Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 1c79617daeecb34222a7242066131426151b8f11 / include / asm-arm
  1. bfeb0fd NAND: DaVinci: V2 Adding 4 BIT ECC support by Sandeep Paulraj · Tue Aug 18 10:10:42 2009 -0400
  2. a8fb987 omap3: Fixed a problem with hwecc by Ben Goska · Fri Aug 14 10:03:36 2009 -0700
  3. 2344455 Monahans: avoid floating point calculations by Wolfgang Denk · Sun Aug 16 23:40:13 2009 +0200
  4. 9dc8ffd OMAP3: Fix missing GPMC_CONFIG_CS0_BASE by Dirk Behme · Sat Aug 08 12:46:09 2009 +0200
  5. 1ed4ae0 mxc-mmc: sdhc host driver for MX2 and MX3 proccessor by Ilya Yanok · Mon Jun 08 04:12:49 2009 +0400
  6. cf4fb70 kirkwood/gpio.h: remove duplicate definition by Alessandro Rubini · Fri Aug 07 12:35:47 2009 +0200
  7. 0f58db5 omap3: use only fixed-size types inside ctrl_structs by Dirk Behme · Sat Aug 08 09:30:23 2009 +0200
  8. dc7af20 omap3: remove typedefs for configuration structs by Dirk Behme · Sat Aug 08 09:30:21 2009 +0200
  9. e06da3d omap3: embedd gpmc_cs into gpmc config struct by Matthias Ludwig · Tue May 19 09:09:31 2009 +0200
  10. 727e417 pxa: Fix typo in GCDR(x) by David Hunter · Thu Jul 30 14:32:49 2009 -0700
  11. 9444ff1 arm nomadik: add gpio support by Alessandro Rubini · Fri Jul 24 11:27:03 2009 +0200
  12. 271fdee OMAP3 Remove twl4030 defines by Tom Rix · Sun Jun 28 12:52:32 2009 -0500
  13. 03b2a74 OMAP I2C Fix the sampling clock. by Tom Rix · Sun Jun 28 12:52:27 2009 -0500
  14. f70f342 arm, kirkwood: added kw_gpio_set_valid() in gpio.h by Heiko Schocher · Thu Jul 16 09:58:31 2009 +0200
  15. e740eb8 Kirkwood: add Marvell Kirkwood gpio driver by Dieter Kiermaier · Mon Jun 29 14:45:08 2009 +0200
  16. 60e286b arm, kirkwood: added KW_TWSI_BASE in kirkwood.h by Heiko Schocher · Thu Jul 16 09:59:10 2009 +0200
  17. 989301e Add unaligned.h for arm by Simon Kagstrom · Tue Jul 07 13:58:51 2009 +0200
  18. ff2bbaa Merge branch 'asm-generic' of git://git.denx.de/u-boot-microblaze by Wolfgang Denk · Thu Jul 16 21:53:15 2009 +0200
  19. bf77bdd Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · Mon Jul 13 23:45:02 2009 +0200
  20. 97a031b at91: Introduction of at91sam9g10 SOC. by Sedji Gaouaou · Thu Jun 25 17:04:15 2009 +0200
  21. 538566d at91: Introduction of at91sam9g45 SOC. by Sedji Gaouaou · Thu Jul 09 10:16:29 2009 +0200
  22. b7e6abd pxa: fix CKEN_B register bits by Daniel Mack · Tue Jun 23 17:30:05 2009 +0200
  23. 96e9e39 pxa: add clock for system bus 2 arbiter by Daniel Mack · Tue Jun 23 17:30:04 2009 +0200
  24. 6761b62 arm: Kirkwood: bugfix: UART1 bar correction by Prafulla Wadaskar · Mon Jul 06 15:50:47 2009 +0530
  25. 88c12e0 asm-generic: Consolidate errno.h to asm-generic/errno.h by Michal Simek · Tue Jun 30 23:47:30 2009 +1000
  26. f4b0b9d davinci_nand chipselect/init cleanup by David Brownell · Sun May 10 15:43:01 2009 -0700
  27. adb8005 NAND DaVinci: Update to ALE/CLE Mask values by Sandeep Paulraj · Sat May 09 12:35:20 2009 -0400
  28. d4aa113 ARM DaVinci: Changing ALE Mask Value by Sandeep Paulraj · Wed Apr 29 09:47:09 2009 -0400
  29. 962d4c1 davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC) by David Brownell · Tue Apr 28 13:19:53 2009 -0700
  30. 0bf53c4 davinci_nand: cleanup I (minor) by David Brownell · Tue Apr 28 13:19:50 2009 -0700
  31. 1d695be Coding style cleanup; update CHANGELOG by Wolfgang Denk · Tue Jul 07 22:35:02 2009 +0200
  32. 24f8b41 MX31: Add NAND SPL boot support to i.MX31 PDK board. by Magnus Lilja · Sat Jul 04 10:31:24 2009 +0200
  33. ecb1b02 arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support by Prafulla Wadaskar · Mon Jun 29 20:55:54 2009 +0530
  34. de37375 arm nomadik: use 1000 as HZ value and rewrite timer code by Alessandro Rubini · Mon Jun 29 10:52:37 2009 +0200
