#REGTEST_TYPE=devel

# This reg-test checks that the connection and SSL sample fetches related to
# errors are functioning properly. It also tests the proper behaviour of the
# default HTTPS log format and of the error-log-format  option which allows to
# define a specific log format used only in case of connection error (otherwise
# a line following the configured log-format is output).
#
# It works by sending request through three different paths, one using a custom
# log-format line that contains the connection error and SSL handshake error
# sample fetches, one using the default HTTPS log-format and one using the
# legacy error log format.
#
# The output log lines are caught by syslog blocks (one for each path) and
# compared to an expected format.
# Since the syslog is not by design synchronized with the Varnish clients and
# servers, synchronization is achieved through barriers, which ensure that
# syslog messages arrive in the right order.
#
# In order to ensure that the log line raised in case of connection error if an
# error-log-format is defined still follows the log-separate-error option, the
# log lines raised by the https_fmt_lst listener will be sent to two separate
# syslog servers.
#

varnishtest "Test the connection and SSL error fetches."
feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev2)'"
feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL) && ssllib_name_startswith(OpenSSL)'"
feature cmd "command -v socat"
feature ignore_unknown_macro

server s1 -repeat 4 {
  rxreq
  txresp
} -start

barrier b1 cond 4 -cyclic
barrier b2 cond 2 -cyclic


syslog Slg_cust_fmt -level info {
    recv
    expect ~ ".*conn_status:\"0:Success\" hsk_err:\"0:-\" CN=\"/C=FR/O=HAProxy Technologies/CN=Client\",serial=1007,hash=063DCC2E6A9159E66994B325D6D2EF3D17A75B6F"

    barrier b1 sync

    recv
    expect ~ "ERROR.*conn_status:\"30:SSL client CA chain cannot be verified\" hsk_err:\"134:.*:certificate verify failed\" CN=\"/C=FR/O=HAProxy Technologies/CN=Client\",serial=1007,hash=063DCC2E6A9159E66994B325D6D2EF3D17A75B6F"

    barrier b1 sync

    recv
    expect ~ "ERROR.*conn_status:\"31:SSL client certificate not trusted\" hsk_err:\"134:.*:certificate verify failed\" CN=\"/C=FR/O=HAProxy Technologies/CN=Client\",serial=1007,hash=063DCC2E6A9159E66994B325D6D2EF3D17A75B6F"

    barrier b1 sync

    # In case of an error occurring before the certificate verification process,
    # the client certificate chain is never parsed and verified so we can't
    # have information about the client's certificate.
    recv
    expect ~ "ERROR.*conn_status:\"34:SSL handshake failure\" hsk_err:\"193:.*:no shared cipher\" CN=\"\",serial=-,hash=-"
} -start

syslog Slg_https_fmt -level info {
    recv
    expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/s1.*0/0000000000000000/0/0/.? -/TLSv1.2/AES256-GCM-SHA384"

    barrier b1 sync
} -start

syslog Slg_https_fmt_err -level info {
    recv
    expect ~ "ERROR.*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*30/0000000000000086/0/2/.? -/TLSv1.2/\\(NONE\\)"

    barrier b1 sync

    recv
    expect ~ "ERROR.*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*31/0000000000000086/20/0/.? -/TLSv1.2/\\(NONE\\)"

    barrier b1 sync

    recv
    expect ~ "ERROR.*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*34/00000000000000C1/0/0/.? -/TLSv1.2/\\(NONE\\)"
} -start

syslog Slg_logconnerror -level info {
    recv
    expect ~ ".*logconnerror_ssl_lst~ logconnerror_ssl_lst/s1"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL client CA chain cannot be verified"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL client certificate not trusted"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL handshake failure"
} -start

syslog Slg_bcknd -level info {
    recv
    expect ~ ".*bc_err:0:\"Success\" ssl_bc_err:0:"

    barrier b2 sync

    recv
    expect ~ ".*bc_err:34:\"SSL handshake failure\" ssl_bc_err:134:.*:certificate verify failed"

    barrier b2 sync

    recv
    expect ~ ".*bc_err:32:\"Server presented an SSL certificate different from the configured one\" ssl_bc_err:134:.*:certificate verify failed"

    barrier b2 sync

    # Verify errors on the server side cannot be caught when using TLSv1.3 but it works for TLSv1.2
    recv
    expect ~ ".*bc_err:34:\"SSL handshake failure\" ssl_bc_err:1048:.*:tlsv1 alert unknown ca"

