1. baf5b52 clk: at91: sam9x60: add support compatible with CCF by Claudiu Beznea · Wed Oct 07 18:17:08 2020 +0300
  2. ba26a20 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · Fri Oct 16 09:56:15 2020 -0400
  3. e8433bf usb: dwc3: Include device_compat.h in dwc3-octeon-glue.c by Tom Rini · Fri Oct 16 08:41:37 2020 -0400
  4. 51f27a8 clk: at91: Include device_compat.h in compat.c by Tom Rini · Thu Oct 15 21:44:43 2020 -0400
  5. aa7ebbb usb: musb-new: mt85xx: Fix not calling dev_err with a device by Sean Anderson · Sun Oct 04 21:39:55 2020 -0400
  6. 3e46486 usb: musb-new: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:54 2020 -0400
  7. 429ce52 usb: xhci: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:53 2020 -0400
  8. d111306 timer: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:52 2020 -0400
  9. 4736416 tee: optee: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:51 2020 -0400
  10. a89b943 spi: fsl_qspi: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:50 2020 -0400
  11. acccaca spi: nxp_fspi: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:49 2020 -0400
  12. baba248 watchdog: octeontx_wdt: Add support for start and stop by Suneel Garapati · Wed Sep 23 11:01:31 2020 +0200
  13. 8f0f949 mmc: octeontx_hsmmc.c: Remove test debug message by Stefan Roese · Wed Sep 23 11:01:29 2020 +0200
  14. bea4632 spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2 by Stefan Roese · Wed Aug 05 15:07:30 2020 +0200
  15. 9edf909 ram: imxrt: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:48 2020 -0400
  16. 03036a2 phy: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:47 2020 -0400
  17. eba9951 net: ldpaa_eth: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:46 2020 -0400
  18. 0a74944 mtd: mxs_nand: Fix not calling dev_xxx with a device by Sean Anderson · Sun Oct 04 21:39:45 2020 -0400
  19. 31786fe firmware: scmi: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:44 2020 -0400
  20. 02a8f6d dm: syscon: Set LOG_CATEGORY by Sean Anderson · Sun Oct 04 21:39:43 2020 -0400
  21. 1f4d206 clk: sifive: Include device_compat.h by Sean Anderson · Sun Oct 04 21:39:42 2020 -0400
  22. 53a55a1 Merge tag 'mmc-2020-10-14' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc by Tom Rini · Thu Oct 15 08:20:42 2020 -0400
  23. 344a33b Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · Wed Oct 14 13:51:56 2020 -0400
  24. 7c7b3c9 net: e1000: add defaults for i210 TX/RX PBSIZE by Christian Gmeiner · Tue Oct 06 16:08:35 2020 +0200
  25. 5de2f33 treewide: Fix wrong CONFIG_IS_ENABLED() handling by Alper Nebi Yasak · Mon Oct 05 09:57:29 2020 +0300
  26. 49fee03 mmc: remove duplicate mmc_get_env_dev() implementations by David Woodhouse · Tue Aug 04 10:05:46 2020 +0100
  27. 5355be6 drivers: gpio: keep output value for input on sandbox by Heinrich Schuchardt · Mon Sep 14 12:50:55 2020 +0200
  28. 081d401 mmc: fsl_esdhc: add ADMA2 support by Michael Walle · Mon Oct 12 10:07:14 2020 +0200
  29. bc9e13e mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED() by Michael Walle · Mon Oct 12 10:07:13 2020 +0200
  30. e286380 spi: mvebu_a3700_spi: add support for cs-gpios by George Hilliard · Wed Sep 30 09:28:21 2020 -0500
  31. 8666ae8 net: Add NIC controller driver for OcteonTX2 by Suneel Garapati · Wed Aug 26 14:37:42 2020 +0200
  32. 53dc448 net: Add NIC controller driver for OcteonTX by Suneel Garapati · Wed Aug 26 14:37:33 2020 +0200
  33. 9de7d2b mtd: nand: Add NAND controller driver for OcteonTX by Suneel Garapati · Wed Aug 26 14:37:22 2020 +0200
  34. 8dcfee9 Merge branch 'for-next' of https://github.com/lftan/u-boot by Tom Rini · Mon Oct 12 07:55:17 2020 -0400
  35. 554c624 Merge tag 'ti-v2021.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti by Tom Rini · Mon Oct 12 07:26:57 2020 -0400
