- a253c3b net: phy: Add new read ethernet phy id function by Michal Simek · 2 years, 9 months ago
- 19497b4 i2c: i2c-cdns: Prevent early termination of write by Sai Pavan Boddu · 2 years, 9 months ago
- 252b4a3 i2c: i2c-cdns: Fix write transaction state by Sai Pavan Boddu · 2 years, 9 months ago
- bdeeb2b i2c: i2c-cdns: Start read transaction after write to transfer_size reg by Sai Pavan Boddu · 2 years, 9 months ago
- 113ca2e dma: xilinx: Add Display Port DMA driver by Michal Simek · 2 years, 9 months ago
- ab2829a video: Add skeleton driver for ZynqMP Display port driver by Michal Simek · 2 years, 9 months ago
- ca7d847 mmc: zynq_sdhci: Add support for dynamic configuration by Ashok Reddy Soma · 2 years, 9 months ago
- 87cdd35 firmware: zynqmp: Add support for set sd config and is function supported by Ashok Reddy Soma · 2 years, 9 months ago
- f0a6a32 power: zynqmp: Use zynqmp_pmufw_node() from firmware by Michal Simek · 2 years, 9 months ago
- 64fa3e8 gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander by T Karthik Reddy · 2 years, 9 months ago
- 6556bff mmc: zynq_sdhci: Enable card detect workaround for ZynqMP by Ashok Reddy Soma · 2 years, 9 months ago
- dd74577 mmc: zynq_sdhci: Change granularity of timeout to 1us by Ashok Reddy Soma · 2 years, 9 months ago
- 09f3890 mmc: zynq_sdhci: Fix timeout issue by Ashok Reddy Soma · 2 years, 9 months ago
- 3ba1508 mtd: nand: Update driver to match new DT binding by Michal Simek · 2 years, 9 months ago
- 5402160 arm64: a37xx: pinctrl: Fix PWM pins indexes by Marek Behún · 2 years, 9 months ago
- 733b244 drivers: rtc: fix null pointer access in armada38x_rtc_reset by Francois Berder · 2 years, 9 months ago
- 1307917 pci: pci_mvebu: Cleanup macro names by Pali Rohár · 2 years, 9 months ago
- 919199c pci: pci_mvebu: Remove unused SELECT and lane_mask by Pali Rohár · 2 years, 9 months ago
- 9ccd7a4 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 2 years, 9 months ago
- b8a2b00 phy: nop-phy: Fix phy reset if no reset-gpio defined by Tim Harvey · 2 years, 9 months ago
- c66c256 gpio: add sl28cpld driver by Michael Walle · 2 years, 9 months ago
- fa84201 watchdog: add sl28cpld watchdog driver by Michael Walle · 3 years ago
- 2184cc6 misc: add sl28cpld base driver by Michael Walle · 2 years, 9 months ago
- 2541837 net: ravb: Add tx/rx delay flag checks and support for rgmii-rxid by Adam Ford · 2 years, 9 months ago
- db9b1a1 clk: ccf: correct the test on the parent uclass in clk_enable/clk_disable by Patrick Delaunay · 2 years, 10 months ago
- e1c56f3 clk: Add clk_get_by_name_optional by Sean Anderson · 2 years, 10 months ago
- 0d69d06 clk: Inline clk_get_*_optional by Sean Anderson · 3 years ago
- d7e85d5 clk: Rename clk_get_optional_nodev by Sean Anderson · 3 years ago
- ffc0759 clk: cdce9xx: Convert .of_xlate to .request by Sean Anderson · 3 years ago
- 0afb933 clk: versaclock: Remove xlate function by Sean Anderson · 3 years ago
- cfc77ff clk: Remove no-op request and rfree callbacks by Sean Anderson · 3 years ago
- 35b3754 clk: Rename ICS8N3QV01 to CLK_ICS8N3QV01 by Sean Anderson · 3 years ago
- d1f48b5 clk: Alphabetize Kconfig by Sean Anderson · 3 years ago
- 5eafaa6 clk: Alphabetize Makefile by Sean Anderson · 3 years ago
- 03722cf Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb by Tom Rini · 2 years, 9 months ago
