Gitiles
Code Review
Sign In
git01.mediatek.com
/
filogic
/
uboot
/
b47bc37d2cba5bd4b3aeb7d9c6b37c1e7269bc9d
/
configs
b47bc37
ARM: rmobile: Add R8A77970 V3M Eagle board
by Marek Vasut
· Mon Oct 09 21:08:10 2017 +0200
e557a8d
Merge git://git.denx.de/u-boot-fsl-qoriq
by Tom Rini
· Thu Dec 07 17:56:51 2017 -0500
045e0e2
log: sandbox: Enable logging
by Simon Glass
· Mon Dec 04 13:48:29 2017 -0700
9e940b1
sandbox: Adjust pre-console address to avoid conflict
by Simon Glass
· Mon Dec 04 13:48:18 2017 -0700
ae1eade
armv8: LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.
by Udit Agarwal
· Wed Nov 22 09:02:07 2017 +0530
acf154d
armv8: LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.
by Udit Agarwal
· Wed Nov 22 09:01:27 2017 +0530
5f6a427
armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig
by Ashish Kumar
· Thu Nov 23 14:33:49 2017 +0530
f6438a8
omap3: evm: Explicitly use DISTRO_DEFAULTS features at startup
by Derald D. Woods
· Wed Nov 29 03:28:55 2017 +0000
8b24569
ARM: arch-meson: build memory banks using reported memory from registers
by Neil Armstrong
· Mon Nov 27 10:35:46 2017 +0100
83256d8
arm: Add Khadas VIM support based on Meson GXL family
by Neil Armstrong
· Mon Nov 27 10:16:20 2017 +0100
514ad81
arm: Add LibreTech CC support based on Meson GXL family
by Neil Armstrong
· Mon Nov 27 10:16:19 2017 +0100
3f88741
add support for Raspberry Pi Zero W
by Dmitry Korunov
· Sun Nov 26 13:38:53 2017 +0400
be71f43
rockchip: rk3128: add defconfig for evb-rk3128
by Kever Yang
· Tue Nov 28 16:04:20 2017 +0800
e80851a
Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh
by Tom Rini
· Thu Nov 30 10:39:04 2017 -0500
24f2a92
Merge git://git.denx.de/u-boot-x86
by Tom Rini
· Thu Nov 30 10:37:43 2017 -0500
901897b
ARM: rmobile: Rework the ULCB CPLD driver
by Marek Vasut
· Sun Nov 26 20:32:44 2017 +0100
4947772
x86: conga-qeval20-qa3-e3845: Adjust VGA rom address
by Anatolij Gustschin
· Fri Nov 17 02:29:59 2017 +0100
44b7fc8
board: laird: add WB50N CPU module
by Ben Whitten
· Thu Nov 23 13:47:48 2017 +0000
7b8f9af
board: laird: add WB45N CPU module
by Ben Whitten
· Thu Nov 23 13:47:47 2017 +0000
1240d88
board: atmel: add sama5d2_ptc_ek board
by Ludovic Desroches
· Fri Nov 17 14:57:12 2017 +0800
75e5969
configs: stm32f746-disco: enable MISC/DM_RESET/STM32_RESET and STM32_RCC
by Patrice Chotard
· Wed Nov 15 13:14:50 2017 +0100
55f51d9
nds32: board: Support ftsdc010 DM.
