Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 9c1e0bf7088a1acd9fdb3437ef6d0579cc390f32
  1. 9c1e0bf configs: Add network device support for bx50v3 products by Ian Ray · Wed Jan 10 20:31:29 2018 +0100
  2. 59be789 board: ge: Enable access to i2c bus 1 and 2 by Martyn Welch · Wed Jan 10 20:31:28 2018 +0100
  3. 20de5b0 rtc: adding RX8010SJ rtc driver by Nandor Han · Wed Jan 10 20:31:27 2018 +0100
  4. 68d31f6 net: e1000: implement eth_write_hwaddr by Hannu Lounento · Wed Jan 10 20:31:26 2018 +0100
  5. f36be3c net: e1000: split e1000_read_mac_addr by Hannu Lounento · Wed Jan 10 20:31:25 2018 +0100
  6. c56999e net: e1000: add support for writing to EEPROM by Hannu Lounento · Wed Jan 10 20:31:24 2018 +0100
  7. 01be8a9 imx: mx8m: add ddr controller memory map by Peng Fan · Wed Jan 10 13:20:47 2018 +0800
  8. 45e9aa1 power: pmic/regulator allow dm be omitted by SPL by Peng Fan · Wed Jan 10 13:20:46 2018 +0800
  9. d76f3b0 imx: imx8mq: add dtsi file by Peng Fan · Wed Jan 10 13:20:45 2018 +0800
  10. e267091 net: fec: fix build warnings for 64bits support by Ye Li · Wed Jan 10 13:20:44 2018 +0800
  11. bf8e58b net: fec: do not access reserved register for i.MX8M by Peng Fan · Wed Jan 10 13:20:43 2018 +0800
  12. fa94fb4 gpio: mxc: add i.MX8M support by Peng Fan · Wed Jan 10 13:20:42 2018 +0800
  13. 3f5a8a3 imx: lcdif: include i.MX8M by Peng Fan · Wed Jan 10 13:20:41 2018 +0800
  14. 3364c4b mmc: fsl_esdhc: support i.MX8M by Peng Fan · Wed Jan 10 13:20:40 2018 +0800
  15. 716d496 misc: ocotp: add i.MX8M support by Peng Fan · Wed Jan 10 13:20:39 2018 +0800
  16. 3926d8c imx: makefile: compile files for i.MX8M by Peng Fan · Wed Jan 10 13:20:38 2018 +0800
  17. eae4de2 imx: mx8m: add soc related settings and files by Peng Fan · Wed Jan 10 13:20:37 2018 +0800
  18. c131a38 imx: mx7: move mmc env code to mmc_env.c by Peng Fan · Wed Jan 10 13:20:36 2018 +0800
  19. 24d3fbc imx: cpu: support get_boot_device for i.MX8M by Peng Fan · Wed Jan 10 13:20:35 2018 +0800
  20. d64a3c5 imx: mx7: move get_boot_device to cpu.c by Peng Fan · Wed Jan 10 13:20:34 2018 +0800
  21. bac0845 imx: bootaux: support i.MX8M by Peng Fan · Wed Jan 10 13:20:33 2018 +0800
  22. d7e46ca imx: cleanup bootaux by Peng Fan · Wed Jan 10 13:20:32 2018 +0800
  23. bbb2094 imx: refactor imx_get_mac_from_fuse by Peng Fan · Wed Jan 10 13:20:31 2018 +0800
  24. a12bf3c imx: cpu: add cpu speed/grade for i.MX8M by Peng Fan · Wed Jan 10 13:20:30 2018 +0800
  25. 7753bc7 imx: cpu: move speed/temp to common cpu by Peng Fan · Wed Jan 10 13:20:29 2018 +0800
  26. 62ebfc6 imx: add pad settings bit definition for i.MX8M by Peng Fan · Wed Jan 10 13:20:28 2018 +0800
  27. 44eaba6 imx: add i.MX8MQ SoC Revision and is_mx8m helper by Peng Fan · Wed Jan 10 13:20:27 2018 +0800
  28. 58f19b4 imx: spl: implement spl_boot_device for i.MX8M by Peng Fan · Wed Jan 10 13:20:26 2018 +0800
  29. a78e0ac imx: cpu: update cpu file to support i.MX8M by Peng Fan · Wed Jan 10 13:20:25 2018 +0800
  30. bad5509 imx: boot_mode: add USB_BOOT entry by Peng Fan · Wed Jan 10 13:20:24 2018 +0800
  31. aa3b907 imx: add sip function by Peng Fan · Wed Jan 10 13:20:23 2018 +0800
  32. 88057bc imx: mx8m: add clock driver by Peng Fan · Wed Jan 10 13:20:22 2018 +0800
  33. 7dd2aaf imx: mx8m: add pin header file by Peng Fan · Wed Jan 10 13:20:21 2018 +0800
  34. b11a734 imx: mx8m: add register definition header file by Peng Fan · Wed Jan 10 13:20:20 2018 +0800
  35. 6629488 imx: add i.MX8M into Kconfig by Peng Fan · Wed Jan 10 13:20:19 2018 +0800
  36. d0e3c12 configs: icore: enable nand on mmc defconfig by Jagan Teki · Wed Jan 10 00:19:53 2018 +0530
