| /* |
| * include/types/proto_http.h |
| * This file contains HTTP protocol definitions. |
| * |
| * Copyright (C) 2000-2011 Willy Tarreau - w@1wt.eu |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation, version 2.1 |
| * exclusively. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef _TYPES_PROTO_HTTP_H |
| #define _TYPES_PROTO_HTTP_H |
| |
| #include <common/config.h> |
| |
| #include <types/buffers.h> |
| #include <types/hdr_idx.h> |
| |
| /* These are the flags that are found in txn->flags */ |
| |
| /* action flags */ |
| #define TX_CLDENY 0x00000001 /* a client header matches a deny regex */ |
| #define TX_CLALLOW 0x00000002 /* a client header matches an allow regex */ |
| #define TX_SVDENY 0x00000004 /* a server header matches a deny regex */ |
| #define TX_SVALLOW 0x00000008 /* a server header matches an allow regex */ |
| #define TX_CLTARPIT 0x00000010 /* the session is tarpitted (anti-dos) */ |
| |
| /* transaction flags dedicated to cookies : bits values 0x20 to 0x80 (0-7 shift 5) */ |
| #define TX_CK_NONE 0x00000000 /* this session had no cookie */ |
| #define TX_CK_INVALID 0x00000020 /* this session had a cookie which matches no server */ |
| #define TX_CK_DOWN 0x00000040 /* this session had cookie matching a down server */ |
| #define TX_CK_VALID 0x00000060 /* this session had cookie matching a valid server */ |
| #define TX_CK_EXPIRED 0x00000080 /* this session had an expired cookie (idle for too long) */ |
| #define TX_CK_OLD 0x000000A0 /* this session had too old a cookie (offered too long ago) */ |
| #define TX_CK_MASK 0x000000E0 /* mask to get this session's cookie flags */ |
| #define TX_CK_SHIFT 5 /* bit shift */ |
| |
| /* response cookie information, bits values 0x100 to 0x700 (0-7 shift 8) */ |
| #define TX_SCK_NONE 0x00000000 /* no cookie found in the response */ |
| #define TX_SCK_FOUND 0x00000100 /* a persistence cookie was found and forwarded */ |
| #define TX_SCK_DELETED 0x00000200 /* an existing persistence cookie was deleted */ |
| #define TX_SCK_INSERTED 0x00000300 /* a persistence cookie was inserted */ |
| #define TX_SCK_REPLACED 0x00000400 /* a persistence cookie was present and rewritten */ |
| #define TX_SCK_UPDATED 0x00000500 /* an expirable persistence cookie was updated */ |
| #define TX_SCK_MASK 0x00000700 /* mask to get the set-cookie field */ |
| #define TX_SCK_SHIFT 8 /* bit shift */ |
| |
| #define TX_SCK_PRESENT 0x00000800 /* a cookie was found in the server's response */ |
| |
| /* cacheability management, bits values 0x1000 to 0x3000 (0-3 shift 12) */ |
| #define TX_CACHEABLE 0x00001000 /* at least part of the response is cacheable */ |
| #define TX_CACHE_COOK 0x00002000 /* a cookie in the response is cacheable */ |
| #define TX_CACHE_SHIFT 12 /* bit shift */ |
| |
| /* request and response HTTP version */ |
| #define TX_REQ_VER_11 0x00004000 /* the request is HTTP/1.1 or above */ |
| #define TX_RES_VER_11 0x00008000 /* the response is HTTP/1.1 or above */ |
| |
| /* report presence of transfer-encoding:chunked and content-length headers */ |
| #define TX_REQ_CNT_LEN 0x00010000 /* content-length present in the request */ |
| #define TX_REQ_TE_CHNK 0x00020000 /* transfer-encoding: chunked present in the request */ |
| #define TX_RES_CNT_LEN 0x00040000 /* content-length present in the response */ |
| #define TX_RES_TE_CHNK 0x00080000 /* transfer-encoding: chunked present in the response */ |
| |
| /* indicate how we *want* the connection to behave, regardless of what is in |
| * the headers. We have 4 possible values right now : |
| * - WANT_TUN : will be a tunnel (default when nothing configured or with CONNECT). |
| * - WANT_KAL : try to maintain keep-alive |
| * - WANT_SCL : enforce close on the server side |
| * - WANT_CLO : enforce close on both sides |
| */ |
