli_conn->addr.from.ss_family == AF_INET) {
			/* Add an X-Forwarded-For header unless the source IP is
			 * in the 'except' network range.
			 */
			if ((!sess->fe->except_mask.s_addr ||
			     (((struct sockaddr_in *)&cli_conn->addr.from)->sin_addr.s_addr & sess->fe->except_mask.s_addr)
			     != sess->fe->except_net.s_addr) &&
			    (!s->be->except_mask.s_addr ||
			     (((struct sockaddr_in *)&cli_conn->addr.from)->sin_addr.s_addr & s->be->except_mask.s_addr)
			     != s->be->except_net.s_addr)) {
				int len;
				unsigned char *pn;
				pn = (unsigned char *)&((struct sockaddr_in *)&cli_conn->addr.from)->sin_addr;

				/* Note: we rely on the backend to get the header name to be used for
				 * x-forwarded-for, because the header is really meant for the backends.
				 * However, if the backend did not specify any option, we have to rely
				 * on the frontend's header name.
				 */
				if (s->be->fwdfor_hdr_len) {
					len = s->be->fwdfor_hdr_len;
					memcpy(trash.area,
					       s->be->fwdfor_hdr_name, len);
				} else {
					len = sess->fe->fwdfor_hdr_len;
					memcpy(trash.area,
					       sess->fe->fwdfor_hdr_name, len);
				}
				len += snprintf(trash.area + len,
						trash.size - len,
						": %d.%d.%d.%d", pn[0], pn[1],
						pn[2], pn[3]);

				if (unlikely(http_header_add_tail2(&txn->req, &txn->hdr_idx, trash.area, len) < 0))
					goto return_bad_req;
			}
		}
		else if (cli_conn && cli_conn->addr.from.ss_family == AF_INET6) {
			/* FIXME: for the sake of completeness, we should also support
			 * 'except' here, although it is mostly useless in this case.
			 */
			int len;
			char pn[INET6_ADDRSTRLEN];
			inet_ntop(AF_INET6,
				  (const void *)&((struct sockaddr_in6 *)(&cli_conn->addr.from))->sin6_addr,
				  pn, sizeof(pn));

			/* Note: we rely on the backend to get the header name to be used for
			 * x-forwarded-for, because the header is really meant for the backends.
			 * However, if the backend did not specify any option, we have to rely
			 * on the frontend's header name.
			 */
			if (s->be->fwdfor_hdr_len) {
				len = s->be->fwdfor_hdr_len;
				memcpy(trash.area, s->be->fwdfor_hdr_name,
				       len);
			} else {
				len = sess->fe->fwdfor_hdr_len;
				memcpy(trash.area, sess->fe->fwdfor_hdr_name,
				       len);
			}
			len += snprintf(trash.area + len, trash.size - len,
					": %s", pn);

			if (unlikely(http_header_add_tail2(&txn->req, &txn->hdr_idx, trash.area, len) < 0))
				goto return_bad_req;
		}
	}

	/*
	 * 10: add X-Original-To if either the frontend or the backend
	 * asks for it.
	 */
	if ((sess->fe->options | s->be->options) & PR_O_ORGTO) {

		/* FIXME: don't know if IPv6 can handle that case too. */
		if (cli_conn && cli_conn->addr.from.ss_family == AF_INET) {
			/* Add an X-Original-To header unless the destination IP is
			 * in the 'except' network range.
			 */
			conn_get_to_addr(cli_conn);

			if (cli_conn->addr.to.ss_family == AF_INET &&
			    ((!sess->fe->except_mask_to.s_addr ||
			      (((struct sockaddr_in *)&cli_conn->addr.to)->sin_addr.s_addr & sess->fe->except_mask_to.s_addr)
			      != sess->fe->except_to.s_addr) &&
			     (!s->be->except_mask_to.s_addr ||
			      (((struct sockaddr_in *)&cli_conn->addr.to)->sin_addr.s_addr & s->be->except_mask_to.s_addr)
			      != s->be->except_to.s_addr))) {
				int len;
				unsigned char *pn;
				pn = (unsigned char *)&((struct sockaddr_in *)&cli_conn->addr.to)->sin_addr;

				/* Note: we rely on the backend to get the header name to be used for
				 * x-original-to, because the header is really meant for the backends.
				 * However, if the backend did not specify any option, we have to rely
				 * on the frontend's header name.
				 */
				if (s->be->orgto_hdr_len) {
					len = s->be->orgto_hdr_len;
					memcpy(trash.area,
					       s->be->orgto_hdr_name, len);
				} else {
					len = sess->fe->orgto_hdr_len;
					memcpy(trash.area,
					       sess->fe->orgto_hdr_name, len);
				}
				len += snprintf(trash.area + len,
						trash.size - len,
						": %d.%d.%d.%d", pn[0], pn[1],
						pn[2], pn[3]);

				if (unlikely(http_header_add_tail2(&txn->req, &txn->hdr_idx, trash.area, len) < 0))
					goto return_bad_req;
			}
		}
	}

	/* If we have no server assigned yet and we're balancing on url_param
	 * with a POST request, we may be interested in checking the body for
	 * that parameter. This will be done in another analyser.
	 */
	if (!(s->flags & (SF_ASSIGNED|SF_DIRECT)) &&
	    s->txn->meth == HTTP_METH_POST && s->be->url_param_name != NULL &&
	    (msg->flags & (HTTP_MSGF_CNT_LEN|HTTP_MSGF_TE_CHNK))) {
		channel_dont_connect(req);
		req->analysers |= AN_REQ_HTTP_BODY;
	}

	req->analysers &= ~AN_REQ_FLT_XFER_DATA;
	req->analysers |= AN_REQ_HTTP_XFER_BODY;
#ifdef TCP_QUICKACK
	/* We expect some data from the client. Unless we know for sure
	 * we already have a full request, we have to re-enable quick-ack
	 * in case we previously disabled it, otherwise we might cause
	 * the client to delay further data.
	 */
	if ((sess->listener->options & LI_O_NOQUICKACK) &&
	    cli_conn && conn_ctrl_ready(cli_conn) &&
	    ((msg->flags & HTTP_MSGF_TE_CHNK) ||
	     (msg->body_len > ci_data(req) - txn->req.eoh - 2)))
		setsockopt(cli_conn->handle.fd, IPPROTO_TCP, TCP_QUICKACK, &one, sizeof(one));
#endif

	/*************************************************************
	 * OK, that's finished for the headers. We have done what we *
	 * could. Let's switch to the DATA state.                    *
	 ************************************************************/
	req->analyse_exp = TICK_ETERNITY;
	req->analysers &= ~an_bit;

	s->logs.tv_request = now;
	/* OK let's go on with the BODY now */
	return 1;

 return_bad_req: /* let's centralize all bad requests */
	if (unlikely(msg->msg_state == HTTP_MSG_ERROR) || msg->err_pos >= 0) {
		/* we detected a parsing error. We want to archive this request
		 * in the dedicated proxy area for later troubleshooting.
		 */
		http_capture_bad_message(sess->fe, s, msg, msg->err_state, sess->fe);
	}

	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	txn->status = 400;
	req->analysers &= AN_REQ_FLT_END;
	http_reply_and_close(s, txn->status, http_error_message(s));

	HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_R;
	return 0;
}

/* This function is an analyser which processes the HTTP tarpit. It always
 * returns zero, at the beginning because it prevents any other processing
 * from occurring, and at the end because it terminates the request.
 */
int htx_process_tarpit(struct stream *s, struct channel *req, int an_bit)
{
	struct http_txn *txn = s->txn;

	// TODO: Disabled for now
	req->analyse_exp = TICK_ETERNITY;
	req->analysers &= ~an_bit;
	return 1;

	/* This connection is being tarpitted. The CLIENT side has
	 * already set the connect expiration date to the right
	 * timeout. We just have to check that the client is still
	 * there and that the timeout has not expired.
	 */
	channel_dont_connect(req);
	if ((req->flags & (CF_SHUTR|CF_READ_ERROR)) == 0 &&
	    !tick_is_expired(req->analyse_exp, now_ms))
		return 0;

	/* We will set the queue timer to the time spent, just for
	 * logging purposes. We fake a 500 server error, so that the
	 * attacker will not suspect his connection has been tarpitted.
	 * It will not cause trouble to the logs because we can exclude
	 * the tarpitted connections by filtering on the 'PT' status flags.
	 */
	s->logs.t_queue = tv_ms_elapsed(&s->logs.tv_accept, &now);

	if (!(req->flags & CF_READ_ERROR))
		http_reply_and_close(s, txn->status, http_error_message(s));

	req->analysers &= AN_REQ_FLT_END;
	req->analyse_exp = TICK_ETERNITY;

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_T;
	return 0;
}

/* This function is an analyser which waits for the HTTP request body. It waits
 * for either the buffer to be full, or the full advertised contents to have
 * reached the buffer. It must only be called after the standard HTTP request
 * processing has occurred, because it expects the request to be parsed and will
 * look for the Expect header. It may send a 100-Continue interim response. It
 * takes in input any state starting from HTTP_MSG_BODY and leaves with one of
 * HTTP_MSG_CHK_SIZE, HTTP_MSG_DATA or HTTP_MSG_TRAILERS. It returns zero if it
 * needs to read more data, or 1 once it has completed its analysis.
 */
int htx_wait_for_request_body(struct stream *s, struct channel *req, int an_bit)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &s->txn->req;

	// TODO: Disabled for now
	req->analyse_exp = TICK_ETERNITY;
	req->analysers &= ~an_bit;
	return 1;

	/* We have to parse the HTTP request body to find any required data.
	 * "balance url_param check_post" should have been the only way to get
	 * into this. We were brought here after HTTP header analysis, so all
	 * related structures are ready.
	 */

	if (msg->msg_state < HTTP_MSG_CHUNK_SIZE) {
		/* This is the first call */
		if (msg->msg_state < HTTP_MSG_BODY)
			goto missing_data;

		if (msg->msg_state < HTTP_MSG_100_SENT) {
			/* If we have HTTP/1.1 and Expect: 100-continue, then we must
			 * send an HTTP/1.1 100 Continue intermediate response.
			 */
			if (msg->flags & HTTP_MSGF_VER_11) {
				struct hdr_ctx ctx;
				ctx.idx = 0;
				/* Expect is allowed in 1.1, look for it */
				if (http_find_header2("Expect", 6, ci_head(req), &txn->hdr_idx, &ctx) &&
				    unlikely(ctx.vlen == 12 && strncasecmp(ctx.line+ctx.val, "100-continue", 12) == 0)) {
					co_inject(&s->res, HTTP_100.ptr, HTTP_100.len);
					http_remove_header2(&txn->req, &txn->hdr_idx, &ctx);
				}
			}
			msg->msg_state = HTTP_MSG_100_SENT;
		}

