Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 2b9d163491c018bdb14403a44e1d8ddc6ec0710b / drivers
  1. 2b9d163 usb: gadget: ether: populate _reset_ callback by Kishon Vijay Abraham I · Wed Aug 19 13:49:48 2015 +0530
  2. 9cceb95 usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop by Kishon Vijay Abraham I · Wed Aug 19 13:49:47 2015 +0530
  3. 8db2520 usb: gadget: ether: Perform board initialization from ethernet gadget driver by Kishon Vijay Abraham I · Wed Aug 19 13:49:46 2015 +0530
  4. 65bb454 usb: xhci: Fix a potential NULL pointer dereference by Sergey Temerkhanov · Mon Aug 17 15:38:07 2015 +0300
  5. 64bbb7d usb: spear: Add support for both SPEAr600 EHCI controllers by Stefan Roese · Tue Aug 18 09:27:18 2015 +0200
  6. c52eb1c imx: usb: ehci-mx6: wait_for_bit to check reg status by Adrian Alonso · Thu Aug 06 15:46:03 2015 -0500
  7. f31599f imx: usb: ehci-mx6: add usb support for imx7d soc by Adrian Alonso · Thu Aug 06 15:43:17 2015 -0500
  8. 14dfbbb imx: usb: ehci-mx6: document board specific functions by Adrian Alonso · Thu Aug 06 15:43:16 2015 -0500
  9. aee79b4 imx: usb: ehci-mx6: reg accessor cleanups by Adrian Alonso · Thu Aug 06 15:43:15 2015 -0500
  10. 366b24f of: clean up OF_CONTROL ifdef conditionals by Masahiro Yamada · Wed Aug 12 07:31:55 2015 +0900
  11. 04aa00d dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list by Masahiro Yamada · Wed Aug 12 07:31:52 2015 +0900
  12. 8f4338a led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries by Masahiro Yamada · Wed Aug 12 07:31:51 2015 +0900
  13. 645dbd6 led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED by Masahiro Yamada · Wed Aug 12 07:31:50 2015 +0900
  14. 8c0f0db ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries by Masahiro Yamada · Wed Aug 12 07:31:49 2015 +0900
  15. 2ba7a8c ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM by Masahiro Yamada · Wed Aug 12 07:31:48 2015 +0900
  16. 200812b clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries by Masahiro Yamada · Wed Aug 12 07:31:47 2015 +0900
  17. b16de45 clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK by Masahiro Yamada · Wed Aug 12 07:31:46 2015 +0900
  18. 95fc4ff dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries by Masahiro Yamada · Wed Aug 12 07:31:45 2015 +0900
  19. 39ba4b1 spl: move SPL driver entries to driver/Makefile by Masahiro Yamada · Wed Aug 12 07:31:44 2015 +0900
  20. 714642d i2c: lpc32xx: correct sanity check for requested bus speed by Vladimir Zapolskiy · Wed Aug 12 20:22:13 2015 +0300
  21. 890cc77 usb: lpc32xx: add host USB driver by Sylvain Lemieux · Thu Aug 13 15:40:22 2015 -0400
  22. fb51abb i2c: lpc32xx: add support for OTG I2C by Sylvain Lemieux · Tue Aug 04 17:04:41 2015 -0400
  23. 416e10d nand: lpc32xx: add ECC layout for small page NAND by Sylvain Lemieux · Thu Aug 13 15:40:21 2015 -0400
  24. e72017a nand: lpc32xx: add hardware ECC support by Sylvain Lemieux · Thu Aug 13 15:40:20 2015 -0400
  25. 90a837f dma: lpc32xx: add DMA driver by Sylvain Lemieux · Mon Aug 10 08:16:31 2015 -0400
  26. 9c09d39 Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · Tue Aug 18 08:25:24 2015 -0400
  27. b537707 Merge branch 'master' of git://git.denx.de/u-boot-samsung by Tom Rini · Tue Aug 18 08:24:32 2015 -0400
  28. a5bba8d spi: ti_qspi: Use DMA to read from qspi flash by Vignesh R · Mon Aug 17 15:20:13 2015 +0530
  29. fbe1909 dma: ti-edma3: Add helper function to support edma3 transfer by Vignesh R · Mon Aug 17 13:29:55 2015 +0530
  30. 4fe4470 sf: ops: Add spi_flash_copy_mmap function by Tom Rini · Mon Aug 17 13:29:54 2015 +0530
  31. 41c1f4a ti: qspi: set flash quad bit based on quad support flag by vishalm@ti.com · Mon Aug 17 10:47:51 2015 -0500
  32. 98530e9 pci: mvebu: Add PCIe driver by Anton Schubert · Tue Aug 11 11:54:01 2015 +0200