| #define TX_CON_WANT_TUN 0x00000000 /* note: it's important that it is 0 (init) */ |
| #define TX_CON_WANT_KAL 0x00100000 |
| #define TX_CON_WANT_SCL 0x00200000 |
| #define TX_CON_WANT_CLO 0x00300000 |
| #define TX_CON_WANT_MSK 0x00300000 /* this is the mask to get the bits */ |
| |
| #define TX_CON_CLO_SET 0x00400000 /* "connection: close" is now set */ |
| #define TX_CON_KAL_SET 0x00800000 /* "connection: keep-alive" is now set */ |
| |
| /* if either of these flags is not set, we may be forced to complete an |
| * connection as a half-way tunnel. For instance, if no content-length |
| * appears in a 1.1 response, but the request is correctly sized. |
| */ |
| #define TX_REQ_XFER_LEN 0x01000000 /* request xfer size can be determined */ |
| #define TX_RES_XFER_LEN 0x02000000 /* response xfer size can be determined */ |
| #define TX_WAIT_NEXT_RQ 0x04000000 /* waiting for the second request to start, use keep-alive timeout */ |
| |
| #define TX_HDR_CONN_PRS 0x08000000 /* "connection" header already parsed (req or res), results below */ |
| #define TX_HDR_CONN_CLO 0x10000000 /* "Connection: close" was present at least once */ |
| #define TX_HDR_CONN_KAL 0x20000000 /* "Connection: keep-alive" was present at least once */ |
| #define TX_USE_PX_CONN 0x40000000 /* Use "Proxy-Connection" instead of "Connection" */ |
| |
| /* used only for keep-alive purposes, to indicate we're on a second transaction */ |
| #define TX_NOT_FIRST 0x80000000 /* the transaction is not the first one */ |
| /* no more room for transaction flags ! */ |
| |
| /* The HTTP parser is more complex than it looks like, because we have to |
| * support multi-line headers and any number of spaces between the colon and |
| * the value. |
| * |
| * All those examples must work : |
| |
| Hdr1:val1\r\n |
| Hdr1: val1\r\n |
| Hdr1:\t val1\r\n |
| Hdr1: \r\n |
| val1\r\n |
| Hdr1:\r\n |
| val1\n |
| \tval2\r\n |
| val3\n |
| |
| * |
| */ |
| |
| /* Possible states while parsing HTTP messages (request|response) */ |
| #define HTTP_MSG_RQBEFORE 0 // request: leading LF, before start line |
| #define HTTP_MSG_RQBEFORE_CR 1 // request: leading CRLF, before start line |
| |
| /* these ones define a request start line */ |
| #define HTTP_MSG_RQMETH 2 // parsing the Method |
| #define HTTP_MSG_RQMETH_SP 3 // space(s) after the ethod |
| #define HTTP_MSG_RQURI 4 // parsing the Request URI |
| #define HTTP_MSG_RQURI_SP 5 // space(s) after the Request URI |
| #define HTTP_MSG_RQVER 6 // parsing the Request Version |
| #define HTTP_MSG_RQLINE_END 7 // end of request line (CR or LF) |
| |
| #define HTTP_MSG_RPBEFORE 8 // response: leading LF, before start line |
| #define HTTP_MSG_RPBEFORE_CR 9 // response: leading CRLF, before start line |
| |
| /* these ones define a response start line */ |
| #define HTTP_MSG_RPVER 10 // parsing the Response Version |
| #define HTTP_MSG_RPVER_SP 11 // space(s) after the Response Version |
| #define HTTP_MSG_RPCODE 12 // response code |
| #define HTTP_MSG_RPCODE_SP 13 // space(s) after the response code |
| #define HTTP_MSG_RPREASON 14 // response reason |
| #define HTTP_MSG_RPLINE_END 15 // end of response line (CR or LF) |
| |
| /* common header processing */ |
| |
| #define HTTP_MSG_HDR_FIRST 16 // waiting for first header or last CRLF (no LWS possible) |
| #define HTTP_MSG_HDR_NAME 17 // parsing header name |
| #define HTTP_MSG_HDR_COL 18 // parsing header colon |
| #define HTTP_MSG_HDR_L1_SP 19 // parsing header LWS (SP|HT) before value |
| #define HTTP_MSG_HDR_L1_LF 20 // parsing header LWS (LF) before value |
| #define HTTP_MSG_HDR_L1_LWS 21 // checking whether it's a new header or an LWS |
| #define HTTP_MSG_HDR_VAL 22 // parsing header value |
| #define HTTP_MSG_HDR_L2_LF 23 // parsing header LWS (LF) inside/after value |
| #define HTTP_MSG_HDR_L2_LWS 24 // checking whether it's a new header or an LWS |
| |