  37. cd19d31 configs: enable spl support wrt env device by Jagan Teki · Wed Jan 10 00:19:52 2018 +0530
  38. f46fb18 imx: mx7: psci: add system power off support by Anson Huang · Sun Jan 07 14:34:32 2018 +0800
  39. f20bc13 imx: mx7: psci: add system reset support by Anson Huang · Sun Jan 07 14:34:31 2018 +0800
  40. 769f48e mx7_common: use psci 1.0 instead of 0.1 by Anson Huang · Sun Jan 07 14:34:30 2018 +0800
  41. 6e4572f board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit by Jagan Teki · Sat Jan 06 00:02:04 2018 +0530
  42. 39fcff6 Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries by Lukasz Majewski · Mon Jan 29 19:33:32 2018 +0100
  43. 6e78274 usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command by Lukasz Majewski · Mon Jan 29 19:28:02 2018 +0100
  44. e364e4b Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig by Lukasz Majewski · Mon Jan 29 19:25:54 2018 +0100
  45. 3c32b42 Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig by Lukasz Majewski · Mon Jan 29 19:30:18 2018 +0100
  46. b886ed9 Kconfig: usb: Sort USB_FUNCTION_* entries by Lukasz Majewski · Mon Jan 29 19:21:39 2018 +0100
  47. 8f9ce3a env: sf: use env_import_redund to simplify env_sf_load by Simon Goldschmidt · Wed Jan 31 14:47:13 2018 +0100
  48. 35b4c32 env: make env drivers propagate env_import return value by Simon Goldschmidt · Wed Jan 31 14:47:12 2018 +0100
  49. e07096e env: move more common code to env_import_redund by Simon Goldschmidt · Wed Jan 31 14:47:11 2018 +0100
  50. 32c3eb5 env: make env_import(_redund) return 0 on success, not 1 by Simon Goldschmidt · Wed Jan 31 14:47:10 2018 +0100
  51. 5a90fb7 cmd: nvedit: env_get_f must check for env_get_char error codes by Simon Goldschmidt · Wed Jan 31 07:56:48 2018 +0100
  52. 0129db7 Merge git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · Wed Jan 31 18:44:31 2018 -0500
  53. d97ca59 davinci: Fix omapl138_lcdk builds by Tom Rini · Wed Jan 31 15:34:49 2018 -0500
  54. c96b0f0 Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze by Tom Rini · Wed Jan 31 07:10:55 2018 -0500
  55. ed3b082 Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig by Adam Ford · Wed Jan 24 15:21:21 2018 -0600
  56. 71750ee Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig by Adam Ford · Tue Jan 23 04:04:28 2018 -0600
  57. eb730bd Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig by Derald D. Woods · Mon Jan 22 17:17:10 2018 -0600
  58. 12020ed armv8: ls2088ardb: Add 3DS RDIMM support by York Sun · Mon Jan 29 09:44:40 2018 -0800
  59. be9aaa7 armv8: ls1046ardb: Add RDIMM support by York Sun · Mon Jan 29 09:44:39 2018 -0800
  60. 74588bb drivers/ddr/fsl: Cleanup unused variable by York Sun · Mon Jan 29 09:44:38 2018 -0800
  61. 194c2f4 drivers/ddr/fsl: Modify binding registers to save time on data init by York Sun · Mon Jan 29 09:44:37 2018 -0800
  62. bc2f32a drivers/ddr/fsl: Add calculation of register control words by York Sun · Mon Jan 29 10:24:08 2018 -0800
  63. 6db4fdd drivers/ddr/fsl: Add 3DS RDIMM support by York Sun · Mon Jan 29 09:44:35 2018 -0800
  64. 2a4859e drivers/ddr/fsl: Fix workaround for A009803 by York Sun · Mon Jan 29 09:44:34 2018 -0800
  65. d9f7fa0 drivers/ddr/fsl: Fix DDR4 RDIMM support by York Sun · Mon Jan 29 09:44:33 2018 -0800
  66. 69803fc armv8: ls1088a: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs by Ashish Kumar · Mon Jan 29 12:11:20 2018 +0530
  67. 8dadfb4 driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl by Yogesh Gaur · Tue Jan 16 10:08:24 2018 +0530
  68. 4c3ebf7 Merge git://git.denx.de/u-boot-x86 by Tom Rini · Tue Jan 30 10:09:01 2018 -0500
  69. 4670e27 x86: kconfig: Remove meaningless 'select n' by Ulf Magnusson · Tue Jan 30 13:59:03 2018 +0100