		/* we have msg->sov which points to the first byte of message body.
		 * ci_head(req) still points to the beginning of the message. We
		 * must save the body in msg->next because it survives buffer
		 * re-alignments.
		 */
		msg->next = msg->sov;

		if (msg->flags & HTTP_MSGF_TE_CHNK)
			msg->msg_state = HTTP_MSG_CHUNK_SIZE;
		else
			msg->msg_state = HTTP_MSG_DATA;
	}

	if (!(msg->flags & HTTP_MSGF_TE_CHNK)) {
		/* We're in content-length mode, we just have to wait for enough data. */
		if (http_body_bytes(msg) < msg->body_len)
			goto missing_data;

		/* OK we have everything we need now */
		goto http_end;
	}

	/* OK here we're parsing a chunked-encoded message */

	if (msg->msg_state == HTTP_MSG_CHUNK_SIZE) {
		/* read the chunk size and assign it to ->chunk_len, then
		 * set ->sov and ->next to point to the body and switch to DATA or
		 * TRAILERS state.
		 */
		unsigned int chunk;
		int ret = h1_parse_chunk_size(&req->buf, co_data(req) + msg->next, c_data(req), &chunk);

		if (!ret)
			goto missing_data;
		else if (ret < 0) {
			msg->err_pos = ci_data(req) + ret;
			if (msg->err_pos < 0)
				msg->err_pos += req->buf.size;
			stream_inc_http_err_ctr(s);
			goto return_bad_req;
		}

		msg->chunk_len = chunk;
		msg->body_len += chunk;

		msg->sol = ret;
		msg->next += ret;
		msg->msg_state = msg->chunk_len ? HTTP_MSG_DATA : HTTP_MSG_TRAILERS;
	}

	/* Now we're in HTTP_MSG_DATA or HTTP_MSG_TRAILERS state.
	 * We have the first data byte is in msg->sov + msg->sol. We're waiting
	 * for at least a whole chunk or the whole content length bytes after
	 * msg->sov + msg->sol.
	 */
	if (msg->msg_state == HTTP_MSG_TRAILERS)
		goto http_end;

	if (http_body_bytes(msg) >= msg->body_len)   /* we have enough bytes now */
		goto http_end;

 missing_data:
	/* we get here if we need to wait for more data. If the buffer is full,
	 * we have the maximum we can expect.
	 */
	if (channel_full(req, global.tune.maxrewrite))
		goto http_end;

	if ((req->flags & CF_READ_TIMEOUT) || tick_is_expired(req->analyse_exp, now_ms)) {
		txn->status = 408;
		http_reply_and_close(s, txn->status, http_error_message(s));

		if (!(s->flags & SF_ERR_MASK))
			s->flags |= SF_ERR_CLITO;
		if (!(s->flags & SF_FINST_MASK))
			s->flags |= SF_FINST_D;
		goto return_err_msg;
	}

	/* we get here if we need to wait for more data */
	if (!(req->flags & (CF_SHUTR | CF_READ_ERROR))) {
		/* Not enough data. We'll re-use the http-request
		 * timeout here. Ideally, we should set the timeout
		 * relative to the accept() date. We just set the
		 * request timeout once at the beginning of the
		 * request.
		 */
		channel_dont_connect(req);
		if (!tick_isset(req->analyse_exp))
			req->analyse_exp = tick_add_ifset(now_ms, s->be->timeout.httpreq);
		return 0;
	}

 http_end:
	/* The situation will not evolve, so let's give up on the analysis. */
	s->logs.tv_request = now;  /* update the request timer to reflect full request */
	req->analysers &= ~an_bit;
	req->analyse_exp = TICK_ETERNITY;
	return 1;

 return_bad_req: /* let's centralize all bad requests */
	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	txn->status = 400;
	http_reply_and_close(s, txn->status, http_error_message(s));

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_R;

 return_err_msg:
	req->analysers &= AN_REQ_FLT_END;
	HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);
	return 0;
}

/* This function is an analyser which forwards request body (including chunk
 * sizes if any). It is called as soon as we must forward, even if we forward
 * zero byte. The only situation where it must not be called is when we're in
 * tunnel mode and we want to forward till the close. It's used both to forward
 * remaining data and to resync after end of body. It expects the msg_state to
 * be between MSG_BODY and MSG_DONE (inclusive). It returns zero if it needs to
 * read more data, or 1 once we can go on with next request or end the stream.
 * When in MSG_DATA or MSG_TRAILERS, it will automatically forward chunk_len
 * bytes of pending data + the headers if not already done.
 */
int htx_request_forward_body(struct stream *s, struct channel *req, int an_bit)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->req;
	struct htx *htx;
	//int ret;

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		req,
		req->rex, req->wex,
		req->flags,
		ci_data(req),
		req->analysers);

	htx = htx_from_buf(&req->buf);

	if ((req->flags & (CF_READ_ERROR|CF_READ_TIMEOUT|CF_WRITE_ERROR|CF_WRITE_TIMEOUT)) ||
	    ((req->flags & CF_SHUTW) && (req->to_forward || co_data(req)))) {
		/* Output closed while we were sending data. We must abort and
		 * wake the other side up.
		 */
		msg->err_state = msg->msg_state;
		msg->msg_state = HTTP_MSG_ERROR;
		htx_end_request(s);
		htx_end_response(s);
		return 1;
	}

	/* Note that we don't have to send 100-continue back because we don't
	 * need the data to complete our job, and it's up to the server to
	 * decide whether to return 100, 417 or anything else in return of
	 * an "Expect: 100-continue" header.
	 */
	if (msg->msg_state == HTTP_MSG_BODY)
		msg->msg_state = HTTP_MSG_DATA;

	/* Some post-connect processing might want us to refrain from starting to
	 * forward data. Currently, the only reason for this is "balance url_param"
	 * whichs need to parse/process the request after we've enabled forwarding.
	 */
	if (unlikely(msg->flags & HTTP_MSGF_WAIT_CONN)) {
		if (!(s->res.flags & CF_READ_ATTACHED)) {
			channel_auto_connect(req);
			req->flags |= CF_WAKE_CONNECT;
			channel_dont_close(req); /* don't fail on early shutr */
			goto waiting;
		}
		msg->flags &= ~HTTP_MSGF_WAIT_CONN;
	}

	/* in most states, we should abort in case of early close */
	channel_auto_close(req);

	if (req->to_forward) {
		/* We can't process the buffer's contents yet */
		req->flags |= CF_WAKE_WRITE;
		goto missing_data_or_waiting;
	}

	if (msg->msg_state >= HTTP_MSG_DONE)
		goto done;

	/* Forward all input data. We get it by removing all outgoing data not
	 * forwarded yet from HTX data size.
	 */
	c_adv(req, htx->data - co_data(req));

	/* To let the function channel_forward work as expected we must update
	 * the channel's buffer to pretend there is no more input data. The
	 * right length is then restored. We must do that, because when an HTX
	 * message is stored into a buffer, it appears as full.
	 */
	b_set_data(&req->buf, co_data(req));
	if (htx->extra != ULLONG_MAX)
		htx->extra -= channel_forward(req, htx->extra);
	b_set_data(&req->buf, b_size(&req->buf));

	/* Check if the end-of-message is reached and if so, switch the message
	 * in HTTP_MSG_DONE state.
	 */
	if (htx_get_tail_type(htx) != HTX_BLK_EOM)
		goto missing_data_or_waiting;

	msg->msg_state = HTTP_MSG_DONE;

  done:
	/* other states, DONE...TUNNEL */
	/* we don't want to forward closes on DONE except in tunnel mode. */
	if ((txn->flags & TX_CON_WANT_MSK) != TX_CON_WANT_TUN)
		channel_dont_close(req);

	htx_end_request(s);
	if (!(req->analysers & an_bit)) {
		htx_end_response(s);
		if (unlikely(msg->msg_state == HTTP_MSG_ERROR)) {
			if (req->flags & CF_SHUTW) {
				/* request errors are most likely due to the
				 * server aborting the transfer. */
				goto aborted_xfer;
			}
			goto return_bad_req;
		}
		return 1;
	}

	/* If "option abortonclose" is set on the backend, we want to monitor
	 * the client's connection and forward any shutdown notification to the
	 * server, which will decide whether to close or to go on processing the
	 * request. We only do that in tunnel mode, and not in other modes since
	 * it can be abused to exhaust source ports. */
	if ((s->be->options & PR_O_ABRT_CLOSE) && !(s->si[0].flags & SI_FL_CLEAN_ABRT)) {
		channel_auto_read(req);
		if ((req->flags & (CF_SHUTR|CF_READ_NULL)) &&
		    ((txn->flags & TX_CON_WANT_MSK) != TX_CON_WANT_TUN))
			s->si[1].flags |= SI_FL_NOLINGER;
		channel_auto_close(req);
	}
	else if (s->txn->meth == HTTP_METH_POST) {
		/* POST requests may require to read extra CRLF sent by broken
		 * browsers and which could cause an RST to be sent upon close
		 * on some systems (eg: Linux). */
		channel_auto_read(req);
	}
	return 0;

 missing_data_or_waiting:
	/* stop waiting for data if the input is closed before the end */
	if (msg->msg_state < HTTP_MSG_DONE && req->flags & CF_SHUTR) {
		if (!(s->flags & SF_ERR_MASK))
			s->flags |= SF_ERR_CLICL;
		if (!(s->flags & SF_FINST_MASK)) {
			if (txn->rsp.msg_state < HTTP_MSG_ERROR)
				s->flags |= SF_FINST_H;
			else
				s->flags |= SF_FINST_D;
		}

		HA_ATOMIC_ADD(&sess->fe->fe_counters.cli_aborts, 1);
		HA_ATOMIC_ADD(&s->be->be_counters.cli_aborts, 1);
		if (objt_server(s->target))
			HA_ATOMIC_ADD(&objt_server(s->target)->counters.cli_aborts, 1);

		goto return_bad_req_stats_ok;
	}

 waiting:
	/* waiting for the last bits to leave the buffer */
	if (req->flags & CF_SHUTW)
		goto aborted_xfer;