  33. f3345e6 arm: mvebu: Add complete SDRAM ECC scrubbing by Stefan Roese · Thu Aug 06 14:43:13 2015 +0200
  34. 11b8ebf arm: mvebu: add multiple usb-hostcontroller support for AXP by Anton Schubert · Thu Jul 23 15:02:09 2015 +0200
  35. f43d323 arm: mvebu: Enable USB EHCI support on Armada XP by Stefan Roese · Wed Jul 22 18:26:13 2015 +0200
  36. badccc3 arm: mvebu: Enable NAND controller on MVEBU SoC's by Stefan Roese · Thu Jul 16 10:40:05 2015 +0200
  37. e4a0f27 arm: mvebu: sdram: Enable ECC support on Armada XP by Stefan Roese · Tue Aug 11 17:08:01 2015 +0200
  38. 2e6300f i2c: lpc32xx: fix write timeout by Sylvain Lemieux · Mon Jul 27 13:37:39 2015 -0400
  39. dcdd925 i2c: lpc32xx: fix read timeout by Sylvain Lemieux · Mon Jul 27 13:37:38 2015 -0400
  40. e071cd7 i2c: lpc32xx: use api to get hclk instead of fix value by Sylvain Lemieux · Mon Jul 27 13:37:37 2015 -0400
  41. e0bdcb8 sf: Make 4K sector support configurable by Marek Vasut · Mon Aug 03 01:28:56 2015 +0200
  42. 74f8486 ARM: exynos: move SoC sources to mach-exynos by Thomas Abraham · Mon Aug 03 17:58:00 2015 +0530
  43. 4b2c9d5 Merge git://git.denx.de/u-boot-x86 by Tom Rini · Fri Aug 14 13:43:23 2015 -0400
  44. 057e078 Merge branch 'master' of git://git.denx.de/u-boot-pmic by Tom Rini · Fri Aug 14 11:37:48 2015 -0400
  45. 932adc6 video: vesa: Correct a typo in the Kconfig VESA mode string by Bin Meng · Sun Aug 09 23:26:59 2015 -0700
  46. 27517b3 Revert "dm: pci: Allow scan bridge child devices before relocation" by Simon Glass · Mon Aug 10 20:54:52 2015 -0600
  47. 6f4f6d2 Add missing part of: "power: pmic: pfuze100 support driver model" by Peng Fan · Fri Aug 14 11:36:16 2015 +0200
  48. 04c8b6a dm: pci: Add a way to iterate through all PCI devices by Simon Glass · Mon Aug 10 07:05:04 2015 -0600
  49. 94ef242 dm: pci: Provide friendly config access functions by Simon Glass · Mon Aug 10 07:05:03 2015 -0600
  50. 91f1b82 sunxi: Display: Add support for eDP panels connected via an anx9804 bridge by Hans de Goede · Sat Aug 08 16:13:53 2015 +0200
  51. dfc1efe video: Add support for the ANX9804 parallel lcd to dp bridge chip by Hans de Goede · Sat Aug 08 16:03:29 2015 +0200
  52. 1336578 sun6i: display: Add support for using the mipi pll as lcd clock source by Hans de Goede · Sat Aug 08 14:08:21 2015 +0200
  53. 167c8a1 sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster by Hans de Goede · Thu Aug 06 20:10:20 2015 +0200
  54. 8a195ca sunxi: display: Fix composite video out on sun5i by Hans de Goede · Thu Aug 06 12:08:33 2015 +0200
  55. d955f44 sunxi: display: Add overscan correction by Hans de Goede · Wed Aug 05 00:06:47 2015 +0200
  56. a8287e7 cfbconsole: Add support for stride != width by Hans de Goede · Tue Aug 04 12:15:39 2015 +0200
  57. b922f78 cfbconsole: Remove width argument from the logo functions by Hans de Goede · Tue Aug 04 12:21:40 2015 +0200
  58. cdbf208 tegra: nand: disable subpage writes by Marcel Ziswiler · Thu Aug 06 00:47:13 2015 +0200
  59. d5c6922 mtd/nand/tegra: alignment workaround by Marcel Ziswiler · Thu Aug 06 00:47:06 2015 +0200
  60. df13b14 tegra: nand: fix read_byte required for proper onfi detection by Marcel Ziswiler · Thu Aug 06 00:47:05 2015 +0200
  61. d5de688 Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · Thu Aug 13 07:20:44 2015 -0400
  62. 25624f9 net: lpc32xx: eth buffers base config by Sylvain Lemieux · Mon Jul 27 13:37:40 2015 -0400
  63. 4f62bc1 Merge branch 'master' of git://git.denx.de/u-boot-net by Tom Rini · Wed Aug 12 15:46:36 2015 -0400
  64. 923c207 mmc_spi: Big-endian support by Yoshinori Sato · Mon Jun 01 15:22:37 2015 +0900
  65. 6133efa dw_mmc: Calculate dwmmc FIFO threshold size if not provided by Simon Glass · Thu Aug 06 20:16:29 2015 -0600
  66. e33af1c dra7xx: Add dra72_evm_defconfig using CONFIG_DM by Tom Rini · Fri Jul 31 19:55:12 2015 -0400
  67. 7bc2bca gpio: omap: Drop 'method' parameter by Tom Rini · Fri Jul 31 19:55:09 2015 -0400
  68. e343afb mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xx by Nikita Kiryanov · Thu Jul 30 23:56:21 2015 +0300
  69. 5ffdd85 mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xx by Nikita Kiryanov · Thu Jul 30 23:56:20 2015 +0300
  70. 8fb39c4 spi: omap3_spi: add am43xx support to omap3_spi by Nikita Kiryanov · Thu Jul 30 23:56:18 2015 +0300
  71. af0c1be mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller. by Peter Griffin · Thu Jul 30 18:55:22 2015 +0100
  72. a2af734 pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board. by Peter Griffin · Thu Jul 30 18:55:21 2015 +0100
  73. d267688 dm: gpio: hi6220: Add a hi6220 GPIO driver model driver. by Peter Griffin · Thu Jul 30 18:55:18 2015 +0100
  74. c385714 usb: ohci: enable cache support by Wu, Josh · Mon Jul 27 11:40:18 2015 +0800
  75. 9c078c3 Correct License and Copyright information on few files by Ruchika Gupta · Mon Jul 27 09:07:39 2015 +0530
  76. cc85b7b drivers: hierarchize drivers Kconfig menu by Masahiro Yamada · Sun Jul 26 02:46:26 2015 +0900
  77. 76fac50 dwc2: Add dcache support by Alexander Stein · Fri Jul 24 09:22:14 2015 +0200
  78. c56c947 ARM: bcm283x: Allocate all mailbox buffers cacheline aligned by Alexander Stein · Fri Jul 24 09:22:12 2015 +0200
  79. 9397fbe input: twl4030: Keypad scan and input by Paul Kocialkowski · Mon Jul 20 15:17:09 2015 +0200
  80. f266dae input: TWL4030 input support for power button, USB and charger by Paul Kocialkowski · Mon Jul 20 15:17:08 2015 +0200
  81. 8264e14 power: twl4030: Power off support by Paul Kocialkowski · Mon Jul 20 15:17:07 2015 +0200
  82. 78f04f0 nand: lpc32xx: add SLC NAND controller support by Vladimir Zapolskiy · Sat Jul 18 03:07:52 2015 +0300
  83. cb8183d spl: nand: simple: replace readb() with chip specific read_buf() by Vladimir Zapolskiy · Sat Jul 18 01:47:08 2015 +0300
  84. 311aef6 nand, atmel: remove udelay in spl_nand_erase_one() by Heiko Schocher · Mon Jun 29 09:10:47 2015 +0200
  85. 497c731 net: e1000: Increase autoneg timeout to 8 seconds by Stefan Roese · Tue Aug 11 17:12:44 2015 +0200
  86. 7fc93c4 dm: pmic: max77686: Correct two typos in a comment by Simon Glass · Sun Aug 09 09:10:57 2015 -0600
  87. e4cbfa6 power: regulator: max77686 correct variable type by Peng Fan · Tue Jul 28 22:47:08 2015 +0800
  88. 54ee6a4 power: regulator: add pfuze100 support by Peng Fan · Fri Aug 07 16:43:45 2015 +0800
  89. c57f4e1 power: pmic: pfuze100 support driver model by Peng Fan · Fri Aug 07 16:43:44 2015 +0800
  90. cd672d4 power: regulator use node name when no regulator-name by Peng Fan · Fri Aug 07 16:43:42 2015 +0800
  91. 4c9b948 mmc: dw_mmc: Avoid using printf() for errors by Simon Glass · Thu Aug 06 20:16:27 2015 -0600
  92. 68c2fd7 net: phy: broadcom: Add BCM Cygnus PHY by Jiandong Zheng · Wed Jul 15 16:28:13 2015 -0700
  93. 71b1d86 net: phy: delay only if reset handler is registered by Jörg Krause · Wed Jul 15 15:18:22 2015 +0200
  94. 8700a3d net: phy: fix data type of phy_id by Jörg Krause · Wed Jul 15 14:58:49 2015 +0200
  95. fdbc5c7 qoriq eth.c bugfix: handle received corrupted frames correctly by Daniel Inderbitzin · Fri Jul 10 14:06:02 2015 +0200
  96. 8bffd71 net: lpc32xx: add RMII phy mode support by Vladimir Zapolskiy · Mon Jul 06 07:22:11 2015 +0300
  97. e7d729f net: lpc32xx: improve MAC configuration on reset and initialization by Vladimir Zapolskiy · Mon Jul 06 07:22:10 2015 +0300
  98. ca0af03 net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id by Vladimir Zapolskiy · Mon Jun 29 03:35:12 2015 +0300
  99. 8884ced net: lpc32xx: correct command register reset value by Vladimir Zapolskiy · Sun Jun 28 06:03:38 2015 +0300
  100. 8938b5b net: davinci_emac: don't teardown inactive rx channel by Jeroen Hofstee · Sun Jun 07 17:30:38 2015 +0200