- 62b46de ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board by Christoph Niedermaier · 3 years ago
- b6d5e13 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board by Ariel D'Alessandro · 3 years ago
- 70be7a2 colibri-imx8x: add on-module gpio expander fxl6408 by Oleksandr Suvorov · 3 years ago
- a96ed8d arm: imx8m: imx8mm-cl-iot-gate: detect extension board by Ying-Chun Liu (PaulLiu) · 3 years, 1 month ago
- e612f68 arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays by Ying-Chun Liu (PaulLiu) · 3 years, 1 month ago
- f2c4a39 imx8ulp: implement to obtain the SoC current temperature by Alice Guo · 3 years, 1 month ago
- 8840830 imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock by Ye Li · 3 years, 1 month ago
- 23ee0e1 imx8ulp: clock: Support to enable/disable the ADC1 clock by Alice Guo · 3 years, 1 month ago
- 992b0ae imx8ulp: Update ethernet mac to get from fuse by Ye Li · 3 years, 1 month ago
- cb7e375 imx8ulp: clock: Support to reset DCNano and MIPI DSI by Ye Li · 3 years, 1 month ago
- 328f201 imx8ulp: clock: Reset DDR controller before clock enable by Ye Li · 3 years, 1 month ago
- 133f8b8 imx8ulp: Workaround LPOSC_TRIM fuse load issue by Ye Li · 3 years, 1 month ago
- f012ceb imx8ulp: Remove freescale name from CPU revision by Ye Li · 3 years, 1 month ago
- 715cfa0 imx8ulp: Fix DCNANO QoS setting by Ye Li · 3 years, 1 month ago
- a031155 imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest by Ye Li · 3 years, 1 month ago
- 27666ca imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display by Ye Li · 3 years, 1 month ago
- d325d37 imx8ulp: rdc: allow A35 access flexspi0 mem by Ye Li · 3 years, 1 month ago
- 3d3dfb0 imx8ulp: clock: Add MIPI DSI clock and DCNano clock by Ye Li · 3 years, 1 month ago
- da0469d imx8ulp: clock: Support LPAV clocks in cgc and pcc by Ye Li · 3 years, 1 month ago
- fa609b4 imx8ulp: assign PXP/HIFI4/EPDC to APD domain by Peng Fan · 3 years, 1 month ago
- 43819eb arm: imx8ulp: Allocate LPAV resources to AP domain by Ye Li · 3 years, 1 month ago
- 7201262 imx8ulp: soc: Check the DBD_EN fuse before setting RDC by Ye Li · 3 years, 1 month ago
- 1daf63f ARM: imx8m: support env in fat and ext4 by Ricardo Salveti · 3 years, 1 month ago
- dc5c6bf imx: nandbcb: Fix printf format in write_fcb by Pali Rohár · 3 years, 1 month ago
- 9ea1223 mxs: power: Change sequence of enabling DCDC switches by Lukasz Majewski · 3 years, 2 months ago
- b94a381 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux by Tim Harvey · 3 years, 2 months ago
- 0219250 mx7ulp_com: add support for SPL by Ricardo Salveti · 3 years, 3 months ago
- ebe59e2 mx7ulp: select soc features by Oleksandr Suvorov · 3 years, 3 months ago
- 9b29436 arm: imx: imx8mq: add support to get values for more clocks by Heiko Thiery · 3 years, 3 months ago
- 7aa01e2 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 10 months ago
- fc4c547 ARM: dts: suniv: Add device tree files and bindings for F1C100s by Icenowy Zheng · 2 years, 10 months ago
- 8f2d1c0 mach-sunxi: Add support for SUNIV architecture by Icenowy Zheng · 2 years, 10 months ago
- 8701e10 sunxi: Add F1C100s DRAM initial support by Icenowy Zheng · 2 years, 10 months ago
- 015051d ARM: sunxi: Add clock and uart to sunxi headers by Icenowy Zheng · 2 years, 10 months ago
- b198c2e arm: arm926ej-s: Add sunxi code by Icenowy Zheng · 2 years, 10 months ago
- c339098 mach-sunxi: Move timer code to mach folder by Jesse Taube · 2 years, 10 months ago
- 362132f arm: arm926ej-s: start.S: port save_boot_params support from armv7 code by Icenowy Zheng · 2 years, 10 months ago
- d5b6f7d armv8: remove no longer needed lowlevel_init.S by Andre Przywara · 2 years, 10 months ago
- b277429 sunxi: move early "SRAM setup" into separate file by Andre Przywara · 2 years, 10 months ago
- 5fc2556 sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 2 years, 10 months ago
- e2c133d sunxi: move non-essential code out of s_init() by Andre Przywara · 2 years, 10 months ago
- 56ee387 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code by Andre Przywara · 2 years, 10 months ago
- 463eb09 armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER by Alper Nebi Yasak · 2 years, 10 months ago
- 1526ba5 arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports by Vladimir Oltean · 2 years, 11 months ago
- 3cd5232 arm: dts: ls1028a-rdb: sync device tree with Linux by Vladimir Oltean · 2 years, 11 months ago
- f0f43e7 arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi by Vladimir Oltean · 2 years, 11 months ago
- e2b2046 arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 by Vladimir Oltean · 2 years, 11 months ago
- 603281d arm: dts: ls1028a-rdb: disable DSPI nodes by Vladimir Oltean · 2 years, 11 months ago
- fc203b3 arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux by Vladimir Oltean · 2 years, 11 months ago