	/* When TE: chunked is used, we need to get there again to parse remaining
	 * chunks even if the client has closed, so we don't want to set CF_DONTCLOSE.
	 * And when content-length is used, we never want to let the possible
	 * shutdown be forwarded to the other side, as the state machine will
	 * take care of it once the client responds. It's also important to
	 * prevent TIME_WAITs from accumulating on the backend side, and for
	 * HTTP/2 where the last frame comes with a shutdown.
	 */
	if (msg->flags & HTTP_MSGF_XFER_LEN)
		channel_dont_close(req);

#if 0 // FIXME [Cf]: Probably not required now, but I need more time to think
      // about if

	/* We know that more data are expected, but we couldn't send more that
	 * what we did. So we always set the CF_EXPECT_MORE flag so that the
	 * system knows it must not set a PUSH on this first part. Interactive
	 * modes are already handled by the stream sock layer. We must not do
	 * this in content-length mode because it could present the MSG_MORE
	 * flag with the last block of forwarded data, which would cause an
	 * additional delay to be observed by the receiver.
	 */
	if (msg->flags & HTTP_MSGF_TE_CHNK)
		req->flags |= CF_EXPECT_MORE;
#endif

	return 0;

 return_bad_req: /* let's centralize all bad requests */
	HA_ATOMIC_ADD(&sess->fe->fe_counters.failed_req, 1);
	if (sess->listener->counters)
		HA_ATOMIC_ADD(&sess->listener->counters->failed_req, 1);

 return_bad_req_stats_ok:
	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	if (txn->status > 0) {
		/* Note: we don't send any error if some data were already sent */
		htx_reply_and_close(s, txn->status, NULL);
	} else {
		txn->status = 400;
		htx_reply_and_close(s, txn->status, http_error_message(s));
	}
	req->analysers   &= AN_REQ_FLT_END;
	s->res.analysers &= AN_RES_FLT_END; /* we're in data phase, we want to abort both directions */

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK)) {
		if (txn->rsp.msg_state < HTTP_MSG_ERROR)
			s->flags |= SF_FINST_H;
		else
			s->flags |= SF_FINST_D;
	}
	return 0;

 aborted_xfer:
	txn->req.err_state = txn->req.msg_state;
	txn->req.msg_state = HTTP_MSG_ERROR;
	if (txn->status > 0) {
		/* Note: we don't send any error if some data were already sent */
		htx_reply_and_close(s, txn->status, NULL);
	} else {
		txn->status = 502;
		htx_reply_and_close(s, txn->status, http_error_message(s));
	}
	req->analysers   &= AN_REQ_FLT_END;
	s->res.analysers &= AN_RES_FLT_END; /* we're in data phase, we want to abort both directions */

	HA_ATOMIC_ADD(&sess->fe->fe_counters.srv_aborts, 1);
	HA_ATOMIC_ADD(&s->be->be_counters.srv_aborts, 1);
	if (objt_server(s->target))
		HA_ATOMIC_ADD(&objt_server(s->target)->counters.srv_aborts, 1);

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_SRVCL;
	if (!(s->flags & SF_FINST_MASK)) {
		if (txn->rsp.msg_state < HTTP_MSG_ERROR)
			s->flags |= SF_FINST_H;
		else
			s->flags |= SF_FINST_D;
	}
	return 0;
}

/* This stream analyser waits for a complete HTTP response. It returns 1 if the
 * processing can continue on next analysers, or zero if it either needs more
 * data or wants to immediately abort the response (eg: timeout, error, ...). It
 * is tied to AN_RES_WAIT_HTTP and may may remove itself from s->res.analysers
 * when it has nothing left to do, and may remove any analyser when it wants to
 * abort.
 */
int htx_wait_for_response(struct stream *s, struct channel *rep, int an_bit)
{
	/*
	 * We will analyze a complete HTTP response to check the its syntax.
	 *
	 * Once the start line and all headers are received, we may perform a
	 * capture of the error (if any), and we will set a few fields. We also
	 * logging and finally headers capture.
	 */
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->rsp;
	struct htx *htx;
	union h1_sl sl;
	int n;

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		rep,
		rep->rex, rep->wex,
		rep->flags,
		ci_data(rep),
		rep->analysers);

	htx = htx_from_buf(&rep->buf);

	/*
	 * Now we quickly check if we have found a full valid response.
	 * If not so, we check the FD and buffer states before leaving.
	 * A full response is indicated by the fact that we have seen
	 * the double LF/CRLF, so the state is >= HTTP_MSG_BODY. Invalid
	 * responses are checked first.
	 *
	 * Depending on whether the client is still there or not, we
	 * may send an error response back or not. Note that normally
	 * we should only check for HTTP status there, and check I/O
	 * errors somewhere else.
	 */
	if (unlikely(htx_is_empty(htx) || htx_get_tail_type(htx) < HTX_BLK_EOH)) {
		/* 1: have we encountered a read error ? */
		if (rep->flags & CF_READ_ERROR) {
			if (txn->flags & TX_NOT_FIRST)
				goto abort_keep_alive;

			HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
			if (objt_server(s->target)) {
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_resp, 1);
				health_adjust(objt_server(s->target), HANA_STATUS_HTTP_READ_ERROR);
			}

			rep->analysers &= AN_RES_FLT_END;
			txn->status = 502;

			/* Check to see if the server refused the early data.
			 * If so, just send a 425
			 */
			if (objt_cs(s->si[1].end)) {
				struct connection *conn = objt_cs(s->si[1].end)->conn;

				if (conn->err_code == CO_ER_SSL_EARLY_FAILED)
					txn->status = 425;
			}

			s->si[1].flags |= SI_FL_NOLINGER;
			htx_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_SRVCL;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_H;
			return 0;
		}

		/* 2: read timeout : return a 504 to the client. */
		else if (rep->flags & CF_READ_TIMEOUT) {
			HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
			if (objt_server(s->target)) {
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_resp, 1);
				health_adjust(objt_server(s->target), HANA_STATUS_HTTP_READ_TIMEOUT);
			}

			rep->analysers &= AN_RES_FLT_END;
			txn->status = 504;
			s->si[1].flags |= SI_FL_NOLINGER;
			htx_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_SRVTO;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_H;
			return 0;
		}

		/* 3: client abort with an abortonclose */
		else if ((rep->flags & CF_SHUTR) && ((s->req.flags & (CF_SHUTR|CF_SHUTW)) == (CF_SHUTR|CF_SHUTW))) {
			HA_ATOMIC_ADD(&sess->fe->fe_counters.cli_aborts, 1);
			HA_ATOMIC_ADD(&s->be->be_counters.cli_aborts, 1);
			if (objt_server(s->target))
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.cli_aborts, 1);

			rep->analysers &= AN_RES_FLT_END;
			txn->status = 400;
			htx_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_CLICL;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_H;

			/* process_stream() will take care of the error */
			return 0;
		}

		/* 4: close from server, capture the response if the server has started to respond */
		else if (rep->flags & CF_SHUTR) {
			if (txn->flags & TX_NOT_FIRST)
				goto abort_keep_alive;

			HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
			if (objt_server(s->target)) {
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_resp, 1);
				health_adjust(objt_server(s->target), HANA_STATUS_HTTP_BROKEN_PIPE);
			}

			rep->analysers &= AN_RES_FLT_END;
			txn->status = 502;
			s->si[1].flags |= SI_FL_NOLINGER;
			htx_reply_and_close(s, txn->status, http_error_message(s));

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_SRVCL;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_H;
			return 0;
		}

		/* 5: write error to client (we don't send any message then) */
		else if (rep->flags & CF_WRITE_ERROR) {
			if (txn->flags & TX_NOT_FIRST)
				goto abort_keep_alive;

			HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
			rep->analysers &= AN_RES_FLT_END;

			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_CLICL;
			if (!(s->flags & SF_FINST_MASK))
				s->flags |= SF_FINST_H;

			/* process_stream() will take care of the error */
			return 0;
		}

		channel_dont_close(rep);
		rep->flags |= CF_READ_DONTWAIT; /* try to get back here ASAP */
		return 0;
	}

	/* More interesting part now : we know that we have a complete
	 * response which at least looks like HTTP. We have an indicator
	 * of each header's length, so we can parse them quickly.
	 */

	msg->msg_state = HTTP_MSG_BODY;

	/* 0: we might have to print this header in debug mode */
	if (unlikely((global.mode & MODE_DEBUG) &&
		     (!(global.mode & MODE_QUIET) || (global.mode & MODE_VERBOSE)))) {
		int32_t pos;

		htx_debug_stline("srvrep", s, http_find_stline(htx));

		for (pos = htx_get_head(htx); pos != -1; pos = htx_get_next(htx, pos)) {
			struct htx_blk *blk = htx_get_blk(htx, pos);
			enum htx_blk_type type = htx_get_blk_type(blk);

			if (type == HTX_BLK_EOH)
				break;
			if (type != HTX_BLK_HDR)
				continue;

			htx_debug_hdr("srvhdr", s,
				  htx_get_blk_name(htx, blk),
				  htx_get_blk_value(htx, blk));
		}
	}

	/* 1: get the status code */
	sl = http_find_stline(htx);
	txn->status = sl.st.status;
	if (htx->extra != ULLONG_MAX)
		msg->flags |= HTTP_MSGF_XFER_LEN;

	/* ... and check if the request is HTTP/1.1 or above */
        if ((sl.st.v.len == 8) &&
            ((*(sl.st.v.ptr + 5) > '1') ||
             ((*(sl.st.v.ptr + 5) == '1') && (*(sl.st.v.ptr + 7) >= '1'))))
                msg->flags |= HTTP_MSGF_VER_11;

	n = txn->status / 100;
	if (n < 1 || n > 5)
		n = 0;

	/* when the client triggers a 4xx from the server, it's most often due
	 * to a missing object or permission. These events should be tracked
	 * because if they happen often, it may indicate a brute force or a
	 * vulnerability scan.
	 */
	if (n == 4)
		stream_inc_http_err_ctr(s);

	if (objt_server(s->target))
		HA_ATOMIC_ADD(&objt_server(s->target)->counters.p.http.rsp[n], 1);

