diff --git a/src/stream.c b/src/stream.c
index ed97e48..15c5538 100644
--- a/src/stream.c
+++ b/src/stream.c
@@ -2262,10 +2262,10 @@
 		if ((sess->fe->options & PR_O_CONTSTATS) && (s->flags & SF_BE_ASSIGNED))
 			stream_process_counters(s);
 
-		if (si_f->state == SI_ST_EST && obj_type(si_f->end) != OBJ_TYPE_APPCTX)
+		if (si_f->state == SI_ST_EST)
 			si_update(si_f);
 
-		if (si_b->state == SI_ST_EST && obj_type(si_b->end) != OBJ_TYPE_APPCTX)
+		if (si_b->state == SI_ST_EST)
 			si_update(si_b);
 
 		req->flags &= ~(CF_READ_NULL|CF_READ_PARTIAL|CF_WRITE_NULL|CF_WRITE_PARTIAL|CF_READ_ATTACHED);
@@ -2289,23 +2289,6 @@
 			req->rex = TICK_ETERNITY;
 		}
 
-		/* When any of the stream interfaces is attached to an applet,
-		 * we have to call it here. Note that this one may wake the
-		 * task up again. If at least one applet was called, the current
-		 * task might have been woken up, in which case we don't want it
-		 * to be requeued to the wait queue but rather to the run queue
-		 * to run ASAP. The bitwise "or" in the condition ensures that
-		 * both functions are always called and that we wake up if at
-		 * least one did something.
-		 */
-		if ((si_applet_call(si_b) | si_applet_call(si_f)) != 0) {
-			if (task_in_rq(t)) {
-				t->expire = TICK_ETERNITY;
-				stream_release_buffers(s);
-				return t;
-			}
-		}
-
 	update_exp_and_leave:
 		t->expire = tick_first(tick_first(req->rex, req->wex),
 				       tick_first(res->rex, res->wex));
diff --git a/src/stream_interface.c b/src/stream_interface.c
index 2fdd94f..55f0e22 100644
--- a/src/stream_interface.c
+++ b/src/stream_interface.c
@@ -1466,89 +1466,75 @@
 	stream_release_buffers(si_strm(si));
 }
 
-/* default update function for applets, to be used at the end of the i/o handler */
-static void stream_int_update_applet(struct stream_interface *si)
+/* updates the timers and flags of a stream interface attached to an applet.
+ * it's called from the upper layers after the buffers/channels have been
+ * updated.
+ */
+void stream_int_update_applet(struct stream_interface *si)
 {
-	int old_flags = si->flags;
 	struct channel *ic = si_ic(si);
 	struct channel *oc = si_oc(si);
 
-	DPRINTF(stderr, "%s: si=%p, si->state=%d ic->flags=%08x oc->flags=%08x\n",
-		__FUNCTION__,
-		si, si->state, ic->flags, oc->flags);
-
-	if (si->state != SI_ST_EST)
-		return;
-
-	if ((oc->flags & (CF_SHUTW|CF_SHUTW_NOW)) == CF_SHUTW_NOW &&
-	    channel_is_empty(oc))
-		si_shutw(si);
-
-	if ((oc->flags & (CF_SHUTW|CF_SHUTW_NOW)) == 0 && channel_may_recv(oc))
-		si->flags |= SI_FL_WAIT_DATA;
-
-	/* we're almost sure that we need some space if the buffer is not
-	 * empty, even if it's not full, because the applets can't fill it.
-	 */
-	if ((ic->flags & (CF_SHUTR|CF_DONT_READ)) == 0 && !channel_is_empty(ic))
-		si->flags |= SI_FL_WAIT_ROOM;
-
-	if (oc->flags & CF_WRITE_ACTIVITY) {
-		if (tick_isset(oc->wex))
-			oc->wex = tick_add_ifset(now_ms, oc->wto);
-	}
-
-	if (ic->flags & CF_READ_ACTIVITY ||
-	    (oc->flags & CF_WRITE_ACTIVITY && !(si->flags & SI_FL_INDEP_STR))) {
-		if (tick_isset(ic->rex))
-			ic->rex = tick_add_ifset(now_ms, ic->rto);
-	}
-
-	/* save flags to detect changes */
-	old_flags = si->flags;
-	if (likely((oc->flags & (CF_SHUTW|CF_WRITE_PARTIAL|CF_DONT_READ)) == CF_WRITE_PARTIAL &&
-		   channel_may_recv(oc) &&
-		   (si_opposite(si)->flags & SI_FL_WAIT_ROOM)))
-		si_chk_rcv(si_opposite(si));
-
-	if (((ic->flags & CF_READ_PARTIAL) && !channel_is_empty(ic)) &&
-	    (ic->pipe /* always try to send spliced data */ ||
-	     (ic->buf->i == 0 && (si_opposite(si)->flags & SI_FL_WAIT_DATA)))) {
-		si_chk_snd(si_opposite(si));
-		/* check if the consumer has freed some space */
-		if (channel_may_recv(ic) && !ic->pipe)
+	/* Check if we need to close the read side */
+	if (!(ic->flags & CF_SHUTR)) {
+		/* Read not closed, update FD status and timeout for reads */
+		if ((ic->flags & CF_DONT_READ) || !channel_may_recv(ic)) {
+			/* stop reading */
+			if (!(si->flags & SI_FL_WAIT_ROOM)) {
+				if (!(ic->flags & CF_DONT_READ)) /* full */
+					si->flags |= SI_FL_WAIT_ROOM;
+				ic->rex = TICK_ETERNITY;
+			}
+		}
+		else {
+			/* (re)start reading and update timeout. Note: we don't recompute the timeout
+			 * everytime we get here, otherwise it would risk never to expire. We only
+			 * update it if is was not yet set. The stream socket handler will already
+			 * have updated it if there has been a completed I/O.
+			 */
 			si->flags &= ~SI_FL_WAIT_ROOM;
+			if (!(ic->flags & (CF_READ_NOEXP|CF_DONT_READ)) && !tick_isset(ic->rex))
+				ic->rex = tick_add_ifset(now_ms, ic->rto);
+		}
 	}
 
