1. 88057bc imx: mx8m: add clock driver by Peng Fan · Wed Jan 10 13:20:22 2018 +0800
  2. 7dd2aaf imx: mx8m: add pin header file by Peng Fan · Wed Jan 10 13:20:21 2018 +0800
  3. b11a734 imx: mx8m: add register definition header file by Peng Fan · Wed Jan 10 13:20:20 2018 +0800
  4. 6629488 imx: add i.MX8M into Kconfig by Peng Fan · Wed Jan 10 13:20:19 2018 +0800
  5. d0e3c12 configs: icore: enable nand on mmc defconfig by Jagan Teki · Wed Jan 10 00:19:53 2018 +0530
  6. cd19d31 configs: enable spl support wrt env device by Jagan Teki · Wed Jan 10 00:19:52 2018 +0530
  7. f46fb18 imx: mx7: psci: add system power off support by Anson Huang · Sun Jan 07 14:34:32 2018 +0800
  8. f20bc13 imx: mx7: psci: add system reset support by Anson Huang · Sun Jan 07 14:34:31 2018 +0800
  9. 769f48e mx7_common: use psci 1.0 instead of 0.1 by Anson Huang · Sun Jan 07 14:34:30 2018 +0800
  10. 6e4572f board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit by Jagan Teki · Sat Jan 06 00:02:04 2018 +0530
  11. 39fcff6 Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries by Lukasz Majewski · Mon Jan 29 19:33:32 2018 +0100
  12. 6e78274 usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command by Lukasz Majewski · Mon Jan 29 19:28:02 2018 +0100
  13. e364e4b Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig by Lukasz Majewski · Mon Jan 29 19:25:54 2018 +0100
  14. 3c32b42 Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig by Lukasz Majewski · Mon Jan 29 19:30:18 2018 +0100
  15. b886ed9 Kconfig: usb: Sort USB_FUNCTION_* entries by Lukasz Majewski · Mon Jan 29 19:21:39 2018 +0100
  16. 8f9ce3a env: sf: use env_import_redund to simplify env_sf_load by Simon Goldschmidt · Wed Jan 31 14:47:13 2018 +0100
  17. 35b4c32 env: make env drivers propagate env_import return value by Simon Goldschmidt · Wed Jan 31 14:47:12 2018 +0100
  18. e07096e env: move more common code to env_import_redund by Simon Goldschmidt · Wed Jan 31 14:47:11 2018 +0100
  19. 32c3eb5 env: make env_import(_redund) return 0 on success, not 1 by Simon Goldschmidt · Wed Jan 31 14:47:10 2018 +0100
  20. 5a90fb7 cmd: nvedit: env_get_f must check for env_get_char error codes by Simon Goldschmidt · Wed Jan 31 07:56:48 2018 +0100
  21. 0129db7 Merge git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · Wed Jan 31 18:44:31 2018 -0500
  22. d97ca59 davinci: Fix omapl138_lcdk builds by Tom Rini · Wed Jan 31 15:34:49 2018 -0500
  23. c96b0f0 Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblaze by Tom Rini · Wed Jan 31 07:10:55 2018 -0500
  24. ed3b082 Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig by Adam Ford · Wed Jan 24 15:21:21 2018 -0600
  25. 71750ee Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig by Adam Ford · Tue Jan 23 04:04:28 2018 -0600
  26. eb730bd Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig by Derald D. Woods · Mon Jan 22 17:17:10 2018 -0600
  27. 12020ed armv8: ls2088ardb: Add 3DS RDIMM support by York Sun · Mon Jan 29 09:44:40 2018 -0800
  28. be9aaa7 armv8: ls1046ardb: Add RDIMM support by York Sun · Mon Jan 29 09:44:39 2018 -0800
  29. 74588bb drivers/ddr/fsl: Cleanup unused variable by York Sun · Mon Jan 29 09:44:38 2018 -0800
  30. 194c2f4 drivers/ddr/fsl: Modify binding registers to save time on data init by York Sun · Mon Jan 29 09:44:37 2018 -0800
  31. bc2f32a drivers/ddr/fsl: Add calculation of register control words by York Sun · Mon Jan 29 10:24:08 2018 -0800
  32. 6db4fdd drivers/ddr/fsl: Add 3DS RDIMM support by York Sun · Mon Jan 29 09:44:35 2018 -0800
  33. 2a4859e drivers/ddr/fsl: Fix workaround for A009803 by York Sun · Mon Jan 29 09:44:34 2018 -0800
  34. d9f7fa0 drivers/ddr/fsl: Fix DDR4 RDIMM support by York Sun · Mon Jan 29 09:44:33 2018 -0800