  36. 920f5d0 mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_write32 by Haibo Chen · Wed Sep 30 15:52:23 2020 +0800
  37. 0ff50c9 mmc: do not check argument of free() beforehand by Heinrich Schuchardt · Tue Sep 29 21:48:08 2020 +0200
  38. 02016c6 mmc: sdhci: move the ADMA2 table handling into own module by Michael Walle · Wed Sep 23 12:42:51 2020 +0200
  39. bdd413f mmc: fsl_esdhc: simplify esdhc_setup_data() by Michael Walle · Wed Sep 23 12:42:49 2020 +0200
  40. c9bba2e mmc: fsl_esdhc: use dma-mapping API by Michael Walle · Wed Sep 23 12:42:48 2020 +0200
  41. 4ff0c69 mmc: fsl_esdhc: simplify 64bit check for SDMA transfers by Michael Walle · Wed Sep 23 12:42:47 2020 +0200
  42. c2700de mmc: fsl_esdhc_imx: remove the 1ms delay before sending command by Haibo Chen · Tue Sep 22 18:11:43 2020 +0800
  43. d8de5e4 mmc: do not send cmd13 if the parameter 'send_status' is 0 for __mmc_switch by Haibo Chen · Tue Sep 22 18:11:42 2020 +0800
  44. 9ac60a4 mmc: fsl_esdhc: fix eMMC HS400 stability issue by Yangbo Lu · Tue Sep 01 16:58:07 2020 +0800
  45. dd08eea mmc: fsl_esdhc: fix mmc->clock with actual clock by Yangbo Lu · Tue Sep 01 16:58:06 2020 +0800
  46. 8f9ace1 mmc: fsl_esdhc: support eMMC HS400 mode by Yangbo Lu · Tue Sep 01 16:58:05 2020 +0800
  47. 5347aea mmc: add a mmc_hs400_prepare_ddr() interface by Yangbo Lu · Tue Sep 01 16:58:04 2020 +0800
  48. 3ed53ac mmc: add a hs400_tuning flag by Yangbo Lu · Tue Sep 01 16:58:03 2020 +0800
  49. 573859c mmc: fsl_esdhc: clean TBCTL[TB_EN] manually during init by Yangbo Lu · Tue Sep 01 16:58:02 2020 +0800
  50. 73da9c8 mmc: fsl_esdhc: support tuning for eMMC HS200 by Yangbo Lu · Tue Sep 01 16:58:01 2020 +0800
  51. 76c7469 mmc: fsl_esdhc: add a reinit() callback by Yangbo Lu · Tue Sep 01 16:58:00 2020 +0800
  52. c46f5d7 mmc: add a reinit() API by Yangbo Lu · Tue Sep 01 16:57:59 2020 +0800
  53. 55c5ff5 phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property by Vignesh Raghavendra · Thu Oct 08 14:58:38 2020 +0530
  54. be7bdcc dma: ti: k3-udma: Reset the channel during release by Vignesh Raghavendra · Thu Sep 17 20:11:22 2020 +0530
  55. 5f78ee7 Kconfig: Move BOUNCE_BUFFER under driver options by Simon Glass · Thu Sep 10 20:21:25 2020 -0600
  56. 89ac34d arm: socfpga: agilex: Enable FPGA Full Reconfiguration support by Chee Hong Ang · Fri Aug 07 11:50:05 2020 +0800
  57. 4e87fcd fpga: intel_sdm_mb: Add watchdog reset by Chee Hong Ang · Fri Aug 07 11:50:04 2020 +0800
  58. 1419245 fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox by Chee Hong Ang · Fri Aug 07 11:50:03 2020 +0800
  59. 3f78b53 sysreset: socfpga: agilex: Enable sysreset support by Chee Hong Ang · Wed Aug 05 20:11:26 2020 +0800
  60. 673e98e sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64 by Chee Hong Ang · Wed Aug 05 20:11:25 2020 +0800
  61. 9579301 clk: agilex: Additional membus writes for HPS PLL by Chee Hong Ang · Fri Jul 10 20:55:23 2020 +0800
  62. 2d94ee6 clk: agilex: Handle clock configuration differently in SPL and U-Boot proper by Chee Hong Ang · Fri Jul 10 20:55:22 2020 +0800
  63. 7609220 clk: agilex: Add clock enable support by Ley Foon Tan · Fri Jul 10 20:55:21 2020 +0800
  64. f94b0fd clk: agilex: Add NAND clock support by Ley Foon Tan · Fri Jul 10 20:55:20 2020 +0800
  65. f23419c wdt: designware: fix timeout calculation due to expecting KHz by Jack Mitchell · Thu Sep 17 10:30:40 2020 +0100
  66. 9476963 led: gpio: Default to using node name if label is absent by Sean Anderson · Mon Sep 14 11:02:02 2020 -0400
  67. ccca40b gpio: dw: Return output value when direction is out by Sean Anderson · Mon Sep 14 11:02:01 2020 -0400
  68. 2fb5b78 gpio: dw: Add a trailing underscore to generated name by Sean Anderson · Mon Sep 14 11:02:00 2020 -0400