by Rick Chen
· Mon Aug 28 16:17:13 2017 +0800
6ae5ac4
spi: nds_ae3xx: Rename nds_ae3xx_spi as atcspi200_spi
by Rick Chen
· Thu Nov 23 14:19:36 2017 +0800
af0861e
ae3xx: timer: Rename AE3XX to ATCPIT100
by Rick Chen
· Tue Nov 28 09:23:23 2017 +0800
c00ab67
ARM: rmobile: Migrate boards to RCar IIC drivers
by Marek Vasut
· Mon Nov 27 07:36:22 2017 +0100
3e40895
ARM: rmobile: Use PRR driver on all Gen3 boards
by Marek Vasut
· Thu Nov 09 21:56:01 2017 +0100
fc52153
ARM: rmobile: Enable xHCI on RCar Gen3 boards
by Marek Vasut
· Sun Sep 10 12:33:11 2017 +0200
cd942d4
ARM: rmobile: Remove CONFIG_CMD_SDRAM from Salvator-X
by Marek Vasut
· Tue Nov 28 08:20:34 2017 +0100
c67e60c
ARM: rmobile: Enable Micrel KSZ90x1 PHY driver on ULCB
by Marek Vasut
· Sun Nov 26 20:59:23 2017 +0100
0eb6ce0
Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze
by Tom Rini
· Wed Nov 29 08:26:07 2017 -0500
24b1758
arm: zynq: Enable debug uart on zc706
by Michal Simek
· Fri Nov 10 09:26:40 2017 +0100
1493190
ARM: uniphier: set CONFIG_LOGLEVEL to 6
by Masahiro Yamada
· Sat Nov 25 00:25:31 2017 +0900
b6edfaf
ARM: openrd: set CONFIG_LOGLEVEL to 2
by Masahiro Yamada
· Tue Nov 28 21:23:20 2017 +0900
37444ea
arm64: zynqmp: Add revision to identification string
by Michal Simek
· Wed Nov 08 15:48:57 2017 +0100
c9ce08d
arm64: zynqmp: Add support for zcu102 1.0 rev
by Michal Simek
· Thu Nov 02 11:42:12 2017 +0100
be2b844
arm64: zynqmp: Enable debug uart for zc1751 dc5
by Michal Simek
· Tue Oct 31 14:23:27 2017 +0100
a4ad96e
arm: zynq: Add mini u-boot configuration for zynq
by Michal Simek
· Thu Nov 02 10:54:48 2017 +0100
ab75453
arm: zynq: Move ZYNQ_SERIAL to Kconfig
by Michal Simek
· Mon Nov 06 09:16:05 2017 +0100
216f637
arm: zynq: Enable FPGA/FPGA_XILINX via Kconfig
by Michal Simek
· Fri Nov 03 15:53:56 2017 +0100
9e996ec
arm: zynq: Add board support for cc108
by Michal Simek
· Thu Nov 02 09:18:42 2017 +0100
4d2b32d
arm: zynq: Enable qspi for zc770_xm013
by Michal Simek
· Thu Nov 02 10:46:15 2017 +0100
27ebfbd
arm: zynq: Enable MACRONIX flash for zc702/zc706/zc770 xm010
by Michal Simek
· Thu Nov 02 10:44:48 2017 +0100
8691e81
arm: zynq: Enable debug console on zc770 xm010 by default
by Michal Simek
· Thu Nov 02 10:40:57 2017 +0100
12e30a6
arm: zynq: Enable bootz command for Xilinx platforms
by Michal Simek
· Thu Nov 02 10:38:16 2017 +0100
91d024c
arm: zynq: Add support for SYZYGY Hub board
by Tom McLeod
· Wed Sep 27 17:53:26 2017 -0700
386902a
spl: TI: Do not default to SPL_FIT_IMAGE_TINY being enabled
by Tom Rini
· Mon Nov 27 20:07:47 2017 -0500
d037d5b
Merge git://www.denx.de/git/u-boot-imx
by Tom Rini
· Mon Nov 27 07:22:11 2017 -0500
48cd900
configs: icore-rqs: Enable falcon mode
by Jagan Teki
· Tue Nov 21 00:02:18 2017 +0530
515bd00
i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