  35. 69803fc armv8: ls1088a: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs by Ashish Kumar · Mon Jan 29 12:11:20 2018 +0530
  36. 8dadfb4 driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl by Yogesh Gaur · Tue Jan 16 10:08:24 2018 +0530
  37. 4c3ebf7 Merge git://git.denx.de/u-boot-x86 by Tom Rini · Tue Jan 30 10:09:01 2018 -0500
  38. 4670e27 x86: kconfig: Remove meaningless 'select n' by Ulf Magnusson · Tue Jan 30 13:59:03 2018 +0100
  39. 008454f x86: quark: Fix unused warnings by Tom Rini · Sat Jan 27 15:13:47 2018 -0500
  40. 12c8fe3 cmd/bdinfo: print relocation info on X86 by Heinrich Schuchardt · Wed Jan 24 19:52:29 2018 +0100
  41. 22069e2 x86: qemu: qfw: Implement acpi_get_rsdp_addr() by Bin Meng · Tue Jan 30 05:01:17 2018 -0800
  42. e102925 x86: acpi: Use an API to get the ACPI RSDP table address by Bin Meng · Tue Jan 30 05:01:16 2018 -0800
  43. 3e3b16a arm64: zynqmp: Fix misspelled choice default by Ulf Magnusson · Tue Jan 30 14:02:01 2018 +0100
  44. 6124b05 arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig by Vipul Kumar · Wed Jan 24 10:51:31 2018 +0530
  45. 35b6f9c microblaze: Moved ethernet PHY configs of Microblaze board to defconfig by Vipul Kumar · Wed Jan 24 10:51:32 2018 +0530
  46. 603ca6d arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig by Vipul Kumar · Wed Jan 24 10:51:30 2018 +0530
  47. b19da2c arm: zynq: Remove ethernet alias for topic-miami by Michal Simek · Wed Jan 24 09:37:30 2018 +0100
  48. 40c2525 arm: zynq: Mark cc108 uart to be initialized before relocation by Michal Simek · Wed Jan 17 10:17:19 2018 +0100
  49. 98d0f1f arm: zynq: Update years in copyright to reflect latest changes by Michal Simek · Wed Jan 17 07:37:47 2018 +0100
  50. d3a8bd8 arm64: zynqmp: Add psu_init for zcu102-rev1.0 by Michal Simek · Wed Jan 10 14:48:53 2018 +0100
  51. f2f0864 arm64: zynqmp: Prepare psu_init rework by Michal Simek · Wed Jan 10 09:36:09 2018 +0100
  52. 1a1ab5a arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED by Michal Simek · Mon Jan 15 12:52:59 2018 +0100
  53. 20966ec arm64: zynqmp: Remove unused empty functions by Michal Simek · Tue Jan 09 14:25:38 2018 +0100
  54. 18a702e nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT by Ezequiel Garcia · Mon Jan 15 12:48:12 2018 -0300
  55. b0a4f13 nand: arasan_nfc: Use the calculated ecc address for updating ecc register by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:22 2018 +0530
  56. 45e512c nand: arasan_nfc: Add support for ondie ecc by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:21 2018 +0530
  57. 80c889c nand: arasan_nfc: Move common ecc struct initialization init routine by Siva Durga Prasad Paladugu · Thu Jan 04 16:04:20 2018 +0530
  58. da92c97 xilinx: zynqmp: Add new target with only emmc enabled by Siva Durga Prasad Paladugu · Fri Jan 05 16:16:16 2018 +0530
  59. 95dbaaf xilinx: zynqmp: Add new target with only nand enabled by Siva Durga Prasad Paladugu · Fri Jan 05 16:16:15 2018 +0530
  60. cafb631 arm64: zynqmp: Provide a config to not map DDR region in MMU table by Siva Durga Prasad Paladugu · Fri Jan 12 15:35:46 2018 +0530
  61. c8785f2 arm64: zynqmp: Propagate error value from psu_init() by Michal Simek · Wed Jan 10 11:48:48 2018 +0100
  62. 4fc8b52 arm64: zynqmp: Remove whitespaces in psu_init() comment by Michal Simek · Tue Jan 09 14:21:48 2018 +0100
  63. ddf924f arm: zynq: Fix pmu register description coding style by Michal Simek · Wed Nov 16 09:29:57 2016 +0100
  64. 8a0e11c arm: zynq: Enable distro defaults setting by Michal Simek · Tue Jan 09 19:31:16 2018 +0100
  65. 0c60e2f arm: zynq: Move bootcommand to defconfig by Michal Simek · Tue Jan 09 17:41:37 2018 +0100
  66. 846d61b arm: zynq: Enable DM_GPIO when needed by Michal Simek · Tue Jan 09 15:27:31 2018 +0100
