Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 323dad429f92dc9f0cb4f8b29cbfc6fc2aee3458
  1. 323dad4 axs103: Support slave core kick-start on axs103 v1.1 firmware by Alexey Brodkin · Fri Mar 31 11:14:35 2017 +0300
  2. ef5b517 axs103: Clean-up smp_kick_all_cpus() by Alexey Brodkin · Thu Mar 30 19:18:30 2017 +0300
  3. 55bab63 Merge git://git.denx.de/u-boot-arc by Tom Rini · Fri Mar 24 08:19:30 2017 -0400
  4. a465df7 arc: use timer driver for ARC boards by Vlad Zakharov · Tue Mar 21 14:49:49 2017 +0300
  5. a7a6749 arc: dts: separate single axs10x.dts file by Vlad Zakharov · Tue Mar 21 14:49:48 2017 +0300
  6. bcdbfcd Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · Fri Mar 24 07:21:57 2017 -0400
  7. 8f2c1da drivers: timer: Introduce ARC timer driver by Vlad Zakharov · Tue Mar 21 14:49:47 2017 +0300
  8. 070b12d Merge git://git.denx.de/u-boot-dm by Tom Rini · Thu Mar 23 12:19:07 2017 -0400
  9. fb60594 arm: mvebu: Add gdsys ControlCenter-Compact board by Dirk Eibach · Wed Feb 22 16:07:23 2017 +0100
  10. 7e9b9d6 dm: Add callback to modify the device tree by mario.six@gdsys.cc · Wed Feb 22 16:07:22 2017 +0100
  11. 2816a63 arm: mvebu: theadorable: Add 'pcie' test command by Stefan Roese · Fri Mar 10 15:40:32 2017 +0100
  12. a60ceb8 arm: mvebu: theadorable: Add board-specific PEX detection pulse width by Stefan Roese · Fri Mar 10 15:40:31 2017 +0100
  13. 2051d8c arm: mvebu: AXP: Add possiblity to configure PEX detection pulse width by Stefan Roese · Fri Mar 10 15:40:30 2017 +0100
  14. 2baca3b arm64: a37xx: Remove DM_I2C_COMPAT from the board config by Konstantin Porotchkin · Thu Feb 16 13:52:33 2017 +0200
  15. b65ffc4 arm64: a37xx: Disable DB configurations on ESPRESSOBin board by Konstantin Porotchkin · Thu Feb 16 13:52:32 2017 +0200
  16. 5d91c3d arm64: mvebu: Add default config for ESPRESSOBin board by Konstantin Porotchkin · Thu Feb 16 13:52:31 2017 +0200
  17. 814009f arm64: dts: Add device tree for ESPRESSOBin board by Konstantin Porotchkin · Thu Feb 16 13:52:30 2017 +0200
  18. f4d32b4 mvebu: a37xx: Add init for ESPRESSBin Topaz switch by Konstantin Porotchkin · Thu Feb 16 13:52:29 2017 +0200
  19. 95d0af3 mvebu: neta: a37xx: Add fixed link support to neta driver by Konstantin Porotchkin · Thu Feb 16 13:52:28 2017 +0200
  20. fb8e202 mvebu: neta: Add support for board init function by Konstantin Porotchkin · Thu Feb 16 13:52:27 2017 +0200
  21. cfa88a3 arm64: a37xx: Handle pin controls in early board init by Konstantin Porotchkin · Thu Feb 16 13:52:26 2017 +0200
  22. 4afb743 arm64: a37xx: dts: Add pin control nodes to DT by Konstantin Porotchkin · Thu Feb 16 13:52:25 2017 +0200
  23. a243a3c arm64: a37xx: Enable bubt command support on A3720-DB by Konstantin Porotchkin · Thu Feb 16 13:52:24 2017 +0200
  24. 8be1cfb arm64: a37xx: Enable Marvell ETH PHY support by Konstantin Porotchkin · Thu Feb 16 13:52:23 2017 +0200
  25. 7f8dfea arm64: mvebu: Rename the db-88f3720 to armada-37xx platform by Konstantin Porotchkin · Thu Feb 16 13:52:22 2017 +0200
  26. 1b5ed4d mvebu: usb: xhci: Add VBUS regulator supply to the host driver by Konstantin Porotchkin · Sun Feb 12 11:10:30 2017 +0200
  27. 472ab52 arm64: mvebu: Add default configuraton for MACCHIATOBin board by Konstantin Porotchkin · Thu Feb 09 12:39:37 2017 +0200
  28. 089bada arm64: mvebu: dts: Add DTS file for MACCHIATOBin board by Rabeeh Khoury · Thu Feb 09 12:39:10 2017 +0200
  29. 4eb09cd mvebu: pcie: Add support for GPIO reset for PCIe device by Konstantin Porotchkin · Wed Feb 08 17:34:13 2017 +0200
  30. 84727d0 arm64: mvebu: dts: Add i2c1 pin definitions to CPM by Konstantin Porotchkin · Wed Feb 08 17:34:12 2017 +0200
  31. b580999 arm64: mvebu: gpio: Add GPIO nodes to A8K family devices by Konstantin Porotchkin · Wed Feb 08 17:34:11 2017 +0200
  32. f31ca1e dtoc: make ScanTree recurse into subnodes by Philipp Tomsich · Wed Feb 22 19:06:04 2017 +0100
  33. 931b1f2 drivers: ti_qspi: use syscon to get the address ctrl_mod_mmap register by Jean-Jacques Hiblot · Mon Feb 13 16:17:49 2017 +0100
  34. 024611b regmap: use fdt address translation by Jean-Jacques Hiblot · Mon Feb 13 16:17:48 2017 +0100
  35. 02ba17f dm: core: Fix Handling of global_data moving in SPL by Lokesh Vutla · Mon Feb 13 09:21:22 2017 +0530
  36. 35a825d Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · Tue Mar 21 14:10:15 2017 -0400
  37. 0737541 mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver by Stefan Roese · Mon Mar 20 17:00:32 2017 +0100
  38. 66702b5 mmc: drop unnecessary send_status request by Xu Ziyuan · Sun Mar 12 14:19:04 2017 +0800
  39. 002b4fa mmc: sdhci: only flush cache for data command by Kevin Liu · Wed Mar 08 15:16:44 2017 +0800
  40. b756760 mmc: tangier: Add Intel Tangier eMMC/SDHCI driver by Felipe Balbi · Mon Feb 20 14:24:14 2017 +0300
  41. ecf7dfd mmc: pci: Add CONFIG_MMC_PCI by Felipe Balbi · Mon Feb 20 14:24:13 2017 +0300
  42. ac366d8 configs: am43xx_evm: Enable SPL_DM by Lokesh Vutla · Tue Feb 21 11:40:44 2017 +0530
  43. 493368d ARM: AM43xx: Enable DM_I2C/SPI/ETH by Lokesh Vutla · Tue Feb 21 11:40:43 2017 +0530
  44. 895bd20 ARM: dts: am43xx: Add u-boot specific dtsi by Lokesh Vutla · Tue Feb 21 11:40:42 2017 +0530
  45. 7ee789d configs: dra7xx_evm: Enable SPL_DM by Lokesh Vutla · Fri Feb 10 20:37:20 2017 +0530
  46. d13d9eb configs: am57xx_evm: Enable SPL_DM by Lokesh Vutla · Fri Feb 10 20:37:19 2017 +0530
  47. 3f33218 ARM: dts: OMAP5+: Add u-boot specific dtsi by Lokesh Vutla · Fri Feb 10 20:37:18 2017 +0530
  48. 74f1f0c ARM: OMAP2+: define _image_binary_end to fix SPL_OF_CONTROL by Lokesh Vutla · Fri Feb 10 20:37:17 2017 +0530
  49. 89ea21e spl: Correct call to spl_common_init() with SPL_STACK_R_MALLOC_SIMPLE_LEN by Tom Rini · Mon Mar 20 14:19:27 2017 -0400
  50. d59b586 board: ns2: Add support for Broadcom Northstar 2 by Jon Mason · Fri Mar 17 12:12:14 2017 -0400
  51. a49b7b3 da850: Add instructions to copy AIS image to NAND by ahaslam@baylibre.com · Fri Mar 17 16:55:23 2017 +0100
  52. 3885717 Pass empty CFLAGS on invocation of libfdt/setup.py by Max Filippov · Thu Mar 16 15:23:55 2017 -0700
  53. 7bb238e Kconfig: Don't use RSA_FREESCALE_EXP on IMX by George McCollister · Thu Mar 16 16:17:06 2017 -0500
  54. 21bc35e ARM: am43xx: fix SOC revision print outs by Tero Kristo · Thu Mar 16 09:48:54 2017 +0200
  55. 8445f73 test-fit.py: Minor grammar/spelling/clarification tweaks by Robert P. J. Day · Mon Mar 13 06:50:55 2017 -0400
  56. 842ac3f part_efi: document device-tree binding for part_efi configuration by Philipp Tomsich · Wed Mar 01 21:10:41 2017 +0100
  57. b357fe4 doc: move documentation for /config node into a separate file by Philipp Tomsich · Wed Mar 01 21:10:40 2017 +0100
  58. a3da0e9 part_efi: support padding between the GPT header and partition entries by Philipp Tomsich · Wed Mar 01 21:10:39 2017 +0100
  59. 0c61d1b net: don't override ethernet address environment by Roger Quadros · Mon Mar 13 15:04:33 2017 +0200
  60. 601ab90 ARM: k2g: setup PRU ethernet MAC addresses by Roger Quadros · Mon Mar 13 15:04:32 2017 +0200
  61. 7ff8e7c ARM: Use Kconfig for board EEPROM's I2C bus and chip address by Roger Quadros · Mon Mar 13 15:04:31 2017 +0200
  62. d0f399c board: ti: am57xx-idk: Auto detect LCD Panel by Nishanth Menon · Mon Mar 13 15:04:30 2017 +0200
  63. d2b9b02 board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet by Roger Quadros · Mon Mar 13 15:04:29 2017 +0200
  64. 2613059 board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD by Roger Quadros · Mon Mar 13 15:04:28 2017 +0200
  65. 44c7d9a ti: common: board_detect: commodify ethaddr environment setting code by Roger Quadros · Tue Mar 14 15:04:19 2017 +0200
  66. 29f7313 ti_armv7_keystone2: Define scratch space in SRAM by Franklin S Cooper Jr · Mon Mar 13 15:04:26 2017 +0200
  67. 5f60f41 ti: common: board_detect: Rename EEPROM scratch start macro by Lokesh Vutla · Mon Mar 13 15:04:25 2017 +0200
  68. 3ca5070 ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro by Roger Quadros · Mon Mar 13 15:04:24 2017 +0200
  69. 6880bdc travis-ci: Re-work i.MX6 jobs, clarify Freescale and AArch64 by Tom Rini · Mon Mar 20 10:21:27 2017 -0400
  70. e0e319a ti: boot: Register the MMC controllers in SPL in the same way as in u-boot by Jean-Jacques Hiblot · Wed Feb 01 11:39:14 2017 +0100
  71. 40d97bd Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · Sun Mar 19 14:49:26 2017 -0400
  72. 29c8bc0 Kconfig: Migrate CONFIG_BAUDRATE by Philipp Tomsich · Fri Mar 17 20:34:53 2017 +0100
  73. bd1c99c imx: ventana: add EMMC configuration by Tim Harvey · Mon Mar 13 08:51:09 2017 -0700
  74. 2687474 tools: imximage: add set bit command by Peng Fan · Thu Mar 16 14:35:06 2017 +0800
  75. d53c0a4 ARM: vf610: move to standard arch/board approach by Stefan Agner · Mon Mar 13 18:41:36 2017 -0700
  76. d7babd4 imx: ventana: make SD3_VSELECT board specific by Tim Harvey · Mon Mar 13 08:51:08 2017 -0700
  77. 9b9e75f imx: ventana: make OTG VBUS power enable board specific by Tim Harvey · Mon Mar 13 08:51:07 2017 -0700
  78. fd6f239 imx: ventana: fix hwconfig by Tim Harvey · Mon Mar 13 08:51:06 2017 -0700
  79. 6ea02c9 imx: ventana: change name of rs232_en to indicate polarity by Tim Harvey · Mon Mar 13 08:51:05 2017 -0700
  80. bb7e6b1 imx: ventana: use mmc_root in boot scripts by Tim Harvey · Mon Mar 13 08:51:04 2017 -0700
  81. 84ae191 imx: ventana: move mmc_init to common by Tim Harvey · Mon Mar 13 08:51:03 2017 -0700
  82. 49dafa5 imx: ventana: config: add gzwrite support by Tim Harvey · Mon Mar 13 08:51:02 2017 -0700
  83. 49a3c2c imx: ventana: add additional DRAM configurations by Tim Harvey · Mon Mar 13 08:51:01 2017 -0700
  84. 1575b54 colibri_imx7: split and resize firmware MTD partition by Stefan Agner · Thu Mar 09 17:17:55 2017 -0800
  85. 6a66748 colibri_imx7: use device-tree for MTD partitions by Stefan Agner · Thu Mar 09 17:17:54 2017 -0800
  86. 0f2c5ad colibri_imx7: setup PMIC sleep mode configuration by Stefan Agner · Thu Mar 09 17:17:53 2017 -0800
  87. 443166e colibri_imx7: implement board level USB PHY mode by Stefan Agner · Thu Mar 09 17:17:52 2017 -0800
  88. 35eebee colibri_imx7/colibri_imx6/apalis_imx6: limit bootm memory by Stefan Agner · Thu Mar 09 17:17:51 2017 -0800
  89. 60dbb64 toradex apalis/colibri: add device tree overlay support by Stefan Agner · Thu Mar 09 17:17:50 2017 -0800
  90. 088ca1e toradex apalis/colibri: use common USB product id fallback by Stefan Agner · Thu Mar 09 17:17:49 2017 -0800
  91. 3a79758 mx7: Add 1.2GHz speed grade entry by Fabio Estevam · Wed Feb 22 12:43:27 2017 -0300
  92. a296ef5 mx7: Fix the get_cpu_speed_grade_hz() return values by Fabio Estevam · Wed Feb 22 12:43:26 2017 -0300
  93. 24fc0e6 mx7: Fix speed grade entry by Fabio Estevam · Wed Feb 22 12:43:25 2017 -0300
  94. 84646a7 arm: dts: imx6ul: add usbotg aliases by Sébastien Szymanski · Wed Feb 22 15:38:44 2017 +0100
  95. a7762e4 arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier board by Sébastien Szymanski · Tue Mar 07 14:33:25 2017 +0100
  96. e3b8d39 dm: imx: serial: add i.MX6UL support by Sébastien Szymanski · Tue Mar 07 14:33:24 2017 +0100
  97. d01bf66 MCCMON6: defconfig: Move 'quiet' console parameter to 'console' env variable by Lukasz Majewski · Tue Feb 21 22:45:20 2017 +0100
  98. 1c640a6 arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD by Tom Rini · Sat Mar 18 09:01:44 2017 -0400
  99. 1c97f1e Kconfig: Disable non-FIT SPL loading for TI secure devices by Andrew F. Davis · Thu Feb 16 11:18:40 2017 -0600
  100. 7463034 spl: Add option to enable SPL Legacy image support by Andrew F. Davis · Thu Feb 16 11:18:39 2017 -0600