[TESTS] refine non-regression tests and add 4 new tests
These were required to be updated for 1.4.
diff --git a/tests/test-fsm.cfg b/tests/test-fsm.cfg
index 3b6dbdf..8fcf265 100644
--- a/tests/test-fsm.cfg
+++ b/tests/test-fsm.cfg
@@ -135,19 +135,20 @@
# server = nc6 --half-close -lp4000
# client = (printf "GET / HTTP/1.0\r\n\r\n"; sleep 1) | nc 127.1 8001
# action : wait 9 seconds and check response
-# result : client exits with 504, log is emitted immediately, server must be
-# terminated by hand. Logs indicate "sH--" with correct timers, which
-# is 9s total (sleep 1 + 8 for server response).
-# example: 0/0/0/-1/9002 504 194 - - sH--
+# result : client exits with 504, log is emitted immediately, server exits
+# immediately. Logs indicate "sH--" with correct timers, which
+# is 8s regardless of the "sleep 1".
+# example: 0/0/0/-1/8002 504 194 - - sH--
-########### test15: process_srv(), client close causing server close
+########### test15: process_srv(), client close not causing server close
# setup :
# server = nc6 -lp4000
# client = (printf "GET / HTTP/1.0\r\n\r\n"; sleep 1) | nc 127.1 8001
-# action : wait 1 second and check response
-# result : client exits with 502, log is emitted immediately, server closes.
-# Logs indicate "SH--" with correct timers.
-# example: 0/0/0/-1/1002 502 204 - - SH--
+# action : wait 9 second and check response
+# result : client exits with 504, log is emitted immediately, server exits
+# immediately. Logs indicate "sH--" with correct timers, which
+# is 8s regardless of the "sleep 1".
+# example: 0/0/0/-1/8002 504 194 - - sH--
########### test16: process_srv(), read timeout on server headers
# setup :
@@ -166,7 +167,7 @@
# action : wait at least 12 seconds and check the logs
# result : client returns 503 and must be terminated by hand. Log is emitted
# immediately. Logs indicate "sC--" with correct timers.
-# example: 0/6001/-1/-1/12001 503 212 - - sC--
+# example: 0/0/-1/-1/12001 503 212 - - sC--
########### test18: process_srv(), client close during connection time-out
# setup :
@@ -176,7 +177,7 @@
# action : wait at least 12 seconds and check the logs
# result : client returns 503 and automatically closes. Log is emitted
# immediately. Logs indicate "sC--" with correct timers.
-# example: 0/6001/-1/-1/12001 503 212 - - sC--
+# example: 0/0/-1/-1/12001 503 212 - - sC--
########### test19: process_srv(), immediate server close after empty response
# setup :
@@ -209,10 +210,46 @@
# setup :
# server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n\r\n") | nc -lp4000
# client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8001
-# action : wait 5s for the request body to timeout.
+# action : wait 7s for the request body to timeout.
# result : The server receives the request and responds immediately with 200.
-# Log is emitted immediately. Logs indicate "----" with correct timers.
-# example: 5002/0/0/0/5002 200 31 - - ----
+# Log is emitted after the timeout occurs. Logs indicate "cD--" with correct timers.
+# example: 1/0/0/0/7004 200 31 - - cD--
+
+########### test23: process_srv(), client close on request body
+# setup :
+# server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n\r\n") | nc -lp4000
+# client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8001
+# action : wait 2s then press Ctrl-C on the client
+# result : The server immediately aborts and the logs are emitted immediately with a 400.
+# Logs indicate "CD--" with correct timers.
+# example: 1/0/0/0/1696 400 31 - - CD--
+
+########### test24 process_srv(), server close on request body
+# setup :
+# server = (printf "HTTP/1.0 200 OK\r\nTest: test\r\n\r\n") | nc -lp4000
+# client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8001
+# action : wait 2s then press Ctrl-C on the server and press enter a few times on the client
+# result : The logs are emitted immediately with a 200 (server's incomplete response).
+# Logs indicate "SD--" with correct timers. Client must be terminated by hand.
+# example: 1/0/0/0/2186 200 31 - - SD--
+
+########### test25: process_srv(), client timeout on request body when url_param is used
+# setup :
+# server = none
+# client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8003
+# action : wait 5s for the request body to timeout.
+# result : The client receives a 408 and closes. The log is emitted immediately.
+# Logs indicate "cD--" with correct timers.
+# example: 0/-1/-1/-1/5003 408 212 - - cD--
+
+########### test26: process_srv(), client abort on request body when url_param is used
+# setup :
+# server = none
+# client = (printf "POST / HTTP/1.0\r\nContent-length: 20\r\n\r\n";cat) | nc 127.1 8003
+# action : wait 2s then press Ctrl-C on the client
+# result : The logs are emitted immediately with a 400.
+# Logs indicate "CD--" with correct timers.
+# example: 594/-1/-1/-1/594 400 187 - - CD--
@@ -243,7 +280,7 @@
timeout server 8s
timeout queue 9s
- balance url_param foo check_post
+ balance roundrobin
server srv4000 127.0.0.1:4000
# connect port 8002 to nowhere
@@ -264,6 +301,23 @@
balance url_param foo check_post
server srv4000 192.168.255.255:4000
+# connect port 8003 to localhost:4000 with url_param
+listen frt8003
+ log global
+ bind :8003
+ mode http
+ option httplog
+ maxconn 100
+
+ timeout http-request 5s
+ timeout connect 6s
+ timeout client 7s
+ timeout server 8s
+ timeout queue 9s
+
+ balance url_param foo check_post
+ server srv4000 127.0.0.1:4000
+
# listen frt8002
# log global