  67. 6d35f3f arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled by Michal Simek · Tue Jan 09 14:49:28 2018 +0100
  68. d25aefd arm: zynq: Enable BLK when needed by Michal Simek · Tue Jan 09 14:52:29 2018 +0100
  69. f3facd1 arm: zynq: Disable networking for zc770 xm011 by Michal Simek · Mon Jan 08 16:43:59 2018 +0100
  70. 0519701 arm: zynq: Enable debug console for zc770 xm011 by Michal Simek · Fri Dec 15 07:46:12 2017 +0100
  71. 96794a7 arm: zynq: Add identification string to Xilinx boards by Michal Simek · Wed Dec 13 10:35:06 2017 +0100
  72. fcc0992 armv8: zynqmp: Map PCIe High as device memory by Anders Hedlund · Tue Dec 19 17:24:41 2017 +0100
  73. 245c556 xilinx: zynqmp: Use strlen only if env_get doesn't return null by Siva Durga Prasad Paladugu · Wed Dec 20 16:35:06 2017 +0530
  74. fb97d31 ARM: zynq: remove unused CONFIG_ZC770_XM01* options by Masahiro Yamada · Tue Nov 28 15:58:46 2017 +0900
  75. f8446ae arm: zynq: Fix types in ps7_spl_init by Michal Simek · Fri Jan 12 14:24:50 2018 +0100
  76. df7cfc7 arm: zynq: Add support for zc770-xm011-x16 configuration by Michal Simek · Mon Jan 08 16:52:49 2018 +0100
  77. 9fde6c9 arm: zynq: Add zc770-xm013 spl configuration by Michal Simek · Fri Jan 12 14:46:19 2018 +0100
  78. 1d87ac8 arm: zynq: Add zc770-xm012 spl configuration by Michal Simek · Fri Jan 12 14:46:00 2018 +0100
  79. 9b254f6 arm: zynq: Add zc770-xm011 spl configuration by Michal Simek · Fri Jan 12 14:34:43 2018 +0100
  80. 29fa230 arm: zynq: Add zc770-xm010 spl configuration by Michal Simek · Fri Jan 12 14:45:28 2018 +0100
  81. 4ff54de doc: zynq: Describe status of zc770-xm011 by Michal Simek · Mon Jan 15 07:38:21 2018 +0100
  82. 66d3e63 x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters by Andy Shevchenko · Wed Jan 10 19:40:15 2018 +0200
  83. 8b7adf8 x86: zImage: Move subarch assignment out of cmd_line check by Andy Shevchenko · Wed Jan 10 19:40:14 2018 +0200
  84. 4b05bac x86: Fix reference to QEMU variant of write_acpi_tables() by Andy Shevchenko · Wed Jan 10 19:33:10 2018 +0200
  85. 6b07d36 x86: tangier: Make _CRS for BTH0 Serialized to avoid warning by Andy Shevchenko · Wed Jan 10 18:07:26 2018 +0200
  86. ea2e31b configs: x86: allow to override CONFIG_BOOTCOMMAND by Heinrich Schuchardt · Wed Jan 03 16:23:46 2018 +0100
  87. 0f65734 Prepare v2018.03-rc1 by Tom Rini · Mon Jan 29 20:12:33 2018 -0500
  88. 95bed2d spl: include timezone in banner by Klaus Goger · Thu Jan 04 07:22:11 2018 +0100
  89. 9aaa236 aes: Allow non-zero initialization vector by Андрей Мозжухин · Wed Jan 03 15:43:56 2018 +0300
  90. 61645e7 kconfig: revert change that was not needed for -Wformat-security by Masahiro Yamada · Sun Jan 28 18:41:23 2018 +0900
  91. 23884dc fs: btrfs: Fix printf format character warning by Tom Rini · Sat Jan 27 17:23:21 2018 -0500
  92. 88765f9 mvpp2: Fix warning over 32bit vs 64bit targets by Tom Rini · Sat Jan 27 14:48:08 2018 -0500
  93. 24e8578 clk: clk_stm32: Add .set_rate callback by Patrice Chotard · Mon Jan 29 18:14:14 2018 +0100
  94. 6b1c300 board: stm32: Fix stm32f746-disco boot by Patrice Chotard · Mon Jan 29 13:44:20 2018 +0100
  95. c8bda54 serial: Make full device search optional by Alexander Graf · Mon Jan 29 13:57:20 2018 +0100
  96. 7a9a6ad Merge git://git.denx.de/u-boot-marvell by Tom Rini · Mon Jan 29 08:17:28 2018 -0500
  97. 80fd688 Merge git://git.denx.de/u-boot-cfi-flash by Tom Rini · Mon Jan 29 08:17:13 2018 -0500
  98. 88f89b1 tools/mrvl_uart.sh: Tidy script output by Andreas Färber · Sat Jan 20 13:18:39 2018 +0100
  99. fd6bbed tools/mrvl_uart.sh: Fix minicom baudrate by Andreas Färber · Sat Jan 20 13:07:09 2018 +0100
  100. 28f1898 cfi_flash: Always define cfi_flash_num_flash_banks by Mario Six · Fri Jan 26 14:43:56 2018 +0100