	/* Adjust server's health based on status code. Note: status codes 501
	 * and 505 are triggered on demand by client request, so we must not
	 * count them as server failures.
	 */
	if (objt_server(s->target)) {
		if (txn->status >= 100 && (txn->status < 500 || txn->status == 501 || txn->status == 505))
			health_adjust(objt_server(s->target), HANA_STATUS_HTTP_OK);
		else
			health_adjust(objt_server(s->target), HANA_STATUS_HTTP_STS);
	}

	/*
	 * We may be facing a 100-continue response, or any other informational
	 * 1xx response which is non-final, in which case this is not the right
	 * response, and we're waiting for the next one. Let's allow this response
	 * to go to the client and wait for the next one. There's an exception for
	 * 101 which is used later in the code to switch protocols.
	 */
	if (txn->status < 200 &&
	    (txn->status == 100 || txn->status >= 102)) {
		//FLT_STRM_CB(s, flt_htx_reset(s, http, htx));
		c_adv(rep, htx->data);
		msg->msg_state = HTTP_MSG_RPBEFORE;
		txn->status = 0;
		s->logs.t_data = -1; /* was not a response yet */
		return 0;
	}

	/*
	 * 2: check for cacheability.
	 */

	switch (txn->status) {
	case 200:
	case 203:
	case 204:
	case 206:
	case 300:
	case 301:
	case 404:
	case 405:
	case 410:
	case 414:
	case 501:
		break;
	default:
		/* RFC7231#6.1:
		 *   Responses with status codes that are defined as
		 *   cacheable by default (e.g., 200, 203, 204, 206,
		 *   300, 301, 404, 405, 410, 414, and 501 in this
		 *   specification) can be reused by a cache with
		 *   heuristic expiration unless otherwise indicated
		 *   by the method definition or explicit cache
		 *   controls [RFC7234]; all other status codes are
		 *   not cacheable by default.
		 */
		txn->flags &= ~(TX_CACHEABLE | TX_CACHE_COOK);
		break;
	}

	/*
	 * 3: we may need to capture headers
	 */
	s->logs.logwait &= ~LW_RESP;
	if (unlikely((s->logs.logwait & LW_RSPHDR) && s->res_cap))
		htx_capture_headers(htx, s->res_cap, sess->fe->rsp_cap);

	/* Skip parsing if no content length is possible. */
	if (unlikely((txn->meth == HTTP_METH_CONNECT && txn->status == 200) ||
		     txn->status == 101)) {
		/* Either we've established an explicit tunnel, or we're
		 * switching the protocol. In both cases, we're very unlikely
		 * to understand the next protocols. We have to switch to tunnel
		 * mode, so that we transfer the request and responses then let
		 * this protocol pass unmodified. When we later implement specific
		 * parsers for such protocols, we'll want to check the Upgrade
		 * header which contains information about that protocol for
		 * responses with status 101 (eg: see RFC2817 about TLS).
		 */
		txn->flags = (txn->flags & ~TX_CON_WANT_MSK) | TX_CON_WANT_TUN;
	}

	/* we want to have the response time before we start processing it */
	s->logs.t_data = tv_ms_elapsed(&s->logs.tv_accept, &now);

	/* end of job, return OK */
	rep->analysers &= ~an_bit;
	rep->analyse_exp = TICK_ETERNITY;
	channel_auto_close(rep);
	return 1;

 abort_keep_alive:
	/* A keep-alive request to the server failed on a network error.
	 * The client is required to retry. We need to close without returning
	 * any other information so that the client retries.
	 */
	txn->status = 0;
	rep->analysers   &= AN_RES_FLT_END;
	s->req.analysers &= AN_REQ_FLT_END;
	s->logs.logwait = 0;
	s->logs.level = 0;
	s->res.flags &= ~CF_EXPECT_MORE; /* speed up sending a previous response */
	htx_reply_and_close(s, txn->status, NULL);
	return 0;
}

/* This function performs all the processing enabled for the current response.
 * It normally returns 1 unless it wants to break. It relies on buffers flags,
 * and updates s->res.analysers. It might make sense to explode it into several
 * other functions. It works like process_request (see indications above).
 */
int htx_process_res_common(struct stream *s, struct channel *rep, int an_bit, struct proxy *px)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &txn->rsp;
	struct proxy *cur_proxy;
	struct cond_wordlist *wl;
	enum rule_result ret = HTTP_RULE_RES_CONT;

	// TODO: Disabled for now
	rep->analysers &= ~AN_RES_FLT_XFER_DATA;
	rep->analysers |= AN_RES_HTTP_XFER_BODY;
	rep->analyse_exp = TICK_ETERNITY;
	rep->analysers &= ~an_bit;
	return 1;

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		rep,
		rep->rex, rep->wex,
		rep->flags,
		ci_data(rep),
		rep->analysers);

	if (unlikely(msg->msg_state < HTTP_MSG_BODY))	/* we need more data */
		return 0;

	/* The stats applet needs to adjust the Connection header but we don't
	 * apply any filter there.
	 */
	if (unlikely(objt_applet(s->target) == &http_stats_applet)) {
		rep->analysers &= ~an_bit;
		rep->analyse_exp = TICK_ETERNITY;
		goto end;
	}

	/*
	 * We will have to evaluate the filters.
	 * As opposed to version 1.2, now they will be evaluated in the
	 * filters order and not in the header order. This means that
	 * each filter has to be validated among all headers.
	 *
	 * Filters are tried with ->be first, then with ->fe if it is
	 * different from ->be.
	 *
	 * Maybe we are in resume condiion. In this case I choose the
	 * "struct proxy" which contains the rule list matching the resume
	 * pointer. If none of theses "struct proxy" match, I initialise
	 * the process with the first one.
	 *
	 * In fact, I check only correspondance betwwen the current list
	 * pointer and the ->fe rule list. If it doesn't match, I initialize
	 * the loop with the ->be.
	 */
	if (s->current_rule_list == &sess->fe->http_res_rules)
		cur_proxy = sess->fe;
	else
		cur_proxy = s->be;
	while (1) {
		struct proxy *rule_set = cur_proxy;

		/* evaluate http-response rules */
		if (ret == HTTP_RULE_RES_CONT) {
			ret = http_res_get_intercept_rule(cur_proxy, &cur_proxy->http_res_rules, s);

			if (ret == HTTP_RULE_RES_BADREQ)
				goto return_srv_prx_502;

			if (ret == HTTP_RULE_RES_DONE) {
				rep->analysers &= ~an_bit;
				rep->analyse_exp = TICK_ETERNITY;
				return 1;
			}
		}

		/* we need to be called again. */
		if (ret == HTTP_RULE_RES_YIELD) {
			channel_dont_close(rep);
			return 0;
		}

		/* try headers filters */
		if (rule_set->rsp_exp != NULL) {
			if (apply_filters_to_response(s, rep, rule_set) < 0) {
			return_bad_resp:
				if (objt_server(s->target)) {
					HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_resp, 1);
					health_adjust(objt_server(s->target), HANA_STATUS_HTTP_RSP);
				}
				HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
			return_srv_prx_502:
				rep->analysers &= AN_RES_FLT_END;
				txn->status = 502;
				s->logs.t_data = -1; /* was not a valid response */
				s->si[1].flags |= SI_FL_NOLINGER;
				channel_truncate(rep);
				http_reply_and_close(s, txn->status, http_error_message(s));
				if (!(s->flags & SF_ERR_MASK))
					s->flags |= SF_ERR_PRXCOND;
				if (!(s->flags & SF_FINST_MASK))
					s->flags |= SF_FINST_H;
				return 0;
			}
		}

		/* has the response been denied ? */
		if (txn->flags & TX_SVDENY) {
			if (objt_server(s->target))
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_secu, 1);

			HA_ATOMIC_ADD(&s->be->be_counters.denied_resp, 1);
			HA_ATOMIC_ADD(&sess->fe->fe_counters.denied_resp, 1);
			if (sess->listener->counters)
				HA_ATOMIC_ADD(&sess->listener->counters->denied_resp, 1);

			goto return_srv_prx_502;
		}

		/* add response headers from the rule sets in the same order */
		list_for_each_entry(wl, &rule_set->rsp_add, list) {
			if (txn->status < 200 && txn->status != 101)
				break;
			if (wl->cond) {
				int ret = acl_exec_cond(wl->cond, px, sess, s, SMP_OPT_DIR_RES|SMP_OPT_FINAL);
				ret = acl_pass(ret);
				if (((struct acl_cond *)wl->cond)->pol == ACL_COND_UNLESS)
					ret = !ret;
				if (!ret)
					continue;
			}
			if (unlikely(http_header_add_tail2(&txn->rsp, &txn->hdr_idx, wl->s, strlen(wl->s)) < 0))
				goto return_bad_resp;
		}

		/* check whether we're already working on the frontend */
		if (cur_proxy == sess->fe)
			break;
		cur_proxy = sess->fe;
	}

	/* After this point, this anayzer can't return yield, so we can
	 * remove the bit corresponding to this analyzer from the list.
	 *
	 * Note that the intermediate returns and goto found previously
	 * reset the analyzers.
	 */
	rep->analysers &= ~an_bit;
	rep->analyse_exp = TICK_ETERNITY;

	/* OK that's all we can do for 1xx responses */
	if (unlikely(txn->status < 200 && txn->status != 101))
		goto end;

	/*
	 * Now check for a server cookie.
	 */
	if (s->be->cookie_name || sess->fe->capture_name || (s->be->options & PR_O_CHK_CACHE))
		manage_server_side_cookies(s, rep);

	/*
	 * Check for cache-control or pragma headers if required.
	 */
	if ((s->be->options & PR_O_CHK_CACHE) || (s->be->ck_opts & PR_CK_NOC))
		check_response_for_cacheability(s, rep);