-	/* Note that we're trying to wake up in two conditions here :
-	 *  - special event, which needs the holder task attention
-	 *  - status indicating that the applet can go on working. This
-	 *    is rather hard because we might be blocking on output and
-	 *    don't want to wake up on input and vice-versa. The idea is
-	 *    to only rely on the changes the chk_* might have performed.
-	 */
-	if (/* check stream interface changes */
-	    ((old_flags & ~si->flags) & (SI_FL_WAIT_ROOM|SI_FL_WAIT_DATA)) ||
-
-	    /* changes on the production side */
-	    (ic->flags & (CF_READ_NULL|CF_READ_ERROR)) ||
-	    si->state != SI_ST_EST ||
-	    (si->flags & SI_FL_ERR) ||
-	    ((ic->flags & CF_READ_PARTIAL) &&
-	     (!ic->to_forward || si_opposite(si)->state != SI_ST_EST)) ||
-
-	    /* changes on the consumption side */
-	    (oc->flags & (CF_WRITE_NULL|CF_WRITE_ERROR)) ||
-	    ((oc->flags & CF_WRITE_ACTIVITY) &&
-	     ((oc->flags & CF_SHUTW) ||
-	      ((oc->flags & CF_WAKE_WRITE) &&
-	       (si_opposite(si)->state != SI_ST_EST ||
-	        (channel_is_empty(oc) && !oc->to_forward)))))) {
-		if (!(si->flags & SI_FL_DONT_WAKE))
-			task_wakeup(si_task(si), TASK_WOKEN_IO);
+	/* Check if we need to close the write side */
+	if (!(oc->flags & CF_SHUTW)) {
+		/* Write not closed, update FD status and timeout for writes */
+		if (channel_is_empty(oc)) {
+			/* stop writing */
+			if (!(si->flags & SI_FL_WAIT_DATA)) {
+				if ((oc->flags & CF_SHUTW_NOW) == 0)
+					si->flags |= SI_FL_WAIT_DATA;
+				oc->wex = TICK_ETERNITY;
+			}
+		}
+		else {
+			/* (re)start writing and update timeout. Note: we don't recompute the timeout
+			 * everytime we get here, otherwise it would risk never to expire. We only
+			 * update it if is was not yet set. The stream socket handler will already
+			 * have updated it if there has been a completed I/O.
+			 */
+			si->flags &= ~SI_FL_WAIT_DATA;
+			if (!tick_isset(oc->wex)) {
+				oc->wex = tick_add_ifset(now_ms, oc->wto);
+				if (tick_isset(ic->rex) && !(si->flags & SI_FL_INDEP_STR)) {
+					/* Note: depending on the protocol, we don't know if we're waiting
+					 * for incoming data or not. So in order to prevent the socket from
+					 * expiring read timeouts during writes, we refresh the read timeout,
+					 * except if it was already infinite or if we have explicitly setup
+					 * independent streams.
+					 */
+					ic->rex = tick_add_ifset(now_ms, ic->rto);
+				}
+			}
+		}
 	}
-	if (ic->flags & CF_READ_ACTIVITY)
-		ic->flags &= ~CF_READ_DONTWAIT;
+
+	if (!(si->flags & (SI_FL_WAIT_ROOM|SI_FL_WAIT_DATA)) &&
+	    !(ic->flags & CF_DONT_READ) &&
+	    (!(ic->flags & CF_SHUTR) || !(oc->flags & CF_SHUTW)))
+		appctx_wakeup(si_appctx(si));
 }
 
 /*