by Jagan Teki
· Tue Nov 21 00:02:16 2017 +0530
fbd71f8
i.MX6UL: icore: Add SPL_OF_CONTROL support
by Jagan Teki
· Tue Nov 21 00:02:14 2017 +0530
dc9de73
i.MX6Q: icore: Add SPL_OF_CONTROL support
by Jagan Teki
· Tue Nov 21 00:02:12 2017 +0530
ad4504e
mx6sxsabresd: Use PARTUUID to specify the rootfs location
by Fabio Estevam
· Wed Nov 22 11:15:28 2017 -0200
7427c39
rockchip: defconfig: puma-rk3399: bypass ADC-based boot_mode check
by Philipp Tomsich
· Fri Nov 24 14:44:59 2017 +0100
aeb816e
rockchip: defconfig: lion-rk3368: sync up with SPL changes for ATF
by Philipp Tomsich
· Wed Sep 13 21:29:43 2017 +0200
f941373
rockchip: defconfig: puma-rk3399: sync up with SPL changes for ATF
by Philipp Tomsich
· Wed Sep 13 21:29:42 2017 +0200
2641902
rockchip: defconfig: firefly-rk3399: sync up with SPL changes for ATF
by Philipp Tomsich
· Wed Sep 13 21:29:39 2017 +0200
1a92ace
TI: am57xx; Remove am57xx_evm_nodt_defconfig
by Tom Rini
· Tue Nov 21 07:47:17 2017 -0500
1000422
odroid-c2: enable I2C
by Beniamino Galvani
· Sun Oct 29 10:09:01 2017 +0100
3dfa759
mx6sabreauto: Remove unneeded SPL selection
by Fabio Estevam
· Wed Nov 15 17:04:04 2017 -0200
bf8e727
mx6: Select MX6QDL option via Kconfig
by Fabio Estevam
· Wed Nov 15 17:04:03 2017 -0200
56d9692
mx53: Add Board support for GE PPD
by Peter Senna Tschudin
· Mon Nov 06 19:14:11 2017 +0000
57e486e
pico-imx6ul: Add function to create gpt partitions
by Fabio Berton
· Thu Nov 16 09:59:48 2017 -0200
a2b0eee
pico-imx6ul: Use PARTUUID to specify the rootfs location
by Fabio Berton
· Thu Nov 16 09:59:45 2017 -0200
80d51a4
Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND
by Tom Rini
· Mon Nov 06 18:15:11 2017 -0500
75a86e3
configs: dragonboard410c: Save environment data on eMMC
by Jorge Ramirez-Ortiz
· Mon Nov 06 14:16:38 2017 +0100
24e2ca7
arm: amlogic: p212: Add support for Ethernet with Internal PHY
by Neil Armstrong
· Wed Oct 18 10:02:12 2017 +0200
4c2ea41
arm: add initial support for Amlogic P212 based on Meson GXL family
by Neil Armstrong
· Thu Oct 12 15:50:32 2017 +0200
67cb375
Merge git://www.denx.de/git/u-boot-marvell
by Tom Rini
· Thu Nov 16 09:32:04 2017 -0500
5b28e59
arm: mvebu: clearfog: Fix SPI-NOR flash access
by Jon Nettleton
· Mon Nov 13 07:04:30 2017 +0200
31c0d3b
arm: mvebu: clearfog: enable XHCI USB
by Jon Nettleton
· Mon Nov 06 10:33:21 2017 +0200
1902420
arm: mvebu: configs: Enable DISTRO_DEFAULTS for MACCHIATObin
by Heinrich Schuchardt
· Sun Oct 15 07:03:40 2017 +0200
ee2a860
arm: mvebu: theadorable_debug_defconfig: Enable setexpr command
by Stefan Roese
· Fri Oct 06 09:11:38 2017 +0200
2e1fcf3
armv8: ls1088ardb: Add distro boot support
by Ashish Kumar
· Mon Nov 06 13:19:28 2017 +0530
4feb83b
armv8: ls1088aqds: Add SD boot support for ls1088qds
by Ashish Kumar
· Mon Nov 06 13:18:44 2017 +0530