| #define HTTP_MSG_LAST_LF 25 // parsing last LF |
| |
| /* error state : must be before HTTP_MSG_BODY so that (>=BODY) always indicates |
| * that data are being processed. |
| */ |
| |
| #define HTTP_MSG_ERROR 26 // an error occurred |
| |
| /* Body processing. |
| * The state HTTP_MSG_BODY is a delimiter to know if we're waiting for headers |
| * or body. All the sub-states below also indicate we're processing the body, |
| * with some additional information. |
| */ |
| #define HTTP_MSG_BODY 27 // parsing body at end of headers |
| #define HTTP_MSG_100_SENT 28 // parsing body after a 100-Continue was sent |
| #define HTTP_MSG_CHUNK_SIZE 29 // parsing the chunk size (RFC2616 #3.6.1) |
| #define HTTP_MSG_DATA 30 // skipping data chunk / content-length data |
| #define HTTP_MSG_DATA_CRLF 31 // skipping CRLF after data chunk |
| #define HTTP_MSG_TRAILERS 32 // trailers (post-data entity headers) |
| |
| /* we enter this state when we've received the end of the current message */ |
| #define HTTP_MSG_DONE 33 // message end received, waiting for resync or close |
| #define HTTP_MSG_CLOSING 34 // shutdown_w done, not all bytes sent yet |
| #define HTTP_MSG_CLOSED 35 // shutdown_w done, all bytes sent |
| #define HTTP_MSG_TUNNEL 36 // tunneled data after DONE |
| |
| /* Redirect flags */ |
| enum { |
| REDIRECT_FLAG_NONE = 0, |
| REDIRECT_FLAG_DROP_QS = 1, /* drop query string */ |
| REDIRECT_FLAG_APPEND_SLASH = 2, /* append a slash if missing at the end */ |
| }; |
| |
| /* Redirect types (location, prefix, extended ) */ |
| enum { |
| REDIRECT_TYPE_NONE = 0, /* no redirection */ |
| REDIRECT_TYPE_LOCATION, /* location redirect */ |
| REDIRECT_TYPE_PREFIX, /* prefix redirect */ |
| }; |
| |
| /* Perist types (force-persist, ignore-persist) */ |
| enum { |
| PERSIST_TYPE_NONE = 0, /* no persistence */ |
| PERSIST_TYPE_FORCE, /* force-persist */ |
| PERSIST_TYPE_IGNORE, /* ignore-persist */ |
| }; |
| |
| /* Known HTTP methods */ |
| typedef enum { |
| HTTP_METH_NONE = 0, |
| HTTP_METH_OPTIONS, |
| HTTP_METH_GET, |
| HTTP_METH_HEAD, |
| HTTP_METH_POST, |
| HTTP_METH_PUT, |
| HTTP_METH_DELETE, |
| HTTP_METH_TRACE, |
| HTTP_METH_CONNECT, |
| HTTP_METH_OTHER, |
| } http_meth_t; |
| |
| enum { |
| HTTP_AUTH_WRONG = -1, /* missing or unknown */ |
| HTTP_AUTH_UNKNOWN = 0, |
| HTTP_AUTH_BASIC, |
| HTTP_AUTH_DIGEST, |
| }; |
| |
| enum { |
| HTTP_REQ_ACT_UNKNOWN = 0, |
| HTTP_REQ_ACT_ALLOW, |
| HTTP_REQ_ACT_DENY, |
| HTTP_REQ_ACT_HTTP_AUTH, |
| HTTP_REQ_ACT_MAX |
| }; |
| |
| /* |
| * All implemented return codes |
| */ |
| enum { |
| HTTP_ERR_200 = 0, |
| HTTP_ERR_400, |
| HTTP_ERR_403, |
| HTTP_ERR_408, |
| HTTP_ERR_500, |
| HTTP_ERR_502, |
| HTTP_ERR_503, |
| HTTP_ERR_504, |
| HTTP_ERR_SIZE |
| }; |
| |
| /* This is an HTTP message, as described in RFC2616. It can be either a request |
| * message or a response message. |
| * |
| * The values there are a little bit obscure, because their meaning can change |
| * during the parsing : |
| * |
| * - som (Start of Message) : relative offset in the buffer of first byte of |
| * the request being processed or parsed. Reset to |
| * zero during accept(), and changes while parsing |
| * chunks. |
| * - eoh (End of Headers) : relative offset in the buffer of first byte that |
| * is not part of a completely processed header. |
| * During parsing, it points to last header seen |
| * for states after START. When in HTTP_MSG_BODY, |
| * eoh points to the first byte of the last CRLF |
| * preceeding data. |
| * - col and sov : When in HTTP_MSG_BODY, will point to the first |
| * byte of data (relative to buffer). |
| * - sol (start of line) : start of line, also start of message when fully parsed. |
| * - eol (End of Line) : relative offset in the buffer of the first byte |
| * which marks the end of the line (LF or CRLF). |
