diff --git a/include/proto/filters.h b/include/proto/filters.h
index 7020285..c351f6e 100644
--- a/include/proto/filters.h
+++ b/include/proto/filters.h
@@ -114,7 +114,8 @@
 void flt_http_reply(struct stream *s, short status, const struct chunk *msg);
 
 int  flt_start_analyze(struct stream *s, struct channel *chn, unsigned int an_bit);
-int  flt_analyze(struct stream *s, struct channel *chn, unsigned int an_bit);
+int  flt_pre_analyze(struct stream *s, struct channel *chn, unsigned int an_bit);
+int  flt_post_analyze(struct stream *s, struct channel *chn, unsigned int an_bit);
 int  flt_analyze_http_headers(struct stream *s, struct channel *chn, unsigned int an_bit);
 int  flt_end_analyze(struct stream *s, struct channel *chn, unsigned int an_bit);
 
diff --git a/include/types/channel.h b/include/types/channel.h
index b31f493..dd50993 100644
--- a/include/types/channel.h
+++ b/include/types/channel.h
@@ -156,6 +156,7 @@
 #define AN_RES_HTTP_PROCESS_FE  0x00040000  /* process frontend's HTTP part (same for now) */
 #define AN_RES_STORE_RULES      0x00080000  /* table persistence matching */
 #define AN_RES_HTTP_XFER_BODY   0x00100000  /* forward response body */
+#define AN_RES_ALL              0x001f0000  /* all of the response analysers */
 
 #define AN_FLT_START_FE         0x01000000
 #define AN_FLT_START_BE         0x02000000
diff --git a/include/types/filters.h b/include/types/filters.h
index e01e225..62fcfb1 100644
--- a/include/types/filters.h
+++ b/include/types/filters.h
@@ -77,10 +77,14 @@
  *  - channel_start_analyze: Called when a filter starts to analyze a channel.
  *                          Returns a negative value if an error occurs, 0 if
  *                          it needs to wait, any other value otherwise.
- *  - channel_analyze     : Called before each analyzer attached to a channel,
+ *  - channel_pre_analyze : Called before each analyzer attached to a channel,
  *                          expects analyzers responsible for data sending.
  *                          Returns a negative value if an error occurs, 0 if
  *                          it needs to wait, any other value otherwise.
+ *  - channel_post_analyze: Called after each analyzer attached to a channel,
+ *                          expects analyzers responsible for data sending.
+ *                          Returns a negative value if an error occurs,
+ *                          any other value otherwise.
  *  - channel_end_analyze : Called when all other analyzers have finished their
  *                          processing.
  *                          Returns a negative value if an error occurs, 0 if
@@ -140,7 +144,8 @@
 	 * Channel callbacks
 	 */
 	int  (*channel_start_analyze)(struct stream *s, struct filter *f, struct channel *chn);
-	int  (*channel_analyze)      (struct stream *s, struct filter *f, struct channel *chn, unsigned int an_bit);
+	int  (*channel_pre_analyze)  (struct stream *s, struct filter *f, struct channel *chn, unsigned int an_bit);
+	int  (*channel_post_analyze) (struct stream *s, struct filter *f, struct channel *chn, unsigned int an_bit);
 	int  (*channel_end_analyze)  (struct stream *s, struct filter *f, struct channel *chn);
 
 	/*
@@ -202,6 +207,8 @@
 	                                    * 0: request channel, 1: response channel */
 	unsigned int    fwd[2];            /* Offset, relative to buf->p, to the next byte to forward for a specific channel
 	                                    * 0: request channel, 1: response channel */
+	unsigned int    pre_analyzers;     /* bit field indicating analyzers to pre-process */
+	unsigned int    post_analyzers;    /* bit field indicating analyzers to post-process */
 	struct list     list;              /* Next filter for the same proxy/stream */
 };
 
diff --git a/src/filters.c b/src/filters.c
index 051aa48..139440d 100644
--- a/src/filters.c
+++ b/src/filters.c
@@ -656,20 +656,23 @@
 }
 
 /*
- * Calls 'channel_analyze' callback for all filters attached to a stream. This
- * function is called before each analyzer attached to a channel, expects
- * analyzers responsible for data sending. 'channel_analyze' callback is
- * resumable, so this function returns 0 if an error occurs or if it needs to
- * wait, any other value otherwise.
+ * Calls 'channel_pre_analyze' callback for all filters attached to a
+ * stream. This function is called BEFORE each analyzer attached to a channel,
+ * expects analyzers responsible for data sending. 'channel_pre_analyze'
+ * callback is resumable, so this function returns 0 if an error occurs or if it
+ * needs to wait, any other value otherwise.
+ *
+ * Note this function can be called many times for the same analyzer. In fact,
+ * it is called until the analyzer finishes its processing.
  */
 int
-flt_analyze(struct stream *s, struct channel *chn, unsigned int an_bit)
+flt_pre_analyze(struct stream *s, struct channel *chn, unsigned int an_bit)
 {
 	int ret = 1;
 