	/*
	 * Add server cookie in the response if needed
	 */
	if (objt_server(s->target) && (s->be->ck_opts & PR_CK_INS) &&
	    !((txn->flags & TX_SCK_FOUND) && (s->be->ck_opts & PR_CK_PSV)) &&
	    (!(s->flags & SF_DIRECT) ||
	     ((s->be->cookie_maxidle || txn->cookie_last_date) &&
	      (!txn->cookie_last_date || (txn->cookie_last_date - date.tv_sec) < 0)) ||
	     (s->be->cookie_maxlife && !txn->cookie_first_date) ||  // set the first_date
	     (!s->be->cookie_maxlife && txn->cookie_first_date)) && // remove the first_date
	    (!(s->be->ck_opts & PR_CK_POST) || (txn->meth == HTTP_METH_POST)) &&
	    !(s->flags & SF_IGNORE_PRST)) {
		/* the server is known, it's not the one the client requested, or the
		 * cookie's last seen date needs to be refreshed. We have to
		 * insert a set-cookie here, except if we want to insert only on POST
		 * requests and this one isn't. Note that servers which don't have cookies
		 * (eg: some backup servers) will return a full cookie removal request.
		 */
		if (!objt_server(s->target)->cookie) {
			chunk_printf(&trash,
				     "Set-Cookie: %s=; Expires=Thu, 01-Jan-1970 00:00:01 GMT; path=/",
				     s->be->cookie_name);
		}
		else {
			chunk_printf(&trash, "Set-Cookie: %s=%s", s->be->cookie_name, objt_server(s->target)->cookie);

			if (s->be->cookie_maxidle || s->be->cookie_maxlife) {
				/* emit last_date, which is mandatory */
				trash.area[trash.data++] = COOKIE_DELIM_DATE;
				s30tob64((date.tv_sec+3) >> 2,
					 trash.area + trash.data);
				trash.data += 5;

				if (s->be->cookie_maxlife) {
					/* emit first_date, which is either the original one or
					 * the current date.
					 */
					trash.area[trash.data++] = COOKIE_DELIM_DATE;
					s30tob64(txn->cookie_first_date ?
						 txn->cookie_first_date >> 2 :
						 (date.tv_sec+3) >> 2,
						 trash.area + trash.data);
					trash.data += 5;
				}
			}
			chunk_appendf(&trash, "; path=/");
		}

		if (s->be->cookie_domain)
			chunk_appendf(&trash, "; domain=%s", s->be->cookie_domain);

		if (s->be->ck_opts & PR_CK_HTTPONLY)
			chunk_appendf(&trash, "; HttpOnly");

		if (s->be->ck_opts & PR_CK_SECURE)
			chunk_appendf(&trash, "; Secure");

		if (unlikely(http_header_add_tail2(&txn->rsp, &txn->hdr_idx, trash.area, trash.data) < 0))
			goto return_bad_resp;

		txn->flags &= ~TX_SCK_MASK;
		if (__objt_server(s->target)->cookie && (s->flags & SF_DIRECT))
			/* the server did not change, only the date was updated */
			txn->flags |= TX_SCK_UPDATED;
		else
			txn->flags |= TX_SCK_INSERTED;

		/* Here, we will tell an eventual cache on the client side that we don't
		 * want it to cache this reply because HTTP/1.0 caches also cache cookies !
		 * Some caches understand the correct form: 'no-cache="set-cookie"', but
		 * others don't (eg: apache <= 1.3.26). So we use 'private' instead.
		 */
		if ((s->be->ck_opts & PR_CK_NOC) && (txn->flags & TX_CACHEABLE)) {

			txn->flags &= ~TX_CACHEABLE & ~TX_CACHE_COOK;

			if (unlikely(http_header_add_tail2(&txn->rsp, &txn->hdr_idx,
			                                   "Cache-control: private", 22) < 0))
				goto return_bad_resp;
		}
	}

	/*
	 * Check if result will be cacheable with a cookie.
	 * We'll block the response if security checks have caught
	 * nasty things such as a cacheable cookie.
	 */
	if (((txn->flags & (TX_CACHEABLE | TX_CACHE_COOK | TX_SCK_PRESENT)) ==
	     (TX_CACHEABLE | TX_CACHE_COOK | TX_SCK_PRESENT)) &&
	    (s->be->options & PR_O_CHK_CACHE)) {
		/* we're in presence of a cacheable response containing
		 * a set-cookie header. We'll block it as requested by
		 * the 'checkcache' option, and send an alert.
		 */
		if (objt_server(s->target))
			HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_secu, 1);

		HA_ATOMIC_ADD(&s->be->be_counters.denied_resp, 1);
		HA_ATOMIC_ADD(&sess->fe->fe_counters.denied_resp, 1);
		if (sess->listener->counters)
			HA_ATOMIC_ADD(&sess->listener->counters->denied_resp, 1);

		ha_alert("Blocking cacheable cookie in response from instance %s, server %s.\n",
			 s->be->id, objt_server(s->target) ? objt_server(s->target)->id : "<dispatch>");
		send_log(s->be, LOG_ALERT,
			 "Blocking cacheable cookie in response from instance %s, server %s.\n",
			 s->be->id, objt_server(s->target) ? objt_server(s->target)->id : "<dispatch>");
		goto return_srv_prx_502;
	}

 end:
	/* Always enter in the body analyzer */
	rep->analysers &= ~AN_RES_FLT_XFER_DATA;
	rep->analysers |= AN_RES_HTTP_XFER_BODY;

	/* if the user wants to log as soon as possible, without counting
	 * bytes from the server, then this is the right moment. We have
	 * to temporarily assign bytes_out to log what we currently have.
	 */
	if (!LIST_ISEMPTY(&sess->fe->logformat) && !(s->logs.logwait & LW_BYTES)) {
		s->logs.t_close = s->logs.t_data; /* to get a valid end date */
		s->logs.bytes_out = txn->rsp.eoh;
		s->do_log(s);
		s->logs.bytes_out = 0;
	}
	return 1;
}

/* This function is an analyser which forwards response body (including chunk
 * sizes if any). It is called as soon as we must forward, even if we forward
 * zero byte. The only situation where it must not be called is when we're in
 * tunnel mode and we want to forward till the close. It's used both to forward
 * remaining data and to resync after end of body. It expects the msg_state to
 * be between MSG_BODY and MSG_DONE (inclusive). It returns zero if it needs to
 * read more data, or 1 once we can go on with next request or end the stream.
 *
 * It is capable of compressing response data both in content-length mode and
 * in chunked mode. The state machines follows different flows depending on
 * whether content-length and chunked modes are used, since there are no
 * trailers in content-length :
 *
 *       chk-mode        cl-mode
 *          ,----- BODY -----.
 *         /                  \
 *        V     size > 0       V    chk-mode
 *  .--> SIZE -------------> DATA -------------> CRLF
 *  |     | size == 0          | last byte         |
 *  |     v      final crlf    v inspected         |
 *  |  TRAILERS -----------> DONE                  |
 *  |                                              |
 *  `----------------------------------------------'
 *
 * Compression only happens in the DATA state, and must be flushed in final
 * states (TRAILERS/DONE) or when leaving on missing data. Normal forwarding
 * is performed at once on final states for all bytes parsed, or when leaving
 * on missing data.
 */
int htx_response_forward_body(struct stream *s, struct channel *res, int an_bit)
{
	struct session *sess = s->sess;
	struct http_txn *txn = s->txn;
	struct http_msg *msg = &s->txn->rsp;
	struct htx *htx;
	//int ret;

	DPRINTF(stderr,"[%u] %s: stream=%p b=%p, exp(r,w)=%u,%u bf=%08x bh=%lu analysers=%02x\n",
		now_ms, __FUNCTION__,
		s,
		res,
		res->rex, res->wex,
		res->flags,
		ci_data(res),
		res->analysers);

	htx = htx_from_buf(&res->buf);

	if ((res->flags & (CF_READ_ERROR|CF_READ_TIMEOUT|CF_WRITE_ERROR|CF_WRITE_TIMEOUT)) ||
	    ((res->flags & CF_SHUTW) && (res->to_forward || co_data(res)))) {
		/* Output closed while we were sending data. We must abort and
		 * wake the other side up.
		 */
		msg->err_state = msg->msg_state;
		msg->msg_state = HTTP_MSG_ERROR;
		htx_end_response(s);
		htx_end_request(s);
		return 1;
	}

	if (msg->msg_state == HTTP_MSG_BODY)
		msg->msg_state = HTTP_MSG_DATA;

	/* in most states, we should abort in case of early close */
	channel_auto_close(res);

	if (res->to_forward) {
                /* We can't process the buffer's contents yet */
		res->flags |= CF_WAKE_WRITE;
		goto missing_data_or_waiting;
	}

	if (msg->msg_state >= HTTP_MSG_DONE)
		goto done;

	/* Forward all input data. We get it by removing all outgoing data not
	 * forwarded yet from HTX data size.
	 */
	c_adv(res, htx->data - co_data(res));

	/* To let the function channel_forward work as expected we must update
	 * the channel's buffer to pretend there is no more input data. The
	 * right length is then restored. We must do that, because when an HTX
	 * message is stored into a buffer, it appears as full.
	 */
	b_set_data(&res->buf, co_data(res));
	if (htx->extra != ULLONG_MAX)
		htx->extra -= channel_forward(res, htx->extra);
	b_set_data(&res->buf, b_size(&res->buf));

	if (!(msg->flags & HTTP_MSGF_XFER_LEN)) {
		/* The server still sending data that should be filtered */
		if (res->flags & CF_SHUTR || !HAS_DATA_FILTERS(s, res)) {
			msg->msg_state = HTTP_MSG_TUNNEL;
			goto done;
		}
	}

	/* Check if the end-of-message is reached and if so, switch the message
	 * in HTTP_MSG_DONE state.
	 */
	if (htx_get_tail_type(htx) != HTX_BLK_EOM)
		goto missing_data_or_waiting;

	msg->msg_state = HTTP_MSG_DONE;

  done:
	/* other states, DONE...TUNNEL */
	channel_dont_close(res);

	htx_end_response(s);
	if (!(res->analysers & an_bit)) {
		htx_end_request(s);
		if (unlikely(msg->msg_state == HTTP_MSG_ERROR)) {
			if (res->flags & CF_SHUTW) {
				/* response errors are most likely due to the
				 * client aborting the transfer. */
				goto aborted_xfer;
			}
			goto return_bad_res;
		}
		return 1;
	}
	return 0;

  missing_data_or_waiting:
	if (res->flags & CF_SHUTW)
		goto aborted_xfer;