5676ceb
armv8: ls1088ardb: Add SD boot support for ls1088
by Ashish Kumar
· Mon Nov 06 13:18:43 2017 +0530
6a26127
armv8: ls1088a: Move CONFIG_SPI_FLASH_SPANSION to defconfig
by Ashish Kumar
· Mon Oct 30 11:54:52 2017 +0530
c44befc
board: sysam: stmark2: add missing environment location
by Angelo Dureghello
· Thu Nov 02 20:54:59 2017 +0100
72f5731
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
by Tom Rini
· Thu Nov 09 08:11:30 2017 -0500
ce86bf9
imx:display5: Add support for LWN's DISPLAY5 board
by Lukasz Majewski
· Tue Oct 31 17:58:05 2017 +0100
52b2f45
mx25: Move MX25 selection to Kconfig
by Fabio Estevam
· Fri Nov 03 13:40:08 2017 -0200
4517c8d
rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfig
by Kever Yang
· Thu Nov 02 15:16:36 2017 +0800
5ad8e11
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT
by Tom Rini
· Sun Oct 22 17:55:07 2017 -0400
4eff222
rockchip: lion-rk3368: defconfig: select PHY_MICREL_KSZ90X1
by Philipp Tomsich
· Mon Oct 30 14:44:54 2017 +0100
8732115
rockchip: puma-rk3399: defconfig: select PHY_MICREL_KSZ90X1
by Philipp Tomsich
· Mon Oct 30 14:44:55 2017 +0100
8eab9f6
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
by Tom Rini
· Tue Oct 31 08:14:53 2017 -0400
861b689
ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDK
by Marek Vasut
· Sun Oct 22 10:22:40 2017 +0200
836d067
mx6slevk: Fix MMC breakage for the SPL target
by Fabio Estevam
· Fri Oct 13 10:27:26 2017 -0300
f0a4d32
imx: Fix regression with CONFIG_DM_MMC=y
by Fabio Estevam
· Fri Oct 20 12:17:03 2017 -0200
e983692
configs: Resync with savedefconfig
by Tom Rini
· Mon Oct 30 12:58:33 2017 -0400
89cfa89
Merge git://git.denx.de/u-boot-fsl-qoriq
by Tom Rini
· Fri Oct 27 21:59:10 2017 -0400
6f22aba
armv8: ls1088aqds: Enable USB command on QDS for qspi-boot
by Ran Wang
· Mon Oct 23 10:09:25 2017 +0800
9a43a6c
armv8: ls1088ardb: Enable USB command RDB qspi-boot
by Ran Wang
· Mon Oct 23 10:09:24 2017 +0800
5dc8514
armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH to defconfig
by Ashish Kumar
· Wed Oct 11 18:37:42 2017 +0530
4e5673d
Merge git://git.denx.de/u-boot-x86
by Tom Rini
· Fri Oct 27 08:50:16 2017 -0400
99e871f
x86: galileo: Fix boot failure
by Bin Meng
· Wed Oct 18 18:20:52 2017 -0700
7ca2939
sunxi: Add support for the Banana Pi M2-Magic
by Maxime Ripard
· Thu Apr 20 13:16:18 2017 +0200
369ece7
SPL: SPI: select SPL_SPI_FLASH_SUPPORT on SPL_SPI_SUNXI
by Andre Przywara
· Thu Oct 05 00:27:21 2017 +0100
49bc147
chiliboard config: use CONFIG_DEFAULT_FDT_FILE as env variable
by Michal Oleszczyk
· Tue Oct 17 14:06:33 2017 +0200
6952105
ARM: uniphier: enable DWC3 xHCI driver really
by Masahiro Yamada
· Tue Oct 17 21:19:40 2017 +0900
2218606
uniphier_ld4_sld8: Re-add SMC911X_BASE address
by Tom Rini
· Sat Oct 21 10:26:34 2017 -0400
Next »