  35. 5f9c3d6 ARM: Update mach-types by Jean-Christophe PLAGNIOL-VILLARD · Tue Jun 30 21:03:35 2009 +0200
  36. 96d1b47 at91: Add CAN init function by Daniel Gorsulowski · Tue Jun 30 23:03:33 2009 +0200
  37. 93d033b arm: Kirkwood: Correct header define by Simon Kagstrom · Tue Jun 30 23:03:31 2009 +0200
  38. 6eeb6f7 MX31: Add basic support for Freescale i.MX31 PDK board. by Magnus Lilja · Wed Jul 01 01:07:55 2009 +0200
  39. 3b5ac95 move L2 cache enable/disable function to cache.c in the omap3 SoC directory by Kim, Heung Jun · Sat Jun 20 11:02:17 2009 +0200
  40. a09bbe5 arm: Kirkwood: Basic SOCs support by Prafulla Wadaskar · Sat Jun 20 11:01:53 2009 +0200
  41. e565fda arm: generic cache.h for ARM architectures by Prafulla Wadaskar · Sat Jun 20 11:01:52 2009 +0200
  42. 336d69d OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change by Matthias Ludwig · Sat Jun 20 11:01:50 2009 +0200
  43. 1fd6a9b spi: Add Marvell Kirkwood SPI driver by Prafulla Wadaskar · Sat May 30 01:13:33 2009 +0530
  44. 416a41f mx27: basic cpu support by Ilya Yanok · Mon Jun 08 04:12:45 2009 +0400
  45. 1763531 i.MX31: Create a common device file. by Magnus Lilja · Sat Jun 13 20:50:03 2009 +0200
  46. 06a819c ARM: Add macros.h to be used in assembler file. by Jean-Christophe PLAGNIOL-VILLARD · Sat Jun 13 20:50:02 2009 +0200
  47. 4133f65 MX31: Add NAND SPL for i.MX31. by Magnus Lilja · Sat Jun 13 20:50:01 2009 +0200
  48. e32eb4c at91: unify nor boot support by Jean-Christophe PLAGNIOL-VILLARD · Sat Jun 13 12:50:04 2009 +0200
  49. 0ae32d9 pm9263: use macro instead of hardcode value for the lowlevel_init by Jean-Christophe PLAGNIOL-VILLARD · Fri Jun 12 21:20:38 2009 +0200
  50. e338f7e DaVinci Network Driver Updates by s-paulraj@ti.com · Tue May 12 11:45:34 2009 -0400
  51. 9819670 arch_misc_init support for ARM architectures by Prafulla Wadaskar · Sun May 31 14:53:20 2009 +0200
  52. b21aa66 at91: move cpu name define to arm/arch/ cpu header by Jean-Christophe PLAGNIOL-VILLARD · Sun May 31 12:44:46 2009 +0200
  53. da7b3db arm: unify interrupt init by Jean-Christophe PLAGNIOL-VILLARD · Sat May 09 13:21:18 2009 +0200
  54. 5bcea06 ARM DaVinci: Minor Updates to base addresses by s-paulraj@ti.com · Fri May 15 23:48:36 2009 +0200
  55. dd2d1cc OMAP3 Port kernel omap gpio interface. by Tom Rix · Fri May 15 23:48:36 2009 +0200
  56. 9c954ae ARM: Update mach-types by Jean-Christophe PLAGNIOL-VILLARD · Fri May 15 23:47:13 2009 +0200
  57. 4506400 davinci: display correct clock info by David Brownell · Fri May 15 23:47:12 2009 +0200
  58. 8c9fc00 arm: timer and interrupt init rework by Jean-Christophe PLAGNIOL-VILLARD · Fri May 15 23:47:02 2009 +0200
  59. 6f7e639 davinci: add basic dm355/dm350/dm335 support by David Brownell · Fri May 15 23:44:09 2009 +0200
  60. 3e03029 davinci: move psc support board-->cpu by David Brownell · Fri May 15 23:44:06 2009 +0200
  61. 5359ace ARM: fix PXA build by defining UP2OCR by Daniel Mack · Tue May 05 12:48:29 2009 +0200
  62. f1b3f2b Fix e-mail address of Gary Jennejohn. by Detlev Zundel · Wed May 13 10:54:10 2009 +0200
  63. fcbb44f OMAP3: Print correct silicon revision by Sanjeev Premi · Mon Apr 27 21:27:54 2009 +0530
  64. 776eac2 OMAP3: Remove unused board-types by Sanjeev Premi · Mon Apr 27 21:27:44 2009 +0530
  65. e32ef2e OMAP3: Use functions print_cpuinfo() and checkboard() by Sanjeev Premi · Mon Apr 27 21:27:27 2009 +0530
  66. 8b954a9 at91: add support for the PM9263 board of Ronetix GmbH by Ilko Iliev · Thu Apr 16 21:30:48 2009 +0200
  67. 23164f1 at91sam9/at91cap: improve clock framework by Jean-Christophe PLAGNIOL-VILLARD · Thu Apr 16 21:30:44 2009 +0200