- f673b53 arm: dts: ls1028a-rdb: sort nodes alphabetically by Vladimir Oltean · 2 years, 11 months ago
- 20b7d0a arm: dts: lx2160a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- 83fdf82 arm: dts: ls1028a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- 1fb043c arm: dts: ls1028a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- ebda278 arm: dts: lx2160a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- 296d6de arm: dts: ls1088a-rdb: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- a6ab49e arm: dts: ls1088a-qds: use Linux compatible string for RTC by Vladimir Oltean · 2 years, 11 months ago
- 3d1a8d2 arm/expu1/seli8: adapt dts NOR partition table to the latest used by Aleksandar Gerasimovski · 3 years ago
- 4f8a0f8 arm: ls1021a: limit debug eth phy speed to 100Mbps by Aleksandar Gerasimovski · 3 years ago
- e605fb1 board: traverse: add initial Ten64 support by Mathew McBride · 2 years, 10 months ago
- 7faa34a arm: kirkwood: Pogoplug-V4 : Add Kconfig files by Tony Dinh · 2 years, 10 months ago
- b1251f5 arm: kirkwood: Pogoplug-V4 : Add DTS files by Tony Dinh · 2 years, 10 months ago
- 4e04842 sunxi: Fix H616 DRAM read calibration for dual rank by Jernej Skrabec · 2 years, 10 months ago
- 137ab1c sunxi: fix H616 DRAM ODT support by Jernej Skrabec · 2 years, 10 months ago
- 2ff2a1d sunxi: Add option to prevent booting on power plug-in by Chris Morgan · 2 years, 10 months ago
- 8a4184c sunxi: gpio: Fix up pointer arithmetic by Andre Przywara · 2 years, 10 months ago
- 6dde4a2 sunxi: gpio: Add per-bank drive and pull setters by Samuel Holland · 3 years, 1 month ago
- 41abadc sunxi: gpio: Return void from setter functions by Samuel Holland · 3 years, 1 month ago
- cfc57ab ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL by Vignesh Raghavendra · 2 years, 10 months ago
- df29081 configs: stm32mp15: Enable OF_BOARD flag by Patrice Chotard · 2 years, 10 months ago
- f5b8571 stm32prog: add partition name in treat_partition_list error messages by Patrick Delaunay · 2 years, 11 months ago
- 7d2757f ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12 by Marek Vasut · 3 years ago
- 8b08dfb ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12 by Marek Vasut · 3 years ago
- 37868aa arm: dts: stm32mp15: alignment with v5.16 by Patrick Delaunay · 3 years ago
- 951edb4 stm32mp: correct the dependency for bootcount configs by Patrick Delaunay · 3 years ago
- 3cbff2a stm32mp: remove the bootcount activation by Patrick Delaunay · 3 years ago
- acb4169 ARM: dts: stm32: Add DFU support for DHCOR recovery by Marek Vasut · 3 years ago
- 2f7aae0 arm: stm32mp: Fix USB boot device report by Marek Vasut · 3 years ago
- 5a7affe arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI by Adam Ford · 2 years, 11 months ago
- eb56096 Convert CONFIG_AT91_EFLASH to Kconfig by Patrick Delaunay · 2 years, 11 months ago
- 1c38374 Convert CONFIG_BOOTP_SERVERIP to Kconfig by Simon Glass · 3 years ago
- 65831d9 Convert CONFIG_TIMESTAMP to Kconfig by Simon Glass · 3 years ago
- c340341 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 10 months ago
- 3110499 Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 2 years, 10 months ago
- 3a7bbd8 arm: mvebu: spl: Fix 100 column exceeds by Marek Behún · 2 years, 11 months ago
- 556eab6 arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible by Marek Behún · 2 years, 11 months ago
- 031d172 arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t by Marek Behún · 2 years, 11 months ago
- 46c871a arm: mvebu: spl: Print srcaddr in error message by Marek Behún · 2 years, 11 months ago
- 8242056 arm: mvebu: Check for kwbimage data checksum by Pali Rohár · 2 years, 11 months ago
- a157e12 arm: mvebu: Check that kwbimage blockid matches boot mode by Pali Rohár · 2 years, 11 months ago
- dda8f88 SPL: Add struct spl_boot_device parameter into spl_parse_board_header() by Pali Rohár · 2 years, 11 months ago
- eb7e1fc arm: mvebu: Check that kwbimage offset and blocksize are valid by Pali Rohár · 2 years, 11 months ago
- ed9bcb9 pci: pci_mvebu: Add support for Kirkwood PCIe controllers by Pali Rohár · 2 years, 11 months ago
- 5d6b448 fdt_support: Add fdt_for_each_node_by_compatible() helper macro by Marek Behún · 2 years, 11 months ago
- 47b4c02 doc: replace @return by Return: by Heinrich Schuchardt · 2 years, 11 months ago
- 774c9af Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 11 months ago
- 4384889 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung by Tom Rini · 2 years, 11 months ago
- 85593af arm64: zynqmp: Change firmware dependency by Michal Simek · 2 years, 11 months ago
- afab9b3 arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings by Shravya Kumbham · 2 years, 11 months ago
- 690dec0 arm64: zynqmp: Update USB node handle from dwc3 to usb by Manish Narani · 2 years, 11 months ago
- ae89fd8 arm64: zynqmp: Change compatible strings for cadence uart by Michal Simek · 2 years, 11 months ago