| * Note that all offsets are relative to the beginning of the buffer. To get |
| * them relative to the current request, subtract ->som or ->sol. |
| */ |
| struct http_msg { |
| unsigned int msg_state; /* where we are in the current message parsing */ |
| unsigned int col, sov; /* current header: colon, start of value */ |
| unsigned int eoh; /* End Of Headers, relative to buffer */ |
| char *sol; /* start of line, also start of message when fully parsed */ |
| char *eol; /* end of line */ |
| unsigned int som; /* Start Of Message, relative to buffer */ |
| int err_pos; /* err handling: -2=block, -1=pass, 0+=detected */ |
| union { /* useful start line pointers, relative to ->sol */ |
| struct { |
| int l; /* request line length (not including CR) */ |
| int m_l; /* METHOD length (method starts at ->som) */ |
| int u, u_l; /* URI, length */ |
| int v, v_l; /* VERSION, length */ |
| } rq; /* request line : field, length */ |
| struct { |
| int l; /* status line length (not including CR) */ |
| int v_l; /* VERSION length (version starts at ->som) */ |
| int c, c_l; /* CODE, length */ |
| int r, r_l; /* REASON, length */ |
| } st; /* status line : field, length */ |
| } sl; /* start line */ |
| unsigned long long chunk_len; /* cache for last chunk size or content-length header value */ |
| unsigned long long body_len; /* total known length of the body, excluding encoding */ |
| char **cap; /* array of captured headers (may be NULL) */ |
| }; |
| |
| struct http_auth_data { |
| int method; /* one of HTTP_AUTH_* */ |
| struct chunk method_data; /* points to the creditial part from 'Authorization:' header */ |
| char *user, *pass; /* extracted username & password */ |
| }; |
| |
| struct http_req_rule { |
| struct list list; |
| struct acl_cond *cond; /* acl condition to meet */ |
| unsigned int action; |
| struct { |
| char *realm; |
| } http_auth; |
| }; |
| |
| /* This is an HTTP transaction. It contains both a request message and a |
| * response message (which can be empty). |
| */ |
| struct http_txn { |
| struct http_msg req; /* HTTP request message */ |
| struct hdr_idx hdr_idx; /* array of header indexes (max: global.tune.max_http_hdr) */ |
| unsigned int flags; /* transaction flags */ |
| http_meth_t meth; /* HTTP method */ |
| |
| int status; /* HTTP status from the server, negative if from proxy */ |
| struct http_msg rsp; /* HTTP response message */ |
| |
| char *uri; /* first line if log needed, NULL otherwise */ |
| char *cli_cookie; /* cookie presented by the client, in capture mode */ |
| char *srv_cookie; /* cookie presented by the server, in capture mode */ |
| char *sessid; /* the appsession id, if found in the request or in the response */ |
| int cookie_first_date; /* if non-zero, first date the expirable cookie was set/seen */ |
| int cookie_last_date; /* if non-zero, last date the expirable cookie was set/seen */ |
| |
| struct http_auth_data auth; /* HTTP auth data */ |
| }; |
| |
| /* This structure is used by http_find_header() to return values of headers. |
| * The header starts at <line>, the value (excluding leading and trailing white |
| * spaces) at <line>+<val> for <vlen> bytes, followed by optional <tws> trailing |
| * white spaces, and sets <line>+<del> to point to the last delimitor (colon or |
| * comma) before this value. <prev> points to the index of the header whose next |
| * is this one. |
| */ |
| struct hdr_ctx { |
| char *line; |
| int idx; |
| int val; /* relative to line, may skip some leading white spaces */ |
| int vlen; /* relative to line+val, stops before trailing white spaces */ |
| int tws; /* added to vlen if some trailing white spaces are present */ |
| int del; /* relative to line */ |
| int prev; /* index of previous header */ |
| }; |
| |
| #endif /* _TYPES_PROTO_HTTP_H */ |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |