Gitiles
Code Review
Sign In
git01.mediatek.com
/
filogic
/
uboot
/
351d83193eabba5b4e85fc6e4df73be8c58b00d4
351d831
apalis/colibri_imx6/-imx6ull/_imx7: update env memory layout
by Marcel Ziswiler
· Tue Sep 27 17:50:52 2022 +0200
242b6f1
nitrogen6x: Remove extra quotes in fdtfile
by Ariel D'Alessandro
· Tue Sep 27 11:24:53 2022 -0300
3e5255c
clk-imx8mm: Only build QSPI clocks when CONFIG_NXP_FSPI=y
by Fabio Estevam
· Mon Sep 26 13:40:11 2022 -0300
0b3fa1b
clk-imx8mm: Only build ecspi clocks when CONFIG_DM_SPI=y
by Fabio Estevam
· Mon Sep 26 13:40:10 2022 -0300
704aa87
clk-imx8mm: Move CLK_ENET_AXI to the non-SPL section
by Fabio Estevam
· Mon Sep 26 13:40:09 2022 -0300
60896e0
clk-imx8mm: Only build PWM clocks in non-SPL code
by Fabio Estevam
· Mon Sep 26 13:40:08 2022 -0300
2a4b3b9
mmc: fsl_esdhc: fix problem when using clk driver
by Ye Li
· Sat Sep 24 00:29:33 2022 +0200
f3bccec
verdin-imx8mm: verdin-imx8mp: drop obsolete net/phy configs
by Marcel Ziswiler
· Wed Sep 21 13:34:19 2022 +0200
a9d7593
board: tbs2910: Add serial rx buffer in defconfig
by Soeren Moch
· Tue Sep 20 18:05:41 2022 +0200
583671a
board: tbs2910: Set all board dts files as maintained
by Soeren Moch
· Tue Sep 20 18:05:40 2022 +0200
3cb058d
imx8mm_evk: Add Serial Download Protocol support
by Fabio Estevam
· Mon Sep 19 21:20:14 2022 -0300
e2b3a7b
imx8mm_evk: Add an entry for USB boot
by Fabio Estevam
· Mon Sep 19 21:20:13 2022 -0300
e6b57eb
ARM: dts: imx8m: imx8mm-mx8menlo: Enable SPL SDP support
by Marek Vasut
· Mon Sep 19 21:41:18 2022 +0200
54ddbc3
ARM: imx8m: verdin-imx8mm: Drop bogus content from spl_board_init()
by Marek Vasut
· Mon Sep 19 21:41:17 2022 +0200
35370d0
ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init()
by Marek Vasut
· Mon Sep 19 21:41:16 2022 +0200
085555f
ARM: imx8m: Deduplicate CAAM init with arch_misc_init() call
by Marek Vasut
· Mon Sep 19 21:41:15 2022 +0200
331e3fc
ARM: dts: imx8mm: Swap i.MX8M Mini Menlo board UARTs back
by Marek Vasut
· Mon Sep 19 21:35:56 2022 +0200
28debca
arm: dts: imx8mm-venice-gw7903: add dig1_ctl and dig2_ctl gpios
by Tim Harvey
· Fri Sep 09 15:58:42 2022 -0700
4897fc2
board: gateworks: venice: update GW74xx PMIC config
by Tim Harvey
· Thu Sep 08 14:41:09 2022 -0700
feb2267
arm: dts: imx8mp-venice-gw74xx: update M2 gpio hogs
by Tim Harvey
· Thu Sep 08 13:42:01 2022 -0700
eb7878b
arm: dts: imx8mp-venice-gw74xx: fix uart configuration gpio hogs
by Tim Harvey
· Thu Sep 08 13:41:08 2022 -0700
48ed57d
ARM: imx8mp: verdin-imx8mp: Add memory size detection
by Francesco Dolcini
· Wed Sep 07 11:51:05 2022 +0200
1396e84
board: verdin-imx8mp: add call to ft_common_board_setup
by Philippe Schenker
· Mon Aug 29 19:59:53 2022 +0200
93eb850
board: verdin-imx8mm: add call to ft_common_board_setup
by Philippe Schenker
· Mon Aug 29 19:59:52 2022 +0200
26e05b3
imx: kontron-sl-mx8mm: Prepare for I2C display detection in environment script
by Frieder Schrempf
· Wed Aug 24 15:59:20 2022 +0200
3048ecd
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S
by Frieder Schrempf
· Wed Aug 24 15:59:19 2022 +0200
b296c0e
imx: kontron-sl-mx8mm: Simplify code in spl.c
by Frieder Schrempf
· Wed Aug 24 15:59:18 2022 +0200
d5a2fa4
imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names
by Frieder Schrempf
· Wed Aug 24 15:59:17 2022 +0200
476eb32
imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage
by Frieder Schrempf
· Wed Aug 24 15:59:16 2022 +0200
5375c8a
imx: kontron-sl-mx8mm: Adjust devicetree names, compatibles and model strings
by Frieder Schrempf
· Wed Aug 24 15:59:15 2022 +0200
939deb8
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types
by Frieder Schrempf
· Wed Aug 24 15:59:14 2022 +0200
6d6eced
imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters
by Frieder Schrempf
· Wed Aug 24 15:59:13 2022 +0200
771100c
imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint
by Frieder Schrempf
· Wed Aug 24 15:59:12 2022 +0200
ce296f1
imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment
by Frieder Schrempf
· Wed Aug 24 15:59:11 2022 +0200
d6582de
imx: kontron-sl-mx8mm: Enable bootaux command
by Frieder Schrempf
· Wed Aug 24 15:59:10 2022 +0200
38d01ee
imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT
by Frieder Schrempf
· Wed Aug 24 15:59:09 2022 +0200
e013b9b
imx: kontron-sl-mx8mm: Enable environment in MMC
by Frieder Schrempf
· Wed Aug 24 15:59:08 2022 +0200
87a1c52
imx: kontron-sl-mx8mm: Add redundant environment and SPI NOR partitions
by Frieder Schrempf
· Wed Aug 24 15:59:07 2022 +0200
a5d16c2
imx: kontron-sl-mx8mm: Enable MTD command
by Frieder Schrempf
· Wed Aug 24 15:59:06 2022 +0200
88b8f6a
imx: kontron-sl-mx8mm: Increase CONFIG_SYS_CBSIZE to 2K
by Frieder Schrempf
· Wed Aug 24 15:59:05 2022 +0200
b3b75e5
imx: kontron-sl-mx8mm: Remove custom board_boot_order() workaround
by Frieder Schrempf
· Wed Aug 24 15:59:04 2022 +0200
93e6ee4
imx: kontron-sl-mx8mm: Add support for loading from SPI NOR in SPL
by Frieder Schrempf
· Wed Aug 24 15:52:24 2022 +0200
a9f8185
imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees
by Frieder Schrempf
· Wed Aug 24 15:52:23 2022 +0200
ac194b1
imx: imx6ul: kontron-sl-mx6ul: Sync devicetrees
by Frieder Schrempf
· Tue Aug 23 16:29:15 2022 +0200
dbbb780
imx: imx6ul: kontron-sl-mx6ul: Migrate to use CONFIG_EXTRA_ENV_TEXT
by Frieder Schrempf
· Tue Aug 23 16:29:14 2022 +0200
7e957dc
imx: imx6ul: kontron-sl-mx6ul: Select correct boot and env device
by Frieder Schrempf
· Tue Aug 23 16:29:13 2022 +0200
419b3c6
imx: imx6ul: kontron-sl-mx6ul: Fix CONFIG_ENV_SPI_BUS
by Frieder Schrempf
· Tue Aug 23 16:29:12 2022 +0200
e618b3f
imx: imx6ul: kontron-sl-mx6ul: Enable migrated Kconfig options
by Frieder Schrempf
· Tue Aug 23 16:29:11 2022 +0200
c99da7e
