When NetScaler application switch is used as L3+ switch, information
regarding the original IP and TCP headers are lost as a new TCP
connection is created between the NetScaler and the backend server.

NetScaler provides a feature to insert in the TCP data the original data
that can then be consumed by the backend server.

Specifications and documentations from NetScaler:
  https://support.citrix.com/article/CTX205670
  https://www.citrix.com/blogs/2016/04/25/how-to-enable-client-ip-in-tcpip-option-of-netscaler/

When CIP is enabled on the NetScaler, then a TCP packet is inserted just after
the TCP handshake. Two versions of the CIP extension exist.

Legacy (NetScaler < 10.5)

  - CIP magic number : 4 bytes
    Both sender and receiver have to agree on a magic number so that
    they both handle the incoming data as a NetScaler Client IP insertion
    packet.

  - Header length : 4 bytes
    Defines the length on the remaining data.

  - IP header : >= 20 bytes if IPv4, 40 bytes if IPv6
    Contains the header of the last IP packet sent by the client during TCP
    handshake.

  - TCP header : >= 20 bytes
    Contains the header of the last TCP packet sent by the client during TCP
    handshake.

Standard (NetScaler >= 10.5)

  - CIP magic number : 4 bytes
    Both sender and receiver have to agree on a magic number so that
    they both handle the incoming data as a NetScaler Client IP insertion
    packet.

  - CIP length : 4 bytes
    Defines the total length on the CIP header.

  - CIP type: 2 bytes
    Always set to 1.

  - Header length : 2 bytes
    Defines the length on the remaining data.

  - IP header : >= 20 bytes if IPv4, 40 bytes if IPv6
    Contains the header of the last IP packet sent by the client during TCP
    handshake.

  - TCP header : >= 20 bytes
    Contains the header of the last TCP packet sent by the client during TCP
    handshake.