2021-07-30 - File descriptor migration between threads

An FD migration may happen on any idle connection that experiences a takeover()
operation by another thread. In this case the acting thread becomes the owner
of the connection (and FD) while previous one(s) need to forget about it.

File descriptor migration between threads is a fairly complex operation because
it is required to maintain a durable consistency between the pollers states and
the haproxy's desired state. Indeed, very often the FD is registered within one
thread's poller and that thread might be waiting in the system, so there is no
way to synchronously update it. This is where thread_mask, polled_mask and per
thread updates are used:

  - a thread knows if it's allowed to manipulate an FD by looking at its bit in
    the FD's thread_mask ;

  - each thread knows if it was polling an FD by looking at its bit in the
    polled_mask field ; a recent migration is usually indicated by a bit being
    present in polled_mask and absent from thread_mask.

  - other threads know whether it's safe to take over an FD by looking at the
    running mask: if it contains any other thread's bit, then other threads are
    using it and it's not safe to take it over.

  - sleeping threads are notified about the need to update their polling via
    local or global updates to the FD. Each thread has its own local update
    list and its own bit in the update_mask to know whether there are pending
    updates for it. This allows to reconverge polling with the desired state
    at the last instant before polling.

While the description above could be seen as "progressive" (it technically is)
in that there is always a transition and convergence period in a migrated FD's
life, functionally speaking it's perfectly atomic thanks to the running bit and
to the per-thread idle connections lock: no takeover is permitted without
holding the idle_conns lock, and takeover may only happen by atomically picking
a connection from the list that is also protected by this lock. In practice, an
FD is never taken over by itself, but always in the context of a connection,
and by atomically removing a connection from an idle list, it is possible to
guarantee that a connection will not be picked, hence that its FD will not be
taken over.

same thread as list!

The possible entry points to a race to use a file descriptor are the following
ones, with their respective sequences:

 1) takeover: requested by conn_backend_get() on behalf of connect_server()
    - take the idle_conns_lock, protecting against a parallel access from the
      I/O tasklet or timeout task
    - pick the first connection from the list
    - attempt an fd_takeover() on this connection's fd. Usually it works,
      unless a late wakeup of the owning thread shows up in the FD's running
      mask. The operation is performed in fd_takeover() using a DWCAS which
      tries to switch both running and thread_mask to the caller's tid_bit. A
      concurrent bit in running is enough to make it fail. This guarantees
      another thread does not wakeup from I/O in the middle of the takeover.
      In case of conflict, this FD is skipped and the attempt is tried again
      with the next connection.
    - resets the task/tasklet contexts to NULL, as a signal that they are not
      allowed to run anymore. The tasks retrieve their execution context from
      the scheduler in the arguments, but will check the tasks' context from
      the structure under the lock to detect this possible change, and abort.
    - at this point the takeover succeeded, the idle_conns_lock is released and
      the connection and its FD are now owned by the caller

  2) poll report: happens on late rx, shutdown or error on idle conns
    - fd_set_running() is called to atomically set the running_mask and check
      that the caller's tid_bit is still present in the thread_mask. Upon
      failure the caller arranges itself to stop reporting that FD (e.g. by
      immediate removal or by an asynchronous update). Upon success, it's
      guaranteed that any concurrent fd_takeover() will fail the DWCAS and that
      another connection will need to be picked instead.
    - FD's state is possibly updated
    - the iocb is called if needed (almost always)
    - if the iocb didn't kill the connection, release the bit from running_mask
      making the connection possibly available to a subsequent fd_takeover().

  3) I/O tasklet, timeout task: timeout or subscribed wakeup
    - start by taking the idle_conns_lock, ensuring no takeover() will pick the
      same connection from this point.
    - check the task/tasklet's context to verify that no recently completed
      takeover() stole the connection. If it's NULL, the connection was lost,
      the lock is released and the task/tasklet killed. Otherwise it is
      guaranteed that no other thread may use that connection (current takeover
      candidates are waiting on the lock, previous owners waking from poll()
      lost their bit in the thread_mask and will not touch the FD).
    - the connection is removed from the idle conns list. From this point on,
      no other thread will even find it there nor even try fd_takeover() on it.
    - the idle_conns_lock is now released, the connection is protected and its
      FD is not reachable by other threads anymore.
    - the task does what it has to do
    - if the connection is still usable (i.e. not upon timeout), it's inserted
      again into the idle conns list, meaning it may instantly be taken over
      by a competing thread.

  4) wake() callback: happens on last user after xfers (may free() the conn)
    - the connection is still owned by the caller, it's still subscribed to
      polling but the connection is idle thus inactive. Errors or shutdowns
      may be reported late, via sock_conn_iocb() and conn_notify_mux(), thus
      the running bit is set (i.e. a concurrent fd_takeover() will fail).
    - if the connection is in the list, the idle_conns_lock is grabbed, the
      connection is removed from the list, and the lock is released.
    - mux->wake() is called
    - if the connection previously was in the list, it's reinserted under the
      idle_conns_lock.