  70. 008454f x86: quark: Fix unused warnings by Tom Rini · Sat Jan 27 15:13:47 2018 -0500
  71. 12c8fe3 cmd/bdinfo: print relocation info on X86 by Heinrich Schuchardt · Wed Jan 24 19:52:29 2018 +0100
  72. 22069e2 x86: qemu: qfw: Implement acpi_get_rsdp_addr() by Bin Meng · Tue Jan 30 05:01:17 2018 -0800
  73. e102925 x86: acpi: Use an API to get the ACPI RSDP table address by Bin Meng · Tue Jan 30 05:01:16 2018 -0800
  74. 3e3b16a arm64: zynqmp: Fix misspelled choice default by Ulf Magnusson · Tue Jan 30 14:02:01 2018 +0100
  75. 6124b05 arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig by Vipul Kumar · Wed Jan 24 10:51:31 2018 +0530
  76. 35b6f9c microblaze: Moved ethernet PHY configs of Microblaze board to defconfig by Vipul Kumar · Wed Jan 24 10:51:32 2018 +0530
  77. 603ca6d arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig by Vipul Kumar · Wed Jan 24 10:51:30 2018 +0530
  78. b19da2c arm: zynq: Remove ethernet alias for topic-miami by Michal Simek · Wed Jan 24 09:37:30 2018 +0100
  79. 40c2525 arm: zynq: Mark cc108 uart to be initialized before relocation by Michal Simek · Wed Jan 17 10:17:19 2018 +0100
  80. 98d0f1f arm: zynq: Update years in copyright to reflect latest changes by Michal Simek · Wed Jan 17 07:37:47 2018 +0100
  81. d3a8bd8 arm64: zynqmp: Add psu_init for zcu102-rev1.0 by Michal Simek · Wed Jan 10 14:48:53 2018 +0100
  82. f2f0864 arm64: zynqmp: Prepare psu_init rework by Michal Simek · Wed Jan 10 09:36:09 2018 +0100
  83. 1a1ab5a arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED by Michal Simek · Mon Jan 15 12:52:59 2018 +0100
  84. 20966ec arm64: zynqmp: Remove unused empty functions by Michal Simek · Tue Jan 09 14:25:38 2018 +0100
  85. 18a702e nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT by Ezequiel Garcia · Mon Jan 15 12:48:12 2018 -0300
  86. b0a4f13 nand: arasan_nfc: Use the calculated ecc address for updating ecc register by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:22 2018 +0530
  87. 45e512c nand: arasan_nfc: Add support for ondie ecc by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:21 2018 +0530
  88. 80c889c nand: arasan_nfc: Move common ecc struct initialization init routine by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:20 2018 +0530
  89. da92c97 xilinx: zynqmp: Add new target with only emmc enabled by Siva Durga Prasad Paladugu · Fri Jan 05 16:16:16 2018 +0530
  90. 95dbaaf xilinx: zynqmp: Add new target with only nand enabled by Siva Durga Prasad Paladugu · Fri Jan 05 16:16:15 2018 +0530
  91. cafb631 arm64: zynqmp: Provide a config to not map DDR region in MMU table by Siva Durga Prasad Paladugu · Fri Jan 12 15:35:46 2018 +0530
  92. c8785f2 arm64: zynqmp: Propagate error value from psu_init() by Michal Simek · Wed Jan 10 11:48:48 2018 +0100
  93. 4fc8b52 arm64: zynqmp: Remove whitespaces in psu_init() comment by Michal Simek · Tue Jan 09 14:21:48 2018 +0100
  94. ddf924f arm: zynq: Fix pmu register description coding style by Michal Simek · Wed Nov 16 09:29:57 2016 +0100
  95. 8a0e11c arm: zynq: Enable distro defaults setting by Michal Simek · Tue Jan 09 19:31:16 2018 +0100
  96. 0c60e2f arm: zynq: Move bootcommand to defconfig by Michal Simek · Tue Jan 09 17:41:37 2018 +0100
  97. 846d61b arm: zynq: Enable DM_GPIO when needed by Michal Simek · Tue Jan 09 15:27:31 2018 +0100
  98. 6d35f3f arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled by Michal Simek · Tue Jan 09 14:49:28 2018 +0100
  99. d25aefd arm: zynq: Enable BLK when needed by Michal Simek · Tue Jan 09 14:52:29 2018 +0100
  100. f3facd1 arm: zynq: Disable networking for zc770 xm011 by Michal Simek · Mon Jan 08 16:43:59 2018 +0100