	/* stop waiting for data if the input is closed before the end. If the
	 * client side was already closed, it means that the client has aborted,
	 * so we don't want to count this as a server abort. Otherwise it's a
	 * server abort.
	 */
	if (msg->msg_state < HTTP_MSG_DONE && res->flags & CF_SHUTR) {
		if ((s->req.flags & (CF_SHUTR|CF_SHUTW)) == (CF_SHUTR|CF_SHUTW))
			goto aborted_xfer;
		/* If we have some pending data, we continue the processing */
		if (htx_is_empty(htx)) {
			if (!(s->flags & SF_ERR_MASK))
				s->flags |= SF_ERR_SRVCL;
			HA_ATOMIC_ADD(&s->be->be_counters.srv_aborts, 1);
			if (objt_server(s->target))
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.srv_aborts, 1);
			goto return_bad_res_stats_ok;
		}
	}

	/* When TE: chunked is used, we need to get there again to parse
	 * remaining chunks even if the server has closed, so we don't want to
	 * set CF_DONTCLOSE. Similarly when there is a content-leng or if there
	 * are filters registered on the stream, we don't want to forward a
	 * close
	 */
	if ((msg->flags & HTTP_MSGF_XFER_LEN) || HAS_DATA_FILTERS(s, res))
		channel_dont_close(res);

#if 0 // FIXME [Cf]: Probably not required now, but I need more time to think
      // about if

	/* We know that more data are expected, but we couldn't send more that
	 * what we did. So we always set the CF_EXPECT_MORE flag so that the
	 * system knows it must not set a PUSH on this first part. Interactive
	 * modes are already handled by the stream sock layer. We must not do
	 * this in content-length mode because it could present the MSG_MORE
	 * flag with the last block of forwarded data, which would cause an
	 * additional delay to be observed by the receiver.
	 */
	if ((msg->flags & HTTP_MSGF_TE_CHNK) || (msg->flags & HTTP_MSGF_COMPRESSING))
		res->flags |= CF_EXPECT_MORE;
#endif

	/* the stream handler will take care of timeouts and errors */
	return 0;

 return_bad_res: /* let's centralize all bad responses */
	HA_ATOMIC_ADD(&s->be->be_counters.failed_resp, 1);
	if (objt_server(s->target))
		HA_ATOMIC_ADD(&objt_server(s->target)->counters.failed_resp, 1);

 return_bad_res_stats_ok:
	txn->rsp.err_state = txn->rsp.msg_state;
	txn->rsp.msg_state = HTTP_MSG_ERROR;
	/* don't send any error message as we're in the body */
	htx_reply_and_close(s, txn->status, NULL);
	res->analysers   &= AN_RES_FLT_END;
	s->req.analysers &= AN_REQ_FLT_END; /* we're in data phase, we want to abort both directions */
	if (objt_server(s->target))
		health_adjust(objt_server(s->target), HANA_STATUS_HTTP_HDRRSP);

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_PRXCOND;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_D;
	return 0;

 aborted_xfer:
	txn->rsp.err_state = txn->rsp.msg_state;
	txn->rsp.msg_state = HTTP_MSG_ERROR;
	/* don't send any error message as we're in the body */
	htx_reply_and_close(s, txn->status, NULL);
	res->analysers   &= AN_RES_FLT_END;
	s->req.analysers &= AN_REQ_FLT_END; /* we're in data phase, we want to abort both directions */

	HA_ATOMIC_ADD(&sess->fe->fe_counters.cli_aborts, 1);
	HA_ATOMIC_ADD(&s->be->be_counters.cli_aborts, 1);
	if (objt_server(s->target))
		HA_ATOMIC_ADD(&objt_server(s->target)->counters.cli_aborts, 1);

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_CLICL;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_D;
	return 0;
}

void htx_adjust_conn_mode(struct stream *s, struct http_txn *txn)
{
	struct proxy *fe = strm_fe(s);
	int tmp = TX_CON_WANT_CLO;

	if ((fe->options & PR_O_HTTP_MODE) == PR_O_HTTP_TUN)
		tmp = TX_CON_WANT_TUN;

	if ((txn->flags & TX_CON_WANT_MSK) < tmp)
		txn->flags = (txn->flags & ~TX_CON_WANT_MSK) | tmp;
}

/* Perform an HTTP redirect based on the information in <rule>. The function
 * returns non-zero on success, or zero in case of a, irrecoverable error such
 * as too large a request to build a valid response.
 */
int htx_apply_redirect_rule(struct redirect_rule *rule, struct stream *s, struct http_txn *txn)
{
	struct htx *htx = htx_from_buf(&s->req.buf);
	union h1_sl sl;
	const char *msg_fmt;
	struct buffer *chunk;
	int ret = 0;

	chunk = alloc_trash_chunk();
	if (!chunk)
		goto leave;

	/* build redirect message */
	switch(rule->code) {
	case 308:
		msg_fmt = HTTP_308;
		break;
	case 307:
		msg_fmt = HTTP_307;
		break;
	case 303:
		msg_fmt = HTTP_303;
		break;
	case 301:
		msg_fmt = HTTP_301;
		break;
	case 302:
	default:
		msg_fmt = HTTP_302;
		break;
	}

	if (unlikely(!chunk_strcpy(chunk, msg_fmt)))
		goto leave;

	switch(rule->type) {
	case REDIRECT_TYPE_SCHEME: {
		struct http_hdr_ctx ctx;
		struct ist path, host;

		host = ist("");
		ctx.blk = NULL;
		if (http_find_header(htx, ist("Host"), &ctx, 0))
			host = ctx.value;

		sl = http_find_stline(htx);
		path = http_get_path(sl.rq.u);
		/* build message using path */
		if (path.ptr) {
			if (rule->flags & REDIRECT_FLAG_DROP_QS) {
				int qs = 0;
				while (qs < path.len) {
					if (*(path.ptr + qs) == '?') {
						path.len = qs;
						break;
					}
					qs++;
				}
			}
		}
		else
			path = ist("/");

		if (rule->rdr_str) { /* this is an old "redirect" rule */
			/* add scheme */
			if (!chunk_memcat(chunk, rule->rdr_str, rule->rdr_len))
				goto leave;
		}
		else {
			/* add scheme with executing log format */
			chunk->data += build_logline(s, chunk->area + chunk->data,
						     chunk->size - chunk->data,
						     &rule->rdr_fmt);
		}
		/* add "://" + host + path */
		if (!chunk_memcat(chunk, "://", 3) ||
		    !chunk_memcat(chunk, host.ptr, host.len) ||
		    !chunk_memcat(chunk, path.ptr, path.len))
			goto leave;

		/* append a slash at the end of the location if needed and missing */
		if (chunk->data && chunk->area[chunk->data - 1] != '/' &&
		    (rule->flags & REDIRECT_FLAG_APPEND_SLASH)) {
			if (chunk->data + 1 >= chunk->size)
				goto leave;
			chunk->area[chunk->data++] = '/';
		}
		break;
	}
	case REDIRECT_TYPE_PREFIX: {
		struct ist path;

		sl = http_find_stline(htx);
		path = http_get_path(sl.rq.u);
		/* build message using path */
		if (path.ptr) {
			if (rule->flags & REDIRECT_FLAG_DROP_QS) {
				int qs = 0;
				while (qs < path.len) {
					if (*(path.ptr + qs) == '?') {
						path.len = qs;
						break;
					}
					qs++;
				}
			}
		}
		else
			path = ist("/");

		if (rule->rdr_str) { /* this is an old "redirect" rule */
			/* add prefix. Note that if prefix == "/", we don't want to
			 * add anything, otherwise it makes it hard for the user to
			 * configure a self-redirection.
			 */
			if (rule->rdr_len != 1 || *rule->rdr_str != '/') {
				if (!chunk_memcat(chunk, rule->rdr_str, rule->rdr_len))
					goto leave;
			}
		}
		else {
			/* add prefix with executing log format */
			chunk->data += build_logline(s, chunk->area + chunk->data,
						     chunk->size - chunk->data,
						     &rule->rdr_fmt);
		}

		/* add path */
		if (!chunk_memcat(chunk, path.ptr, path.len))
			goto leave;

		/* append a slash at the end of the location if needed and missing */
		if (chunk->data && chunk->area[chunk->data - 1] != '/' &&
		    (rule->flags & REDIRECT_FLAG_APPEND_SLASH)) {
			if (chunk->data + 1 >= chunk->size)
				goto leave;
			chunk->area[chunk->data++] = '/';
		}
		break;
	}
	case REDIRECT_TYPE_LOCATION:
	default:
		if (rule->rdr_str) { /* this is an old "redirect" rule */
			/* add location */
			if (!chunk_memcat(chunk, rule->rdr_str, rule->rdr_len))
				goto leave;
		}
		else {
			/* add location with executing log format */
			chunk->data += build_logline(s, chunk->area + chunk->data,
						     chunk->size - chunk->data,
						     &rule->rdr_fmt);
		}
		break;
	}

	if (rule->cookie_len) {
		if (!chunk_memcat(chunk, "\r\nSet-Cookie: ", 14) ||
		    !chunk_memcat(chunk, rule->cookie_str, rule->cookie_len))
			goto leave;
	}

	/* add end of headers and the keep-alive/close status. */
	txn->status = rule->code;
	/* let's log the request time */
	s->logs.tv_request = now;

	/* FIXME: close for now, but it could be cool to handle the keep-alive here */
	if (unlikely(txn->flags & TX_USE_PX_CONN)) {
		if (!chunk_memcat(chunk, "\r\nProxy-Connection: close\r\n\r\n", 29))
			goto leave;
	} else {
		if (!chunk_memcat(chunk, "\r\nConnection: close\r\n\r\n", 23))
			goto leave;
	}
	htx_reply_and_close(s, txn->status, chunk);
	s->req.analysers &= AN_REQ_FLT_END;

	if (!(s->flags & SF_ERR_MASK))
		s->flags |= SF_ERR_LOCAL;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= SF_FINST_R;

	ret = 1;
  leave:
	free_trash_chunk(chunk);
	return ret;
}

int htx_transform_header_str(struct stream* s, struct channel *chn, struct htx *htx,
			     struct ist name, const char *str, struct my_regex *re, int action)
{
	struct http_hdr_ctx ctx;
	struct buffer *output = get_trash_chunk();