  69. 2f3c335 gpio: dw: Fix warnings about casting int to pointer by Sean Anderson · Mon Sep 14 11:01:59 2020 -0400
  70. 087dfce pinctrl: Add support for Kendryte K210 FPIOA by Sean Anderson · Mon Sep 14 11:01:58 2020 -0400
  71. 3438e3b test: pinmux: Add test for pin muxing by Sean Anderson · Mon Sep 14 11:01:57 2020 -0400
  72. 319ca70 pinctrl: Add pinmux property support to pinctrl-generic by Sean Anderson · Mon Sep 14 11:01:55 2020 -0400
  73. f7d8f83 ram: add ddr4 dual x8 configuration by Dylan Hung · Mon Sep 07 16:25:07 2020 +0800
  74. 58adc73 ram: move aspeed ram driver into drivers/ directory by Dylan Hung · Mon Sep 07 16:25:06 2020 +0800
  75. 23915fa Merge https://gitlab.denx.de/u-boot/custodians/u-boot-cfi-flash by Tom Rini · Thu Oct 08 10:20:53 2020 -0400
  76. b2bb1b3 cfi_flash: Fix devicetree address determination by Andre Przywara · Thu Sep 24 00:22:04 2020 +0100
  77. faa3fee mtd: cfi_mtd: Use DMA for reads by Vignesh Raghavendra · Thu Sep 17 16:53:08 2020 +0530
  78. 518d924 dma: Reduce error level when DMA channel type does not exist by Vignesh Raghavendra · Thu Sep 17 16:53:07 2020 +0530
  79. 2013b66 Merge tag 'mips-pull-2020-10-07' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips by Tom Rini · Wed Oct 07 17:25:25 2020 -0400
  80. df33b57 usb: xhci: octeon: Add DWC3 glue layer for Octeon by Stefan Roese · Mon Aug 24 13:04:38 2020 +0200
  81. 79db944 usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses by Stefan Roese · Mon Aug 24 13:04:37 2020 +0200
  82. cf35437 usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr() by Stefan Roese · Mon Aug 24 13:04:36 2020 +0200
  83. efa73a9 ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3) by Aaron Williams · Wed Sep 02 08:29:08 2020 +0200
  84. e60c6a7 ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3) by Aaron Williams · Wed Sep 02 08:29:07 2020 +0200
  85. 0111421 ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3) by Aaron Williams · Wed Sep 02 08:29:06 2020 +0200
  86. bd81c5b Merge tag 'dm-pull-6oct20' of git://git.denx.de/u-boot-dm by Tom Rini · Tue Oct 06 13:59:01 2020 -0400
  87. d776a84 dm: add cells_count parameter in *_count_phandle_with_args by Patrick Delaunay · Fri Sep 25 09:41:14 2020 +0200
  88. 60d6b5d Merge tag 'u-boot-amlogic-20201005' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · Tue Oct 06 08:36:10 2020 -0400
  89. 38ae92e Merge branch 'next' by Tom Rini · Mon Oct 05 13:05:46 2020 -0400
  90. da7f09c pwm: Add driver for Amlogic Meson PWM controller by Neil Armstrong · Thu Oct 01 10:04:56 2020 +0200
  91. 6e2d447 pinctrl: meson-axg: add missing GPIOA_18 by Neil Armstrong · Fri Oct 02 09:32:12 2020 +0200
  92. 135bd3e pinctrl: meson-axg-pmx: fix gpio request by Neil Armstrong · Fri Oct 02 09:31:46 2020 +0200
  93. c90263c phy: meson-gxl-usb: depend on Meson AXG aswell by Neil Armstrong · Thu Sep 10 10:48:16 2020 +0200
  94. d08ce85 phy: meson-gxl: remove invalid USB3 PHY driver by Neil Armstrong · Thu Sep 10 10:48:15 2020 +0200
  95. c1a7e72c usb: dwc3: add Amlogic GXL & GXL DWC3 Glue by Neil Armstrong · Thu Sep 10 10:48:13 2020 +0200
  96. 2a8bc03 Merge tag 'u-boot-atmel-2021.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel into next by Tom Rini · Mon Oct 05 10:54:27 2020 -0400
  97. 8ac4a89 Merge tag 'u-boot-stm32-20201003' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm into next by Tom Rini · Mon Oct 05 10:54:10 2020 -0400
  98. 929f5cc cpu: at91: add driver for CPU by Claudiu Beznea · Thu Oct 01 13:27:25 2020 +0300
  99. eb6355c pinctrl: bcm283x: Store the return value of dev_read_u32_default to int by Ovidiu Panait · Tue Sep 29 20:27:13 2020 +0300
  100. 44d0c63 pinctrl: bcm283x: Read address from DT in ofdata_to_platdata by Ovidiu Panait · Tue Sep 29 20:27:12 2020 +0300