- 4b5f228 usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig by Adam Ford · 2 years, 9 months ago
- d9f8064 usb: ehci-omap: Use PHY system to manage phy resets by Adam Ford · 2 years, 9 months ago
- cb9a356 usb: ehci-omap: Make Kconfig select PHY if USB_EHCI_OMAP by Adam Ford · 2 years, 9 months ago
- 35b82a8 phy: nop-phy: Fix enabling reset by Adam Ford · 2 years, 9 months ago
- 3ca17c4 usb: ehci-omap: Move omap_ehci_hcd_init to omap_ehci_probe by Adam Ford · 2 years, 9 months ago
- 7fc3cce usb: ehci-omap: Drop dead code by Adam Ford · 2 years, 9 months ago
- 3365fd3 phy: phy-uclass: check the parents for phys by Angus Ainslie · 2 years, 10 months ago
- 31dc9cc Merge branch '2022-02-21-platform-updates' by Tom Rini · 2 years, 9 months ago
- 83f3f8b ti: i2c: fix probe_chip() return value by Nikita Yushchenko · 2 years, 9 months ago
- fdee97d crypto: aspeed: fix polling RSA status wrong issue by Neal Liu · 2 years, 9 months ago
- 622a058 iommu: Add M1 Pro/Max support to Apple DART driver by Janne Grunau · 2 years, 10 months ago
- 4a4ac0d Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 9 months ago
- 8be0ba3 mmc: fsl_esdhc_imx: correct the actual card clock by Haibo Chen · 2 years, 10 months ago
- 84516a7 mmc: fsl_esdhc_imx: remove redundant ARCH_MXC by Haibo Chen · 2 years, 10 months ago
- 4a756dc clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imx8mn by Heiko Thiery · 2 years, 10 months ago
- 97497fd mmc: fsl_esdhc_imx: Use esdhc_soc_data flags to set host caps by Adam Ford · 2 years, 11 months ago
- 427104d Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 9 months ago
- 532b719 ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision by Marek Behún · 2 years, 9 months ago
- 0ef7905 pci: mvebu: Ensure that root port is always on root zero bus by Pali Rohár · 2 years, 9 months ago
- 4d73e81 arm: a37xx: pci: Update comment about Command/Direct mode by Pali Rohár · 2 years, 9 months ago
- 1efa134 arm: a37xx: pci: Register controller also when no PCIe card is connected by Pali Rohár · 2 years, 9 months ago
- 4106305 arm: a37xx: pci: Do not try to access other buses when link is down by Pali Rohár · 2 years, 9 months ago
- 43691bb watchdog: armada_37xx: Convert to official DT bindings by Pali Rohár · 2 years, 9 months ago
- ecdc7bf usb: ehci: ehci-marvell: Update compatible string to official DT bindings by Pali Rohár · 2 years, 9 months ago
- 570a7a5 phy: marvell: a3700: Update compatible string to official DT bindings by Pali Rohár · 2 years, 9 months ago
- 3f0032f rtc: ds1307: Add bindings for microchip, mcp7940x by Pali Rohár · 2 years, 9 months ago
- 7e1c4fd arm: a37xx: pci: Ensure that root port is always on root zero bus by Pali Rohár · 2 years, 10 months ago
- 0c8b55f arm: a37xx: pci: Use dev_read_addr() by Pali Rohár · 2 years, 10 months ago
- 660a941 arm: a37xx: pci: Cleanup macro names by Pali Rohár · 2 years, 10 months ago
- 810cde3 arm: a37xx: pci: Use standard register macros from pci.h by Pali Rohár · 2 years, 10 months ago
- 7d02750 Merge branch 'master' of git://source.denx.de/u-boot-usb by Tom Rini · 2 years, 9 months ago
- 5f31d4a drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck by Sinthu Raja · 2 years, 10 months ago