    barrier b2 sync

    recv
    expect ~ ".*bc_err:34:\"SSL handshake failure\" ssl_bc_err:1040:.*:sslv3 alert handshake failure"

    barrier b2 sync

    recv
    expect ~ ".*bc_err:34:\"SSL handshake failure\" ssl_bc_err:1040:.*:sslv3 alert handshake failure"
} -start


haproxy h1 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-buffer-size 1
        stats socket "${tmpdir}/h1/stats" level admin
    .if openssl_version_atleast(3.0.0)
        set-var proc.ssl_error_mask str(7FFFFF),hex2i
    .else
        set-var proc.ssl_error_mask str(FFF),hex2i
    .endif

    defaults
        timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout client  "${HAPROXY_TEST_TIMEOUT-5s}"
        timeout server  "${HAPROXY_TEST_TIMEOUT-5s}"
        retries 0

    listen clear_lst
        bind "fd@${clearlst}"
        default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse force-tlsv12

        balance roundrobin
        server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock"
        server https_fmt "${tmpdir}/https_logfmt_ssl.sock"
        server logconnerror "${tmpdir}/logconnerror_ssl.sock"


    listen clear_wrong_ciphers_lst
        bind "fd@${wrongcipherslst}"
        default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse force-tlsv12 ciphers "aECDSA"

        balance roundrobin
        server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock"
        server https_fmt "${tmpdir}/https_logfmt_ssl.sock"
        server logconnerror "${tmpdir}/logconnerror_ssl.sock"


    # This listener will be used to test backend fetches (bc_err and ssl_bc_err)
    listen clear_backend_errors_lst
        bind "fd@${backenderrorslst}"
        log ${Slg_bcknd_addr}:${Slg_bcknd_port} local0
        log-format "bc_err:%[bc_err]:%{+Q}[bc_err_str]\ ssl_bc_err:%[ssl_bc_err,and(proc.ssl_error_mask)]:%{+Q}[ssl_bc_err_str]"
        error-log-format "ERROR bc_err:%[bc_err]:%{+Q}[bc_err_str]\ ssl_bc_err:%[ssl_bc_err,and(proc.ssl_error_mask)]:%[ssl_bc_err_str]"

        balance roundrobin
        server no_err "${tmpdir}/no_err_ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify required
        server srv_cert_rejected "${tmpdir}/srv_rejected_ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA1.crt verify required
        server mismatch_frontend "${tmpdir}/mismatch_fe_ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify required verifyhost str(toto)
        # We force TLSv1.2 for this specific case because server-side
        # verification errors cannot be caught by the backend fetches when
        # using TLSv1.3
        server clt_cert_rejected "${tmpdir}/rejected_ssl.sock" ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none force-tlsv12
        server wrong_ciphers "${tmpdir}/wrong_ciphers_ssl.sock" ssl verify none crt ${testdir}/client1.pem ca-file ${testdir}/ca-auth.crt force-tlsv12 ciphers "aECDSA"

        # No TLSv1.3 support with OpenSSL 1.0.2 so we duplicate the previous
        # wrong cipher test in this case so that the error log remains the same
.if openssl_version_before(1.1.1)
        server wrong_ciphers2 "${tmpdir}/wrong_ciphers_ssl.sock" ssl verify none crt ${testdir}/client1.pem ca-file ${testdir}/ca-auth.crt force-tlsv12 ciphers "aECDSA"
.else
        server wrong_ciphers_tls13 "${tmpdir}/wrong_ciphers_tls13_ssl.sock" ssl verify none crt ${testdir}/client1.pem ca-file ${testdir}/ca-auth.crt ciphersuites "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256" force-tlsv13
.endif


    listen cust_logfmt_ssl_lst
        log ${Slg_cust_fmt_addr}:${Slg_cust_fmt_port} local0
        mode http
        log-format "conn_status:\"%[fc_err]:%[fc_err_str]\" hsk_err:\"%[ssl_fc_err]:%[ssl_fc_err_str]\" CN=%{+Q}[ssl_c_s_dn],serial=%[ssl_c_serial,hex],hash=%[ssl_c_sha1,hex]"
        error-log-format "ERROR conn_status:\"%[fc_err]:%[fc_err_str]\" hsk_err:\"%[ssl_fc_err,and(proc.ssl_error_mask)]:%[ssl_fc_err_str]\" CN=%{+Q}[ssl_c_s_dn],serial=%[ssl_c_serial,hex],hash=%[ssl_c_sha1,hex]"
        bind "${tmpdir}/cust_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphers "kRSA"
        server s1 ${s1_addr}:${s1_port}