 	RESUME_FILTER_LOOP(s, chn) {
-		if (FLT_OPS(filter)->channel_analyze) {
-			ret = FLT_OPS(filter)->channel_analyze(s, filter, chn, an_bit);
+		if (FLT_OPS(filter)->channel_pre_analyze && (filter->pre_analyzers & an_bit)) {
+			ret = FLT_OPS(filter)->channel_pre_analyze(s, filter, chn, an_bit);
 			if (ret <= 0)
 				BREAK_EXECUTION(s, chn, check_result);
 		}
@@ -680,6 +683,31 @@
 }
 
 /*
+ * Calls 'channel_post_analyze' callback for all filters attached to a
+ * stream. This function is called AFTER each analyzer attached to a channel,
+ * expects analyzers responsible for data sending. 'channel_post_analyze'
+ * callback is NOT resumable, so this function returns a 0 if an error occurs,
+ * any other value otherwise.
+ *
+ * Here, AFTER means when the analyzer finishes its processing.
+ */
+int
+flt_post_analyze(struct stream *s, struct channel *chn, unsigned int an_bit)
+{
+	struct filter *filter;
+	int            ret = 1;
+
+	list_for_each_entry(filter, &strm_flt(s)->filters, list) {
+		if (FLT_OPS(filter)->channel_post_analyze &&  (filter->post_analyzers & an_bit)) {
+			ret = FLT_OPS(filter)->channel_post_analyze(s, filter, chn, an_bit);
+			if (ret < 0)
+				break;
+		}
+	}
+	return handle_analyzer_result(s, chn, 0, ret);
+}
+
+/*
  * This function is the AN_FLT_HTTP_HDRS analyzer, used to filter HTTP headers
  * or a request or a response. Returns 0 if an error occurs or if it needs to
  * wait, any other value otherwise.
diff --git a/src/flt_trace.c b/src/flt_trace.c
index 8a9d14d..a052ab5 100644
--- a/src/flt_trace.c
+++ b/src/flt_trace.c
@@ -145,7 +145,8 @@
 	STRM_TRACE(conf, s, "%-25s: channel=%-10s - mode=%-5s (%s)",
 		   __FUNCTION__,
 		   channel_label(chn), proxy_mode(s), stream_pos(s));
-	register_data_filter(s, chn, filter);
+	filter->pre_analyzers  |= (AN_REQ_ALL | AN_RES_ALL);
+	filter->post_analyzers |= (AN_REQ_ALL | AN_RES_ALL);
 	return 1;
 }
 
@@ -216,10 +217,11 @@
 			ana = "unknown";
 	}
 
-	STRM_TRACE(conf, s, "%-25s: channel=%-10s - mode=%-5s (%s) - analyzer=%s",
+	STRM_TRACE(conf, s, "%-25s: channel=%-10s - mode=%-5s (%s) - "
+		   "analyzer=%s - step=%s",
 		   __FUNCTION__,
 		   channel_label(chn), proxy_mode(s), stream_pos(s),
-		   ana);
+		   ana, ((chn->analysers & an_bit) ? "PRE" : "POST"));
 	return 1;
 }
 
@@ -413,7 +415,8 @@
 
 	/* Handle channels activity */
 	.channel_start_analyze = trace_chn_start_analyze,
-	.channel_analyze       = trace_chn_analyze,
+	.channel_pre_analyze   = trace_chn_analyze,
+	.channel_post_analyze  = trace_chn_analyze,
 	.channel_end_analyze   = trace_chn_end_analyze,
 
 	/* Filter HTTP requests and responses */
diff --git a/src/stream.c b/src/stream.c
index 24eba1b..2ca3b36 100644
--- a/src/stream.c
+++ b/src/stream.c
@@ -1498,17 +1498,19 @@
 
 /* These 2 following macros call an analayzer for the specified channel if the
  * right flag is set. The first one is used for "filterable" analyzers. If a
- * stream has some registered filters, 'channel_analyaze' callback is called.
- * The second are used for other analyzers (AN_FLT_* and
+ * stream has some registered filters, pre and post analyaze callbacks are
+ * called. The second are used for other analyzers (AN_FLT_* and
  * AN_REQ/RES_HTTP_XFER_BODY) */
 #define FLT_ANALYZE(strm, chn, fun, list, back, flag, ...)			\
 	{									\
 		if ((list) & (flag)) {						\
 			if (HAS_FILTERS(strm)) {			        \
-				if (!flt_analyze((strm), (chn), (flag)))        \
+				if (!flt_pre_analyze((strm), (chn), (flag)))    \
 					break;				        \
 				if (!fun((strm), (chn), (flag), ##__VA_ARGS__))	\
 					break;					\
+				if (!flt_post_analyze((strm), (chn), (flag)))	\
+					break;					\
 			}							\
 			else {							\
 				if (!fun((strm), (chn), (flag), ##__VA_ARGS__))	\