	/* find full header is action is ACT_HTTP_REPLACE_HDR */
	ctx.blk = NULL;
	while (http_find_header(htx, name, &ctx, (action == ACT_HTTP_REPLACE_HDR))) {
		if (!regex_exec_match2(re, ctx.value.ptr, ctx.value.len, MAX_MATCH, pmatch, 0))
			continue;

		output->data = exp_replace(output->area, output->size, ctx.value.ptr, str, pmatch);
		if (output->data == -1)
			return -1;
		if (!http_replace_header_value(htx, &ctx, ist2(output->area, output->data)))
			return -1;
	}
	return 0;
}

static int htx_transform_header(struct stream* s, struct channel *chn, struct htx *htx,
				const struct ist name, struct list *fmt, struct my_regex *re, int action)
{
	struct buffer *replace;
	int ret = -1;

	replace = alloc_trash_chunk();
	if (!replace)
		goto leave;

	replace->data = build_logline(s, replace->area, replace->size, fmt);
	if (replace->data >= replace->size - 1)
		goto leave;

	ret = htx_transform_header_str(s, chn, htx, name, replace->area, re, action);

  leave:
	free_trash_chunk(replace);
	return ret;
}

/* This function executes one of the set-{method,path,query,uri} actions. It
 * takes the string from the variable 'replace' with length 'len', then modifies
 * the relevant part of the request line accordingly. Then it updates various
 * pointers to the next elements which were moved, and the total buffer length.
 * It finds the action to be performed in p[2], previously filled by function
 * parse_set_req_line(). It returns 0 in case of success, -1 in case of internal
 * error, though this can be revisited when this code is finally exploited.
 *
 * 'action' can be '0' to replace method, '1' to replace path, '2' to replace
 * query string and 3 to replace uri.
 *
 * In query string case, the mark question '?' must be set at the start of the
 * string by the caller, event if the replacement query string is empty.
 */
int htx_req_replace_stline(int action, const char *replace, int len,
			   struct proxy *px, struct stream *s)
{
	struct htx *htx = htx_from_buf(&s->req.buf);

	switch (action) {
		case 0: // method
			if (!http_replace_req_meth(htx, ist2(replace, len)))
				return -1;
			break;

		case 1: // path
			if (!http_replace_req_path(htx, ist2(replace, len)))
				return -1;
			break;

		case 2: // query
			if (!http_replace_req_query(htx, ist2(replace, len)))
				return -1;
			break;

		case 3: // uri
			if (!http_replace_req_uri(htx, ist2(replace, len)))
				return -1;
			break;

		default:
			return -1;
	}
	return 0;
}

/* This function replace the HTTP status code and the associated message. The
 * variable <status> contains the new status code. This function never fails.
 */
void htx_res_set_status(unsigned int status, const char *reason, struct stream *s)
{
	struct htx *htx = htx_from_buf(&s->res.buf);
	char *res;

	chunk_reset(&trash);
	res = ultoa_o(status, trash.area, trash.size);
	trash.data = res - trash.area;

	/* Do we have a custom reason format string? */
	if (reason == NULL)
		reason = http_get_reason(status);

	if (!http_replace_res_status(htx, ist2(trash.area, trash.data)))
		http_replace_res_reason(htx, ist2(reason, strlen(reason)));
}

/* This function terminates the request because it was completly analyzed or
 * because an error was triggered during the body forwarding.
 */
static void htx_end_request(struct stream *s)
{
	struct channel *chn = &s->req;
	struct http_txn *txn = s->txn;

	DPRINTF(stderr,"[%u] %s: stream=%p states=%s,%s req->analysers=0x%08x res->analysers=0x%08x\n",
		now_ms, __FUNCTION__, s,
		h1_msg_state_str(txn->req.msg_state), h1_msg_state_str(txn->rsp.msg_state),
		s->req.analysers, s->res.analysers);

	if (unlikely(txn->req.msg_state == HTTP_MSG_ERROR)) {
		channel_abort(chn);
		channel_truncate(chn);
		goto end;
	}

	if (unlikely(txn->req.msg_state < HTTP_MSG_DONE))
		return;

	if (txn->req.msg_state == HTTP_MSG_DONE) {
		if (txn->rsp.msg_state < HTTP_MSG_DONE) {
			/* The server has not finished to respond, so we
			 * don't want to move in order not to upset it.
			 */
			return;
		}

		/* No need to read anymore, the request was completely parsed.
		 * We can shut the read side unless we want to abort_on_close,
		 * or we have a POST request. The issue with POST requests is
		 * that some browsers still send a CRLF after the request, and
		 * this CRLF must be read so that it does not remain in the kernel
		 * buffers, otherwise a close could cause an RST on some systems
		 * (eg: Linux).
		 */
		if ((!(s->be->options & PR_O_ABRT_CLOSE) || (s->si[0].flags & SI_FL_CLEAN_ABRT)) &&
		    txn->meth != HTTP_METH_POST)
			channel_dont_read(chn);

		/* if the server closes the connection, we want to immediately react
		 * and close the socket to save packets and syscalls.
		 */
		s->si[1].flags |= SI_FL_NOHALF;

		/* In any case we've finished parsing the request so we must
		 * disable Nagle when sending data because 1) we're not going
		 * to shut this side, and 2) the server is waiting for us to
		 * send pending data.
		 */
		chn->flags |= CF_NEVER_WAIT;

		/* When we get here, it means that both the request and the
		 * response have finished receiving. Depending on the connection
		 * mode, we'll have to wait for the last bytes to leave in either
		 * direction, and sometimes for a close to be effective.
		 */
		if ((txn->flags & TX_CON_WANT_MSK) == TX_CON_WANT_TUN) {
			/* Tunnel mode will not have any analyser so it needs to
			 * poll for reads.
			 */
			channel_auto_read(chn);
			if (b_data(&chn->buf))
				return;
			txn->req.msg_state = HTTP_MSG_TUNNEL;
		}
		else {
			/* we're not expecting any new data to come for this
			 * transaction, so we can close it.
			 *
			 *  However, there is an exception if the response
			 *  length is undefined. In this case, we need to wait
			 *  the close from the server. The response will be
			 *  switched in TUNNEL mode until the end.
			 */
			if (!(txn->rsp.flags & HTTP_MSGF_XFER_LEN) &&
			    txn->rsp.msg_state != HTTP_MSG_CLOSED)
				goto check_channel_flags;

			if (!(chn->flags & (CF_SHUTW|CF_SHUTW_NOW))) {
				channel_shutr_now(chn);
				channel_shutw_now(chn);
			}
		}
		goto check_channel_flags;
	}

	if (txn->req.msg_state == HTTP_MSG_CLOSING) {
	  http_msg_closing:
		/* nothing else to forward, just waiting for the output buffer
		 * to be empty and for the shutw_now to take effect.
		 */
		if (channel_is_empty(chn)) {
			txn->req.msg_state = HTTP_MSG_CLOSED;
			goto http_msg_closed;
		}
		else if (chn->flags & CF_SHUTW) {
			txn->req.err_state = txn->req.msg_state;
			txn->req.msg_state = HTTP_MSG_ERROR;
			goto end;
		}
		return;
	}

	if (txn->req.msg_state == HTTP_MSG_CLOSED) {
	  http_msg_closed:
		/* if we don't know whether the server will close, we need to hard close */
		if (txn->rsp.flags & HTTP_MSGF_XFER_LEN)
			s->si[1].flags |= SI_FL_NOLINGER;  /* we want to close ASAP */
		/* see above in MSG_DONE why we only do this in these states */
		if ((!(s->be->options & PR_O_ABRT_CLOSE) || (s->si[0].flags & SI_FL_CLEAN_ABRT)))
			channel_dont_read(chn);
		goto end;
	}

  check_channel_flags:
	/* Here, we are in HTTP_MSG_DONE or HTTP_MSG_TUNNEL */
	if (chn->flags & (CF_SHUTW|CF_SHUTW_NOW)) {
		/* if we've just closed an output, let's switch */
		txn->req.msg_state = HTTP_MSG_CLOSING;
		goto http_msg_closing;
	}

  end:
	chn->analysers &= AN_REQ_FLT_END;
	if (txn->req.msg_state == HTTP_MSG_TUNNEL && HAS_REQ_DATA_FILTERS(s))
			chn->analysers |= AN_REQ_FLT_XFER_DATA;
	channel_auto_close(chn);
	channel_auto_read(chn);
}


/* This function terminates the response because it was completly analyzed or
 * because an error was triggered during the body forwarding.
 */
static void htx_end_response(struct stream *s)
{
	struct channel *chn = &s->res;
	struct http_txn *txn = s->txn;

	DPRINTF(stderr,"[%u] %s: stream=%p states=%s,%s req->analysers=0x%08x res->analysers=0x%08x\n",
		now_ms, __FUNCTION__, s,
		h1_msg_state_str(txn->req.msg_state), h1_msg_state_str(txn->rsp.msg_state),
		s->req.analysers, s->res.analysers);

	if (unlikely(txn->rsp.msg_state == HTTP_MSG_ERROR)) {
		channel_truncate(chn);
		channel_abort(&s->req);
		goto end;
	}

	if (unlikely(txn->rsp.msg_state < HTTP_MSG_DONE))
		return;

	if (txn->rsp.msg_state == HTTP_MSG_DONE) {
		/* In theory, we don't need to read anymore, but we must
		 * still monitor the server connection for a possible close
		 * while the request is being uploaded, so we don't disable
		 * reading.
		 */
		/* channel_dont_read(chn); */

		if (txn->req.msg_state < HTTP_MSG_DONE) {
			/* The client seems to still be sending data, probably
			 * because we got an error response during an upload.
			 * We have the choice of either breaking the connection
			 * or letting it pass through. Let's do the later.
			 */
			return;
		}

