[MAJOR] complete support for linux 2.6 kernel splicing
This code provides support for linux 2.6 kernel splicing. This feature
appeared in kernel 2.6.25, but initial implementations were awkward and
buggy. A kernel >= 2.6.29-rc1 is recommended, as well as some optimization
patches.
Using pipes, this code is able to pass network data directly between
sockets. The pipes are a bit annoying to manage (fd creation, release,
...) but finally work quite well.
Preliminary tests show that on high bandwidths, there's a substantial
gain (approx +50%, only +20% with kernel workarounds for corruption
bugs). With 2000 concurrent connections, with Myricom NICs, haproxy
now more easily achieves 4.5 Gbps for 1 process and 6 Gbps for two
processes buffers. 8-9 Gbps are easily reached with smaller numbers
of connections.
We also try to splice out immediately after a splice in by making
profit from the new ability for a data producer to notify the
consumer that data are available. Doing this ensures that the
data are immediately transferred between sockets without latency,
and without having to re-poll. Performance on small packets has
considerably increased due to this method.
Earlier kernels return only one TCP segment at a time in non-blocking
splice-in mode, while newer return as many segments as may fit in the
pipe. To work around this limitation without hurting more recent kernels,
we try to collect as much data as possible, but we stop when we believe
we have read 16 segments, then we forward everything at once. It also
ensures that even upon shutdown or EAGAIN the data will be forwarded.
Some tricks were necessary because the splice() syscall does not make
a difference between missing data and a pipe full, it always returns
EAGAIN. The trick consists in stop polling in case of EAGAIN and a non
empty pipe.
The receiver waits for the buffer to be empty before using the pipe.
This is in order to avoid confusion between buffer data and pipe data.
The BF_EMPTY flag now covers the pipe too.
Right now the code is disabled by default. It needs to be built with
CONFIG_HAP_LINUX_SPLICE, and the instances intented to use splice()
must have "option splice-response" (or option splice-request) enabled.
It is probably desirable to keep a pool of pre-allocated pipes to
avoid having to create them for every session. This will be worked
on later.
Preliminary tests show very good results, even with the kernel
workaround causing one memcpy(). At 3000 connections, performance
has moved from 3.2 Gbps to 4.7 Gbps.
diff --git a/src/haproxy.c b/src/haproxy.c
index 771fa0b..5911b0c 100644
--- a/src/haproxy.c
+++ b/src/haproxy.c
@@ -902,7 +902,7 @@
/* on very high loads, a sigpipe sometimes happen just between the
* getsockopt() which tells "it's OK to write", and the following write :-(
*/
-#ifndef MSG_NOSIGNAL
+#if !defined(MSG_NOSIGNAL) || defined(CONFIG_HAP_LINUX_SPLICE)
signal(SIGPIPE, SIG_IGN);
#endif