- e8146ea drivers: power: pmic: Add support for tps659412 PMIC by Sinthu Raja · 2 years, 10 months ago
- ec2b73d usb: xhci: reset endpoint on USB stall by Stefan Agner · 3 years, 2 months ago
- eefabee usb: dwc3: core: stop the core when it's removed by Angus Ainslie · 2 years, 10 months ago
- 6e382a8 usb: dwc3: dwc3-generic: check the parent nodes by Angus Ainslie · 2 years, 10 months ago
- 9f846d9 video: Add missing dependency for DM_GPIO by Michal Simek · 2 years, 10 months ago
- c8bc698 scsi: ceva: Enable PHY and reset support by Michal Simek · 2 years, 10 months ago
- 1c5e991 phy: zynqmp: Add support for sata and DP phy initialization by Michal Simek · 2 years, 10 months ago
- 07168c6 arm64: zynqmp: Add command for disabling loading other overlays by Michal Simek · 2 years, 10 months ago
- 783e74c xilinx: firmware: Introduce zynqmp_pmufw_node() for loading PMU fragments by Michal Simek · 2 years, 10 months ago
- 0fd9f36 power: zynqmp: Add power domain driver for ZynqMP by Michal Simek · 2 years, 10 months ago
- a59a8cb phy: nop-phy: Enable reset-gpios support by Adam Ford · 2 years, 10 months ago
- fa4282a DFU: Check the number of arguments and argument string strictly by Masami Hiramatsu · 2 years, 10 months ago
- f815c33 DFU: Accept redundant spaces and tabs in dfu_alt_info by Masami Hiramatsu · 2 years, 10 months ago
- 020bb2c DFU: Do not copy the entity name over the buffer size by Masami Hiramatsu · 2 years, 10 months ago
- 6a0904b button: adc: set state to pressed when the voltage is closest to nominal by Peter Cai · 2 years, 10 months ago
- bb91031 Merge https://source.denx.de/u-boot/custodians/u-boot-usb by Tom Rini · 2 years, 10 months ago
- 98a80cd usb: gadget: ci: Avoid null pointer dereference by Marek Vasut · 2 years, 10 months ago
- 33da95a usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mn by Adam Ford · 2 years, 10 months ago
- 5348dba input: apple: Add support for Apple SPI keyboard by Mark Kettenis · 2 years, 10 months ago
- 0c3e924 spi: apple: Add driver for Apple SPI controller by Mark Kettenis · 2 years, 10 months ago
- 31d5f7b nvme: apple: Add driver for Apple NVMe storage controller by Mark Kettenis · 2 years, 10 months ago
- 9e8c483 power: domain: apple: Add reset support by Mark Kettenis · 2 years, 10 months ago
- a106a30 nvme: Add shutdown function by Mark Kettenis · 2 years, 10 months ago
- 7579e90 nvme: Introduce driver ops by Mark Kettenis · 2 years, 10 months ago
- f3efb3b mailbox: apple: Add driver for Apple IOP mailbox by Mark Kettenis · 2 years, 10 months ago
- f8463d6 nvme: Split out PCI support by Mark Kettenis · 2 years, 10 months ago
- 331f7f9 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv by Tom Rini · 2 years, 10 months ago
- 6f775ff Merge tag 'dm-pull-8feb22-take3' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm by Tom Rini · 2 years, 10 months ago
- c0fe284 serial: Add RISC-V HTIF console driver by Anup Patel · 2 years, 10 months ago
- 6fe2dd5 serial-uclass: fix build warning by Heiko Schocher · 2 years, 10 months ago
- 366daf6 serial: remove nulldev_serial_input by Heiko Schocher · 2 years, 10 months ago
- c5e6ec1 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mmc by Tom Rini · 2 years, 10 months ago
- 231e774 Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig by Simon Glass · 2 years, 10 months ago