		/* When we get here, it means that both the request and the
		 * response have finished receiving. Depending on the connection
		 * mode, we'll have to wait for the last bytes to leave in either
		 * direction, and sometimes for a close to be effective.
		 */
		if ((txn->flags & TX_CON_WANT_MSK) == TX_CON_WANT_TUN) {
			channel_auto_read(chn);
			chn->flags |= CF_NEVER_WAIT;
			if (b_data(&chn->buf))
				return;
			txn->rsp.msg_state = HTTP_MSG_TUNNEL;
		}
		else {
			/* we're not expecting any new data to come for this
			 * transaction, so we can close it.
			 */
			if (!(chn->flags & (CF_SHUTW|CF_SHUTW_NOW))) {
				channel_shutr_now(chn);
				channel_shutw_now(chn);
			}
		}
		goto check_channel_flags;
	}

	if (txn->rsp.msg_state == HTTP_MSG_CLOSING) {
	  http_msg_closing:
		/* nothing else to forward, just waiting for the output buffer
		 * to be empty and for the shutw_now to take effect.
		 */
		if (channel_is_empty(chn)) {
			txn->rsp.msg_state = HTTP_MSG_CLOSED;
			goto http_msg_closed;
		}
		else if (chn->flags & CF_SHUTW) {
			txn->rsp.err_state = txn->rsp.msg_state;
			txn->rsp.msg_state = HTTP_MSG_ERROR;
			HA_ATOMIC_ADD(&s->be->be_counters.cli_aborts, 1);
			if (objt_server(s->target))
				HA_ATOMIC_ADD(&objt_server(s->target)->counters.cli_aborts, 1);
			goto end;
		}
		return;
	}

	if (txn->rsp.msg_state == HTTP_MSG_CLOSED) {
	  http_msg_closed:
		/* drop any pending data */
		channel_truncate(chn);
		channel_abort(&s->req);
		goto end;
	}

  check_channel_flags:
	/* Here, we are in HTTP_MSG_DONE or HTTP_MSG_TUNNEL */
	if (chn->flags & (CF_SHUTW|CF_SHUTW_NOW)) {
		/* if we've just closed an output, let's switch */
		txn->rsp.msg_state = HTTP_MSG_CLOSING;
		goto http_msg_closing;
	}

  end:
	chn->analysers &= AN_RES_FLT_END;
	if (txn->rsp.msg_state == HTTP_MSG_TUNNEL && HAS_RSP_DATA_FILTERS(s))
		chn->analysers |= AN_RES_FLT_XFER_DATA;
	channel_auto_close(chn);
	channel_auto_read(chn);
}

void htx_server_error(struct stream *s, struct stream_interface *si, int err,
		      int finst, const struct buffer *msg)
{
	channel_auto_read(si_oc(si));
	channel_abort(si_oc(si));
	channel_auto_close(si_oc(si));
	channel_erase(si_oc(si));
	channel_auto_close(si_ic(si));
	channel_auto_read(si_ic(si));
	if (msg) {
		struct channel *chn = si_ic(si);
		struct htx *htx;

		htx = htx_from_buf(&chn->buf);
		htx_add_oob(htx, ist2(msg->area, msg->data));
		//FLT_STRM_CB(s, flt_htx_reply(s, s->txn->status, htx));
		b_set_data(&chn->buf, b_size(&chn->buf));
		c_adv(chn, htx->data);
		chn->total += htx->data;
	}
	if (!(s->flags & SF_ERR_MASK))
		s->flags |= err;
	if (!(s->flags & SF_FINST_MASK))
		s->flags |= finst;
}

void htx_reply_and_close(struct stream *s, short status, struct buffer *msg)
{
	channel_auto_read(&s->req);
	channel_abort(&s->req);
	channel_auto_close(&s->req);
	channel_erase(&s->req);
	channel_truncate(&s->res);

	s->txn->flags &= ~TX_WAIT_NEXT_RQ;
	if (msg) {
		struct channel *chn = &s->res;
		struct htx *htx;

		htx = htx_from_buf(&chn->buf);
		htx_add_oob(htx, ist2(msg->area, msg->data));
		//FLT_STRM_CB(s, flt_htx_reply(s, s->txn->status, htx));
		b_set_data(&chn->buf, b_size(&chn->buf));
		c_adv(chn, htx->data);
		chn->total += htx->data;
	}

	s->res.wex = tick_add_ifset(now_ms, s->res.wto);
	channel_auto_read(&s->res);
	channel_auto_close(&s->res);
	channel_shutr_now(&s->res);
}

/*
 * Capture headers from message <htx> according to header list <cap_hdr>, and
 * fill the <cap> pointers appropriately.
 */
static void htx_capture_headers(struct htx *htx, char **cap, struct cap_hdr *cap_hdr)
{
	struct cap_hdr *h;
	int32_t pos;

	for (pos = htx_get_head(htx); pos != -1; pos = htx_get_next(htx, pos)) {
		struct htx_blk *blk = htx_get_blk(htx, pos);
		enum htx_blk_type type = htx_get_blk_type(blk);
		struct ist n, v;

		if (type == HTX_BLK_EOH)
			break;
		if (type != HTX_BLK_HDR)
			continue;

		n = htx_get_blk_name(htx, blk);

		for (h = cap_hdr; h; h = h->next) {
			if (h->namelen && (h->namelen == n.len) &&
			    (strncasecmp(n.ptr, h->name, h->namelen) == 0)) {
				if (cap[h->index] == NULL)
					cap[h->index] =
						pool_alloc(h->pool);

				if (cap[h->index] == NULL) {
					ha_alert("HTTP capture : out of memory.\n");
					break;
				}

				v = htx_get_blk_value(htx, blk);
				if (v.len > h->len)
					v.len = h->len;

				memcpy(cap[h->index], v.ptr, v.len);
				cap[h->index][v.len]=0;
			}
		}
	}
}

/* Delete a value in a header between delimiters <from> and <next>. The header
 * itself is delimited by <start> and <end> pointers. The number of characters
 * displaced is returned, and the pointer to the first delimiter is updated if
 * required. The function tries as much as possible to respect the following
 * principles :
 * - replace <from> delimiter by the <next> one unless <from> points to <start>,
 *   in which case <next> is simply removed
 * - set exactly one space character after the new first delimiter, unless there
 *   are not enough characters in the block being moved to do so.
 * - remove unneeded spaces before the previous delimiter and after the new
 *   one.
 *
 * It is the caller's responsibility to ensure that :
 *   - <from> points to a valid delimiter or <start> ;
 *   - <next> points to a valid delimiter or <end> ;
 *   - there are non-space chars before <from>.
 */
static int htx_del_hdr_value(char *start, char *end, char **from, char *next)
{
	char *prev = *from;

	if (prev == start) {
		/* We're removing the first value. eat the semicolon, if <next>
		 * is lower than <end> */
		if (next < end)
			next++;

		while (next < end && HTTP_IS_SPHT(*next))
			next++;
	}
	else {
		/* Remove useless spaces before the old delimiter. */
		while (HTTP_IS_SPHT(*(prev-1)))
			prev--;
		*from = prev;

		/* copy the delimiter and if possible a space if we're
		 * not at the end of the line.
		 */
		if (next < end) {
			*prev++ = *next++;
			if (prev + 1 < next)
				*prev++ = ' ';
			while (next < end && HTTP_IS_SPHT(*next))
				next++;
		}
	}
	memmove(prev, next, end - next);
	return (prev - next);
}


/* Formats the start line of the request (without CRLF) and puts it in <str> and
 * return the written lenght. The line can be truncated if it exceeds <len>.
 */
static size_t htx_fmt_req_line(const union h1_sl sl, char *str, size_t len)
{
	struct ist dst = ist2(str, 0);

	if (istcat(&dst, sl.rq.m, len) == -1)
		goto end;
	if (dst.len + 1 > len)
		goto end;
	dst.ptr[dst.len++] = ' ';

	if (istcat(&dst, sl.rq.u, len) == -1)
		goto end;
	if (dst.len + 1 > len)
		goto end;
	dst.ptr[dst.len++] = ' ';

	istcat(&dst, sl.rq.v, len);
  end:
	return dst.len;
}

/* Formats the start line of the response (without CRLF) and puts it in <str> and
 * return the written lenght. The line can be truncated if it exceeds <len>.
 */
static size_t htx_fmt_res_line(const union h1_sl sl, char *str, size_t len)
{
	struct ist dst = ist2(str, 0);

	if (istcat(&dst, sl.st.v, len) == -1)
		goto end;
	if (dst.len + 1 > len)
		goto end;
	dst.ptr[dst.len++] = ' ';

	if (istcat(&dst, sl.st.c, len) == -1)
		goto end;
	if (dst.len + 1 > len)
		goto end;
	dst.ptr[dst.len++] = ' ';

	istcat(&dst, sl.st.r, len);
  end:
	return dst.len;
}


/*
 * Print a debug line with a start line.
 */
static void htx_debug_stline(const char *dir, struct stream *s, const union h1_sl sl)
{
        struct session *sess = strm_sess(s);
        int max;

        chunk_printf(&trash, "%08x:%s.%s[%04x:%04x]: ", s->uniq_id, s->be->id,
                     dir,
                     objt_conn(sess->origin) ? (unsigned short)objt_conn(sess->origin)->handle.fd : -1,
                     objt_cs(s->si[1].end) ? (unsigned short)objt_cs(s->si[1].end)->conn->handle.fd : -1);

        max = sl.rq.m.len;
        UBOUND(max, trash.size - trash.data - 3);
        chunk_memcat(&trash, sl.rq.m.ptr, max);
        trash.area[trash.data++] = ' ';

        max = sl.rq.u.len;
        UBOUND(max, trash.size - trash.data - 2);
        chunk_memcat(&trash, sl.rq.u.ptr, max);
        trash.area[trash.data++] = ' ';

        max = sl.rq.v.len;
        UBOUND(max, trash.size - trash.data - 1);
        chunk_memcat(&trash, sl.rq.v.ptr, max);
        trash.area[trash.data++] = '\n';

        shut_your_big_mouth_gcc(write(1, trash.area, trash.data));
}

/*
 * Print a debug line with a header.
 */
static void htx_debug_hdr(const char *dir, struct stream *s, const struct ist n, const struct ist v)
{
        struct session *sess = strm_sess(s);
        int max;

        chunk_printf(&trash, "%08x:%s.%s[%04x:%04x]: ", s->uniq_id, s->be->id,
                     dir,
                     objt_conn(sess->origin) ? (unsigned short)objt_conn(sess->origin)->handle.fd : -1,
                     objt_cs(s->si[1].end) ? (unsigned short)objt_cs(s->si[1].end)->conn->handle.fd : -1);

        max = n.len;
        UBOUND(max, trash.size - trash.data - 3);
        chunk_memcat(&trash, n.ptr, max);
        trash.area[trash.data++] = ':';
        trash.area[trash.data++] = ' ';

        max = v.len;
        UBOUND(max, trash.size - trash.data - 1);
        chunk_memcat(&trash, v.ptr, max);
        trash.area[trash.data++] = '\n';

        shut_your_big_mouth_gcc(write(1, trash.area, trash.data));
}


__attribute__((constructor))
static void __htx_protocol_init(void)
{
}


/*
 * Local variables:
 *  c-indent-level: 8
 *  c-basic-offset: 8
 * End:
 */