  68. a954f1a Support for PXA27X UDC. by Remy Bohmer · Sun Apr 05 11:43:28 2009 +0200
  69. 9053b5a arm: update co-processor 15 access by Jean-Christophe PLAGNIOL-VILLARD · Sun Apr 05 13:02:43 2009 +0200
  70. d5ee38e at91sam9: add watchdog support by Jean-Christophe PLAGNIOL-VILLARD · Fri Mar 27 23:26:42 2009 +0100
  71. bc57ce3 s3c4510b: move specific code to soc directory by Jean-Christophe PLAGNIOL-VILLARD · Sun Mar 29 23:01:36 2009 +0200
  72. 4ef545e at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. by Nicolas Ferre · Sun Mar 22 14:48:16 2009 +0100
  73. fafa923 at91sam9/at91cap: move common macb initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · Sat Mar 21 21:08:00 2009 +0100
  74. 4fc81fb at91sam9/at91cap: move common usb host initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · Sat Mar 21 21:08:00 2009 +0100
  75. 12dcdef at91sam9/at91cap: move common spi initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · Sat Mar 21 21:07:59 2009 +0100
  76. 6b0b3db at91sam9/at91cap: move common serial initialisation to cpu by Jean-Christophe PLAGNIOL-VILLARD · Sat Mar 21 21:07:59 2009 +0100
  77. c2aef50 remove bi_enet*addr from global data for all arches by Mike Frysinger · Wed Feb 11 18:26:08 2009 -0500
  78. 12dbcf6 OMAP3: Add support for OMAP3 die ID by Dirk Behme · Thu Mar 12 19:30:50 2009 +0100
  79. e99f10a ARM: add an "eet" variant of the imx31_phycore board by Guennadi Liakhovetski · Tue Feb 24 10:44:02 2009 +0100
  80. 7c6a856 i.MX31: add a simple gpio driver by Guennadi Liakhovetski · Sat Feb 07 01:18:07 2009 +0100
  81. 15e6c70 ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5 by Wolfgang Denk · Sun Feb 22 23:45:40 2009 +0100
  82. ddd99a1 OMAP3: Clean up MMC code by Dirk Behme · Fri Feb 20 17:51:28 2009 +0100
  83. 2d0d4fa OMAP3: Add OMAP3 auto detection by Dirk Behme · Thu Feb 12 18:55:42 2009 +0100
  84. 7871611 OMAP3: Beagle: Add board revision detection by Dirk Behme · Thu Feb 12 18:55:41 2009 +0100
  85. 413fc0a Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · Thu Feb 19 00:46:32 2009 +0100
  86. 724ecf0 Eliminated arch-specific mmc header requirement by Andy Fleming · Thu Oct 30 16:31:39 2008 -0500
  87. fb718e1 Coding style cleanup; update CHANGELOG by Wolfgang Denk · Thu Feb 12 00:08:39 2009 +0100
  88. 4c88289 Add an architecture specific config.h for common defines by Kumar Gala · Thu Feb 05 20:40:57 2009 -0600
  89. bd29695 mx31: add GPIO registers definitions by Ilya Yanok · Sun Feb 08 00:59:43 2009 +0300
  90. 5648e51 OMAP3: Add I2C support by Dirk Behme · Sun Dec 14 09:47:18 2008 +0100
  91. 9721eda OMAP3: Add MMC support by Dirk Behme · Sun Dec 14 09:47:17 2008 +0100
  92. a1aa39c OMAP3: Add OMAP3, memory and function prototype headers by Dirk Behme · Sun Dec 14 09:47:12 2008 +0100
  93. deccb10 OMAP3: Add pin mux, clock and cpu headers by Dirk Behme · Sun Dec 14 09:47:11 2008 +0100
  94. fd24e75 bugfix for i.mx31 CCM_UPCTL reg by Maxim Artamonov · Wed Dec 03 05:38:17 2008 +0300
  95. 8c45a9e at91rm9200: move define from lowlevel_init to header by Jean-Christophe PLAGNIOL-VILLARD · Tue Jan 06 21:41:59 2009 +0100
  96. 9364a67 Introduce virt_to_phys() by Kumar Gala · Sat Dec 13 17:20:27 2008 -0600
  97. abaacb6 AT91: Replace AT91_BASE_EMAC by the board specific values. by Stelian Pop · Fri Nov 07 13:54:31 2008 +0100
  98. d8946fe atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h> by Haavard Skinnemoen · Mon Sep 01 16:21:18 2008 +0200
  99. 0383694 rename CFG_ macros to CONFIG_SYS by Jean-Christophe PLAGNIOL-VILLARD · Thu Oct 16 15:01:15 2008 +0200
  100. da17154 ARM: synchronize mach-types.h with linux 2.6.27-rc6 by Jean-Christophe PLAGNIOL-VILLARD · Fri Sep 12 02:20:47 2008 +0200