Makefile: Make flash.bin target available for all platforms
by Frieder Schrempf
· Tue Aug 23 16:29:10 2022 +0200
1fec182
board: gateworks: venice: rename eeprom_init
by Tim Harvey
· Thu Aug 11 12:04:01 2022 -0700
e6abccd
arm: dts: imx8mm-venice-gw7902: add LTE modem gpios
by Tim Harvey
· Thu Aug 11 12:02:48 2022 -0700
672938b
imx8*_venice_defconfig: configure default MMC env device
by Tim Harvey
· Thu Aug 11 11:53:32 2022 -0700
3fbb53a
Merge branch '2022-10-18-TI-platform-updates'
by Tom Rini
· Tue Oct 18 18:13:39 2022 -0400
22cdb84
watchdog: omap_wdt: Switch required include for watchdog defines
by Tom Rini
· Mon Oct 10 16:29:17 2022 -0400
0d9083b
Nokia RX-51: Fix compilation with non-zero CONFIG_SYS_TEXT_BASE
by Pali Rohár
· Sun Oct 09 21:37:13 2022 +0200
990ec70
arm: mach-k3: Move hardware handling to common files
by Andrew Davis
· Fri Oct 07 14:22:05 2022 -0500
d95fcd8
arm: mach-k3: security: Use dma-mapping for cache ops
by Andrew Davis
· Fri Oct 07 12:12:29 2022 -0500
d2da284
dma: Transfer dma_ops should use DMA address types
by Andrew Davis
· Fri Oct 07 12:11:13 2022 -0500
b19093f
dma: ti-edma3: Add DMA map operations before and after transfers
by Andrew Davis
· Fri Oct 07 12:11:12 2022 -0500
afea0a2
dma: Use dma-mapping for cache ops and sync after write
by Andrew Davis
· Fri Oct 07 12:11:11 2022 -0500
f1d7205
arm: mach-k3: common: Set boot_fit on non-GP devices
by Andrew Davis
· Fri Oct 07 11:27:46 2022 -0500
b7c6fbb
phy: ti: j721e-wiz: add j784s4-wiz-10g module support
by Matt Ranostay
· Wed Oct 05 13:51:30 2022 -0700
95c82ec
arm: dts: k3-am64-evm: EMIF tool update to v0.08.40 for 1600MT/s DDR4
by Dave Gerlach
· Thu Sep 29 12:35:49 2022 -0500
d7760d0
arm: dts: k3-am64-sk: EMIF tool update to v0.08.40 and move to 1600MT/s LPDDR4
by Dave Gerlach
· Thu Sep 29 12:35:48 2022 -0500
68ecaef
Merge tag 'dm-pull-18oct22' of https://source.denx.de/u-boot/custodians/u-boot-dm
by Tom Rini
· Tue Oct 18 07:36:52 2022 -0400
6a3bd3f
Merge tag 'u-boot-stm32-20221018' of https://source.denx.de/u-boot/custodians/u-boot-stm
by Tom Rini
· Tue Oct 18 07:36:39 2022 -0400
00202f7
stm32mp: fix compilation issue with DEBUG_UART
by Patrick Delaunay
· Tue Oct 11 16:44:26 2022 +0200
65acf0b
ARM: dts: stm32: update SCMI dedicated file
by Patrick Delaunay
· Mon Oct 10 10:56:14 2022 +0200
086fa93
ARM: dts: stm32: Fix and expand PLL configuration comments
by Marek Vasut
· Tue Oct 11 22:42:44 2022 +0200
5278494
ARM: dts: stm32: Add DHCOR based Testbench board
by Marek Vasut
· Mon Sep 26 18:50:00 2022 +0200
549b570
ARM: dts: stm32: Drop extra newline from AV96 U-Boot extras DT
by Marek Vasut
· Mon Sep 26 18:46:31 2022 +0200
14dfb7e
ARM: stm32: Enable btrfs support on DHSOM
by Marek Vasut
· Mon Sep 26 18:44:58 2022 +0200
69e8995
ARM: dts: stm32: Remove buck3 regulator-always-on on AV96
by Marek Vasut
· Fri Sep 23 03:31:22 2022 +0200
49efb06
vbe: Add a test for VBE device tree fixups