    listen https_logfmt_ssl_lst
        log ${Slg_https_fmt_addr}:${Slg_https_fmt_port} local0 info
        log ${Slg_https_fmt_err_addr}:${Slg_https_fmt_err_port} local0 err info
        option log-separate-errors
        mode http
        option httpslog
        error-log-format "ERROR %ci:%cp [%tr] %ft %b/%s %TR/%Tw/%Tc/%Tr/%Ta %ST %B %CC %CS %tsc %ac/%fc/%bc/%sc/%rc %sq/%bq %hr %hs %{+Q}r %[fc_err]/%[ssl_fc_err,and(proc.ssl_error_mask),hex]/%[ssl_c_err]/%[ssl_c_ca_err]/%[ssl_fc_is_resumed] %[ssl_fc_sni]/%sslv/%sslc"
        bind "${tmpdir}/https_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphers "kRSA"
        server s1 ${s1_addr}:${s1_port}

    listen logconnerror_ssl_lst
        log ${Slg_logconnerror_addr}:${Slg_logconnerror_port} local0 info
        mode http
        option httplog
        bind "${tmpdir}/logconnerror_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphers "kRSA"
        server s1 ${s1_addr}:${s1_port}


    # The following listeners allow to test backend error fetches
    listen no_backend_err_ssl_lst
        bind "${tmpdir}/no_err_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none
        server s1 ${s1_addr}:${s1_port}

    listen srv_rejected_ssl_lst
        bind "${tmpdir}/srv_rejected_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none
        server s1 ${s1_addr}:${s1_port}

    listen mismatch_fe_ssl_lst
        bind "${tmpdir}/mismatch_fe_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none
        server s1 ${s1_addr}:${s1_port}

    listen rejected_clt_ssl_lst
        bind "${tmpdir}/rejected_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-file ${testdir}/set_cafile_interCA2.crt verify required
        server s1 ${s1_addr}:${s1_port}

    listen wrong_ciphers_ssl_lst
        bind "${tmpdir}/wrong_ciphers_ssl.sock" ssl crt ${testdir}/common.pem ca-file ${testdir}/ca-auth.crt verify none force-tlsv12 ciphers "kRSA"
        server s1 ${s1_addr}:${s1_port}

.if openssl_version_atleast(1.1.1)
    listen wrong_ciphers_tls13_ssl_lst
        bind "${tmpdir}/wrong_ciphers_tls13_ssl.sock" ssl crt ${testdir}/common.pem ca-file ${testdir}/ca-auth.crt verify none force-tlsv13 ciphersuites "TLS_AES_128_GCM_SHA256"
        server s1 ${s1_addr}:${s1_port}
.endif

} -start


# The three following requests should all succeed
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

client c2 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

client c3 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run


barrier b1 sync


# Change the root CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" -
}

client c4 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c5 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c6 -connect ${h1_clearlst_sock} {
    txreq
} -run

barrier b1 sync


# Restore the root CA
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" -
}

# Change the intermediate CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA2.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" -
}

client c7 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c8 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c9 -connect ${h1_clearlst_sock} {
    txreq
} -run

barrier b1 sync


# Restore the intermediate CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" -
}

# "No shared cipher" errors
client c10 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run
client c11 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run
client c12 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run


shell {
    printf "set ssl ca-file ${testdir}/set_cafile_interCA2.crt <<\n$(cat ${testdir}/set_cafile_interCA2.crt)\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_interCA2.crt" | socat "${tmpdir}/h1/stats" -
}

client c13 -connect ${h1_backenderrorslst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run
barrier b2 sync
client c14 -connect ${h1_backenderrorslst_sock} {
    txreq
} -run
barrier b2 sync
client c15 -connect ${h1_backenderrorslst_sock} {
    txreq
} -run
barrier b2 sync
client c16 -connect ${h1_backenderrorslst_sock} {
    txreq
} -run
barrier b2 sync
client c17 -connect ${h1_backenderrorslst_sock} {
    txreq
} -run
barrier b2 sync
client c18 -connect ${h1_backenderrorslst_sock} {
    txreq
} -run

syslog Slg_cust_fmt -wait
syslog Slg_https_fmt -wait
syslog Slg_https_fmt_err -wait
syslog Slg_logconnerror -wait
syslog Slg_bcknd -wait