diff --git a/doc/haproxy.1 b/doc/haproxy.1
index 209fb8c..001de15 100644
--- a/doc/haproxy.1
+++ b/doc/haproxy.1
@@ -6,7 +6,7 @@
 
 .SH SYNOPSIS
 
-haproxy -f <configuration\ file> [-n\ maxconn] [-N\ maxconn] [-d] [-D] [-q] [-V] [-c] [-p\ <pidfile>] [-s] [-l] [-dk] [-ds] [-de] [-dp] [-db] [-m\ <megs>] [{-sf|-st}\ pidlist...] 
+haproxy \-f <configuration\ file> [\-n\ maxconn] [\-N\ maxconn] [\-d] [\-D] [\-q] [\-V] [\-c] [\-p\ <pidfile>] [\-s] [\-l] [\-dk] [\-ds] [\-de] [\-dp] [\-db] [\-m\ <megs>] [{\-sf|\-st}\ pidlist...] 
 
 .SH DESCRIPTION
 
@@ -33,19 +33,19 @@
 .SH OPTIONS
 
 .TP
-\fB-f <configuration file>\fP
+\fB\-f <configuration file>\fP
 Specify configuration file path.
 
 .TP
-\fB-n <maxconn>\fP
+\fB\-n <maxconn>\fP
 Set the high limit for the total number of simultaneous connections.
 
 .TP
-\fB-N <maxconn>\fP
+\fB\-N <maxconn>\fP
 Set the high limit for the per-listener number of simultaneous connections.
 
 .TP
-\fB-d\fP
+\fB\-d\fP
 Start in foregreound with debugging mode enabled.
 When the proxy runs in this mode, it dumps every connections,
 disconnections, timestamps, and HTTP headers to stdout. This should
@@ -53,77 +53,77 @@
 starting up.
 
 .TP
-\fB-D\fP
+\fB\-D\fP
 Start in daemon mode.
 
 .TP
-\fB-q\fP
+\fB\-q\fP
 Disable messages on output.
 
 .TP
-\fB-V\fP
-Displays messages on output even when -q or 'quiet' are specified. Some
+\fB\-V\fP
+Displays messages on output even when \-q or 'quiet' are specified. Some
 information about pollers and config file are displayed during startup.
 
 .TP
-\fB-c\fP
+\fB\-c\fP
 Only checks config file and exits with code 0 if no error was found, or
 exits with code 1 if a syntax error was found.
 
 .TP
-\fB-p <pidfile>\fP
+\fB\-p <pidfile>\fP
 Ask the process to write down each of its children's pids to this file
 in daemon mode.
 
 .TP
-\fB-s\fP
+\fB\-s\fP
 Show statistics (only if compiled in).
 Statistics are only available if compiled in with the 'STATTIME' option.
 It's only used during code optimization phases, and will soon disappear.
 
 .TP
-\fB-l\fP
-Show even more statistics (implies '-s').
+\fB\-l\fP
+Show even more statistics (implies '\-s').
 
 .TP
-\fB-dk\fP
+\fB\-dk\fP
 Disable use of kqueue(). kqueue() is available only on BSD systems.
 
 .TP
-\fB-ds\fP
+\fB\-ds\fP
 Disable use of speculative epoll(). epoll() is available only on Linux 2.6
 and some custom Linux 2.4 systems.
 
 .TP
-\fB-de\fP
+\fB\-de\fP
 Disable use of epoll(). epoll() is available only on Linux 2.6
 and some custom Linux 2.4 systems.
 
 .TP
-\fB-dp\fP
+\fB\-dp\fP
 Disables use of poll(). select() might be used instead.
 
 .TP
-\fB-db\fP
+\fB\-db\fP
 Disables background mode (stays in foreground, useful for debugging).
-For debugging, the '-db' option is very useful as it temporarily
+For debugging, the '\-db' option is very useful as it temporarily
 disables daemon mode and multi-process mode. The service can then be
 stopped by simply pressing Ctrl-C, without having to edit the config nor
 run full debug.
 
 .TP
-\fB-m <megs>\fP
+\fB\-m <megs>\fP
 Enforce a memory usage limit to a maximum of <megs> megabytes.
 
 .TP
-\fB-sf <pidlist>\fP
+\fB\-sf <pidlist>\fP
 Send FINISH signal to the pids in pidlist after startup. The processes
 which receive this signal will wait for all sessions to finish before
 exiting. This option must be specified last, followed by any number of
 PIDs. Technically speaking, \fBSIGTTOU\fP and \fBSIGUSR1\fP are sent.
 
 .TP
-\fB-st <pidlist>\fP
+\fB\-st <pidlist>\fP
 Send TERMINATE signal to the pids in pidlist after startup. The processes
 which receive this signal will wait immediately terminate, closing all
 active sessions. This option must be specified last, followed by any number
@@ -135,31 +135,31 @@
 even if it is the local server. People who experience trouble receiving
 logs should ensure that their syslog daemon listens to the UDP socket.
 Several Linux distributions which ship with syslogd from the sysklogd
-package have UDP disabled by default. The \fB-r\fP option must be passed
+package have UDP disabled by default. The \fB\-r\fP option must be passed
 to the daemon in order to enable UDP.
 
 .SH SIGNALS
 Some signals have a special meaning for the haproxy daemon. Generally, they are used between daemons and need not be used by the administrator.
 .TP
-- \fBSIGUSR1\fP
+\- \fBSIGUSR1\fP
 Tells the daemon to stop all proxies and exit once all sessions are closed. It is often referred to as the "soft-stop" signal.
 .TP
-- \fBSIGTTOU\fP
-Tells the daemon to stop listening to all sockets. Used internally by \fB-sf\fP and \fB-st\fP.
+\- \fBSIGTTOU\fP
+Tells the daemon to stop listening to all sockets. Used internally by \fB\-sf\fP and \fB\-st\fP.
 .TP
-- \fBSIGTTIN\fP
+\- \fBSIGTTIN\fP
 Tells the daemon to restart listening to all sockets after a \fBSIGTTOU\fP. Used internally when there was a problem during hot reconfiguration.
 .TP
-- \fBSIGINT\fP and \fBSIGTERM\fP
+\- \fBSIGINT\fP and \fBSIGTERM\fP
 Both signals can be used to quickly stop the daemon.
 .TP
-- \fBSIGHUP\fP
+\- \fBSIGHUP\fP
 Dumps the status of all proxies and servers into the logs. Mostly used for trouble-shooting purposes.
 .TP
-\-\ \fBSIGQUIT\fP
+\- \fBSIGQUIT\fP
 Dumps information about memory pools into the logs. Mostly used for debugging purposes.
 .TP
-\-\ \fBSIGPIPE\fP
+\- \fBSIGPIPE\fP
 This signal is intercepted and ignored on systems without \fBMSG_NOSIGNAL\fP.
 
 .SH SEE ALSO