by Simon Glass
· Tue Oct 11 09:47:20 2022 -0600
e6a211c
dm: core: Update docs about oftree_from_fdt()
by Simon Glass
· Tue Oct 11 09:47:19 2022 -0600
386d05d
vbe: Add fixups for a basic set of OS requests
by Simon Glass
· Tue Oct 11 09:47:18 2022 -0600
1b035c1
test: Move common FIT code into a separate fit_util file
by Simon Glass
· Tue Oct 11 09:47:17 2022 -0600
571707b
boot: Tidy up logging and naming in vbe_simple
by Simon Glass
· Tue Oct 11 09:47:16 2022 -0600
f4ff703
boot: Pass the correct FDT to the EVT_FT_FIXUP event
by Simon Glass
· Tue Oct 11 09:47:15 2022 -0600
7514fd7
sandbox: Support FDT fixups
by Simon Glass
· Tue Oct 11 09:47:14 2022 -0600
8025346
bootstd: Move VBE setup into a shared function
by Simon Glass
· Tue Oct 11 09:47:13 2022 -0600
84328cf
fdt: Show a message when the working FDT changes
by Simon Glass
· Tue Oct 11 09:47:12 2022 -0600
3862fab
fs: Quieten down the filesystems more
by Simon Glass
· Tue Oct 11 09:47:11 2022 -0600
8169ece
boot: Correct handling of addresses in boot_relocate_fdt()
by Simon Glass
· Tue Oct 11 09:47:10 2022 -0600
975dd8a
bootm: Drop #ifdef from do_bootm()
by Simon Glass
· Tue Oct 11 09:47:09 2022 -0600
1b89370
bootm: Avoid returning error codes from command
by Simon Glass
· Tue Oct 11 09:47:08 2022 -0600
b90cf90
bootm: Change incorrect 'unsupported' error
by Simon Glass
· Tue Oct 11 09:47:07 2022 -0600
93a85dc
dm: core: Switch uclass_*_device_err to use uclass_*_device_check
by Michal Suchanek
· Wed Oct 12 21:58:06 2022 +0200
53beee9
dm: core: Switch uclass_foreach_dev_probe to use simple iterator
by Michal Suchanek
· Wed Oct 12 21:58:05 2022 +0200
558e9f2
mpc83xx: gazerbeam: Update sysinfo_get error handling
by Michal Suchanek
· Wed Oct 12 21:58:04 2022 +0200
050aa36
net: eth-uclass: Do not set device on error
by Michal Suchanek
· Wed Oct 12 21:58:02 2022 +0200
ac9e9fc
dm: blk: Do not use uclass_next_device_err
by Michal Suchanek
· Wed Oct 12 21:58:01 2022 +0200
93ccce5
dm: treewide: Use uclass_next_device_err when accessing second device
by Michal Suchanek
· Wed Oct 12 21:58:00 2022 +0200
ac12a2f
dm: treewide: Use uclass_first_device_err when accessing one device
by Michal Suchanek
· Wed Oct 12 21:57:59 2022 +0200
1d524ae
cmd: List all uclass devices regardless of probe error
by Michal Suchanek
· Wed Oct 12 21:57:58 2022 +0200
55b6966
w1: Fix bus counting in w1_get_bus
by Michal Suchanek
· Wed Oct 12 21:57:57 2022 +0200
b9813e2
video: ipuv3: Fix error handling when getting the display
by Michal Suchanek
· Wed Oct 12 21:57:56 2022 +0200
73ba676
stdio: Fix class iteration in stdio_add_devices()
by Michal Suchanek
· Wed Oct 12 21:57:55 2022 +0200
a18b6a5
usb: ether: Fix error handling in usb_ether_init
by Michal Suchanek
· Wed Oct 12 21:57:54 2022 +0200
675e908
bootstd: Fix listing boot devices
by Michal Suchanek
· Wed Oct 12 21:57:53 2022 +0200
Next »